Message ID | 1308035513-7462-2-git-send-email-holger.brunck@keymile.com |
---|---|
State | Superseded |
Headers | show |
> -----Original Message----- > From: Holger Brunck [mailto:holger.brunck@keymile.com] > Sent: Tuesday, June 14, 2011 12:42 PM > To: u-boot@lists.denx.de > Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Heiko Schocher > Subject: [PATCH 2/2] arm/km: fix u-boot.kwb build breakage > > commit 010a958b > (arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h) > breaks building keymile arm targets, when u-boot.kwb tries to > generate the binary with mkimage. A simple make <board> or MAKEALL > succeeded because it don't try to build the kirwood binary at the end. > > Due this commit we use the CONFIG_SYS_KWD_CONFIG from the > arch-kirkwood/config.h and it was removed from the board config. > But it was forgotten to include the header. Now the header is included > in km_arm.h. Some other defines were obsolete due to this include, > these are also removed in this commit. > > Signed-off-by: Holger Brunck <holger.brunck@keymile.com> > cc: Valentin Longchamp <valentin.longchamp@keymile.com> > cc: Prafulla Wadaskar <prafulla@marvell.com> > cc: Heiko Schocher <hs@denx.de> > --- > include/configs/km/km_arm.h | 30 +++++++----------------------- > include/configs/mgcoge3un.h | 1 + > 2 files changed, 8 insertions(+), 23 deletions(-) > > diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h > index 20ee6ea..29815be 100644 > --- a/include/configs/km/km_arm.h > +++ b/include/configs/km/km_arm.h > @@ -40,15 +40,20 @@ > * High Level Configuration Options (easy to change) > */ > #define CONFIG_MARVELL > -#define CONFIG_ARM926EJS /* Basic Architecture */ > #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ > #define CONFIG_KIRKWOOD /* SOC Family Name */ > -#define CONFIG_KW88F6281 /* SOC Name */ > #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ > > /* include common defines/options for all Keymile boards */ > #include "keymile-common.h" > > +#define CONFIG_KW88F6281 /* SOC Name */ Why did you moved this from top to here? > +#define CONFIG_CMD_NAND > +#define CONFIG_CMD_SF I think CONFIG_CMD_XXX should ideally below #include <config_cmd_default.h> and that too in <board_config>.h file. Rest Ack of the patch Regards.. Prafulla . .
Hi Prafulla, On 06/15/2011 09:18 AM, Prafulla Wadaskar wrote: > > >> -----Original Message----- >> From: Holger Brunck [mailto:holger.brunck@keymile.com] >> Sent: Tuesday, June 14, 2011 12:42 PM >> To: u-boot@lists.denx.de >> Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Heiko Schocher >> Subject: [PATCH 2/2] arm/km: fix u-boot.kwb build breakage >> >> commit 010a958b >> (arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h) >> breaks building keymile arm targets, when u-boot.kwb tries to >> generate the binary with mkimage. A simple make <board> or MAKEALL >> succeeded because it don't try to build the kirwood binary at the end. >> >> Due this commit we use the CONFIG_SYS_KWD_CONFIG from the >> arch-kirkwood/config.h and it was removed from the board config. >> But it was forgotten to include the header. Now the header is included >> in km_arm.h. Some other defines were obsolete due to this include, >> these are also removed in this commit. >> >> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> >> cc: Valentin Longchamp <valentin.longchamp@keymile.com> >> cc: Prafulla Wadaskar <prafulla@marvell.com> >> cc: Heiko Schocher <hs@denx.de> >> --- >> include/configs/km/km_arm.h | 30 +++++++----------------------- >> include/configs/mgcoge3un.h | 1 + >> 2 files changed, 8 insertions(+), 23 deletions(-) >> >> diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h >> index 20ee6ea..29815be 100644 >> --- a/include/configs/km/km_arm.h >> +++ b/include/configs/km/km_arm.h >> @@ -40,15 +40,20 @@ >> * High Level Configuration Options (easy to change) >> */ >> #define CONFIG_MARVELL >> -#define CONFIG_ARM926EJS /* Basic Architecture */ >> #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ >> #define CONFIG_KIRKWOOD /* SOC Family Name */ >> -#define CONFIG_KW88F6281 /* SOC Name */ >> #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ >> >> /* include common defines/options for all Keymile boards */ >> #include "keymile-common.h" >> >> +#define CONFIG_KW88F6281 /* SOC Name */ > > Why did you moved this from top to here? > Indeed this is unneeded. I fix this and resubmit. >> +#define CONFIG_CMD_NAND >> +#define CONFIG_CMD_SF > > I think CONFIG_CMD_XXX should ideally below #include <config_cmd_default.h> and that too in <board_config>.h file. > I agree for a single board support, but this is not possible in our approach. We include config_cmd_default.h in keymile-common.h. And keymile-common.h is valid for our powerpc and arm boards. In km_arm.h we add the CMD settings which are only additionaly needed on our arm boards. > Rest Ack of the patch > Ok. Best regards Holger
Le 15/06/2011 09:38, Holger Brunck a écrit : > I agree for a single board support, but this is not possible in our approach. We > include config_cmd_default.h in keymile-common.h. And keymile-common.h is valid > for our powerpc and arm boards. In km_arm.h we add the CMD settings which are > only additionaly needed on our arm boards. You can #undef things just as you can #define them after including default command headers -- I personally see no issue with this. Amicalement,
Hi Albert, On 07/16/2011 12:51 PM, Albert ARIBAUD wrote: > Le 15/06/2011 09:38, Holger Brunck a écrit : > >> I agree for a single board support, but this is not possible in our approach. We >> include config_cmd_default.h in keymile-common.h. And keymile-common.h is valid >> for our powerpc and arm boards. In km_arm.h we add the CMD settings which are >> only additionaly needed on our arm boards. > > You can #undef things just as you can #define them after including default > command headers -- I personally see no issue with this. > yes you are right it could be done this way. But I think it's more clearly arranged if we only define the commands in keymile-common.h wich are common for all keymile boards rather to define a superset there and undef them later on in km-powerpc.h or km_arm.h. Best regards Holger Brunck
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 20ee6ea..29815be 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -40,15 +40,20 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_MARVELL -#define CONFIG_ARM926EJS /* Basic Architecture */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ #define CONFIG_KIRKWOOD /* SOC Family Name */ -#define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF +#define CONFIG_SOFT_I2C /* I2C bit-banged */ + +#include "asm/arch/config.h" + #define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */ #define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */ #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ @@ -75,12 +80,7 @@ #define CONFIG_KM_ARCH_DBG_FILE "scripts/debug-arm-env.txt" -#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ - #define CONFIG_MISC_INIT_R /* @@ -116,7 +116,6 @@ */ #define CONFIG_CMD_ELF #define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND #define CONFIG_CMD_NFS /* @@ -131,8 +130,6 @@ */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 -#define CONFIG_NAND_KIRKWOOD -#define CONFIG_SYS_NAND_BASE 0xd8000000 #define BOOTFLASH_START 0x0 @@ -175,8 +172,6 @@ /* * I2C related stuff */ -#define CONFIG_SOFT_I2C /* I2C bit-banged */ - #define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ #if defined(CONFIG_SOFT_I2C) #ifndef __ASSEMBLY__ @@ -200,8 +195,6 @@ int get_scl(void); #define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ #define I2C_SOFT_DECLARATIONS -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_SPEED 100000 #endif #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 @@ -224,15 +217,8 @@ int get_scl(void); #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_CMD_SF - #define CONFIG_SPI_FLASH -#define CONFIG_HARD_SPI -#define CONFIG_KIRKWOOD_SPI #define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */ #define FLASH_GPIO_PIN 0x00010000 @@ -272,8 +258,6 @@ int get_scl(void); /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Kirkwood has 2k of Security SRAM, use it for SP */ -#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 /* Do early setups now in board_init_f() */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h index 6d56d7d..8d1b61f 100644 --- a/include/configs/mgcoge3un.h +++ b/include/configs/mgcoge3un.h @@ -48,6 +48,7 @@ #define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ /* we use a new RAM type on mgcoge3un board */ +#undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg /*
commit 010a958b (arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h) breaks building keymile arm targets, when u-boot.kwb tries to generate the binary with mkimage. A simple make <board> or MAKEALL succeeded because it don't try to build the kirwood binary at the end. Due this commit we use the CONFIG_SYS_KWD_CONFIG from the arch-kirkwood/config.h and it was removed from the board config. But it was forgotten to include the header. Now the header is included in km_arm.h. Some other defines were obsolete due to this include, these are also removed in this commit. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de> --- include/configs/km/km_arm.h | 30 +++++++----------------------- include/configs/mgcoge3un.h | 1 + 2 files changed, 8 insertions(+), 23 deletions(-)