| Message ID | 20200210120723.91794-8-bryan.odonoghue@linaro.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Mon, 10 Feb 2020 12:07:12 +0000, Bryan O'Donoghue wrote: > A USB connector should be a child node of the USB controller > connector/usb-connector.txt. This patch adds an example of how to do this > to the dwc3 binding descriptions. > > It is necessary to declare a connector as a child-node of a USB controller > for role-switching to work, so this example should be helpful to others > implementing that. > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: linux-usb@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Acked-by: Felipe Balbi <balbi@kernel.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 66780a47ad85..4e1e4afccee6 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -121,4 +121,12 @@ dwc3@4a030000 { interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + + usb_con: connector { + compatible = "gpio-usb-b-connector"; + id-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb3_vbus_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_id_pin>, <&usb3_vbus_pin>; + }; };