Message ID | 20200128103459.19413-15-eric.auger@redhat.com |
---|---|
State | New |
Headers | show |
Series | arm/arm64: Add ITS tests | expand |
On Tue, Jan 28, 2020 at 11:34:59AM +0100, Eric Auger wrote: > Add two new migration tests. One testing the migration of > a topology where collection were unmapped. The second test > checks the migration of the pending table. > > Signed-off-by: Eric Auger <eric.auger@redhat.com> > > --- > > v2 -> v3: > - tests belong to both its and migration groups > --- > arm/gic.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++ > arm/unittests.cfg | 16 +++++ > 2 files changed, 166 insertions(+) > > diff --git a/arm/gic.c b/arm/gic.c > index fa8626a..ec3dd3a 100644 > --- a/arm/gic.c > +++ b/arm/gic.c > @@ -195,6 +195,7 @@ static void lpi_handler(struct pt_regs *regs __unused) > smp_rmb(); /* pairs with wmb in lpi_stats_expect */ > lpi_stats.observed.cpu_id = smp_processor_id(); > lpi_stats.observed.lpi_id = irqnr; > + acked[lpi_stats.observed.cpu_id]++; > smp_wmb(); /* pairs with rmb in check_lpi_stats */ > } > > @@ -239,6 +240,18 @@ static void secondary_lpi_test(void) > while (1) > wfi(); > } > + > +static void check_lpi_hits(int *expected) > +{ > + int i; > + > + for (i = 0; i < nr_cpus; i++) { > + if (acked[i] != expected[i]) > + report(false, "expected %d LPIs on PE #%d, %d observed", > + expected[i], i, acked[i]); report_info pass = false > + } > + report(true, "check LPI on all vcpus"); report(pass, ...); > +} > #endif > > static void gicv2_ipi_send_self(void) > @@ -594,6 +607,8 @@ static void gic_test_mmio(void) > static void test_its_introspection(void) {} > static void test_its_trigger(void) {} > static void test_its_migration(void) {} > +static void test_migrate_unmapped_collection(void) {} > +static void test_its_pending_migration(void) {} I'm not sure what's worse. This pile of stubs or one #ifdef in main() wrapping all the calls. > > #else /* __arch64__ */ > > @@ -666,6 +681,18 @@ static bool its_prerequisites(int nb_cpus) > return false; > } > > +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, > + struct its_collection *col) > +{ > + if (!dev || !col) I don't think col can be null, and this doesn't look like the right place to check if dev is null. If we're bothiner to call set_lpi, then I think we should already expect dev to be good to go. > + report_abort("wrong device or collection"); > + > + its_send_mapti(dev, physid, eventid, col); > + > + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); > + its_send_invall(col); > +} > + > /* > * Setup the configuration for those mappings: > * dev_id=2 event=20 -> vcpu 3, intid=8195 > @@ -806,6 +833,121 @@ static void test_its_migration(void) > its_send_int(dev7, 255); > check_lpi_stats(); > } > + > +static void test_migrate_unmapped_collection(void) > +{ > + struct its_collection *col; > + struct its_device *dev2, *dev7; > + u8 config; > + > + if (its_setup1()) > + return; > + > + col = its_create_collection(nr_cpus - 1, nr_cpus - 1); > + dev2 = its_get_device(2); > + dev7 = its_get_device(7); > + > + /* MAPTI with the collection unmapped */ > + set_lpi(dev2, 0, 8192, col); > + > + puts("Now migrate the VM, then press a key to continue...\n"); > + (void)getchar(); > + report(true, "Migration complete"); report_info > + > + /* on the destination, map the collection */ > + its_send_mapc(col, true); > + > + lpi_stats_expect(2, 8196); > + its_send_int(dev7, 255); > + check_lpi_stats(); > + > + config = gicv3_lpi_get_config(8192); > + report(config == LPI_PROP_DEFAULT, > + "Config of LPI 8192 was properly migrated"); > + > + lpi_stats_expect(nr_cpus - 1, 8192); > + its_send_int(dev2, 0); > + check_lpi_stats(); > + > + /* unmap the collection */ > + its_send_mapc(col, false); > + > + lpi_stats_expect(-1, -1); > + its_send_int(dev2, 0); > + check_lpi_stats(); > + > + /* remap event 0 onto lpiid 8193 */ > + set_lpi(dev2, 0, 8193, col); > + lpi_stats_expect(-1, -1); > + its_send_int(dev2, 0); > + check_lpi_stats(); > + > + /* remap the collection */ > + its_send_mapc(col, true); > + lpi_stats_expect(nr_cpus - 1, 8193); > +} > + > +static void test_its_pending_migration(void) > +{ > + struct its_device *dev; > + struct its_collection *collection[2]; > + int expected[NR_CPUS]; expected = malloc(nr_cpus * sizeof(int)); I know there are other places using NR_CPUS right now that don't have to, but we shouldn't add more. Eventually I'll change the other places too. > + u64 pendbaser; > + void *ptr; > + int i; > + > + if (its_prerequisites(4)) > + return; > + > + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); > + its_send_mapd(dev, true); > + > + collection[0] = its_create_collection(nr_cpus - 1, nr_cpus - 1); > + collection[1] = its_create_collection(nr_cpus - 2, nr_cpus - 2); > + its_send_mapc(collection[0], true); > + its_send_mapc(collection[1], true); > + > + /* disable lpi at redist level */ > + gicv3_lpi_rdist_ctrl(nr_cpus - 1, false); > + gicv3_lpi_rdist_ctrl(nr_cpus - 2, false); > + > + /* even lpis are assigned to even cpu */ > + for (i = 0; i < 256; i++) { > + struct its_collection *col = i % 2 ? collection[0] : > + collection[1]; > + int vcpu = col->target_address >> 16; I'm lost with the even/odd (nr_cpus - 1)/(nr_cpus - 2) stuff, and won't it swap if nr_cpus is odd vs. even? Shouldn't we just have something like pe1 = nr_cpus - 1; pe2 = nr_cpus - 2; col1 = its_create_collection(pe1, pe1); col2 = its_create_collection(pe2, pe2); without mentioning even and odd? > + > + its_send_mapti(dev, 8192 + i, i, col); > + gicv3_lpi_set_config(8192 + i, LPI_PROP_DEFAULT); > + gicv3_lpi_set_pending_table_bit(vcpu, 8192 + i, true); > + } > + its_send_invall(collection[0]); > + its_send_invall(collection[1]); > + > + /* Set the PTZ bit on each pendbaser */ > + > + expected[nr_cpus - 1] = 128; > + expected[nr_cpus - 2] = 128; > + > + ptr = gicv3_data.redist_base[nr_cpus - 1] + GICR_PENDBASER; > + pendbaser = readq(ptr); > + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > + > + ptr = gicv3_data.redist_base[nr_cpus - 2] + GICR_PENDBASER; > + pendbaser = readq(ptr); > + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > + > + gicv3_lpi_rdist_ctrl(nr_cpus - 1, true); > + gicv3_lpi_rdist_ctrl(nr_cpus - 2, true); > + > + puts("Now migrate the VM, then press a key to continue...\n"); > + (void)getchar(); > + report(true, "Migration complete"); report_info > + > + mdelay(1000); This delay needs a comment explaining why it's here. > + > + check_lpi_hits(expected); > +} > #endif > > int main(int argc, char **argv) > @@ -847,6 +989,14 @@ int main(int argc, char **argv) > report_prefix_push(argv[1]); > test_its_migration(); > report_prefix_pop(); > + } else if (!strcmp(argv[1], "its-pending-migration")) { > + report_prefix_push(argv[1]); > + test_its_pending_migration(); > + report_prefix_pop(); > + } else if (!strcmp(argv[1], "its-migrate-unmapped-collection")) { > + report_prefix_push(argv[1]); > + test_migrate_unmapped_collection(); > + report_prefix_pop(); > } else if (strcmp(argv[1], "its-introspection") == 0) { > report_prefix_push(argv[1]); > test_its_introspection(); > diff --git a/arm/unittests.cfg b/arm/unittests.cfg > index 8b8ec79..d917157 100644 > --- a/arm/unittests.cfg > +++ b/arm/unittests.cfg > @@ -144,6 +144,22 @@ extra_params = -machine gic-version=3 -append 'its-migration' > groups = its migration > arch = arm64 > > +[its-pending-migration] > +file = gic.flat > +smp = $MAX_SMP > +accel = kvm > +extra_params = -machine gic-version=3 -append 'its-pending-migration' > +groups = its migration > +arch = arm64 > + > +[its-migrate-unmapped-collection] > +file = gic.flat > +smp = $MAX_SMP > +accel = kvm > +extra_params = -machine gic-version=3 -append 'its-migrate-unmapped-collection' > +groups = its migration > +arch = arm64 > + > # Test PSCI emulation > [psci] > file = psci.flat > -- > 2.20.1 > > Thanks, drew
Hi Drew, On 2/7/20 3:06 PM, Andrew Jones wrote: > On Tue, Jan 28, 2020 at 11:34:59AM +0100, Eric Auger wrote: >> Add two new migration tests. One testing the migration of >> a topology where collection were unmapped. The second test >> checks the migration of the pending table. >> >> Signed-off-by: Eric Auger <eric.auger@redhat.com> >> >> --- >> >> v2 -> v3: >> - tests belong to both its and migration groups >> --- >> arm/gic.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++ >> arm/unittests.cfg | 16 +++++ >> 2 files changed, 166 insertions(+) >> >> diff --git a/arm/gic.c b/arm/gic.c >> index fa8626a..ec3dd3a 100644 >> --- a/arm/gic.c >> +++ b/arm/gic.c >> @@ -195,6 +195,7 @@ static void lpi_handler(struct pt_regs *regs __unused) >> smp_rmb(); /* pairs with wmb in lpi_stats_expect */ >> lpi_stats.observed.cpu_id = smp_processor_id(); >> lpi_stats.observed.lpi_id = irqnr; >> + acked[lpi_stats.observed.cpu_id]++; >> smp_wmb(); /* pairs with rmb in check_lpi_stats */ >> } >> >> @@ -239,6 +240,18 @@ static void secondary_lpi_test(void) >> while (1) >> wfi(); >> } >> + >> +static void check_lpi_hits(int *expected) >> +{ >> + int i; >> + >> + for (i = 0; i < nr_cpus; i++) { >> + if (acked[i] != expected[i]) >> + report(false, "expected %d LPIs on PE #%d, %d observed", >> + expected[i], i, acked[i]); > > report_info > pass = false > >> + } >> + report(true, "check LPI on all vcpus"); > > report(pass, ...); I still don't get the issue. > >> +} >> #endif >> >> static void gicv2_ipi_send_self(void) >> @@ -594,6 +607,8 @@ static void gic_test_mmio(void) >> static void test_its_introspection(void) {} >> static void test_its_trigger(void) {} >> static void test_its_migration(void) {} >> +static void test_migrate_unmapped_collection(void) {} >> +static void test_its_pending_migration(void) {} > > I'm not sure what's worse. This pile of stubs or one #ifdef in main() > wrapping all the calls. Those stubs now are in the arm header. > >> >> #else /* __arch64__ */ >> >> @@ -666,6 +681,18 @@ static bool its_prerequisites(int nb_cpus) >> return false; >> } >> >> +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, >> + struct its_collection *col) >> +{ >> + if (!dev || !col) > > I don't think col can be null, and this doesn't look like the right place > to check if dev is null. If we're bothiner to call set_lpi, then I > think we should already expect dev to be good to go. put an assert() instead > >> + report_abort("wrong device or collection"); >> + >> + its_send_mapti(dev, physid, eventid, col); >> + >> + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); >> + its_send_invall(col); >> +} >> + >> /* >> * Setup the configuration for those mappings: >> * dev_id=2 event=20 -> vcpu 3, intid=8195 >> @@ -806,6 +833,121 @@ static void test_its_migration(void) >> its_send_int(dev7, 255); >> check_lpi_stats(); >> } >> + >> +static void test_migrate_unmapped_collection(void) >> +{ >> + struct its_collection *col; >> + struct its_device *dev2, *dev7; >> + u8 config; >> + >> + if (its_setup1()) >> + return; >> + >> + col = its_create_collection(nr_cpus - 1, nr_cpus - 1); >> + dev2 = its_get_device(2); >> + dev7 = its_get_device(7); >> + >> + /* MAPTI with the collection unmapped */ >> + set_lpi(dev2, 0, 8192, col); >> + >> + puts("Now migrate the VM, then press a key to continue...\n"); >> + (void)getchar(); >> + report(true, "Migration complete"); > > report_info yep > >> + >> + /* on the destination, map the collection */ >> + its_send_mapc(col, true); >> + >> + lpi_stats_expect(2, 8196); >> + its_send_int(dev7, 255); >> + check_lpi_stats(); >> + >> + config = gicv3_lpi_get_config(8192); >> + report(config == LPI_PROP_DEFAULT, >> + "Config of LPI 8192 was properly migrated"); >> + >> + lpi_stats_expect(nr_cpus - 1, 8192); >> + its_send_int(dev2, 0); >> + check_lpi_stats(); >> + >> + /* unmap the collection */ >> + its_send_mapc(col, false); >> + >> + lpi_stats_expect(-1, -1); >> + its_send_int(dev2, 0); >> + check_lpi_stats(); >> + >> + /* remap event 0 onto lpiid 8193 */ >> + set_lpi(dev2, 0, 8193, col); >> + lpi_stats_expect(-1, -1); >> + its_send_int(dev2, 0); >> + check_lpi_stats(); >> + >> + /* remap the collection */ >> + its_send_mapc(col, true); >> + lpi_stats_expect(nr_cpus - 1, 8193); >> +} >> + >> +static void test_its_pending_migration(void) >> +{ >> + struct its_device *dev; >> + struct its_collection *collection[2]; >> + int expected[NR_CPUS]; > > expected = malloc(nr_cpus * sizeof(int)); > > I know there are other places using NR_CPUS right now that don't have to, > but we shouldn't add more. Eventually I'll change the other places too. OK > >> + u64 pendbaser; >> + void *ptr; >> + int i; >> + >> + if (its_prerequisites(4)) >> + return; >> + >> + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); >> + its_send_mapd(dev, true); >> + >> + collection[0] = its_create_collection(nr_cpus - 1, nr_cpus - 1); >> + collection[1] = its_create_collection(nr_cpus - 2, nr_cpus - 2); >> + its_send_mapc(collection[0], true); >> + its_send_mapc(collection[1], true); >> + >> + /* disable lpi at redist level */ >> + gicv3_lpi_rdist_ctrl(nr_cpus - 1, false); >> + gicv3_lpi_rdist_ctrl(nr_cpus - 2, false); >> + >> + /* even lpis are assigned to even cpu */ >> + for (i = 0; i < 256; i++) { >> + struct its_collection *col = i % 2 ? collection[0] : >> + collection[1]; >> + int vcpu = col->target_address >> 16; > > I'm lost with the even/odd (nr_cpus - 1)/(nr_cpus - 2) stuff, and won't > it swap if nr_cpus is odd vs. even? > > Shouldn't we just have something like > > pe1 = nr_cpus - 1; > pe2 = nr_cpus - 2; > col1 = its_create_collection(pe1, pe1); > col2 = its_create_collection(pe2, pe2); > > without mentioning even and odd? OK > >> + >> + its_send_mapti(dev, 8192 + i, i, col); >> + gicv3_lpi_set_config(8192 + i, LPI_PROP_DEFAULT); >> + gicv3_lpi_set_pending_table_bit(vcpu, 8192 + i, true); >> + } >> + its_send_invall(collection[0]); >> + its_send_invall(collection[1]); >> + >> + /* Set the PTZ bit on each pendbaser */ >> + >> + expected[nr_cpus - 1] = 128; >> + expected[nr_cpus - 2] = 128; >> + >> + ptr = gicv3_data.redist_base[nr_cpus - 1] + GICR_PENDBASER; >> + pendbaser = readq(ptr); >> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); >> + >> + ptr = gicv3_data.redist_base[nr_cpus - 2] + GICR_PENDBASER; >> + pendbaser = readq(ptr); >> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); >> + >> + gicv3_lpi_rdist_ctrl(nr_cpus - 1, true); >> + gicv3_lpi_rdist_ctrl(nr_cpus - 2, true); >> + >> + puts("Now migrate the VM, then press a key to continue...\n"); >> + (void)getchar(); >> + report(true, "Migration complete"); > > report_info OK > >> + >> + mdelay(1000); > > This delay needs a comment explaining why it's here. OK Thanks Eric > >> + >> + check_lpi_hits(expected); >> +} >> #endif >> >> int main(int argc, char **argv) >> @@ -847,6 +989,14 @@ int main(int argc, char **argv) >> report_prefix_push(argv[1]); >> test_its_migration(); >> report_prefix_pop(); >> + } else if (!strcmp(argv[1], "its-pending-migration")) { >> + report_prefix_push(argv[1]); >> + test_its_pending_migration(); >> + report_prefix_pop(); >> + } else if (!strcmp(argv[1], "its-migrate-unmapped-collection")) { >> + report_prefix_push(argv[1]); >> + test_migrate_unmapped_collection(); >> + report_prefix_pop(); >> } else if (strcmp(argv[1], "its-introspection") == 0) { >> report_prefix_push(argv[1]); >> test_its_introspection(); >> diff --git a/arm/unittests.cfg b/arm/unittests.cfg >> index 8b8ec79..d917157 100644 >> --- a/arm/unittests.cfg >> +++ b/arm/unittests.cfg >> @@ -144,6 +144,22 @@ extra_params = -machine gic-version=3 -append 'its-migration' >> groups = its migration >> arch = arm64 >> >> +[its-pending-migration] >> +file = gic.flat >> +smp = $MAX_SMP >> +accel = kvm >> +extra_params = -machine gic-version=3 -append 'its-pending-migration' >> +groups = its migration >> +arch = arm64 >> + >> +[its-migrate-unmapped-collection] >> +file = gic.flat >> +smp = $MAX_SMP >> +accel = kvm >> +extra_params = -machine gic-version=3 -append 'its-migrate-unmapped-collection' >> +groups = its migration >> +arch = arm64 >> + >> # Test PSCI emulation >> [psci] >> file = psci.flat >> -- >> 2.20.1 >> >> > > Thanks, > drew >
On Fri, Mar 06, 2020 at 02:21:37PM +0100, Auger Eric wrote: > Hi Drew, > > On 2/7/20 3:06 PM, Andrew Jones wrote: > > On Tue, Jan 28, 2020 at 11:34:59AM +0100, Eric Auger wrote: > >> Add two new migration tests. One testing the migration of > >> a topology where collection were unmapped. The second test > >> checks the migration of the pending table. > >> > >> Signed-off-by: Eric Auger <eric.auger@redhat.com> > >> > >> --- > >> > >> v2 -> v3: > >> - tests belong to both its and migration groups > >> --- > >> arm/gic.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++ > >> arm/unittests.cfg | 16 +++++ > >> 2 files changed, 166 insertions(+) > >> > >> diff --git a/arm/gic.c b/arm/gic.c > >> index fa8626a..ec3dd3a 100644 > >> --- a/arm/gic.c > >> +++ b/arm/gic.c > >> @@ -195,6 +195,7 @@ static void lpi_handler(struct pt_regs *regs __unused) > >> smp_rmb(); /* pairs with wmb in lpi_stats_expect */ > >> lpi_stats.observed.cpu_id = smp_processor_id(); > >> lpi_stats.observed.lpi_id = irqnr; > >> + acked[lpi_stats.observed.cpu_id]++; > >> smp_wmb(); /* pairs with rmb in check_lpi_stats */ > >> } > >> > >> @@ -239,6 +240,18 @@ static void secondary_lpi_test(void) > >> while (1) > >> wfi(); > >> } > >> + > >> +static void check_lpi_hits(int *expected) > >> +{ > >> + int i; > >> + > >> + for (i = 0; i < nr_cpus; i++) { > >> + if (acked[i] != expected[i]) > >> + report(false, "expected %d LPIs on PE #%d, %d observed", > >> + expected[i], i, acked[i]); > > > > report_info > > pass = false > > > >> + } > >> + report(true, "check LPI on all vcpus"); > > > > report(pass, ...); > I still don't get the issue. Your messages aren't consistent and have dynamic info. You need report_info(...); // dynamic info if (failure_condition) { pass_boolean = false; } report(pass_boolean, single_message_for_both_pass_and_failure); > > > >> +} > >> #endif > >> > >> static void gicv2_ipi_send_self(void) > >> @@ -594,6 +607,8 @@ static void gic_test_mmio(void) > >> static void test_its_introspection(void) {} > >> static void test_its_trigger(void) {} > >> static void test_its_migration(void) {} > >> +static void test_migrate_unmapped_collection(void) {} > >> +static void test_its_pending_migration(void) {} > > > > I'm not sure what's worse. This pile of stubs or one #ifdef in main() > > wrapping all the calls. > Those stubs now are in the arm header. > > > >> > >> #else /* __arch64__ */ > >> > >> @@ -666,6 +681,18 @@ static bool its_prerequisites(int nb_cpus) > >> return false; > >> } > >> > >> +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, > >> + struct its_collection *col) > >> +{ > >> + if (!dev || !col) > > > > I don't think col can be null, and this doesn't look like the right place > > to check if dev is null. If we're bothiner to call set_lpi, then I > > think we should already expect dev to be good to go. > put an assert() instead > > > >> + report_abort("wrong device or collection"); > >> + > >> + its_send_mapti(dev, physid, eventid, col); > >> + > >> + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); > >> + its_send_invall(col); > >> +} > >> + > >> /* > >> * Setup the configuration for those mappings: > >> * dev_id=2 event=20 -> vcpu 3, intid=8195 > >> @@ -806,6 +833,121 @@ static void test_its_migration(void) > >> its_send_int(dev7, 255); > >> check_lpi_stats(); > >> } > >> + > >> +static void test_migrate_unmapped_collection(void) > >> +{ > >> + struct its_collection *col; > >> + struct its_device *dev2, *dev7; > >> + u8 config; > >> + > >> + if (its_setup1()) > >> + return; > >> + > >> + col = its_create_collection(nr_cpus - 1, nr_cpus - 1); > >> + dev2 = its_get_device(2); > >> + dev7 = its_get_device(7); > >> + > >> + /* MAPTI with the collection unmapped */ > >> + set_lpi(dev2, 0, 8192, col); > >> + > >> + puts("Now migrate the VM, then press a key to continue...\n"); > >> + (void)getchar(); > >> + report(true, "Migration complete"); > > > > report_info > yep > > > >> + > >> + /* on the destination, map the collection */ > >> + its_send_mapc(col, true); > >> + > >> + lpi_stats_expect(2, 8196); > >> + its_send_int(dev7, 255); > >> + check_lpi_stats(); > >> + > >> + config = gicv3_lpi_get_config(8192); > >> + report(config == LPI_PROP_DEFAULT, > >> + "Config of LPI 8192 was properly migrated"); > >> + > >> + lpi_stats_expect(nr_cpus - 1, 8192); > >> + its_send_int(dev2, 0); > >> + check_lpi_stats(); > >> + > >> + /* unmap the collection */ > >> + its_send_mapc(col, false); > >> + > >> + lpi_stats_expect(-1, -1); > >> + its_send_int(dev2, 0); > >> + check_lpi_stats(); > >> + > >> + /* remap event 0 onto lpiid 8193 */ > >> + set_lpi(dev2, 0, 8193, col); > >> + lpi_stats_expect(-1, -1); > >> + its_send_int(dev2, 0); > >> + check_lpi_stats(); > >> + > >> + /* remap the collection */ > >> + its_send_mapc(col, true); > >> + lpi_stats_expect(nr_cpus - 1, 8193); > >> +} > >> + > >> +static void test_its_pending_migration(void) > >> +{ > >> + struct its_device *dev; > >> + struct its_collection *collection[2]; > >> + int expected[NR_CPUS]; > > > > expected = malloc(nr_cpus * sizeof(int)); > > > > I know there are other places using NR_CPUS right now that don't have to, > > but we shouldn't add more. Eventually I'll change the other places too. > OK > > > >> + u64 pendbaser; > >> + void *ptr; > >> + int i; > >> + > >> + if (its_prerequisites(4)) > >> + return; > >> + > >> + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); > >> + its_send_mapd(dev, true); > >> + > >> + collection[0] = its_create_collection(nr_cpus - 1, nr_cpus - 1); > >> + collection[1] = its_create_collection(nr_cpus - 2, nr_cpus - 2); > >> + its_send_mapc(collection[0], true); > >> + its_send_mapc(collection[1], true); > >> + > >> + /* disable lpi at redist level */ > >> + gicv3_lpi_rdist_ctrl(nr_cpus - 1, false); > >> + gicv3_lpi_rdist_ctrl(nr_cpus - 2, false); > >> + > >> + /* even lpis are assigned to even cpu */ > >> + for (i = 0; i < 256; i++) { > >> + struct its_collection *col = i % 2 ? collection[0] : > >> + collection[1]; > >> + int vcpu = col->target_address >> 16; > > > > I'm lost with the even/odd (nr_cpus - 1)/(nr_cpus - 2) stuff, and won't > > it swap if nr_cpus is odd vs. even? > > > > Shouldn't we just have something like > > > > pe1 = nr_cpus - 1; > > pe2 = nr_cpus - 2; > > col1 = its_create_collection(pe1, pe1); > > col2 = its_create_collection(pe2, pe2); > > > > without mentioning even and odd? > OK > > > >> + > >> + its_send_mapti(dev, 8192 + i, i, col); > >> + gicv3_lpi_set_config(8192 + i, LPI_PROP_DEFAULT); > >> + gicv3_lpi_set_pending_table_bit(vcpu, 8192 + i, true); > >> + } > >> + its_send_invall(collection[0]); > >> + its_send_invall(collection[1]); > >> + > >> + /* Set the PTZ bit on each pendbaser */ > >> + > >> + expected[nr_cpus - 1] = 128; > >> + expected[nr_cpus - 2] = 128; > >> + > >> + ptr = gicv3_data.redist_base[nr_cpus - 1] + GICR_PENDBASER; > >> + pendbaser = readq(ptr); > >> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > >> + > >> + ptr = gicv3_data.redist_base[nr_cpus - 2] + GICR_PENDBASER; > >> + pendbaser = readq(ptr); > >> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > >> + > >> + gicv3_lpi_rdist_ctrl(nr_cpus - 1, true); > >> + gicv3_lpi_rdist_ctrl(nr_cpus - 2, true); > >> + > >> + puts("Now migrate the VM, then press a key to continue...\n"); > >> + (void)getchar(); > >> + report(true, "Migration complete"); > > > > report_info > OK > > > >> + > >> + mdelay(1000); > > > > This delay needs a comment explaining why it's here. > OK > > Thanks > > Eric > > > >> + > >> + check_lpi_hits(expected); > >> +} > >> #endif > >> > >> int main(int argc, char **argv) > >> @@ -847,6 +989,14 @@ int main(int argc, char **argv) > >> report_prefix_push(argv[1]); > >> test_its_migration(); > >> report_prefix_pop(); > >> + } else if (!strcmp(argv[1], "its-pending-migration")) { > >> + report_prefix_push(argv[1]); > >> + test_its_pending_migration(); > >> + report_prefix_pop(); > >> + } else if (!strcmp(argv[1], "its-migrate-unmapped-collection")) { > >> + report_prefix_push(argv[1]); > >> + test_migrate_unmapped_collection(); > >> + report_prefix_pop(); > >> } else if (strcmp(argv[1], "its-introspection") == 0) { > >> report_prefix_push(argv[1]); > >> test_its_introspection(); > >> diff --git a/arm/unittests.cfg b/arm/unittests.cfg > >> index 8b8ec79..d917157 100644 > >> --- a/arm/unittests.cfg > >> +++ b/arm/unittests.cfg > >> @@ -144,6 +144,22 @@ extra_params = -machine gic-version=3 -append 'its-migration' > >> groups = its migration > >> arch = arm64 > >> > >> +[its-pending-migration] > >> +file = gic.flat > >> +smp = $MAX_SMP > >> +accel = kvm > >> +extra_params = -machine gic-version=3 -append 'its-pending-migration' > >> +groups = its migration > >> +arch = arm64 > >> + > >> +[its-migrate-unmapped-collection] > >> +file = gic.flat > >> +smp = $MAX_SMP > >> +accel = kvm > >> +extra_params = -machine gic-version=3 -append 'its-migrate-unmapped-collection' > >> +groups = its migration > >> +arch = arm64 > >> + > >> # Test PSCI emulation > >> [psci] > >> file = psci.flat > >> -- > >> 2.20.1 > >> > >> > > > > Thanks, > > drew > > > >
Hi On 3/6/20 2:36 PM, Andrew Jones wrote: > On Fri, Mar 06, 2020 at 02:21:37PM +0100, Auger Eric wrote: >> Hi Drew, >> >> On 2/7/20 3:06 PM, Andrew Jones wrote: >>> On Tue, Jan 28, 2020 at 11:34:59AM +0100, Eric Auger wrote: >>>> Add two new migration tests. One testing the migration of >>>> a topology where collection were unmapped. The second test >>>> checks the migration of the pending table. >>>> >>>> Signed-off-by: Eric Auger <eric.auger@redhat.com> >>>> >>>> --- >>>> >>>> v2 -> v3: >>>> - tests belong to both its and migration groups >>>> --- >>>> arm/gic.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++ >>>> arm/unittests.cfg | 16 +++++ >>>> 2 files changed, 166 insertions(+) >>>> >>>> diff --git a/arm/gic.c b/arm/gic.c >>>> index fa8626a..ec3dd3a 100644 >>>> --- a/arm/gic.c >>>> +++ b/arm/gic.c >>>> @@ -195,6 +195,7 @@ static void lpi_handler(struct pt_regs *regs __unused) >>>> smp_rmb(); /* pairs with wmb in lpi_stats_expect */ >>>> lpi_stats.observed.cpu_id = smp_processor_id(); >>>> lpi_stats.observed.lpi_id = irqnr; >>>> + acked[lpi_stats.observed.cpu_id]++; >>>> smp_wmb(); /* pairs with rmb in check_lpi_stats */ >>>> } >>>> >>>> @@ -239,6 +240,18 @@ static void secondary_lpi_test(void) >>>> while (1) >>>> wfi(); >>>> } >>>> + >>>> +static void check_lpi_hits(int *expected) >>>> +{ >>>> + int i; >>>> + >>>> + for (i = 0; i < nr_cpus; i++) { >>>> + if (acked[i] != expected[i]) >>>> + report(false, "expected %d LPIs on PE #%d, %d observed", >>>> + expected[i], i, acked[i]); >>> >>> report_info >>> pass = false >>> >>>> + } >>>> + report(true, "check LPI on all vcpus"); >>> >>> report(pass, ...); >> I still don't get the issue. > > Your messages aren't consistent and have dynamic info. You need > > report_info(...); // dynamic info > if (failure_condition) { > pass_boolean = false; > } > report(pass_boolean, single_message_for_both_pass_and_failure); OK understood. Thanks! Eric > >>> >>>> +} >>>> #endif >>>> >>>> static void gicv2_ipi_send_self(void) >>>> @@ -594,6 +607,8 @@ static void gic_test_mmio(void) >>>> static void test_its_introspection(void) {} >>>> static void test_its_trigger(void) {} >>>> static void test_its_migration(void) {} >>>> +static void test_migrate_unmapped_collection(void) {} >>>> +static void test_its_pending_migration(void) {} >>> >>> I'm not sure what's worse. This pile of stubs or one #ifdef in main() >>> wrapping all the calls. >> Those stubs now are in the arm header. >>> >>>> >>>> #else /* __arch64__ */ >>>> >>>> @@ -666,6 +681,18 @@ static bool its_prerequisites(int nb_cpus) >>>> return false; >>>> } >>>> >>>> +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, >>>> + struct its_collection *col) >>>> +{ >>>> + if (!dev || !col) >>> >>> I don't think col can be null, and this doesn't look like the right place >>> to check if dev is null. If we're bothiner to call set_lpi, then I >>> think we should already expect dev to be good to go. >> put an assert() instead >>> >>>> + report_abort("wrong device or collection"); >>>> + >>>> + its_send_mapti(dev, physid, eventid, col); >>>> + >>>> + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); >>>> + its_send_invall(col); >>>> +} >>>> + >>>> /* >>>> * Setup the configuration for those mappings: >>>> * dev_id=2 event=20 -> vcpu 3, intid=8195 >>>> @@ -806,6 +833,121 @@ static void test_its_migration(void) >>>> its_send_int(dev7, 255); >>>> check_lpi_stats(); >>>> } >>>> + >>>> +static void test_migrate_unmapped_collection(void) >>>> +{ >>>> + struct its_collection *col; >>>> + struct its_device *dev2, *dev7; >>>> + u8 config; >>>> + >>>> + if (its_setup1()) >>>> + return; >>>> + >>>> + col = its_create_collection(nr_cpus - 1, nr_cpus - 1); >>>> + dev2 = its_get_device(2); >>>> + dev7 = its_get_device(7); >>>> + >>>> + /* MAPTI with the collection unmapped */ >>>> + set_lpi(dev2, 0, 8192, col); >>>> + >>>> + puts("Now migrate the VM, then press a key to continue...\n"); >>>> + (void)getchar(); >>>> + report(true, "Migration complete"); >>> >>> report_info >> yep >>> >>>> + >>>> + /* on the destination, map the collection */ >>>> + its_send_mapc(col, true); >>>> + >>>> + lpi_stats_expect(2, 8196); >>>> + its_send_int(dev7, 255); >>>> + check_lpi_stats(); >>>> + >>>> + config = gicv3_lpi_get_config(8192); >>>> + report(config == LPI_PROP_DEFAULT, >>>> + "Config of LPI 8192 was properly migrated"); >>>> + >>>> + lpi_stats_expect(nr_cpus - 1, 8192); >>>> + its_send_int(dev2, 0); >>>> + check_lpi_stats(); >>>> + >>>> + /* unmap the collection */ >>>> + its_send_mapc(col, false); >>>> + >>>> + lpi_stats_expect(-1, -1); >>>> + its_send_int(dev2, 0); >>>> + check_lpi_stats(); >>>> + >>>> + /* remap event 0 onto lpiid 8193 */ >>>> + set_lpi(dev2, 0, 8193, col); >>>> + lpi_stats_expect(-1, -1); >>>> + its_send_int(dev2, 0); >>>> + check_lpi_stats(); >>>> + >>>> + /* remap the collection */ >>>> + its_send_mapc(col, true); >>>> + lpi_stats_expect(nr_cpus - 1, 8193); >>>> +} >>>> + >>>> +static void test_its_pending_migration(void) >>>> +{ >>>> + struct its_device *dev; >>>> + struct its_collection *collection[2]; >>>> + int expected[NR_CPUS]; >>> >>> expected = malloc(nr_cpus * sizeof(int)); >>> >>> I know there are other places using NR_CPUS right now that don't have to, >>> but we shouldn't add more. Eventually I'll change the other places too. >> OK >>> >>>> + u64 pendbaser; >>>> + void *ptr; >>>> + int i; >>>> + >>>> + if (its_prerequisites(4)) >>>> + return; >>>> + >>>> + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); >>>> + its_send_mapd(dev, true); >>>> + >>>> + collection[0] = its_create_collection(nr_cpus - 1, nr_cpus - 1); >>>> + collection[1] = its_create_collection(nr_cpus - 2, nr_cpus - 2); >>>> + its_send_mapc(collection[0], true); >>>> + its_send_mapc(collection[1], true); >>>> + >>>> + /* disable lpi at redist level */ >>>> + gicv3_lpi_rdist_ctrl(nr_cpus - 1, false); >>>> + gicv3_lpi_rdist_ctrl(nr_cpus - 2, false); >>>> + >>>> + /* even lpis are assigned to even cpu */ >>>> + for (i = 0; i < 256; i++) { >>>> + struct its_collection *col = i % 2 ? collection[0] : >>>> + collection[1]; >>>> + int vcpu = col->target_address >> 16; >>> >>> I'm lost with the even/odd (nr_cpus - 1)/(nr_cpus - 2) stuff, and won't >>> it swap if nr_cpus is odd vs. even? >>> >>> Shouldn't we just have something like >>> >>> pe1 = nr_cpus - 1; >>> pe2 = nr_cpus - 2; >>> col1 = its_create_collection(pe1, pe1); >>> col2 = its_create_collection(pe2, pe2); >>> >>> without mentioning even and odd? >> OK >>> >>>> + >>>> + its_send_mapti(dev, 8192 + i, i, col); >>>> + gicv3_lpi_set_config(8192 + i, LPI_PROP_DEFAULT); >>>> + gicv3_lpi_set_pending_table_bit(vcpu, 8192 + i, true); >>>> + } >>>> + its_send_invall(collection[0]); >>>> + its_send_invall(collection[1]); >>>> + >>>> + /* Set the PTZ bit on each pendbaser */ >>>> + >>>> + expected[nr_cpus - 1] = 128; >>>> + expected[nr_cpus - 2] = 128; >>>> + >>>> + ptr = gicv3_data.redist_base[nr_cpus - 1] + GICR_PENDBASER; >>>> + pendbaser = readq(ptr); >>>> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); >>>> + >>>> + ptr = gicv3_data.redist_base[nr_cpus - 2] + GICR_PENDBASER; >>>> + pendbaser = readq(ptr); >>>> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); >>>> + >>>> + gicv3_lpi_rdist_ctrl(nr_cpus - 1, true); >>>> + gicv3_lpi_rdist_ctrl(nr_cpus - 2, true); >>>> + >>>> + puts("Now migrate the VM, then press a key to continue...\n"); >>>> + (void)getchar(); >>>> + report(true, "Migration complete"); >>> >>> report_info >> OK >>> >>>> + >>>> + mdelay(1000); >>> >>> This delay needs a comment explaining why it's here. >> OK >> >> Thanks >> >> Eric >>> >>>> + >>>> + check_lpi_hits(expected); >>>> +} >>>> #endif >>>> >>>> int main(int argc, char **argv) >>>> @@ -847,6 +989,14 @@ int main(int argc, char **argv) >>>> report_prefix_push(argv[1]); >>>> test_its_migration(); >>>> report_prefix_pop(); >>>> + } else if (!strcmp(argv[1], "its-pending-migration")) { >>>> + report_prefix_push(argv[1]); >>>> + test_its_pending_migration(); >>>> + report_prefix_pop(); >>>> + } else if (!strcmp(argv[1], "its-migrate-unmapped-collection")) { >>>> + report_prefix_push(argv[1]); >>>> + test_migrate_unmapped_collection(); >>>> + report_prefix_pop(); >>>> } else if (strcmp(argv[1], "its-introspection") == 0) { >>>> report_prefix_push(argv[1]); >>>> test_its_introspection(); >>>> diff --git a/arm/unittests.cfg b/arm/unittests.cfg >>>> index 8b8ec79..d917157 100644 >>>> --- a/arm/unittests.cfg >>>> +++ b/arm/unittests.cfg >>>> @@ -144,6 +144,22 @@ extra_params = -machine gic-version=3 -append 'its-migration' >>>> groups = its migration >>>> arch = arm64 >>>> >>>> +[its-pending-migration] >>>> +file = gic.flat >>>> +smp = $MAX_SMP >>>> +accel = kvm >>>> +extra_params = -machine gic-version=3 -append 'its-pending-migration' >>>> +groups = its migration >>>> +arch = arm64 >>>> + >>>> +[its-migrate-unmapped-collection] >>>> +file = gic.flat >>>> +smp = $MAX_SMP >>>> +accel = kvm >>>> +extra_params = -machine gic-version=3 -append 'its-migrate-unmapped-collection' >>>> +groups = its migration >>>> +arch = arm64 >>>> + >>>> # Test PSCI emulation >>>> [psci] >>>> file = psci.flat >>>> -- >>>> 2.20.1 >>>> >>>> >>> >>> Thanks, >>> drew >>> >> >>
diff --git a/arm/gic.c b/arm/gic.c index fa8626a..ec3dd3a 100644 --- a/arm/gic.c +++ b/arm/gic.c @@ -195,6 +195,7 @@ static void lpi_handler(struct pt_regs *regs __unused) smp_rmb(); /* pairs with wmb in lpi_stats_expect */ lpi_stats.observed.cpu_id = smp_processor_id(); lpi_stats.observed.lpi_id = irqnr; + acked[lpi_stats.observed.cpu_id]++; smp_wmb(); /* pairs with rmb in check_lpi_stats */ } @@ -239,6 +240,18 @@ static void secondary_lpi_test(void) while (1) wfi(); } + +static void check_lpi_hits(int *expected) +{ + int i; + + for (i = 0; i < nr_cpus; i++) { + if (acked[i] != expected[i]) + report(false, "expected %d LPIs on PE #%d, %d observed", + expected[i], i, acked[i]); + } + report(true, "check LPI on all vcpus"); +} #endif static void gicv2_ipi_send_self(void) @@ -594,6 +607,8 @@ static void gic_test_mmio(void) static void test_its_introspection(void) {} static void test_its_trigger(void) {} static void test_its_migration(void) {} +static void test_migrate_unmapped_collection(void) {} +static void test_its_pending_migration(void) {} #else /* __arch64__ */ @@ -666,6 +681,18 @@ static bool its_prerequisites(int nb_cpus) return false; } +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, + struct its_collection *col) +{ + if (!dev || !col) + report_abort("wrong device or collection"); + + its_send_mapti(dev, physid, eventid, col); + + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); + its_send_invall(col); +} + /* * Setup the configuration for those mappings: * dev_id=2 event=20 -> vcpu 3, intid=8195 @@ -806,6 +833,121 @@ static void test_its_migration(void) its_send_int(dev7, 255); check_lpi_stats(); } + +static void test_migrate_unmapped_collection(void) +{ + struct its_collection *col; + struct its_device *dev2, *dev7; + u8 config; + + if (its_setup1()) + return; + + col = its_create_collection(nr_cpus - 1, nr_cpus - 1); + dev2 = its_get_device(2); + dev7 = its_get_device(7); + + /* MAPTI with the collection unmapped */ + set_lpi(dev2, 0, 8192, col); + + puts("Now migrate the VM, then press a key to continue...\n"); + (void)getchar(); + report(true, "Migration complete"); + + /* on the destination, map the collection */ + its_send_mapc(col, true); + + lpi_stats_expect(2, 8196); + its_send_int(dev7, 255); + check_lpi_stats(); + + config = gicv3_lpi_get_config(8192); + report(config == LPI_PROP_DEFAULT, + "Config of LPI 8192 was properly migrated"); + + lpi_stats_expect(nr_cpus - 1, 8192); + its_send_int(dev2, 0); + check_lpi_stats(); + + /* unmap the collection */ + its_send_mapc(col, false); + + lpi_stats_expect(-1, -1); + its_send_int(dev2, 0); + check_lpi_stats(); + + /* remap event 0 onto lpiid 8193 */ + set_lpi(dev2, 0, 8193, col); + lpi_stats_expect(-1, -1); + its_send_int(dev2, 0); + check_lpi_stats(); + + /* remap the collection */ + its_send_mapc(col, true); + lpi_stats_expect(nr_cpus - 1, 8193); +} + +static void test_its_pending_migration(void) +{ + struct its_device *dev; + struct its_collection *collection[2]; + int expected[NR_CPUS]; + u64 pendbaser; + void *ptr; + int i; + + if (its_prerequisites(4)) + return; + + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); + its_send_mapd(dev, true); + + collection[0] = its_create_collection(nr_cpus - 1, nr_cpus - 1); + collection[1] = its_create_collection(nr_cpus - 2, nr_cpus - 2); + its_send_mapc(collection[0], true); + its_send_mapc(collection[1], true); + + /* disable lpi at redist level */ + gicv3_lpi_rdist_ctrl(nr_cpus - 1, false); + gicv3_lpi_rdist_ctrl(nr_cpus - 2, false); + + /* even lpis are assigned to even cpu */ + for (i = 0; i < 256; i++) { + struct its_collection *col = i % 2 ? collection[0] : + collection[1]; + int vcpu = col->target_address >> 16; + + its_send_mapti(dev, 8192 + i, i, col); + gicv3_lpi_set_config(8192 + i, LPI_PROP_DEFAULT); + gicv3_lpi_set_pending_table_bit(vcpu, 8192 + i, true); + } + its_send_invall(collection[0]); + its_send_invall(collection[1]); + + /* Set the PTZ bit on each pendbaser */ + + expected[nr_cpus - 1] = 128; + expected[nr_cpus - 2] = 128; + + ptr = gicv3_data.redist_base[nr_cpus - 1] + GICR_PENDBASER; + pendbaser = readq(ptr); + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); + + ptr = gicv3_data.redist_base[nr_cpus - 2] + GICR_PENDBASER; + pendbaser = readq(ptr); + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); + + gicv3_lpi_rdist_ctrl(nr_cpus - 1, true); + gicv3_lpi_rdist_ctrl(nr_cpus - 2, true); + + puts("Now migrate the VM, then press a key to continue...\n"); + (void)getchar(); + report(true, "Migration complete"); + + mdelay(1000); + + check_lpi_hits(expected); +} #endif int main(int argc, char **argv) @@ -847,6 +989,14 @@ int main(int argc, char **argv) report_prefix_push(argv[1]); test_its_migration(); report_prefix_pop(); + } else if (!strcmp(argv[1], "its-pending-migration")) { + report_prefix_push(argv[1]); + test_its_pending_migration(); + report_prefix_pop(); + } else if (!strcmp(argv[1], "its-migrate-unmapped-collection")) { + report_prefix_push(argv[1]); + test_migrate_unmapped_collection(); + report_prefix_pop(); } else if (strcmp(argv[1], "its-introspection") == 0) { report_prefix_push(argv[1]); test_its_introspection(); diff --git a/arm/unittests.cfg b/arm/unittests.cfg index 8b8ec79..d917157 100644 --- a/arm/unittests.cfg +++ b/arm/unittests.cfg @@ -144,6 +144,22 @@ extra_params = -machine gic-version=3 -append 'its-migration' groups = its migration arch = arm64 +[its-pending-migration] +file = gic.flat +smp = $MAX_SMP +accel = kvm +extra_params = -machine gic-version=3 -append 'its-pending-migration' +groups = its migration +arch = arm64 + +[its-migrate-unmapped-collection] +file = gic.flat +smp = $MAX_SMP +accel = kvm +extra_params = -machine gic-version=3 -append 'its-migrate-unmapped-collection' +groups = its migration +arch = arm64 + # Test PSCI emulation [psci] file = psci.flat
Add two new migration tests. One testing the migration of a topology where collection were unmapped. The second test checks the migration of the pending table. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- v2 -> v3: - tests belong to both its and migration groups --- arm/gic.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++ arm/unittests.cfg | 16 +++++ 2 files changed, 166 insertions(+)