@@ -71,6 +71,29 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v_sata>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -234,7 +257,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo5 {
+ vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -317,5 +340,16 @@
gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
+
+ vdd_5v_sata: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
@@ -37,6 +37,69 @@
status = "okay";
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-3 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-3 {
+ nvidia,usb2-companion = <3>;
+ maximum-speed = "super-speed";
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ };
+
pwm@c340000 {
status = "okay";
};
This commit enables XUSB host and pad controller in Tegra194 P2972-0000 board. Signed-off-by: JC Kuo <jckuo@nvidia.com> --- Changes in v6: - re-use "maximum-speed" instead of adding "nvidia,disable-gen2" Changes in v5: none Changes in v4: none Changes in v3: none Changes in v2: - use capitalization of regulator names - fix gpio property of VDD_5V_SATA regulator .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++++++++- .../boot/dts/nvidia/tegra194-p2972-0000.dts | 63 +++++++++++++++++++ 2 files changed, 98 insertions(+), 1 deletion(-)