| Message ID | 20200329170538.25449-7-pragnesh.patel@sifive.com |
|---|---|
| State | Superseded |
| Delegated to: | Andes |
| Headers | show |
| Series | RISC-V SiFive FU540 support SPL | expand |
On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel <pragnesh.patel@sifive.com> wrote: > > Add driver for fu540 to support ddr initialization in SPL. > This driver is based on FSBL > (https://github.com/sifive/freedom-u540-c000-bootloader.git) > > Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> > --- > drivers/ram/Kconfig | 7 + > drivers/ram/Makefile | 2 + > drivers/ram/sifive/Kconfig | 8 + > drivers/ram/sifive/Makefile | 6 + > drivers/ram/sifive/sdram_fu540.c | 399 +++++++++++++++++++++++++++++++ > 5 files changed, 422 insertions(+) > create mode 100644 drivers/ram/sifive/Kconfig > create mode 100644 drivers/ram/sifive/Makefile > create mode 100644 drivers/ram/sifive/sdram_fu540.c > > diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig > index 56fea7c94c..c60c63204c 100644 > --- a/drivers/ram/Kconfig > +++ b/drivers/ram/Kconfig > @@ -73,5 +73,12 @@ config IMXRT_SDRAM > to support external memories like sdram, psram & nand. > This driver is for the sdram memory interface with the SEMC. > > +config SIFIVE_DDR > + bool "Enable SiFive DDR support" > + depends on RAM > + help > + Enable support for the internal DDR Memory Controller of SiFive SoCs. > + > source "drivers/ram/rockchip/Kconfig" > source "drivers/ram/stm32mp1/Kconfig" > +source "drivers/ram/sifive/Kconfig" > diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile > index 5c897410c6..12bf61510b 100644 > --- a/drivers/ram/Makefile > +++ b/drivers/ram/Makefile > @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ > obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/ > > obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o > + > +obj-$(CONFIG_SIFIVE_DDR) += sifive/ > diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig > new file mode 100644 > index 0000000000..b754700db8 > --- /dev/null > +++ b/drivers/ram/sifive/Kconfig > @@ -0,0 +1,8 @@ > +config SIFIVE_FU540_DDR > + bool "SiFive FU540 DDR driver" > + depends on DM && OF_CONTROL DM is already attached for ram drivers, OF_CONTROL for sifive board. So drop these. > + select RAM > + select SPL_RAM if SPL > + select SIFIVE_DDR This looks an unconventional way to select the root ram config, try this. config RAM_SIFIVE bool "Ram drivers support for SiFive SoCs" depends on RAM help Enable support for the internal DDR Memory Controller of SiFive SoCs. if RAM_SIFIVE config RAM_SIFIVE_FU540 bool "SiFive FU540 DDR driver" default TARGET_SIFIVE_FU540 help endif # RAM_SIFIVE in defconfig or board kconfig select RAM select SPL_RAM if SPL > + help > + This enables DDR support for the platforms based on SiFive FU540 SoC. > diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile > new file mode 100644 > index 0000000000..0187805199 > --- /dev/null > +++ b/drivers/ram/sifive/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Copyright (c) 2020 SiFive, Inc > +# > + > +obj-$(CONFIG_SIFIVE_FU540_DDR) += sdram_fu540.o > diff --git a/drivers/ram/sifive/sdram_fu540.c b/drivers/ram/sifive/sdram_fu540.c > new file mode 100644 > index 0000000000..6e6c551ced > --- /dev/null > +++ b/drivers/ram/sifive/sdram_fu540.c > @@ -0,0 +1,399 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * (C) Copyright 2020 SiFive, Inc. > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel@sifive.com> > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <init.h> > +#include <ram.h> > +#include <regmap.h> > +#include <syscon.h> > +#include <asm/io.h> > + > +#define DENALI_CTL_0 0 > +#define DENALI_CTL_21 21 > +#define DENALI_CTL_120 120 > +#define DENALI_CTL_132 132 > +#define DENALI_CTL_136 136 > +#define DENALI_CTL_170 170 > +#define DENALI_CTL_181 181 > +#define DENALI_CTL_182 182 > +#define DENALI_CTL_184 184 > +#define DENALI_CTL_208 208 > +#define DENALI_CTL_209 209 > +#define DENALI_CTL_210 210 > +#define DENALI_CTL_212 212 > +#define DENALI_CTL_214 214 > +#define DENALI_CTL_216 216 > +#define DENALI_CTL_224 224 > +#define DENALI_CTL_225 225 > +#define DENALI_CTL_260 260 > + > +#define DENALI_PHY_1152 1152 > +#define DENALI_PHY_1214 1214 > + > +#define PAYLOAD_DEST 0x80000000 > +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL) > + > +#define DRAM_CLASS_OFFSET 8 > +#define DRAM_CLASS_DDR4 0xA > +#define OPTIMAL_RMODW_EN_OFFSET 0 > +#define DISABLE_RD_INTERLEAVE_OFFSET 16 > +#define OUT_OF_RANGE_OFFSET 1 > +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 > +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 > +#define MC_INIT_COMPLETE_OFFSET 8 > +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 > +#define DFI_PHY_WRLELV_MODE_OFFSET 24 > +#define DFI_PHY_RDLVL_MODE_OFFSET 24 > +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 > +#define VREF_EN_OFFSET 24 > +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 > +#define AXI0_ADDRESS_RANGE_ENABLE 8 > +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 > +#define RDLVL_EN_OFFSET 16 > +#define RDLVL_GATE_EN_OFFSET 24 > +#define WRLVL_EN_OFFSET 0 > + > +#define PHY_RX_CAL_DQ0_0_OFFSET 0 > +#define PHY_RX_CAL_DQ1_0_OFFSET 16 > + > +struct fu540_ddrctl { > + volatile u32 denali_ctl[265]; > +}; > + > +struct fu540_ddrphy { > + volatile u32 denali_phy[1215]; > +}; > + > +/** > + * struct ddr_info > + * > + * @dev : pointer for the device > + * @info : UCLASS RAM information > + * @ctl : DDR controller base address > + * @phy : DDR PHY base address > + * @ctrl : DDR control base address > + * @physical_filter_ctrl : DDR physical filter control base address > + */ > +struct ddr_info { > + struct udevice *dev; > + struct ram_info info; > + struct fu540_ddrctl *ctl; > + struct fu540_ddrphy *phy; > + u32 *physical_filter_ctrl; > +}; > + > +#if defined(CONFIG_TPL_BUILD) || \ > + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) > + > +struct fu540_sdram_params { > + struct fu540_ddrctl pctl_regs; > + struct fu540_ddrphy phy_regs; > +}; > + > +struct sifive_dmc_plat { > +#if CONFIG_IS_ENABLED(OF_PLATDATA) > + struct dtd_sifive_fu540_dmc dtplat; > +#else > + struct fu540_sdram_params sdram_params; > +#endif > +}; > + > +/* n: Unit bytes */ > +static void sdram_copy_to_reg(volatile u32 *dest, > + volatile u32 *src, u32 n) > +{ > + int i; > + > + for (i = 0; i < n / sizeof(u32); i++) { > + writel(*src, dest); > + src++; > + dest++; > + } > +} Can you push to the common code area, there are some other drivers using this similar. > + > +static void ddr_setuprangeprotection(volatile u32 *ctl, u64 end_addr) > +{ > + u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; > + > + writel(0x0, DENALI_CTL_209 + ctl); > + writel(end_addr_16kblocks, DENALI_CTL_210 + ctl); > + writel(0x0, DENALI_CTL_212 + ctl); > + writel(0x0, DENALI_CTL_214 + ctl); > + writel(0x0, DENALI_CTL_216 + ctl); > + setbits_le32(DENALI_CTL_224 + ctl, > + 0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET); > + writel(0xFFFFFFFF, DENALI_CTL_225 + ctl); > + setbits_le32(DENALI_CTL_208 + ctl, 0x1 << AXI0_ADDRESS_RANGE_ENABLE); > + setbits_le32(DENALI_CTL_208 + ctl, > + 0x1 << PORT_ADDR_PROTECTION_EN_OFFSET); Any macros for these magic numbers., at least for what you know of. > +} > + > +static void ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl, u64 ddr_end) > +{ > + int val; > + > + volatile u64 *filterreg = (volatile u64 *)physical_filter_ctrl; > + > + setbits_le32(DENALI_CTL_0 + ctl, 0x1); > + > + do { > + val = readl(DENALI_CTL_132 + ctl) & > + (1 << MC_INIT_COMPLETE_OFFSET); > + } while (val == 0); > + > + /* Disable the BusBlocker in front of the controller AXI slave ports */ > + filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2); ditto. > +} > + > +static void check_errata(u32 regbase, u32 updownreg) > +{ > + /* return bitmask of failed lanes */ unconventional comment at beginning of function. > + u64 fails = 0; > + u32 dq = 0; > + u32 down, up; > + u8 failc0, failc1; > + u32 phy_rx_cal_dqn_0_offset; > + > + for (u32 bit = 0; bit < 2; bit++) { > + if (bit == 0) { > + phy_rx_cal_dqn_0_offset = > + PHY_RX_CAL_DQ0_0_OFFSET; > + } else { > + phy_rx_cal_dqn_0_offset = > + PHY_RX_CAL_DQ1_0_OFFSET; > + } > + > + down = (updownreg >> > + phy_rx_cal_dqn_0_offset) & 0x3F; > + up = (updownreg >> > + (phy_rx_cal_dqn_0_offset + 6)) & > + 0x3F; > + > + failc0 = ((down == 0) && (up == 0x3F)); > + failc1 = ((up == 0) && (down == 0x3F)); magic numbers? > + > + /* print error message on failure */ > + if (failc0 || failc1) { > + if (fails == 0) > + printf("DDR error in fixing up\n"); > + > + fails |= (1 << dq); > + > + char slicelsc = '0'; > + char slicemsc = '0'; > + > + slicelsc += (dq % 10); > + slicemsc += (dq / 10); > + printf("S "); > + printf("%c", slicemsc); > + printf("%c", slicelsc); > + > + if (failc0) > + printf("U"); > + else > + printf("D"); > + > + printf("\n"); > + } > + dq++; > + } > +} > + > +static u64 ddr_phy_fixup(volatile u32 *ddrphyreg) > +{ > + u32 slicebase = 0; > + > + /* check errata condition */ > + for (u32 slice = 0; slice < 8; slice++) { > + u32 regbase = slicebase + 34; > + > + for (u32 reg = 0; reg < 4; reg++) { > + u32 updownreg = readl(regbase + reg + ddrphyreg); > + > + check_errata(regbase, updownreg); > + } > + slicebase += 128; > + } > + > + return(0); > +} > + > +static u32 ddr_getdramclass(volatile u32 *ctl) > +{ > + u32 reg = readl(DENALI_CTL_0 + ctl); > + > + return ((reg >> DRAM_CLASS_OFFSET) & 0xF); ditto > +} > + > +static int fu540_ddr_setup(struct udevice *dev) > +{ > + struct ddr_info *priv = dev_get_priv(dev); > + struct sifive_dmc_plat *plat = dev_get_platdata(dev); > + struct fu540_sdram_params *params = &plat->sdram_params; > + > + int ret, i; > + u32 physet; > + const u64 ddr_size = DDR_MEM_SIZE; > + const u64 ddr_end = PAYLOAD_DEST + ddr_size; > + > + volatile u32 *denali_ctl = &priv->ctl->denali_ctl[0]; > + volatile u32 *denali_phy = &priv->phy->denali_phy[0]; > + drop the above spaces. > + ret = dev_read_u32_array(dev, "sifive,sdram-params", > + (u32 *)&plat->sdram_params, > + sizeof(plat->sdram_params) / sizeof(u32)); > + if (ret) { > + printf("%s: Cannot read sifive,sdram-params %d\n", > + __func__, ret); > + return ret; > + } > + > + sdram_copy_to_reg(&priv->ctl->denali_ctl[0], > + ¶ms->pctl_regs.denali_ctl[0], > + sizeof(struct fu540_ddrctl)); > + > + /* phy reset */ > + for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) { > + physet = params->phy_regs.denali_phy[i]; > + priv->phy->denali_phy[i] = physet; > + } > + > + for (i = 0; i < DENALI_PHY_1152; i++) { > + physet = params->phy_regs.denali_phy[i]; > + priv->phy->denali_phy[i] = physet; > + } > + > + /* Disable read interleave DENALI_CTL_120 */ > + setbits_le32(DENALI_CTL_120 + denali_ctl, > + 1 << DISABLE_RD_INTERLEAVE_OFFSET); > + > + /* Disable optimal read/modify/write logic DENALI_CTL_21 */ > + clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 << OPTIMAL_RMODW_EN_OFFSET); > + > + /* Enable write Leveling DENALI_CTL_170 */ > + setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET) > + | (1 << DFI_PHY_WRLELV_MODE_OFFSET)); > + > + /* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */ > + setbits_le32(DENALI_CTL_181 + denali_ctl, > + 1 << DFI_PHY_RDLVL_MODE_OFFSET); > + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_EN_OFFSET); > + > + /* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */ > + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_GATE_EN_OFFSET); > + setbits_le32(DENALI_CTL_182 + denali_ctl, > + 1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET); > + > + if (ddr_getdramclass(denali_ctl) == DRAM_CLASS_DDR4) { > + /* Enable vref training DENALI_CTL_184 */ > + setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET); > + } > + > + /* Mask off leveling completion interrupt DENALI_CTL_136 */ > + setbits_le32(DENALI_CTL_136 + denali_ctl, > + 1 << LEVELING_OPERATION_COMPLETED_OFFSET); > + > + /* Mask off MC init complete interrupt DENALI_CTL_136 */ > + setbits_le32(DENALI_CTL_136 + denali_ctl, 1 << MC_INIT_COMPLETE_OFFSET); > + > + /* Mask off out of range interrupts DENALI_CTL_136 */ > + setbits_le32(DENALI_CTL_136 + denali_ctl, (1 << OUT_OF_RANGE_OFFSET) > + | (1 << MULTIPLE_OUT_OF_RANGE_OFFSET)); > + > + /* set up range protection */ > + ddr_setuprangeprotection(denali_ctl, DDR_MEM_SIZE); > + > + /* Mask off port command error interrupt DENALI_CTL_136 */ > + setbits_le32(DENALI_CTL_136 + denali_ctl, > + 1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET); > + > + ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end); > + > + ddr_phy_fixup(denali_phy); > + > + /* check size */ > + priv->info.size = get_ram_size((long *)priv->info.base, > + DDR_MEM_SIZE); > + > + printf("priv->info.size = %lx\n", priv->info.size); > + debug("%s : %lx\n", __func__, priv->info.size); > + > + /* check memory access for all memory */ > + no space. Jagan.
Hi Jagan, >-----Original Message----- >From: Jagan Teki <jagan@amarulasolutions.com> >Sent: 07 April 2020 00:58 >To: Pragnesh Patel <pragnesh.patel@sifive.com> >Cc: U-Boot-Denx <u-boot@lists.denx.de>; Atish Patra ><atish.patra@wdc.com>; palmerdabbelt@google.com; Bin Meng ><bmeng.cn@gmail.com>; Paul Walmsley <paul.walmsley@sifive.com>; Troy >Benjegerdes <troy.benjegerdes@sifive.com>; Anup Patel ><anup.patel@wdc.com>; Sagar Kadam <sagar.kadam@sifive.com>; Rick Chen ><rick@andestech.com>; Kever Yang <kever.yang@rock-chips.com>; Lokesh >Vutla <lokeshvutla@ti.com>; YouMin Chen <cym@rock-chips.com>; Giulio >Benetti <giulio.benetti@benettiengineering.com>; Kevin Scholz <k- >scholz@ti.com> >Subject: Re: [PATCH v6 06/17] sifive: fu540: add ddr driver > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel ><pragnesh.patel@sifive.com> wrote: >> >> Add driver for fu540 to support ddr initialization in SPL. >> This driver is based on FSBL >> (https://github.com/sifive/freedom-u540-c000-bootloader.git) >> >> Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> >> --- >> drivers/ram/Kconfig | 7 + >> drivers/ram/Makefile | 2 + >> drivers/ram/sifive/Kconfig | 8 + >> drivers/ram/sifive/Makefile | 6 + >> drivers/ram/sifive/sdram_fu540.c | 399 >> +++++++++++++++++++++++++++++++ >> 5 files changed, 422 insertions(+) >> create mode 100644 drivers/ram/sifive/Kconfig create mode 100644 >> drivers/ram/sifive/Makefile create mode 100644 >> drivers/ram/sifive/sdram_fu540.c >> >> diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index >> 56fea7c94c..c60c63204c 100644 >> --- a/drivers/ram/Kconfig >> +++ b/drivers/ram/Kconfig >> @@ -73,5 +73,12 @@ config IMXRT_SDRAM >> to support external memories like sdram, psram & nand. >> This driver is for the sdram memory interface with the SEMC. >> >> +config SIFIVE_DDR >> + bool "Enable SiFive DDR support" >> + depends on RAM >> + help >> + Enable support for the internal DDR Memory Controller of SiFive SoCs. >> + >> source "drivers/ram/rockchip/Kconfig" >> source "drivers/ram/stm32mp1/Kconfig" >> +source "drivers/ram/sifive/Kconfig" >> diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index >> 5c897410c6..12bf61510b 100644 >> --- a/drivers/ram/Makefile >> +++ b/drivers/ram/Makefile >> @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ >> obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/ >> >> obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o >> + >> +obj-$(CONFIG_SIFIVE_DDR) += sifive/ >> diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig >> new file mode 100644 index 0000000000..b754700db8 >> --- /dev/null >> +++ b/drivers/ram/sifive/Kconfig >> @@ -0,0 +1,8 @@ >> +config SIFIVE_FU540_DDR >> + bool "SiFive FU540 DDR driver" >> + depends on DM && OF_CONTROL > >DM is already attached for ram drivers, OF_CONTROL for sifive board. >So drop these. I will remove the DM but I think OF_CONTROL is necessary for RAM driver though it is selected for SiFive board. > >> + select RAM >> + select SPL_RAM if SPL >> + select SIFIVE_DDR > >This looks an unconventional way to select the root ram config, try this. > >config RAM_SIFIVE > bool "Ram drivers support for SiFive SoCs" > depends on RAM > help > Enable support for the internal DDR Memory Controller of SiFive >SoCs. > >if RAM_SIFIVE > >config RAM_SIFIVE_FU540 > bool "SiFive FU540 DDR driver" > default TARGET_SIFIVE_FU540 > help > >endif # RAM_SIFIVE > >in defconfig or board kconfig > >select RAM >select SPL_RAM if SPL Thanks for the correction, Will update in v7. > >> + help >> + This enables DDR support for the platforms based on SiFive FU540 >SoC. >> diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile >> new file mode 100644 index 0000000000..0187805199 >> --- /dev/null >> +++ b/drivers/ram/sifive/Makefile >> @@ -0,0 +1,6 @@ >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> +# Copyright (c) 2020 SiFive, Inc >> +# >> + >> +obj-$(CONFIG_SIFIVE_FU540_DDR) += sdram_fu540.o >> diff --git a/drivers/ram/sifive/sdram_fu540.c >> b/drivers/ram/sifive/sdram_fu540.c >> new file mode 100644 >> index 0000000000..6e6c551ced >> --- /dev/null >> +++ b/drivers/ram/sifive/sdram_fu540.c >> @@ -0,0 +1,399 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * (C) Copyright 2020 SiFive, Inc. >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel@sifive.com> >> + */ >> + >> +#include <common.h> >> +#include <dm.h> >> +#include <init.h> >> +#include <ram.h> >> +#include <regmap.h> >> +#include <syscon.h> >> +#include <asm/io.h> >> + >> +#define DENALI_CTL_0 0 >> +#define DENALI_CTL_21 21 >> +#define DENALI_CTL_120 120 >> +#define DENALI_CTL_132 132 >> +#define DENALI_CTL_136 136 >> +#define DENALI_CTL_170 170 >> +#define DENALI_CTL_181 181 >> +#define DENALI_CTL_182 182 >> +#define DENALI_CTL_184 184 >> +#define DENALI_CTL_208 208 >> +#define DENALI_CTL_209 209 >> +#define DENALI_CTL_210 210 >> +#define DENALI_CTL_212 212 >> +#define DENALI_CTL_214 214 >> +#define DENALI_CTL_216 216 >> +#define DENALI_CTL_224 224 >> +#define DENALI_CTL_225 225 >> +#define DENALI_CTL_260 260 >> + >> +#define DENALI_PHY_1152 1152 >> +#define DENALI_PHY_1214 1214 >> + >> +#define PAYLOAD_DEST 0x80000000 >> +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL) >> + >> +#define DRAM_CLASS_OFFSET 8 >> +#define DRAM_CLASS_DDR4 0xA >> +#define OPTIMAL_RMODW_EN_OFFSET 0 >> +#define DISABLE_RD_INTERLEAVE_OFFSET 16 >> +#define OUT_OF_RANGE_OFFSET 1 >> +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 >> +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 >> +#define MC_INIT_COMPLETE_OFFSET 8 >> +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 >> +#define DFI_PHY_WRLELV_MODE_OFFSET 24 >> +#define DFI_PHY_RDLVL_MODE_OFFSET 24 >> +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 >> +#define VREF_EN_OFFSET 24 >> +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 >> +#define AXI0_ADDRESS_RANGE_ENABLE 8 >> +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 >> +#define RDLVL_EN_OFFSET 16 >> +#define RDLVL_GATE_EN_OFFSET 24 >> +#define WRLVL_EN_OFFSET 0 >> + >> +#define PHY_RX_CAL_DQ0_0_OFFSET 0 >> +#define PHY_RX_CAL_DQ1_0_OFFSET 16 >> + >> +struct fu540_ddrctl { >> + volatile u32 denali_ctl[265]; >> +}; >> + >> +struct fu540_ddrphy { >> + volatile u32 denali_phy[1215]; }; >> + >> +/** >> + * struct ddr_info >> + * >> + * @dev : pointer for the device >> + * @info : UCLASS RAM information >> + * @ctl : DDR controller base address >> + * @phy : DDR PHY base address >> + * @ctrl : DDR control base address >> + * @physical_filter_ctrl : DDR physical filter control base address >> + */ >> +struct ddr_info { >> + struct udevice *dev; >> + struct ram_info info; >> + struct fu540_ddrctl *ctl; >> + struct fu540_ddrphy *phy; >> + u32 *physical_filter_ctrl; >> +}; >> + >> +#if defined(CONFIG_TPL_BUILD) || \ >> + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) >> + >> +struct fu540_sdram_params { >> + struct fu540_ddrctl pctl_regs; >> + struct fu540_ddrphy phy_regs; >> +}; >> + >> +struct sifive_dmc_plat { >> +#if CONFIG_IS_ENABLED(OF_PLATDATA) >> + struct dtd_sifive_fu540_dmc dtplat; #else >> + struct fu540_sdram_params sdram_params; #endif }; >> + >> +/* n: Unit bytes */ >> +static void sdram_copy_to_reg(volatile u32 *dest, >> + volatile u32 *src, u32 n) { >> + int i; >> + >> + for (i = 0; i < n / sizeof(u32); i++) { >> + writel(*src, dest); >> + src++; >> + dest++; >> + } >> +} > >Can you push to the common code area, there are some other drivers using >this similar. Where exactly in common ? > >> + >> +static void ddr_setuprangeprotection(volatile u32 *ctl, u64 end_addr) >> +{ >> + u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; >> + >> + writel(0x0, DENALI_CTL_209 + ctl); >> + writel(end_addr_16kblocks, DENALI_CTL_210 + ctl); >> + writel(0x0, DENALI_CTL_212 + ctl); >> + writel(0x0, DENALI_CTL_214 + ctl); >> + writel(0x0, DENALI_CTL_216 + ctl); >> + setbits_le32(DENALI_CTL_224 + ctl, >> + 0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET); >> + writel(0xFFFFFFFF, DENALI_CTL_225 + ctl); >> + setbits_le32(DENALI_CTL_208 + ctl, 0x1 << >AXI0_ADDRESS_RANGE_ENABLE); >> + setbits_le32(DENALI_CTL_208 + ctl, >> + 0x1 << PORT_ADDR_PROTECTION_EN_OFFSET); > >Any macros for these magic numbers., at least for what you know of. This is something copied from FSBL. Right now I don't have any idea on this. Due to NDA issues, we can not open source some information. > >> +} >> + >> +static void ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl, >> +u64 ddr_end) { >> + int val; >> + >> + volatile u64 *filterreg = (volatile u64 >> + *)physical_filter_ctrl; >> + >> + setbits_le32(DENALI_CTL_0 + ctl, 0x1); >> + >> + do { >> + val = readl(DENALI_CTL_132 + ctl) & >> + (1 << MC_INIT_COMPLETE_OFFSET); >> + } while (val == 0); >> + >> + /* Disable the BusBlocker in front of the controller AXI slave ports */ >> + filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2); > >ditto. As written above. > >> +} >> + >> +static void check_errata(u32 regbase, u32 updownreg) { >> + /* return bitmask of failed lanes */ > >unconventional comment at beginning of function. Will remove. > >> + u64 fails = 0; >> + u32 dq = 0; >> + u32 down, up; >> + u8 failc0, failc1; >> + u32 phy_rx_cal_dqn_0_offset; >> + >> + for (u32 bit = 0; bit < 2; bit++) { >> + if (bit == 0) { >> + phy_rx_cal_dqn_0_offset = >> + PHY_RX_CAL_DQ0_0_OFFSET; >> + } else { >> + phy_rx_cal_dqn_0_offset = >> + PHY_RX_CAL_DQ1_0_OFFSET; >> + } >> + >> + down = (updownreg >> >> + phy_rx_cal_dqn_0_offset) & 0x3F; >> + up = (updownreg >> >> + (phy_rx_cal_dqn_0_offset + 6)) & >> + 0x3F; >> + >> + failc0 = ((down == 0) && (up == 0x3F)); >> + failc1 = ((up == 0) && (down == 0x3F)); > >magic numbers? This is something copied from FSBL. > >> + >> + /* print error message on failure */ >> + if (failc0 || failc1) { >> + if (fails == 0) >> + printf("DDR error in fixing up\n"); >> + >> + fails |= (1 << dq); >> + >> + char slicelsc = '0'; >> + char slicemsc = '0'; >> + >> + slicelsc += (dq % 10); >> + slicemsc += (dq / 10); >> + printf("S "); >> + printf("%c", slicemsc); >> + printf("%c", slicelsc); >> + >> + if (failc0) >> + printf("U"); >> + else >> + printf("D"); >> + >> + printf("\n"); >> + } >> + dq++; >> + } >> +} >> + >> +static u64 ddr_phy_fixup(volatile u32 *ddrphyreg) { >> + u32 slicebase = 0; >> + >> + /* check errata condition */ >> + for (u32 slice = 0; slice < 8; slice++) { >> + u32 regbase = slicebase + 34; >> + >> + for (u32 reg = 0; reg < 4; reg++) { >> + u32 updownreg = readl(regbase + reg + >> + ddrphyreg); >> + >> + check_errata(regbase, updownreg); >> + } >> + slicebase += 128; >> + } >> + >> + return(0); >> +} >> + >> +static u32 ddr_getdramclass(volatile u32 *ctl) { >> + u32 reg = readl(DENALI_CTL_0 + ctl); >> + >> + return ((reg >> DRAM_CLASS_OFFSET) & 0xF); > >ditto Same as above > >> +} >> + >> +static int fu540_ddr_setup(struct udevice *dev) { >> + struct ddr_info *priv = dev_get_priv(dev); >> + struct sifive_dmc_plat *plat = dev_get_platdata(dev); >> + struct fu540_sdram_params *params = &plat->sdram_params; >> + >> + int ret, i; >> + u32 physet; >> + const u64 ddr_size = DDR_MEM_SIZE; >> + const u64 ddr_end = PAYLOAD_DEST + ddr_size; >> + >> + volatile u32 *denali_ctl = &priv->ctl->denali_ctl[0]; >> + volatile u32 *denali_phy = &priv->phy->denali_phy[0]; >> + > >drop the above spaces. Will do. > >> + ret = dev_read_u32_array(dev, "sifive,sdram-params", >> + (u32 *)&plat->sdram_params, >> + sizeof(plat->sdram_params) / sizeof(u32)); >> + if (ret) { >> + printf("%s: Cannot read sifive,sdram-params %d\n", >> + __func__, ret); >> + return ret; >> + } >> + >> + sdram_copy_to_reg(&priv->ctl->denali_ctl[0], >> + ¶ms->pctl_regs.denali_ctl[0], >> + sizeof(struct fu540_ddrctl)); >> + >> + /* phy reset */ >> + for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) { >> + physet = params->phy_regs.denali_phy[i]; >> + priv->phy->denali_phy[i] = physet; >> + } >> + >> + for (i = 0; i < DENALI_PHY_1152; i++) { >> + physet = params->phy_regs.denali_phy[i]; >> + priv->phy->denali_phy[i] = physet; >> + } >> + >> + /* Disable read interleave DENALI_CTL_120 */ >> + setbits_le32(DENALI_CTL_120 + denali_ctl, >> + 1 << DISABLE_RD_INTERLEAVE_OFFSET); >> + >> + /* Disable optimal read/modify/write logic DENALI_CTL_21 */ >> + clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 << >> + OPTIMAL_RMODW_EN_OFFSET); >> + >> + /* Enable write Leveling DENALI_CTL_170 */ >> + setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET) >> + | (1 << DFI_PHY_WRLELV_MODE_OFFSET)); >> + >> + /* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */ >> + setbits_le32(DENALI_CTL_181 + denali_ctl, >> + 1 << DFI_PHY_RDLVL_MODE_OFFSET); >> + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << >> + RDLVL_EN_OFFSET); >> + >> + /* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */ >> + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << >RDLVL_GATE_EN_OFFSET); >> + setbits_le32(DENALI_CTL_182 + denali_ctl, >> + 1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET); >> + >> + if (ddr_getdramclass(denali_ctl) == DRAM_CLASS_DDR4) { >> + /* Enable vref training DENALI_CTL_184 */ >> + setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET); >> + } >> + >> + /* Mask off leveling completion interrupt DENALI_CTL_136 */ >> + setbits_le32(DENALI_CTL_136 + denali_ctl, >> + 1 << LEVELING_OPERATION_COMPLETED_OFFSET); >> + >> + /* Mask off MC init complete interrupt DENALI_CTL_136 */ >> + setbits_le32(DENALI_CTL_136 + denali_ctl, 1 << >> + MC_INIT_COMPLETE_OFFSET); >> + >> + /* Mask off out of range interrupts DENALI_CTL_136 */ >> + setbits_le32(DENALI_CTL_136 + denali_ctl, (1 << >OUT_OF_RANGE_OFFSET) >> + | (1 << MULTIPLE_OUT_OF_RANGE_OFFSET)); >> + >> + /* set up range protection */ >> + ddr_setuprangeprotection(denali_ctl, DDR_MEM_SIZE); >> + >> + /* Mask off port command error interrupt DENALI_CTL_136 */ >> + setbits_le32(DENALI_CTL_136 + denali_ctl, >> + 1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET); >> + >> + ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end); >> + >> + ddr_phy_fixup(denali_phy); >> + >> + /* check size */ >> + priv->info.size = get_ram_size((long *)priv->info.base, >> + DDR_MEM_SIZE); >> + >> + printf("priv->info.size = %lx\n", priv->info.size); >> + debug("%s : %lx\n", __func__, priv->info.size); >> + >> + /* check memory access for all memory */ >> + > >no space. Will update. > >Jagan.
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 56fea7c94c..c60c63204c 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -73,5 +73,12 @@ config IMXRT_SDRAM to support external memories like sdram, psram & nand. This driver is for the sdram memory interface with the SEMC. +config SIFIVE_DDR + bool "Enable SiFive DDR support" + depends on RAM + help + Enable support for the internal DDR Memory Controller of SiFive SoCs. + source "drivers/ram/rockchip/Kconfig" source "drivers/ram/stm32mp1/Kconfig" +source "drivers/ram/sifive/Kconfig" diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index 5c897410c6..12bf61510b 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/ obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o + +obj-$(CONFIG_SIFIVE_DDR) += sifive/ diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig new file mode 100644 index 0000000000..b754700db8 --- /dev/null +++ b/drivers/ram/sifive/Kconfig @@ -0,0 +1,8 @@ +config SIFIVE_FU540_DDR + bool "SiFive FU540 DDR driver" + depends on DM && OF_CONTROL + select RAM + select SPL_RAM if SPL + select SIFIVE_DDR + help + This enables DDR support for the platforms based on SiFive FU540 SoC. diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile new file mode 100644 index 0000000000..0187805199 --- /dev/null +++ b/drivers/ram/sifive/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020 SiFive, Inc +# + +obj-$(CONFIG_SIFIVE_FU540_DDR) += sdram_fu540.o diff --git a/drivers/ram/sifive/sdram_fu540.c b/drivers/ram/sifive/sdram_fu540.c new file mode 100644 index 0000000000..6e6c551ced --- /dev/null +++ b/drivers/ram/sifive/sdram_fu540.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * (C) Copyright 2020 SiFive, Inc. + * + * Authors: + * Pragnesh Patel <pragnesh.patel@sifive.com> + */ + +#include <common.h> +#include <dm.h> +#include <init.h> +#include <ram.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> + +#define DENALI_CTL_0 0 +#define DENALI_CTL_21 21 +#define DENALI_CTL_120 120 +#define DENALI_CTL_132 132 +#define DENALI_CTL_136 136 +#define DENALI_CTL_170 170 +#define DENALI_CTL_181 181 +#define DENALI_CTL_182 182 +#define DENALI_CTL_184 184 +#define DENALI_CTL_208 208 +#define DENALI_CTL_209 209 +#define DENALI_CTL_210 210 +#define DENALI_CTL_212 212 +#define DENALI_CTL_214 214 +#define DENALI_CTL_216 216 +#define DENALI_CTL_224 224 +#define DENALI_CTL_225 225 +#define DENALI_CTL_260 260 + +#define DENALI_PHY_1152 1152 +#define DENALI_PHY_1214 1214 + +#define PAYLOAD_DEST 0x80000000 +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL) + +#define DRAM_CLASS_OFFSET 8 +#define DRAM_CLASS_DDR4 0xA +#define OPTIMAL_RMODW_EN_OFFSET 0 +#define DISABLE_RD_INTERLEAVE_OFFSET 16 +#define OUT_OF_RANGE_OFFSET 1 +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 +#define MC_INIT_COMPLETE_OFFSET 8 +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 +#define DFI_PHY_WRLELV_MODE_OFFSET 24 +#define DFI_PHY_RDLVL_MODE_OFFSET 24 +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 +#define VREF_EN_OFFSET 24 +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 +#define AXI0_ADDRESS_RANGE_ENABLE 8 +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 +#define RDLVL_EN_OFFSET 16 +#define RDLVL_GATE_EN_OFFSET 24 +#define WRLVL_EN_OFFSET 0 + +#define PHY_RX_CAL_DQ0_0_OFFSET 0 +#define PHY_RX_CAL_DQ1_0_OFFSET 16 + +struct fu540_ddrctl { + volatile u32 denali_ctl[265]; +}; + +struct fu540_ddrphy { + volatile u32 denali_phy[1215]; +}; + +/** + * struct ddr_info + * + * @dev : pointer for the device + * @info : UCLASS RAM information + * @ctl : DDR controller base address + * @phy : DDR PHY base address + * @ctrl : DDR control base address + * @physical_filter_ctrl : DDR physical filter control base address + */ +struct ddr_info { + struct udevice *dev; + struct ram_info info; + struct fu540_ddrctl *ctl; + struct fu540_ddrphy *phy; + u32 *physical_filter_ctrl; +}; + +#if defined(CONFIG_TPL_BUILD) || \ + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + +struct fu540_sdram_params { + struct fu540_ddrctl pctl_regs; + struct fu540_ddrphy phy_regs; +}; + +struct sifive_dmc_plat { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_sifive_fu540_dmc dtplat; +#else + struct fu540_sdram_params sdram_params; +#endif +}; + +/* n: Unit bytes */ +static void sdram_copy_to_reg(volatile u32 *dest, + volatile u32 *src, u32 n) +{ + int i; + + for (i = 0; i < n / sizeof(u32); i++) { + writel(*src, dest); + src++; + dest++; + } +} + +static void ddr_setuprangeprotection(volatile u32 *ctl, u64 end_addr) +{ + u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; + + writel(0x0, DENALI_CTL_209 + ctl); + writel(end_addr_16kblocks, DENALI_CTL_210 + ctl); + writel(0x0, DENALI_CTL_212 + ctl); + writel(0x0, DENALI_CTL_214 + ctl); + writel(0x0, DENALI_CTL_216 + ctl); + setbits_le32(DENALI_CTL_224 + ctl, + 0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET); + writel(0xFFFFFFFF, DENALI_CTL_225 + ctl); + setbits_le32(DENALI_CTL_208 + ctl, 0x1 << AXI0_ADDRESS_RANGE_ENABLE); + setbits_le32(DENALI_CTL_208 + ctl, + 0x1 << PORT_ADDR_PROTECTION_EN_OFFSET); +} + +static void ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl, u64 ddr_end) +{ + int val; + + volatile u64 *filterreg = (volatile u64 *)physical_filter_ctrl; + + setbits_le32(DENALI_CTL_0 + ctl, 0x1); + + do { + val = readl(DENALI_CTL_132 + ctl) & + (1 << MC_INIT_COMPLETE_OFFSET); + } while (val == 0); + + /* Disable the BusBlocker in front of the controller AXI slave ports */ + filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2); +} + +static void check_errata(u32 regbase, u32 updownreg) +{ + /* return bitmask of failed lanes */ + u64 fails = 0; + u32 dq = 0; + u32 down, up; + u8 failc0, failc1; + u32 phy_rx_cal_dqn_0_offset; + + for (u32 bit = 0; bit < 2; bit++) { + if (bit == 0) { + phy_rx_cal_dqn_0_offset = + PHY_RX_CAL_DQ0_0_OFFSET; + } else { + phy_rx_cal_dqn_0_offset = + PHY_RX_CAL_DQ1_0_OFFSET; + } + + down = (updownreg >> + phy_rx_cal_dqn_0_offset) & 0x3F; + up = (updownreg >> + (phy_rx_cal_dqn_0_offset + 6)) & + 0x3F; + + failc0 = ((down == 0) && (up == 0x3F)); + failc1 = ((up == 0) && (down == 0x3F)); + + /* print error message on failure */ + if (failc0 || failc1) { + if (fails == 0) + printf("DDR error in fixing up\n"); + + fails |= (1 << dq); + + char slicelsc = '0'; + char slicemsc = '0'; + + slicelsc += (dq % 10); + slicemsc += (dq / 10); + printf("S "); + printf("%c", slicemsc); + printf("%c", slicelsc); + + if (failc0) + printf("U"); + else + printf("D"); + + printf("\n"); + } + dq++; + } +} + +static u64 ddr_phy_fixup(volatile u32 *ddrphyreg) +{ + u32 slicebase = 0; + + /* check errata condition */ + for (u32 slice = 0; slice < 8; slice++) { + u32 regbase = slicebase + 34; + + for (u32 reg = 0; reg < 4; reg++) { + u32 updownreg = readl(regbase + reg + ddrphyreg); + + check_errata(regbase, updownreg); + } + slicebase += 128; + } + + return(0); +} + +static u32 ddr_getdramclass(volatile u32 *ctl) +{ + u32 reg = readl(DENALI_CTL_0 + ctl); + + return ((reg >> DRAM_CLASS_OFFSET) & 0xF); +} + +static int fu540_ddr_setup(struct udevice *dev) +{ + struct ddr_info *priv = dev_get_priv(dev); + struct sifive_dmc_plat *plat = dev_get_platdata(dev); + struct fu540_sdram_params *params = &plat->sdram_params; + + int ret, i; + u32 physet; + const u64 ddr_size = DDR_MEM_SIZE; + const u64 ddr_end = PAYLOAD_DEST + ddr_size; + + volatile u32 *denali_ctl = &priv->ctl->denali_ctl[0]; + volatile u32 *denali_phy = &priv->phy->denali_phy[0]; + + ret = dev_read_u32_array(dev, "sifive,sdram-params", + (u32 *)&plat->sdram_params, + sizeof(plat->sdram_params) / sizeof(u32)); + if (ret) { + printf("%s: Cannot read sifive,sdram-params %d\n", + __func__, ret); + return ret; + } + + sdram_copy_to_reg(&priv->ctl->denali_ctl[0], + ¶ms->pctl_regs.denali_ctl[0], + sizeof(struct fu540_ddrctl)); + + /* phy reset */ + for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) { + physet = params->phy_regs.denali_phy[i]; + priv->phy->denali_phy[i] = physet; + } + + for (i = 0; i < DENALI_PHY_1152; i++) { + physet = params->phy_regs.denali_phy[i]; + priv->phy->denali_phy[i] = physet; + } + + /* Disable read interleave DENALI_CTL_120 */ + setbits_le32(DENALI_CTL_120 + denali_ctl, + 1 << DISABLE_RD_INTERLEAVE_OFFSET); + + /* Disable optimal read/modify/write logic DENALI_CTL_21 */ + clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 << OPTIMAL_RMODW_EN_OFFSET); + + /* Enable write Leveling DENALI_CTL_170 */ + setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET) + | (1 << DFI_PHY_WRLELV_MODE_OFFSET)); + + /* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */ + setbits_le32(DENALI_CTL_181 + denali_ctl, + 1 << DFI_PHY_RDLVL_MODE_OFFSET); + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_EN_OFFSET); + + /* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */ + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_GATE_EN_OFFSET); + setbits_le32(DENALI_CTL_182 + denali_ctl, + 1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET); + + if (ddr_getdramclass(denali_ctl) == DRAM_CLASS_DDR4) { + /* Enable vref training DENALI_CTL_184 */ + setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET); + } + + /* Mask off leveling completion interrupt DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, + 1 << LEVELING_OPERATION_COMPLETED_OFFSET); + + /* Mask off MC init complete interrupt DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, 1 << MC_INIT_COMPLETE_OFFSET); + + /* Mask off out of range interrupts DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, (1 << OUT_OF_RANGE_OFFSET) + | (1 << MULTIPLE_OUT_OF_RANGE_OFFSET)); + + /* set up range protection */ + ddr_setuprangeprotection(denali_ctl, DDR_MEM_SIZE); + + /* Mask off port command error interrupt DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, + 1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET); + + ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end); + + ddr_phy_fixup(denali_phy); + + /* check size */ + priv->info.size = get_ram_size((long *)priv->info.base, + DDR_MEM_SIZE); + + printf("priv->info.size = %lx\n", priv->info.size); + debug("%s : %lx\n", __func__, priv->info.size); + + /* check memory access for all memory */ + + if (priv->info.size != DDR_MEM_SIZE) { + printf("DDR invalid size : 0x%lx, expected 0x%lx\n", + priv->info.size, DDR_MEM_SIZE); + return -EINVAL; + } + + return 0; +} +#endif + +static int fu540_ddr_probe(struct udevice *dev) +{ + struct ddr_info *priv = dev_get_priv(dev); + +#if defined(CONFIG_TPL_BUILD) || \ + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + struct regmap *map; + int ret; + + debug("FU540 DDR probe\n"); + priv->dev = dev; + + ret = regmap_init_mem(dev_ofnode(dev), &map); + if (ret) + return ret; + + priv->ctl = regmap_get_range(map, 0); + priv->phy = regmap_get_range(map, 1); + priv->physical_filter_ctrl = regmap_get_range(map, 2); + + priv->info.base = CONFIG_SYS_SDRAM_BASE; + + priv->info.size = 0; + return fu540_ddr_setup(dev); +#else + priv->info.base = CONFIG_SYS_SDRAM_BASE; + priv->info.size = DDR_MEM_SIZE; +#endif + return 0; +} + +static int fu540_ddr_get_info(struct udevice *dev, struct ram_info *info) +{ + struct ddr_info *priv = dev_get_priv(dev); + + *info = priv->info; + + return 0; +} + +static struct ram_ops fu540_ddr_ops = { + .get_info = fu540_ddr_get_info, +}; + +static const struct udevice_id fu540_ddr_ids[] = { + { .compatible = "sifive,fu540-c000-ddr" }, + { } +}; + +U_BOOT_DRIVER(fu540_ddr) = { + .name = "fu540_ddr", + .id = UCLASS_RAM, + .of_match = fu540_ddr_ids, + .ops = &fu540_ddr_ops, + .probe = fu540_ddr_probe, + .priv_auto_alloc_size = sizeof(struct ddr_info), +#if defined(CONFIG_TPL_BUILD) || \ + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + .platdata_auto_alloc_size = sizeof(struct sifive_dmc_plat), +#endif +};
Add driver for fu540 to support ddr initialization in SPL. This driver is based on FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> --- drivers/ram/Kconfig | 7 + drivers/ram/Makefile | 2 + drivers/ram/sifive/Kconfig | 8 + drivers/ram/sifive/Makefile | 6 + drivers/ram/sifive/sdram_fu540.c | 399 +++++++++++++++++++++++++++++++ 5 files changed, 422 insertions(+) create mode 100644 drivers/ram/sifive/Kconfig create mode 100644 drivers/ram/sifive/Makefile create mode 100644 drivers/ram/sifive/sdram_fu540.c