[16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR

Message ID	20200331180330.16.Ie45c9b3aed36a3a582774fa1dffcea89d2c4bcf4@changeid
State	Superseded
Delegated to:	Patrick Delaunay
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Patrick Delaunay <patrick.delaunay@st.com> To: <u-boot@lists.denx.de> CC: Marek Vasut <marex@denx.de>, Patrick Delaunay <patrick.delaunay@st.com>, U-Boot STM32 <uboot-stm32@st-md-mailman.stormreply.com> Subject: [PATCH 16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR Date: Tue, 31 Mar 2020 18:04:33 +0200 Message-ID: <20200331180330.16.Ie45c9b3aed36a3a582774fa1dffcea89d2c4bcf4@changeid> In-Reply-To: <20200331180330.1.Ied6708bad5048382a57618f95d67c549aae49f42@changeid> References: <20200331180330.1.Ied6708bad5048382a57618f95d67c549aae49f42@changeid> MIME-Version: 1.0 Content-Type: text/plain Precedence: list Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	[01/16] arm: stm32mp: update dependency for STM32_ETZPC \| expand [01/16] arm: stm32mp: update dependency for STM32_ETZPC [02/16] arm: stm32mp: remove dependency for STM32KEY [03/16] arm: stm32mp: reset to default environment when serial# change [04/16] arm: stm32mp: detect U-Boot version used to save environment [05/16] arm: stm32mp: spl: add bsec driver in SPL [06/16] arm: stm32mp: spl: display error in board_init_f [07/16] board: stm32mp1: Keep error led ON in case of low power detection [08/16] board: stm32mp1: update management of boot-led [09/16] board: stm32mp1: gt9147 IRQ before reset on EV1 [10/16] board: stm32mp1: set environment variable fdtfile [11/16] board: stm32mp1: check env_get result in board_late_init [12/16] board: stm32mp1: add timeout for I/O compensation ready [13/16] gpio: stm32: support gpio ops in SPL [14/16] ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX [15/16] configs: stm32mp1: activate Ethernet PHY Realtek [16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR

Message ID

20200331180330.16.Ie45c9b3aed36a3a582774fa1dffcea89d2c4bcf4@changeid

State

Superseded

Delegated to:

Patrick Delaunay

Headers

From: Patrick Delaunay <patrick.delaunay@st.com>
To: <u-boot@lists.denx.de>
CC: Marek Vasut <marex@denx.de>, Patrick Delaunay <patrick.delaunay@st.com>, 
	U-Boot STM32 <uboot-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH 16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR
Date: Tue, 31 Mar 2020 18:04:33 +0200
Message-ID: <20200331180330.16.Ie45c9b3aed36a3a582774fa1dffcea89d2c4bcf4@changeid>
In-Reply-To: <20200331180330.1.Ied6708bad5048382a57618f95d67c549aae49f42@changeid>
References: <20200331180330.1.Ied6708bad5048382a57618f95d67c549aae49f42@changeid>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: list
Errors-To: u-boot-bounces@lists.denx.de
Sender: "U-Boot" <u-boot-bounces@lists.denx.de>

Series

[01/16] arm: stm32mp: update dependency for STM32_ETZPC | expand

Add support of errno_str, used in command pmic and regulator. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> --- configs/stm32mp15_basic_defconfig | 1 + configs/stm32mp15_trusted_defconfig | 1 + 2 files changed, 2 insertions(+)

Comments

Patrice CHOTARD April 1, 2020, 8:09 a.m. UTC | #1

Hi Patrick

On 3/31/20 6:04 PM, Patrick Delaunay wrote:
> Add support of errno_str, used in command pmic and regulator.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> ---
>
>  configs/stm32mp15_basic_defconfig   | 1 +
>  configs/stm32mp15_trusted_defconfig | 1 +
>  2 files changed, 2 insertions(+)
>
> diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
> index 30cfb8d8e1..8a6201bc48 100644
> --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -144,4 +144,5 @@ CONFIG_VIDEO_STM32=y
>  CONFIG_VIDEO_STM32_DSI=y
>  CONFIG_VIDEO_STM32_MAX_XRES=1280
>  CONFIG_VIDEO_STM32_MAX_YRES=800
> +CONFIG_ERRNO_STR=y
>  CONFIG_FDT_FIXUP_PARTITIONS=y
> diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
> index aefad2b109..394df39d0a 100644
> --- a/configs/stm32mp15_trusted_defconfig
> +++ b/configs/stm32mp15_trusted_defconfig
> @@ -127,4 +127,5 @@ CONFIG_VIDEO_STM32=y
>  CONFIG_VIDEO_STM32_DSI=y
>  CONFIG_VIDEO_STM32_MAX_XRES=1280
>  CONFIG_VIDEO_STM32_MAX_YRES=800
> +CONFIG_ERRNO_STR=y
>  CONFIG_FDT_FIXUP_PARTITIONS=y

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

Thanks

diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 30cfb8d8e1..8a6201bc48 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -144,4 +144,5 @@  CONFIG_VIDEO_STM32=y
 CONFIG_VIDEO_STM32_DSI=y
 CONFIG_VIDEO_STM32_MAX_XRES=1280
 CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_ERRNO_STR=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index aefad2b109..394df39d0a 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -127,4 +127,5 @@  CONFIG_VIDEO_STM32=y
 CONFIG_VIDEO_STM32_DSI=y
 CONFIG_VIDEO_STM32_MAX_XRES=1280
 CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_ERRNO_STR=y
 CONFIG_FDT_FIXUP_PARTITIONS=y

[16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR

Commit Message

Comments

Patch