diff mbox series

[2/6] PCI: Make pci_bus_speed_strings[] public

Message ID 1579079063-5668-3-git-send-email-yangyicong@hisilicon.com
State New
Headers show
Series Improve link speed presentation process | expand

Commit Message

Yicong Yang Jan. 15, 2020, 9:04 a.m. UTC 
pci_bus_speed_strings[] in slot.c defines universal speed information.
Make it public and move to probe.c so that we can use it. Remove "PCIe"
suffix of PCIe bus speed strings to reduce redundancy.

Use PCI_SPEED_UNKNOWN to judge the unknown speed condition in
bus_speed_read() in slot.c, as we cannot get array size from an external
array.

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
---

The reason why I don't add a boundary check is illustrated in Patch_4

 drivers/pci/pci.h   |  1 +
 drivers/pci/probe.c | 29 +++++++++++++++++++++++++++++
 drivers/pci/slot.c  | 35 +++--------------------------------
 3 files changed, 33 insertions(+), 32 deletions(-)

--
2.8.1

Comments

Bjorn Helgaas Feb. 5, 2020, 6:35 p.m. UTC | #1 
On Wed, Jan 15, 2020 at 05:04:19PM +0800, Yicong Yang wrote:
> pci_bus_speed_strings[] in slot.c defines universal speed information.
> Make it public and move to probe.c so that we can use it. Remove "PCIe"
> suffix of PCIe bus speed strings to reduce redundancy.

This needs to say exactly where this change will be observed: /proc
file, /sys file, dmesg, etc.  I would prefer that an observable change
be in its own patch instead of being a by-product of a structural
change like this one.

> Use PCI_SPEED_UNKNOWN to judge the unknown speed condition in
> bus_speed_read() in slot.c, as we cannot get array size from an external
> array.
> 
> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> ---
> 
> The reason why I don't add a boundary check is illustrated in Patch_4
> 
>  drivers/pci/pci.h   |  1 +
>  drivers/pci/probe.c | 29 +++++++++++++++++++++++++++++
>  drivers/pci/slot.c  | 35 +++--------------------------------
>  3 files changed, 33 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index a88c316..5fb1d76 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -9,6 +9,7 @@
>  #define PCI_VSEC_ID_INTEL_TBT	0x1234	/* Thunderbolt */
> 
>  extern const unsigned char pcie_link_speed[];
> +extern const char *pci_bus_speed_strings[];
>  extern bool pci_early_dump;
> 
>  bool pcie_cap_has_lnkctl(const struct pci_dev *dev);
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 512cb43..3c70b87 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -678,6 +678,35 @@ const unsigned char pcie_link_speed[] = {
>  	PCI_SPEED_UNKNOWN		/* F */
>  };
> 
> +/* these strings match up with the values in pci_bus_speed */
> +const char *pci_bus_speed_strings[] = {
> +	"33 MHz PCI",		/* 0x00 */
> +	"66 MHz PCI",		/* 0x01 */
> +	"66 MHz PCI-X",		/* 0x02 */
> +	"100 MHz PCI-X",	/* 0x03 */
> +	"133 MHz PCI-X",	/* 0x04 */
> +	NULL,			/* 0x05 */
> +	NULL,			/* 0x06 */
> +	NULL,			/* 0x07 */
> +	NULL,			/* 0x08 */
> +	"66 MHz PCI-X 266",	/* 0x09 */
> +	"100 MHz PCI-X 266",	/* 0x0a */
> +	"133 MHz PCI-X 266",	/* 0x0b */
> +	"Unknown AGP",		/* 0x0c */
> +	"1x AGP",		/* 0x0d */
> +	"2x AGP",		/* 0x0e */
> +	"4x AGP",		/* 0x0f */
> +	"8x AGP",		/* 0x10 */
> +	"66 MHz PCI-X 533",	/* 0x11 */
> +	"100 MHz PCI-X 533",	/* 0x12 */
> +	"133 MHz PCI-X 533",	/* 0x13 */
> +	"2.5 GT/s",	/* 0x14 */
> +	"5.0 GT/s",	/* 0x15 */
> +	"8.0 GT/s",	/* 0x16 */
> +	"16.0 GT/s",	/* 0x17 */
> +	"32.0 GT/s",	/* 0x18 */
> +};
> +
>  void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
>  {
>  	bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS];
> diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
> index ae4aa0e..140dafb 100644
> --- a/drivers/pci/slot.c
> +++ b/drivers/pci/slot.c
> @@ -49,43 +49,14 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf)
>  				slot->number);
>  }
> 
> -/* these strings match up with the values in pci_bus_speed */
> -static const char *pci_bus_speed_strings[] = {
> -	"33 MHz PCI",		/* 0x00 */
> -	"66 MHz PCI",		/* 0x01 */
> -	"66 MHz PCI-X",		/* 0x02 */
> -	"100 MHz PCI-X",	/* 0x03 */
> -	"133 MHz PCI-X",	/* 0x04 */
> -	NULL,			/* 0x05 */
> -	NULL,			/* 0x06 */
> -	NULL,			/* 0x07 */
> -	NULL,			/* 0x08 */
> -	"66 MHz PCI-X 266",	/* 0x09 */
> -	"100 MHz PCI-X 266",	/* 0x0a */
> -	"133 MHz PCI-X 266",	/* 0x0b */
> -	"Unknown AGP",		/* 0x0c */
> -	"1x AGP",		/* 0x0d */
> -	"2x AGP",		/* 0x0e */
> -	"4x AGP",		/* 0x0f */
> -	"8x AGP",		/* 0x10 */
> -	"66 MHz PCI-X 533",	/* 0x11 */
> -	"100 MHz PCI-X 533",	/* 0x12 */
> -	"133 MHz PCI-X 533",	/* 0x13 */
> -	"2.5 GT/s PCIe",	/* 0x14 */
> -	"5.0 GT/s PCIe",	/* 0x15 */
> -	"8.0 GT/s PCIe",	/* 0x16 */
> -	"16.0 GT/s PCIe",	/* 0x17 */
> -	"32.0 GT/s PCIe",	/* 0x18 */
> -};
> -
>  static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
>  {
>  	const char *speed_string;
> 
> -	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
> -		speed_string = pci_bus_speed_strings[speed];
> -	else
> +	if (speed == PCI_SPEED_UNKNOWN)
>  		speed_string = "Unknown";
> +	else
> +		speed_string = pci_bus_speed_strings[speed];

This is a little bit problematic because previously we checked the
actual array index but here we don't, so we may not index past the end
of the array.

It's possible to specify the array size explicitly in the extern
declaration, and I *think* that might mean ARRAY_SIZE() would still
work.  It's not ideal to have to update the extern declaration when
adding speeds, but at least it's something that would be noticed by
even the most trivial testing.

>  	return sprintf(buf, "%s\n", speed_string);
>  }
> --
> 2.8.1
>
Yicong Yang Feb. 6, 2020, 1:47 a.m. UTC | #2 
On 2020/2/6 2:35, Bjorn Helgaas wrote:
> On Wed, Jan 15, 2020 at 05:04:19PM +0800, Yicong Yang wrote:
>> pci_bus_speed_strings[] in slot.c defines universal speed information.
>> Make it public and move to probe.c so that we can use it. Remove "PCIe"
>> suffix of PCIe bus speed strings to reduce redundancy.
> This needs to say exactly where this change will be observed: /proc
> file, /sys file, dmesg, etc.  I would prefer that an observable change
> be in its own patch instead of being a by-product of a structural
> change like this one.

I'll split this patch from this series and send it individually before the series.
And make detailed description in the next version.


>> Use PCI_SPEED_UNKNOWN to judge the unknown speed condition in
>> bus_speed_read() in slot.c, as we cannot get array size from an external
>> array.
>>
>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
>> ---
>>
>> The reason why I don't add a boundary check is illustrated in Patch_4
>>
>>  drivers/pci/pci.h   |  1 +
>>  drivers/pci/probe.c | 29 +++++++++++++++++++++++++++++
>>  drivers/pci/slot.c  | 35 +++--------------------------------
>>  3 files changed, 33 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>> index a88c316..5fb1d76 100644
>> --- a/drivers/pci/pci.h
>> +++ b/drivers/pci/pci.h
>> @@ -9,6 +9,7 @@
>>  #define PCI_VSEC_ID_INTEL_TBT	0x1234	/* Thunderbolt */
>>
>>  extern const unsigned char pcie_link_speed[];
>> +extern const char *pci_bus_speed_strings[];
>>  extern bool pci_early_dump;
>>
>>  bool pcie_cap_has_lnkctl(const struct pci_dev *dev);
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 512cb43..3c70b87 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -678,6 +678,35 @@ const unsigned char pcie_link_speed[] = {
>>  	PCI_SPEED_UNKNOWN		/* F */
>>  };
>>
>> +/* these strings match up with the values in pci_bus_speed */
>> +const char *pci_bus_speed_strings[] = {
>> +	"33 MHz PCI",		/* 0x00 */
>> +	"66 MHz PCI",		/* 0x01 */
>> +	"66 MHz PCI-X",		/* 0x02 */
>> +	"100 MHz PCI-X",	/* 0x03 */
>> +	"133 MHz PCI-X",	/* 0x04 */
>> +	NULL,			/* 0x05 */
>> +	NULL,			/* 0x06 */
>> +	NULL,			/* 0x07 */
>> +	NULL,			/* 0x08 */
>> +	"66 MHz PCI-X 266",	/* 0x09 */
>> +	"100 MHz PCI-X 266",	/* 0x0a */
>> +	"133 MHz PCI-X 266",	/* 0x0b */
>> +	"Unknown AGP",		/* 0x0c */
>> +	"1x AGP",		/* 0x0d */
>> +	"2x AGP",		/* 0x0e */
>> +	"4x AGP",		/* 0x0f */
>> +	"8x AGP",		/* 0x10 */
>> +	"66 MHz PCI-X 533",	/* 0x11 */
>> +	"100 MHz PCI-X 533",	/* 0x12 */
>> +	"133 MHz PCI-X 533",	/* 0x13 */
>> +	"2.5 GT/s",	/* 0x14 */
>> +	"5.0 GT/s",	/* 0x15 */
>> +	"8.0 GT/s",	/* 0x16 */
>> +	"16.0 GT/s",	/* 0x17 */
>> +	"32.0 GT/s",	/* 0x18 */
>> +};
>> +
>>  void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
>>  {
>>  	bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS];
>> diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
>> index ae4aa0e..140dafb 100644
>> --- a/drivers/pci/slot.c
>> +++ b/drivers/pci/slot.c
>> @@ -49,43 +49,14 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf)
>>  				slot->number);
>>  }
>>
>> -/* these strings match up with the values in pci_bus_speed */
>> -static const char *pci_bus_speed_strings[] = {
>> -	"33 MHz PCI",		/* 0x00 */
>> -	"66 MHz PCI",		/* 0x01 */
>> -	"66 MHz PCI-X",		/* 0x02 */
>> -	"100 MHz PCI-X",	/* 0x03 */
>> -	"133 MHz PCI-X",	/* 0x04 */
>> -	NULL,			/* 0x05 */
>> -	NULL,			/* 0x06 */
>> -	NULL,			/* 0x07 */
>> -	NULL,			/* 0x08 */
>> -	"66 MHz PCI-X 266",	/* 0x09 */
>> -	"100 MHz PCI-X 266",	/* 0x0a */
>> -	"133 MHz PCI-X 266",	/* 0x0b */
>> -	"Unknown AGP",		/* 0x0c */
>> -	"1x AGP",		/* 0x0d */
>> -	"2x AGP",		/* 0x0e */
>> -	"4x AGP",		/* 0x0f */
>> -	"8x AGP",		/* 0x10 */
>> -	"66 MHz PCI-X 533",	/* 0x11 */
>> -	"100 MHz PCI-X 533",	/* 0x12 */
>> -	"133 MHz PCI-X 533",	/* 0x13 */
>> -	"2.5 GT/s PCIe",	/* 0x14 */
>> -	"5.0 GT/s PCIe",	/* 0x15 */
>> -	"8.0 GT/s PCIe",	/* 0x16 */
>> -	"16.0 GT/s PCIe",	/* 0x17 */
>> -	"32.0 GT/s PCIe",	/* 0x18 */
>> -};
>> -
>>  static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
>>  {
>>  	const char *speed_string;
>>
>> -	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
>> -		speed_string = pci_bus_speed_strings[speed];
>> -	else
>> +	if (speed == PCI_SPEED_UNKNOWN)
>>  		speed_string = "Unknown";
>> +	else
>> +		speed_string = pci_bus_speed_strings[speed];
> This is a little bit problematic because previously we checked the
> actual array index but here we don't, so we may not index past the end
> of the array.
>
> It's possible to specify the array size explicitly in the extern
> declaration, and I *think* that might mean ARRAY_SIZE() would still
> work.  It's not ideal to have to update the extern declaration when
> adding speeds, but at least it's something that would be noticed by
> even the most trivial testing.

Maybe it's possible to add an array size valuable near the bus speed
string array and make it external. Then we can reference it here.

Thanks,
Yang

>>  	return sprintf(buf, "%s\n", speed_string);
>>  }
>> --
>> 2.8.1
>>
> .
>
diff mbox series

Patch

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a88c316..5fb1d76 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -9,6 +9,7 @@ 
 #define PCI_VSEC_ID_INTEL_TBT	0x1234	/* Thunderbolt */

 extern const unsigned char pcie_link_speed[];
+extern const char *pci_bus_speed_strings[];
 extern bool pci_early_dump;

 bool pcie_cap_has_lnkctl(const struct pci_dev *dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 512cb43..3c70b87 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -678,6 +678,35 @@  const unsigned char pcie_link_speed[] = {
 	PCI_SPEED_UNKNOWN		/* F */
 };

+/* these strings match up with the values in pci_bus_speed */
+const char *pci_bus_speed_strings[] = {
+	"33 MHz PCI",		/* 0x00 */
+	"66 MHz PCI",		/* 0x01 */
+	"66 MHz PCI-X",		/* 0x02 */
+	"100 MHz PCI-X",	/* 0x03 */
+	"133 MHz PCI-X",	/* 0x04 */
+	NULL,			/* 0x05 */
+	NULL,			/* 0x06 */
+	NULL,			/* 0x07 */
+	NULL,			/* 0x08 */
+	"66 MHz PCI-X 266",	/* 0x09 */
+	"100 MHz PCI-X 266",	/* 0x0a */
+	"133 MHz PCI-X 266",	/* 0x0b */
+	"Unknown AGP",		/* 0x0c */
+	"1x AGP",		/* 0x0d */
+	"2x AGP",		/* 0x0e */
+	"4x AGP",		/* 0x0f */
+	"8x AGP",		/* 0x10 */
+	"66 MHz PCI-X 533",	/* 0x11 */
+	"100 MHz PCI-X 533",	/* 0x12 */
+	"133 MHz PCI-X 533",	/* 0x13 */
+	"2.5 GT/s",	/* 0x14 */
+	"5.0 GT/s",	/* 0x15 */
+	"8.0 GT/s",	/* 0x16 */
+	"16.0 GT/s",	/* 0x17 */
+	"32.0 GT/s",	/* 0x18 */
+};
+
 void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
 {
 	bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS];
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index ae4aa0e..140dafb 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -49,43 +49,14 @@  static ssize_t address_read_file(struct pci_slot *slot, char *buf)
 				slot->number);
 }

-/* these strings match up with the values in pci_bus_speed */
-static const char *pci_bus_speed_strings[] = {
-	"33 MHz PCI",		/* 0x00 */
-	"66 MHz PCI",		/* 0x01 */
-	"66 MHz PCI-X",		/* 0x02 */
-	"100 MHz PCI-X",	/* 0x03 */
-	"133 MHz PCI-X",	/* 0x04 */
-	NULL,			/* 0x05 */
-	NULL,			/* 0x06 */
-	NULL,			/* 0x07 */
-	NULL,			/* 0x08 */
-	"66 MHz PCI-X 266",	/* 0x09 */
-	"100 MHz PCI-X 266",	/* 0x0a */
-	"133 MHz PCI-X 266",	/* 0x0b */
-	"Unknown AGP",		/* 0x0c */
-	"1x AGP",		/* 0x0d */
-	"2x AGP",		/* 0x0e */
-	"4x AGP",		/* 0x0f */
-	"8x AGP",		/* 0x10 */
-	"66 MHz PCI-X 533",	/* 0x11 */
-	"100 MHz PCI-X 533",	/* 0x12 */
-	"133 MHz PCI-X 533",	/* 0x13 */
-	"2.5 GT/s PCIe",	/* 0x14 */
-	"5.0 GT/s PCIe",	/* 0x15 */
-	"8.0 GT/s PCIe",	/* 0x16 */
-	"16.0 GT/s PCIe",	/* 0x17 */
-	"32.0 GT/s PCIe",	/* 0x18 */
-};
-
 static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
 {
 	const char *speed_string;

-	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
-		speed_string = pci_bus_speed_strings[speed];
-	else
+	if (speed == PCI_SPEED_UNKNOWN)
 		speed_string = "Unknown";
+	else
+		speed_string = pci_bus_speed_strings[speed];

 	return sprintf(buf, "%s\n", speed_string);
 }