Message ID | 20200202124828.2100-1-freifunk@adrianschmutzler.de |
---|---|
State | Superseded |
Headers | show |
Series | [OpenWrt-Devel] ath79: introduces KERNEL_LZMA variable for common build sequence | expand |
Hi Adrian, On 02.02.2020 13:48, Adrian Schmutzler wrote: > This introduce a variable KERNEL_LZMA to replace the frequently > used sequence "kernel-bin | append-dtb | lzma", similar to the > KERNEL_DTB variable in ramips target. So in results we will have: ramips: KERNEL_DTB = kernel-bin | append-dtb | lzma ath79: KERNEL_LZMA := kernel-bin | append-dtb | lzma Is there any reason to use different var name in ath79? Also, see: https://chris.beams.io/posts/git-commit/#imperative
Hi Piotr, > -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org] > On Behalf Of Piotr Dymacz > Sent: Sonntag, 2. Februar 2020 18:02 > To: Adrian Schmutzler <freifunk@adrianschmutzler.de>; openwrt- > devel@lists.openwrt.org > Subject: Re: [OpenWrt-Devel] [PATCH] ath79: introduces KERNEL_LZMA > variable for common build sequence > > Hi Adrian, > > On 02.02.2020 13:48, Adrian Schmutzler wrote: > > This introduce a variable KERNEL_LZMA to replace the frequently used > > sequence "kernel-bin | append-dtb | lzma", similar to the KERNEL_DTB > > variable in ramips target. > > So in results we will have: > > ramips: KERNEL_DTB = kernel-bin | append-dtb | lzma > ath79: KERNEL_LZMA := kernel-bin | append-dtb | lzma > > Is there any reason to use different var name in ath79? In ath79 we have some cases where gzip is used instead of lzma, e.g. https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/image/common-tp-link.mk#L42 Thus, if we use KERNEL_DTB for the case with lzma, it would be misleading, as the name only tells us about the DTB. So, we could either just use " KERNEL_DTB := kernel-bin | append-dtb ", which is too short to be helpful IMO, or use a more indicative name for the VARIABLE, which I thought I found. Actually, I would consider it more correct to change the name for ramips, too. We could also use KERNEL_DTB_LZMA of course, but I do not think this will really bring a benefit. Best Adrian > > Also, see: https://chris.beams.io/posts/git-commit/#imperative > > -- > Cheers, > Piotr > > > Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> > > --- > > target/linux/ath79/image/Makefile | 5 +++-- > > target/linux/ath79/image/common-mikrotik.mk | 4 ++-- > > target/linux/ath79/image/common-tp-link.mk | 14 ++++++-------- > > target/linux/ath79/image/generic-tp-link.mk | 5 ++--- > > target/linux/ath79/image/generic-ubnt.mk | 2 +- > > target/linux/ath79/image/generic.mk | 10 +++++----- > > 6 files changed, 19 insertions(+), 21 deletions(-) > > > > diff --git a/target/linux/ath79/image/Makefile > > b/target/linux/ath79/image/Makefile > > index a28658ec0b..71ffa4b429 100644 > > --- a/target/linux/ath79/image/Makefile > > +++ b/target/linux/ath79/image/Makefile > > @@ -52,6 +52,7 @@ define Build/relocate-kernel > > rm -rf $@.relocate > > endef > > > > +KERNEL_LZMA := kernel-bin | append-dtb | lzma > > > > define Device/Default > > DEVICE_DTS_DIR := ../dts > > @@ -59,8 +60,8 @@ define Device/Default > > PROFILES = Default > > MTDPARTS := > > BLOCKSIZE := 64k > > - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma > > - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma > > + KERNEL := $(KERNEL_LZMA) | uImage lzma KERNEL_INITRAMFS := > > + $(KERNEL_LZMA) | uImage lzma > > COMPILE := > > SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) > > IMAGES := sysupgrade.bin > > diff --git a/target/linux/ath79/image/common-mikrotik.mk > > b/target/linux/ath79/image/common-mikrotik.mk > > index 292237c76a..6531619fe9 100644 > > --- a/target/linux/ath79/image/common-mikrotik.mk > > +++ b/target/linux/ath79/image/common-mikrotik.mk > > @@ -2,6 +2,6 @@ define Device/mikrotik > > DEVICE_VENDOR := MikroTik > > DEVICE_PACKAGES := rbextract rbcfg > > LOADER_TYPE := elf > > - KERNEL := kernel-bin | append-dtb | lzma | loader-kernel > > - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader- > kernel > > + KERNEL := $(KERNEL_LZMA) | loader-kernel > > + KERNEL_INITRAMFS := $(KERNEL_LZMA) | loader-kernel > > endef > > diff --git a/target/linux/ath79/image/common-tp-link.mk > > b/target/linux/ath79/image/common-tp-link.mk > > index a9fccd0fe6..abce4095c4 100644 > > --- a/target/linux/ath79/image/common-tp-link.mk > > +++ b/target/linux/ath79/image/common-tp-link.mk > > @@ -14,8 +14,8 @@ define Device/tplink-v1 > > TPLINK_HWREV := 0x1 > > TPLINK_HEADER_VERSION := 1 > > LOADER_TYPE := gz > > - KERNEL := kernel-bin | append-dtb | lzma > > - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | > > tplink-v1-header > > + KERNEL := $(KERNEL_LZMA) > > + KERNEL_INITRAMFS := $(KERNEL_LZMA) | tplink-v1-header > > IMAGES += factory.bin > > IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append- > metadata > > IMAGE/factory.bin := tplink-v1-image factory @@ -26,8 +26,7 @@ > > define Device/tplink-nolzma > > LOADER_FLASH_OFFS := 0x22000 > > COMPILE := loader-$(1).gz > > COMPILE/loader-$(1).gz := loader-okli-compile > > - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | > \ > > - loader-okli $(1) 7680 > > + KERNEL := $(KERNEL_LZMA) | uImage lzma -M 0x4f4b4c49 | loader-okli > > + $(1) 7680 > > KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | tplink-v1-header > > endef > > > > @@ -63,7 +62,7 @@ endef > > > > define Device/tplink-safeloader > > $(Device/tplink-v1) > > - KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O > > + KERNEL := $(KERNEL_LZMA) | tplink-v1-header -O > > IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade > | \ > > append-metadata | check-size $$$$(IMAGE_SIZE) > > IMAGE/factory.bin := append-rootfs | tplink-safeloader factory @@ > > -71,7 +70,7 @@ endef > > > > define Device/tplink-safeloader-uimage > > $(Device/tplink-safeloader) > > - KERNEL := kernel-bin | append-dtb | lzma | uImageArcher lzma > > + KERNEL := $(KERNEL_LZMA) | uImageArcher lzma > > endef > > > > define Device/tplink-safeloader-okli @@ -80,6 +79,5 @@ define > > Device/tplink-safeloader-okli > > LOADER_FLASH_OFFS := 0x43000 > > COMPILE := loader-$(1).elf > > COMPILE/loader-$(1).elf := loader-okli-compile > > - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | > \ > > - loader-okli $(1) 12288 > > + KERNEL := $(KERNEL_LZMA) | uImage lzma -M 0x4f4b4c49 | loader-okli > > + $(1) 12288 > > endef > > diff --git a/target/linux/ath79/image/generic-tp-link.mk > > b/target/linux/ath79/image/generic-tp-link.mk > > index f1a603dc6d..30e6f979c4 100644 > > --- a/target/linux/ath79/image/generic-tp-link.mk > > +++ b/target/linux/ath79/image/generic-tp-link.mk > > @@ -203,9 +203,8 @@ define Device/tplink_archer-d50-v1 > > TPLINK_FLASHLAYOUT := 8Mqca > > TPLINK_HWREVADD := 0x00000000 > > TPLINK_HVERSION := 3 > > - KERNEL := kernel-bin | append-dtb | lzma > > - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | \ > > - tplink-v2-header -s -V "ver. 1.0" > > + KERNEL := $(KERNEL_LZMA) > > + KERNEL_INITRAMFS := $(KERNEL_LZMA) | tplink-v2-header -s -V "ver. > 1.0" > > IMAGES := sysupgrade.bin > > IMAGE/sysupgrade.bin := tplink-v2-image -s -V "ver. 2.0" | append- > metadata | \ > > check-size $$$$(IMAGE_SIZE) > > diff --git a/target/linux/ath79/image/generic-ubnt.mk > > b/target/linux/ath79/image/generic-ubnt.mk > > index ffae83eda5..bbacd393cb 100644 > > --- a/target/linux/ath79/image/generic-ubnt.mk > > +++ b/target/linux/ath79/image/generic-ubnt.mk > > @@ -220,7 +220,7 @@ define Device/ubnt_routerstation_common > > IMAGES := factory.bin > > IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | \ > > check-size $$$$(IMAGE_SIZE) > > - KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) > > + KERNEL := $(KERNEL_LZMA) | pad-to $$(BLOCKSIZE) > > KERNEL_INITRAMFS := kernel-bin | append-dtb > > endef > > > > diff --git a/target/linux/ath79/image/generic.mk > > b/target/linux/ath79/image/generic.mk > > index 1bc7b2d68e..7555ce4024 100644 > > --- a/target/linux/ath79/image/generic.mk > > +++ b/target/linux/ath79/image/generic.mk > > @@ -105,7 +105,7 @@ define Device/adtran_bsap1880 > > SOC := ar7161 > > DEVICE_VENDOR := Adtran/Bluesocket > > DEVICE_PACKAGES += -swconfig -uboot-envtools fconfig > > - KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) > > + KERNEL := $(KERNEL_LZMA) | pad-to $$(BLOCKSIZE) > > KERNEL_INITRAMFS := kernel-bin | append-dtb > > IMAGE_SIZE := 11200k > > IMAGES += kernel.bin rootfs.bin > > @@ -151,7 +151,7 @@ define Device/avm_fritz300e > > SOC := ar7242 > > DEVICE_VENDOR := AVM > > DEVICE_MODEL := FRITZ!WLAN Repeater 300E > > - KERNEL := kernel-bin | append-dtb | lzma | eva-image > > + KERNEL := $(KERNEL_LZMA) | eva-image > > KERNEL_INITRAMFS := $$(KERNEL) > > IMAGE_SIZE := 15232k > > IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ @@ -166,7 > > +166,7 @@ define Device/avm_fritz4020 > > DEVICE_VENDOR := AVM > > DEVICE_MODEL := FRITZ!Box 4020 > > IMAGE_SIZE := 15232k > > - KERNEL := kernel-bin | append-dtb | lzma | eva-image > > + KERNEL := $(KERNEL_LZMA) | eva-image > > KERNEL_INITRAMFS := $$(KERNEL) > > IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ > > append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | > > pad-rootfs | \ @@ -712,7 +712,7 @@ define Device/jjplus_ja76pf2 > > IMAGES := kernel.bin rootfs.bin > > IMAGE/kernel.bin := append-kernel > > IMAGE/rootfs.bin := append-rootfs | pad-rootfs > > - KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) > > + KERNEL := $(KERNEL_LZMA) | pad-to $$(BLOCKSIZE) > > KERNEL_INITRAMFS := kernel-bin | append-dtb > > IMAGE_SIZE := 16000k > > SUPPORTED_DEVICES += ja76pf2 > > @@ -992,7 +992,7 @@ define Device/pisen_wmb001n > > COMPILE/loader-$(1).bin := loader-okli-compile > > COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | > lzma | \ > > uImage lzma > > - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M > > 0x4f4b4c49 > > + KERNEL := $(KERNEL_LZMA) | uImage lzma -M 0x4f4b4c49 > > IMAGES += factory.bin > > IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pisen_wmb001n- > factory $(1) > > endef > > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hi Adrian, On 02.02.2020 18:20, mail@adrianschmutzler.de wrote: > Hi Piotr, > >> -----Original Message----- >> From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org] >> On Behalf Of Piotr Dymacz >> Sent: Sonntag, 2. Februar 2020 18:02 >> To: Adrian Schmutzler <freifunk@adrianschmutzler.de>; openwrt- >> devel@lists.openwrt.org >> Subject: Re: [OpenWrt-Devel] [PATCH] ath79: introduces KERNEL_LZMA >> variable for common build sequence >> >> Hi Adrian, >> >> On 02.02.2020 13:48, Adrian Schmutzler wrote: >> > This introduce a variable KERNEL_LZMA to replace the frequently used >> > sequence "kernel-bin | append-dtb | lzma", similar to the KERNEL_DTB >> > variable in ramips target. >> >> So in results we will have: >> >> ramips: KERNEL_DTB = kernel-bin | append-dtb | lzma >> ath79: KERNEL_LZMA := kernel-bin | append-dtb | lzma >> >> Is there any reason to use different var name in ath79? > > In ath79 we have some cases where gzip is used instead of lzma, e.g. > https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/image/common-tp-link.mk#L42 Plus some where no compression is used. > Thus, if we use KERNEL_DTB for the case with lzma, it would be misleading, as the name only tells us about the DTB. One code base, two variables with same values using different names? That looks wrong to me. > So, we could either just use " KERNEL_DTB := kernel-bin | append-dtb ", which is too short to be helpful IMO, or use a more indicative name for the VARIABLE, which I thought I found. Actually, I would consider it more correct to change the name for ramips, too. 'KERNEL_DTB := kernel-bin | append-dtb' would cover almost everything, including KERNEL_INITRAMFS, but I agree that wouldn't help much. > We could also use KERNEL_DTB_LZMA of course, but I do not think this will really bring a benefit. "There are only two hard things in Computer Science: cache invalidation and naming things." :) I care more about consistency in naming variables carrying same values than the name itself.
Op 2 feb. 2020, om 18:20 heeft mail@adrianschmutzler.de het volgende geschreven: > ... > We could also use KERNEL_DTB_LZMA of course, but I do not think this will really bring a benefit. Preferable, as it is more clear what it is supposed to do, e.g. to those that are not enjoying the OpenWrt makefile magic on a every day basis. Regards, Paul
> -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org] On > Behalf Of Paul Oranje > Sent: Sonntag, 2. Februar 2020 23:26 > To: <mail@adrianschmutzler.de> <mail@adrianschmutzler.de> > Cc: openwrt-devel@lists.openwrt.org; Piotr Dymacz <pepe2k@gmail.com> > Subject: Re: [OpenWrt-Devel] [PATCH] ath79: introduces KERNEL_LZMA variable > for common build sequence > > Op 2 feb. 2020, om 18:20 heeft mail@adrianschmutzler.de het volgende > geschreven: > > > ... > > We could also use KERNEL_DTB_LZMA of course, but I do not think this will > really bring a benefit. > Preferable, as it is more clear what it is supposed to do, e.g. to those that are not > enjoying the OpenWrt makefile magic on a every day basis. Okay, so I just use that one on ramips (change) and ath79 (introduction). > > Regards, > Paul > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hi, what is the actual benefit of this? The image building recipes are hard enough to understand as-is, is it really worth it to replace a plain "kernel-bin | append-dtb | lzma" command sequence with yet another variable indirection just to safe a few bytes in the Makefile? I could understand the appeal of introducing a macro (or variable) if there's a lot of repeated complex expressions in each KERNEL := ... recipe but that isn't the case here. If you really want to go down this route, then introducing an actual new build step which aggregates the three steps into one would be cleaner imho. Something similar to the following; define Build/kernel-dtb-lzma $(call Build/kernel-bin) $(call Build/append-dtb) $(call Build/lzma) endef And then KERNEL := kernel-dtb-lzma | uImage lzma ~ Jo
diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile index a28658ec0b..71ffa4b429 100644 --- a/target/linux/ath79/image/Makefile +++ b/target/linux/ath79/image/Makefile @@ -52,6 +52,7 @@ define Build/relocate-kernel rm -rf $@.relocate endef +KERNEL_LZMA := kernel-bin | append-dtb | lzma define Device/Default DEVICE_DTS_DIR := ../dts @@ -59,8 +60,8 @@ define Device/Default PROFILES = Default MTDPARTS := BLOCKSIZE := 64k - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma + KERNEL := $(KERNEL_LZMA) | uImage lzma + KERNEL_INITRAMFS := $(KERNEL_LZMA) | uImage lzma COMPILE := SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) IMAGES := sysupgrade.bin diff --git a/target/linux/ath79/image/common-mikrotik.mk b/target/linux/ath79/image/common-mikrotik.mk index 292237c76a..6531619fe9 100644 --- a/target/linux/ath79/image/common-mikrotik.mk +++ b/target/linux/ath79/image/common-mikrotik.mk @@ -2,6 +2,6 @@ define Device/mikrotik DEVICE_VENDOR := MikroTik DEVICE_PACKAGES := rbextract rbcfg LOADER_TYPE := elf - KERNEL := kernel-bin | append-dtb | lzma | loader-kernel - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel + KERNEL := $(KERNEL_LZMA) | loader-kernel + KERNEL_INITRAMFS := $(KERNEL_LZMA) | loader-kernel endef diff --git a/target/linux/ath79/image/common-tp-link.mk b/target/linux/ath79/image/common-tp-link.mk index a9fccd0fe6..abce4095c4 100644 --- a/target/linux/ath79/image/common-tp-link.mk +++ b/target/linux/ath79/image/common-tp-link.mk @@ -14,8 +14,8 @@ define Device/tplink-v1 TPLINK_HWREV := 0x1 TPLINK_HEADER_VERSION := 1 LOADER_TYPE := gz - KERNEL := kernel-bin | append-dtb | lzma - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | tplink-v1-header + KERNEL := $(KERNEL_LZMA) + KERNEL_INITRAMFS := $(KERNEL_LZMA) | tplink-v1-header IMAGES += factory.bin IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata IMAGE/factory.bin := tplink-v1-image factory @@ -26,8 +26,7 @@ define Device/tplink-nolzma LOADER_FLASH_OFFS := 0x22000 COMPILE := loader-$(1).gz COMPILE/loader-$(1).gz := loader-okli-compile - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | \ - loader-okli $(1) 7680 + KERNEL := $(KERNEL_LZMA) | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 7680 KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | tplink-v1-header endef @@ -63,7 +62,7 @@ endef define Device/tplink-safeloader $(Device/tplink-v1) - KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O + KERNEL := $(KERNEL_LZMA) | tplink-v1-header -O IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \ append-metadata | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := append-rootfs | tplink-safeloader factory @@ -71,7 +70,7 @@ endef define Device/tplink-safeloader-uimage $(Device/tplink-safeloader) - KERNEL := kernel-bin | append-dtb | lzma | uImageArcher lzma + KERNEL := $(KERNEL_LZMA) | uImageArcher lzma endef define Device/tplink-safeloader-okli @@ -80,6 +79,5 @@ define Device/tplink-safeloader-okli LOADER_FLASH_OFFS := 0x43000 COMPILE := loader-$(1).elf COMPILE/loader-$(1).elf := loader-okli-compile - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | \ - loader-okli $(1) 12288 + KERNEL := $(KERNEL_LZMA) | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288 endef diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index f1a603dc6d..30e6f979c4 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -203,9 +203,8 @@ define Device/tplink_archer-d50-v1 TPLINK_FLASHLAYOUT := 8Mqca TPLINK_HWREVADD := 0x00000000 TPLINK_HVERSION := 3 - KERNEL := kernel-bin | append-dtb | lzma - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | \ - tplink-v2-header -s -V "ver. 1.0" + KERNEL := $(KERNEL_LZMA) + KERNEL_INITRAMFS := $(KERNEL_LZMA) | tplink-v2-header -s -V "ver. 1.0" IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := tplink-v2-image -s -V "ver. 2.0" | append-metadata | \ check-size $$$$(IMAGE_SIZE) diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index ffae83eda5..bbacd393cb 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -220,7 +220,7 @@ define Device/ubnt_routerstation_common IMAGES := factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | \ check-size $$$$(IMAGE_SIZE) - KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) + KERNEL := $(KERNEL_LZMA) | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb endef diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 1bc7b2d68e..7555ce4024 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -105,7 +105,7 @@ define Device/adtran_bsap1880 SOC := ar7161 DEVICE_VENDOR := Adtran/Bluesocket DEVICE_PACKAGES += -swconfig -uboot-envtools fconfig - KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) + KERNEL := $(KERNEL_LZMA) | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb IMAGE_SIZE := 11200k IMAGES += kernel.bin rootfs.bin @@ -151,7 +151,7 @@ define Device/avm_fritz300e SOC := ar7242 DEVICE_VENDOR := AVM DEVICE_MODEL := FRITZ!WLAN Repeater 300E - KERNEL := kernel-bin | append-dtb | lzma | eva-image + KERNEL := $(KERNEL_LZMA) | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE_SIZE := 15232k IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ @@ -166,7 +166,7 @@ define Device/avm_fritz4020 DEVICE_VENDOR := AVM DEVICE_MODEL := FRITZ!Box 4020 IMAGE_SIZE := 15232k - KERNEL := kernel-bin | append-dtb | lzma | eva-image + KERNEL := $(KERNEL_LZMA) | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \ @@ -712,7 +712,7 @@ define Device/jjplus_ja76pf2 IMAGES := kernel.bin rootfs.bin IMAGE/kernel.bin := append-kernel IMAGE/rootfs.bin := append-rootfs | pad-rootfs - KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) + KERNEL := $(KERNEL_LZMA) | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb IMAGE_SIZE := 16000k SUPPORTED_DEVICES += ja76pf2 @@ -992,7 +992,7 @@ define Device/pisen_wmb001n COMPILE/loader-$(1).bin := loader-okli-compile COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \ uImage lzma - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 + KERNEL := $(KERNEL_LZMA) | uImage lzma -M 0x4f4b4c49 IMAGES += factory.bin IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pisen_wmb001n-factory $(1) endef
This introduce a variable KERNEL_LZMA to replace the frequently used sequence "kernel-bin | append-dtb | lzma", similar to the KERNEL_DTB variable in ramips target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> --- target/linux/ath79/image/Makefile | 5 +++-- target/linux/ath79/image/common-mikrotik.mk | 4 ++-- target/linux/ath79/image/common-tp-link.mk | 14 ++++++-------- target/linux/ath79/image/generic-tp-link.mk | 5 ++--- target/linux/ath79/image/generic-ubnt.mk | 2 +- target/linux/ath79/image/generic.mk | 10 +++++----- 6 files changed, 19 insertions(+), 21 deletions(-)