diff mbox series

[v2,6/6] arm64: dts: meson: add libretech-pc support

Message ID 20200227112738.494579-7-jbrunet@baylibre.com
State Accepted, archived
Delegated to: Neil Armstrong
Headers show
Series arm64: meson: add libretech-pc support | expand

Commit Message

Jerome Brunet Feb. 27, 2020, 11:27 a.m. UTC 
Add support for the Amlogic based libretech-pc platform.
This platform comes with 2 variant, based on the s905d or s912 SoC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm/dts/Makefile                         |  2 +
 .../meson-gxl-s905d-libretech-pc-u-boot.dtsi  |  7 ++
 .../meson-gxm-s912-libretech-pc-u-boot.dtsi   |  7 ++
 configs/libretech-s905d-pc_defconfig          | 71 +++++++++++++++++++
 configs/libretech-s912-pc_defconfig           | 71 +++++++++++++++++++
 include/configs/libretech-pc.h                | 17 +++++
 6 files changed, 175 insertions(+)
 create mode 100644 arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
 create mode 100644 arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
 create mode 100644 configs/libretech-s905d-pc_defconfig
 create mode 100644 configs/libretech-s912-pc_defconfig
 create mode 100644 include/configs/libretech-pc.h

Comments

Neil Armstrong March 2, 2020, 9:34 a.m. UTC | #1 
On 27/02/2020 12:27, Jerome Brunet wrote:
> Add support for the Amlogic based libretech-pc platform.
> This platform comes with 2 variant, based on the s905d or s912 SoC.
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  arch/arm/dts/Makefile                         |  2 +
>  .../meson-gxl-s905d-libretech-pc-u-boot.dtsi  |  7 ++
>  .../meson-gxm-s912-libretech-pc-u-boot.dtsi   |  7 ++
>  configs/libretech-s905d-pc_defconfig          | 71 +++++++++++++++++++
>  configs/libretech-s912-pc_defconfig           | 71 +++++++++++++++++++
>  include/configs/libretech-pc.h                | 17 +++++
>  6 files changed, 175 insertions(+)
>  create mode 100644 arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
>  create mode 100644 arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
>  create mode 100644 configs/libretech-s905d-pc_defconfig
>  create mode 100644 configs/libretech-s912-pc_defconfig
>  create mode 100644 include/configs/libretech-pc.h
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 3b8dc2f56fd2..45120d8f20ce 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -137,7 +137,9 @@ dtb-$(CONFIG_ARCH_MESON) += \
>  	meson-gxl-s805x-libretech-ac.dtb \
>  	meson-gxl-s905x-libretech-cc.dtb \
>  	meson-gxl-s905x-khadas-vim.dtb \
> +	meson-gxl-s905d-libretech-pc.dtb \
>  	meson-gxm-khadas-vim2.dtb \
> +	meson-gxm-s912-libretech-pc.dtb \
>  	meson-axg-s400.dtb \
>  	meson-g12a-u200.dtb \
>  	meson-g12a-sei510.dtb \
> diff --git a/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi b/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
> new file mode 100644
> index 000000000000..c35158d7e9ee
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#include "meson-gx-u-boot.dtsi"
> diff --git a/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi b/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
> new file mode 100644
> index 000000000000..c35158d7e9ee
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#include "meson-gx-u-boot.dtsi"
> diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig
> new file mode 100644
> index 000000000000..0dbacf60046a
> --- /dev/null
> +++ b/configs/libretech-s905d-pc_defconfig
> @@ -0,0 +1,71 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_CONFIG_NAME="libretech-pc"
> +CONFIG_SYS_BOARD="q200"
> +CONFIG_ARCH_MESON=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_MESON_GXL=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" libretech-s905d-pc"
> +CONFIG_DEBUG_UART=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="usb start"
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SF_TEST=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905d-libretech-pc"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SARADC_MESON=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_KEYBOARD=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_PHY=y
> +CONFIG_MESON_GXL_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXL=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_MESON=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_MESON_SPIFC=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_SYS_WHITE_ON_BLACK=y
> +CONFIG_VIDEO_MESON=y
> +CONFIG_VIDEO_DT_SIMPLEFB=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig
> new file mode 100644
> index 000000000000..63b44b389be6
> --- /dev/null
> +++ b/configs/libretech-s912-pc_defconfig
> @@ -0,0 +1,71 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_CONFIG_NAME="libretech-pc"
> +CONFIG_SYS_BOARD="q200"
> +CONFIG_ARCH_MESON=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_MESON_GXM=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" libretech-s912-pc"
> +CONFIG_DEBUG_UART=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="usb start"
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SF_TEST=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-s912-libretech-pc"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SARADC_MESON=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_KEYBOARD=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_PHY=y
> +CONFIG_MESON_GXL_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXL=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_MESON=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_MESON_SPIFC=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_SYS_WHITE_ON_BLACK=y
> +CONFIG_VIDEO_MESON=y
> +CONFIG_VIDEO_DT_SIMPLEFB=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> diff --git a/include/configs/libretech-pc.h b/include/configs/libretech-pc.h
> new file mode 100644
> index 000000000000..182eba519d51
> --- /dev/null
> +++ b/include/configs/libretech-pc.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Configuration for LibreTech AC
> + *
> + * Copyright (C) 2020 Baylibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_ENV_SECT_SIZE	0x10000
> +#define CONFIG_ENV_OFFSET	(-0x10000)
> +
> +#include <configs/meson64.h>
> +
> +#endif /* __CONFIG_H */
> 

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong March 2, 2020, 9:52 a.m. UTC | #2 
On 02/03/2020 10:34, Neil Armstrong wrote:
> On 27/02/2020 12:27, Jerome Brunet wrote:
>> Add support for the Amlogic based libretech-pc platform.
>> This platform comes with 2 variant, based on the s905d or s912 SoC.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>>  arch/arm/dts/Makefile                         |  2 +
>>  .../meson-gxl-s905d-libretech-pc-u-boot.dtsi  |  7 ++
>>  .../meson-gxm-s912-libretech-pc-u-boot.dtsi   |  7 ++
>>  configs/libretech-s905d-pc_defconfig          | 71 +++++++++++++++++++
>>  configs/libretech-s912-pc_defconfig           | 71 +++++++++++++++++++
>>  include/configs/libretech-pc.h                | 17 +++++
>>  6 files changed, 175 insertions(+)
>>  create mode 100644 arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
>>  create mode 100644 arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
>>  create mode 100644 configs/libretech-s905d-pc_defconfig
>>  create mode 100644 configs/libretech-s912-pc_defconfig
>>  create mode 100644 include/configs/libretech-pc.h
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 3b8dc2f56fd2..45120d8f20ce 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -137,7 +137,9 @@ dtb-$(CONFIG_ARCH_MESON) += \
>>  	meson-gxl-s805x-libretech-ac.dtb \
>>  	meson-gxl-s905x-libretech-cc.dtb \
>>  	meson-gxl-s905x-khadas-vim.dtb \
>> +	meson-gxl-s905d-libretech-pc.dtb \
>>  	meson-gxm-khadas-vim2.dtb \
>> +	meson-gxm-s912-libretech-pc.dtb \
>>  	meson-axg-s400.dtb \
>>  	meson-g12a-u200.dtb \
>>  	meson-g12a-sei510.dtb \
>> diff --git a/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi b/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
>> new file mode 100644
>> index 000000000000..c35158d7e9ee
>> --- /dev/null
>> +++ b/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
>> @@ -0,0 +1,7 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 BayLibre, SAS.
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + */
>> +
>> +#include "meson-gx-u-boot.dtsi"
>> diff --git a/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi b/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
>> new file mode 100644
>> index 000000000000..c35158d7e9ee
>> --- /dev/null
>> +++ b/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
>> @@ -0,0 +1,7 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 BayLibre, SAS.
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + */
>> +
>> +#include "meson-gx-u-boot.dtsi"
>> diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig
>> new file mode 100644
>> index 000000000000..0dbacf60046a
>> --- /dev/null
>> +++ b/configs/libretech-s905d-pc_defconfig
>> @@ -0,0 +1,71 @@
>> +CONFIG_ARM=y
>> +CONFIG_SYS_CONFIG_NAME="libretech-pc"
>> +CONFIG_SYS_BOARD="q200"
>> +CONFIG_ARCH_MESON=y
>> +CONFIG_SYS_TEXT_BASE=0x01000000
>> +CONFIG_MESON_GXL=y
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_DEBUG_UART_BASE=0xc81004c0
>> +CONFIG_DEBUG_UART_CLOCK=24000000
>> +CONFIG_IDENT_STRING=" libretech-s905d-pc"
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_OF_BOARD_SETUP=y
>> +CONFIG_USE_PREBOOT=y
>> +CONFIG_PREBOOT="usb start"
>> +CONFIG_MISC_INIT_R=y
>> +# CONFIG_DISPLAY_CPUINFO is not set
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_IMI is not set
>> +CONFIG_CMD_ADC=y
>> +CONFIG_CMD_GPIO=y
>> +# CONFIG_CMD_LOADS is not set
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_SF_TEST=y
>> +CONFIG_CMD_SPI=y
>> +CONFIG_CMD_USB=y
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_CMD_REGULATOR=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905d-libretech-pc"
>> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>> +CONFIG_NET_RANDOM_ETHADDR=y
>> +CONFIG_SARADC_MESON=y
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DM_KEYBOARD=y
>> +CONFIG_DM_MMC=y
>> +CONFIG_MMC_MESON_GX=y
>> +CONFIG_MTD=y
>> +CONFIG_DM_SPI_FLASH=y
>> +CONFIG_SPI_FLASH=y
>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>> +CONFIG_PHY_REALTEK=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_ETH_DESIGNWARE=y
>> +CONFIG_PHY=y
>> +CONFIG_MESON_GXL_USB_PHY=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_PINCTRL_MESON_GXL=y
>> +CONFIG_POWER_DOMAIN=y
>> +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
>> +CONFIG_DM_REGULATOR_FIXED=y
>> +CONFIG_DM_RESET=y
>> +CONFIG_DEBUG_UART_MESON=y
>> +CONFIG_DEBUG_UART_ANNOUNCE=y
>> +CONFIG_DEBUG_UART_SKIP_INIT=y
>> +CONFIG_MESON_SERIAL=y
>> +CONFIG_SPI=y
>> +CONFIG_DM_SPI=y
>> +CONFIG_MESON_SPIFC=y
>> +CONFIG_USB=y
>> +CONFIG_DM_USB=y
>> +CONFIG_USB_XHCI_HCD=y
>> +CONFIG_USB_XHCI_DWC3=y
>> +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
>> +CONFIG_USB_DWC3=y
>> +CONFIG_USB_KEYBOARD=y
>> +CONFIG_DM_VIDEO=y
>> +CONFIG_SYS_WHITE_ON_BLACK=y
>> +CONFIG_VIDEO_MESON=y
>> +CONFIG_VIDEO_DT_SIMPLEFB=y
>> +CONFIG_OF_LIBFDT_OVERLAY=y
>> diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig
>> new file mode 100644
>> index 000000000000..63b44b389be6
>> --- /dev/null
>> +++ b/configs/libretech-s912-pc_defconfig
>> @@ -0,0 +1,71 @@
>> +CONFIG_ARM=y
>> +CONFIG_SYS_CONFIG_NAME="libretech-pc"
>> +CONFIG_SYS_BOARD="q200"
>> +CONFIG_ARCH_MESON=y
>> +CONFIG_SYS_TEXT_BASE=0x01000000
>> +CONFIG_MESON_GXM=y
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_DEBUG_UART_BASE=0xc81004c0
>> +CONFIG_DEBUG_UART_CLOCK=24000000
>> +CONFIG_IDENT_STRING=" libretech-s912-pc"
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_OF_BOARD_SETUP=y
>> +CONFIG_USE_PREBOOT=y
>> +CONFIG_PREBOOT="usb start"
>> +CONFIG_MISC_INIT_R=y
>> +# CONFIG_DISPLAY_CPUINFO is not set
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_IMI is not set
>> +CONFIG_CMD_ADC=y
>> +CONFIG_CMD_GPIO=y
>> +# CONFIG_CMD_LOADS is not set
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_SF_TEST=y
>> +CONFIG_CMD_SPI=y
>> +CONFIG_CMD_USB=y
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_CMD_REGULATOR=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-s912-libretech-pc"
>> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>> +CONFIG_NET_RANDOM_ETHADDR=y
>> +CONFIG_SARADC_MESON=y
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DM_KEYBOARD=y
>> +CONFIG_DM_MMC=y
>> +CONFIG_MMC_MESON_GX=y
>> +CONFIG_MTD=y
>> +CONFIG_DM_SPI_FLASH=y
>> +CONFIG_SPI_FLASH=y
>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>> +CONFIG_PHY_REALTEK=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_ETH_DESIGNWARE=y
>> +CONFIG_PHY=y
>> +CONFIG_MESON_GXL_USB_PHY=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_PINCTRL_MESON_GXL=y
>> +CONFIG_POWER_DOMAIN=y
>> +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
>> +CONFIG_DM_REGULATOR_FIXED=y
>> +CONFIG_DM_RESET=y
>> +CONFIG_DEBUG_UART_MESON=y
>> +CONFIG_DEBUG_UART_ANNOUNCE=y
>> +CONFIG_DEBUG_UART_SKIP_INIT=y
>> +CONFIG_MESON_SERIAL=y
>> +CONFIG_SPI=y
>> +CONFIG_DM_SPI=y
>> +CONFIG_MESON_SPIFC=y
>> +CONFIG_USB=y
>> +CONFIG_DM_USB=y
>> +CONFIG_USB_XHCI_HCD=y
>> +CONFIG_USB_XHCI_DWC3=y
>> +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
>> +CONFIG_USB_DWC3=y
>> +CONFIG_USB_KEYBOARD=y
>> +CONFIG_DM_VIDEO=y
>> +CONFIG_SYS_WHITE_ON_BLACK=y
>> +CONFIG_VIDEO_MESON=y
>> +CONFIG_VIDEO_DT_SIMPLEFB=y
>> +CONFIG_OF_LIBFDT_OVERLAY=y
>> diff --git a/include/configs/libretech-pc.h b/include/configs/libretech-pc.h
>> new file mode 100644
>> index 000000000000..182eba519d51
>> --- /dev/null
>> +++ b/include/configs/libretech-pc.h
>> @@ -0,0 +1,17 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * Configuration for LibreTech AC
>> + *
>> + * Copyright (C) 2020 Baylibre, SAS
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + */
>> +
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +#define CONFIG_ENV_SECT_SIZE	0x10000
>> +#define CONFIG_ENV_OFFSET	(-0x10000)
>> +
>> +#include <configs/meson64.h>
>> +
>> +#endif /* __CONFIG_H */
>>
> 
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> 

The defconfig fails with :
scripts/kconfig/conf  --syncconfig Kconfig
.config:164:warning: symbol value '' invalid for ENV_SECT_SIZE
.config:165:warning: symbol value '' invalid for ENV_OFFSET

for both configs on master.

Neil
Jerome Brunet March 2, 2020, 9:57 a.m. UTC | #3 
On Mon 02 Mar 2020 at 10:52, Neil Armstrong <narmstrong@baylibre.com> wrote:

> On 02/03/2020 10:34, Neil Armstrong wrote:
>> On 27/02/2020 12:27, Jerome Brunet wrote:
>
> The defconfig fails with :
> scripts/kconfig/conf  --syncconfig Kconfig
> .config:164:warning: symbol value '' invalid for ENV_SECT_SIZE
> .config:165:warning: symbol value '' invalid for ENV_OFFSET
>
> for both configs on master.

That's quite a few comment about master which propably means I messed up
while rebasing on it (or trying to).

I can fix this up a resubmit the whole thing if you want.

>
> Neil
Neil Armstrong March 2, 2020, 10:09 a.m. UTC | #4 
Hi,

On 02/03/2020 10:57, Jerome Brunet wrote:
> 
> On Mon 02 Mar 2020 at 10:52, Neil Armstrong <narmstrong@baylibre.com> wrote:
> 
>> On 02/03/2020 10:34, Neil Armstrong wrote:
>>> On 27/02/2020 12:27, Jerome Brunet wrote:
>>
>> The defconfig fails with :
>> scripts/kconfig/conf  --syncconfig Kconfig
>> .config:164:warning: symbol value '' invalid for ENV_SECT_SIZE
>> .config:165:warning: symbol value '' invalid for ENV_OFFSET
>>
>> for both configs on master.
> 
> That's quite a few comment about master which propably means I messed up
> while rebasing on it (or trying to).
> 
> I can fix this up a resubmit the whole thing if you want.

Yes please

Thanks,
Neil

> 
>>
>> Neil
>
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3b8dc2f56fd2..45120d8f20ce 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -137,7 +137,9 @@  dtb-$(CONFIG_ARCH_MESON) += \
 	meson-gxl-s805x-libretech-ac.dtb \
 	meson-gxl-s905x-libretech-cc.dtb \
 	meson-gxl-s905x-khadas-vim.dtb \
+	meson-gxl-s905d-libretech-pc.dtb \
 	meson-gxm-khadas-vim2.dtb \
+	meson-gxm-s912-libretech-pc.dtb \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
diff --git a/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi b/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
new file mode 100644
index 000000000000..c35158d7e9ee
--- /dev/null
+++ b/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
@@ -0,0 +1,7 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
diff --git a/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi b/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
new file mode 100644
index 000000000000..c35158d7e9ee
--- /dev/null
+++ b/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
@@ -0,0 +1,7 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig
new file mode 100644
index 000000000000..0dbacf60046a
--- /dev/null
+++ b/configs/libretech-s905d-pc_defconfig
@@ -0,0 +1,71 @@ 
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="libretech-pc"
+CONFIG_SYS_BOARD="q200"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_MESON_GXL=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xc81004c0
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" libretech-s905d-pc"
+CONFIG_DEBUG_UART=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="usb start"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_ADC=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905d-libretech-pc"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SARADC_MESON=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_GXL=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MESON_SPIFC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_MESON=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig
new file mode 100644
index 000000000000..63b44b389be6
--- /dev/null
+++ b/configs/libretech-s912-pc_defconfig
@@ -0,0 +1,71 @@ 
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="libretech-pc"
+CONFIG_SYS_BOARD="q200"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_MESON_GXM=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xc81004c0
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" libretech-s912-pc"
+CONFIG_DEBUG_UART=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="usb start"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_ADC=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-s912-libretech-pc"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SARADC_MESON=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_GXL=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MESON_SPIFC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_MESON=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/include/configs/libretech-pc.h b/include/configs/libretech-pc.h
new file mode 100644
index 000000000000..182eba519d51
--- /dev/null
+++ b/include/configs/libretech-pc.h
@@ -0,0 +1,17 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for LibreTech AC
+ *
+ * Copyright (C) 2020 Baylibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_OFFSET	(-0x10000)
+
+#include <configs/meson64.h>
+
+#endif /* __CONFIG_H */