diff mbox series

[V3,2/7] dt-bindings: gpio: Add binding for Versal gpio

Message ID 1581942793-19468-3-git-send-email-srinivas.neeli@xilinx.com
State New
Headers show
Series [V3,1/7] gpio: zynq: protect direction in/out with a spinlock | expand

Commit Message

Srinivas Neeli Feb. 17, 2020, 12:33 p.m. UTC 
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>

Add binding for Versal binding.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 Documentation/devicetree/bindings/gpio/gpio-zynq.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Bartosz Golaszewski Feb. 20, 2020, 10:25 a.m. UTC | #1 
pon., 17 lut 2020 o 13:33 Srinivas Neeli <srinivas.neeli@xilinx.com> napisał(a):
>
> From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
>
> Add binding for Versal binding.

Please add a short note on Versal here as well - don't worry about
duplicating commit messages: when I git blame the line and go to see
the commit that introduced it, I want to get the whole picture.

Bart
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
index 4fa4eb5507cd..4806d846c0fc 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
@@ -6,7 +6,8 @@  Required properties:
 			  - First cell is the GPIO line number
 			  - Second cell is used to specify optional
 			    parameters (unused)
-- compatible		: Should be "xlnx,zynq-gpio-1.0" or "xlnx,zynqmp-gpio-1.0"
+- compatible		: Should be "xlnx,zynq-gpio-1.0" or
+			  "xlnx,zynqmp-gpio-1.0" or "xlnx,versal-gpio-1.0
 - clocks		: Clock specifier (see clock bindings for details)
 - gpio-controller	: Marks the device node as a GPIO controller.
 - interrupts		: Interrupt specifier (see interrupt bindings for