| Message ID | 3b09a9b4-9d46-4f05-9c4d-420b93f0f88b.lettre@localhost |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL] Allwinner arm64 Defconfig Changes for 5.6 | expand |
On Fri, Jan 10, 2020 at 06:13:57PM +0100, Maxime Ripard wrote: > Hi, > > Please pull the following changes for the next release. > > Thanks! > Maxime > > The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a: > > Linux 5.5-rc1 (2019-12-08 14:57:55 -0800) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-config64-for-5.6 > > for you to fetch changes up to cb4132672f76954ddc234aa343b4d2a1f1b8437a: > > arm64: defconfig: Enable DRM_SUN6I_DSI (2020-01-02 10:30:35 +0100) > > ---------------------------------------------------------------- > Two patches to enable the new thermal sensor driver found on newer > Allwinner SoCs and to enable the MIPI-DSI controller. This adds a SUN8I_THERMAL that I can't find in the tree? (this also goes for the 32-bit branch) Also, is there a reason to have it =y, or would =m suffice? I see that RCAR is =y, but we should revisit that as well. -Olof
Hi Olof, On Fri, Jan 10, 2020 at 10:23:49PM -0800, Olof Johansson wrote: > On Fri, Jan 10, 2020 at 06:13:57PM +0100, Maxime Ripard wrote: > > Hi, > > > > Please pull the following changes for the next release. > > > > Thanks! > > Maxime > > > > The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a: > > > > Linux 5.5-rc1 (2019-12-08 14:57:55 -0800) > > > > are available in the Git repository at: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-config64-for-5.6 > > > > for you to fetch changes up to cb4132672f76954ddc234aa343b4d2a1f1b8437a: > > > > arm64: defconfig: Enable DRM_SUN6I_DSI (2020-01-02 10:30:35 +0100) > > > > ---------------------------------------------------------------- > > Two patches to enable the new thermal sensor driver found on newer > > Allwinner SoCs and to enable the MIPI-DSI controller. > > This adds a SUN8I_THERMAL that I can't find in the tree? (this also goes for > the 32-bit branch) This is a new driver that got merged through the thermal tree and should be in 5.6 as well: https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/commit/?h=thermal/linux-next&id=730a45ccd9322dd918a5dcaf8ae1482400fa5b23 > Also, is there a reason to have it =y, or would =m suffice? I see that RCAR is > =y, but we should revisit that as well. That driver is used for thermal throttling which is pretty critical for us since the boards can get pretty hot, pretty fast (and they don't have a pretty wide temperature operating range either), so it felt natural to have it as y? Maxime
On Sat, Jan 11, 2020 at 10:09:42AM +0100, Maxime Ripard wrote: > Hi Olof, > > On Fri, Jan 10, 2020 at 10:23:49PM -0800, Olof Johansson wrote: > > On Fri, Jan 10, 2020 at 06:13:57PM +0100, Maxime Ripard wrote: > > > Hi, > > > > > > Please pull the following changes for the next release. > > > > > > Thanks! > > > Maxime > > > > > > The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a: > > > > > > Linux 5.5-rc1 (2019-12-08 14:57:55 -0800) > > > > > > are available in the Git repository at: > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-config64-for-5.6 > > > > > > for you to fetch changes up to cb4132672f76954ddc234aa343b4d2a1f1b8437a: > > > > > > arm64: defconfig: Enable DRM_SUN6I_DSI (2020-01-02 10:30:35 +0100) > > > > > > ---------------------------------------------------------------- > > > Two patches to enable the new thermal sensor driver found on newer > > > Allwinner SoCs and to enable the MIPI-DSI controller. > > > > This adds a SUN8I_THERMAL that I can't find in the tree? (this also goes for > > the 32-bit branch) > > This is a new driver that got merged through the thermal tree and > should be in 5.6 as well: > https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/commit/?h=thermal/linux-next&id=730a45ccd9322dd918a5dcaf8ae1482400fa5b23 The way we have been handling this is that we add the config options after the merge window instead. Because right now, if someone runs savedefconfig, they disappear. So, please submit after -rc1 (but not too far after) to enable new drivers merged in that window. > > Also, is there a reason to have it =y, or would =m suffice? I see that RCAR is > > =y, but we should revisit that as well. > > That driver is used for thermal throttling which is pretty critical > for us since the boards can get pretty hot, pretty fast (and they > don't have a pretty wide temperature operating range either), so it > felt natural to have it as y? The problem with this is that all platforms now have to pay the price of keeping this driver in memory even if it's not needed on that hardware. This is why we're pushing back on drivers being statically built in on the large shared defconfigs. Loading it from ramdisk is usually done early enough that it works out for these cases, or from rootfs if needed. -Olof
On Sat, Jan 11, 2020 at 02:58:20PM -0800, Olof Johansson wrote: > On Sat, Jan 11, 2020 at 10:09:42AM +0100, Maxime Ripard wrote: > > Hi Olof, > > > > On Fri, Jan 10, 2020 at 10:23:49PM -0800, Olof Johansson wrote: > > > On Fri, Jan 10, 2020 at 06:13:57PM +0100, Maxime Ripard wrote: > > > > Hi, > > > > > > > > Please pull the following changes for the next release. > > > > > > > > Thanks! > > > > Maxime > > > > > > > > The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a: > > > > > > > > Linux 5.5-rc1 (2019-12-08 14:57:55 -0800) > > > > > > > > are available in the Git repository at: > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-config64-for-5.6 > > > > > > > > for you to fetch changes up to cb4132672f76954ddc234aa343b4d2a1f1b8437a: > > > > > > > > arm64: defconfig: Enable DRM_SUN6I_DSI (2020-01-02 10:30:35 +0100) > > > > > > > > ---------------------------------------------------------------- > > > > Two patches to enable the new thermal sensor driver found on newer > > > > Allwinner SoCs and to enable the MIPI-DSI controller. > > > > > > This adds a SUN8I_THERMAL that I can't find in the tree? (this also goes for > > > the 32-bit branch) > > > > This is a new driver that got merged through the thermal tree and > > should be in 5.6 as well: > > https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/commit/?h=thermal/linux-next&id=730a45ccd9322dd918a5dcaf8ae1482400fa5b23 > > The way we have been handling this is that we add the config options > after the merge window instead. Because right now, if someone runs > savedefconfig, they disappear. > > So, please submit after -rc1 (but not too far after) to enable new > drivers merged in that window. Ok, I'll send them right after -rc1 then ... > > > Also, is there a reason to have it =y, or would =m suffice? I see that RCAR is > > > =y, but we should revisit that as well. > > > > That driver is used for thermal throttling which is pretty critical > > for us since the boards can get pretty hot, pretty fast (and they > > don't have a pretty wide temperature operating range either), so it > > felt natural to have it as y? > > The problem with this is that all platforms now have to pay the price > of keeping this driver in memory even if it's not needed on that > hardware. This is why we're pushing back on drivers being statically > built in on the large shared defconfigs. > > Loading it from ramdisk is usually done early enough that it works out for > these cases, or from rootfs if needed. And with the options as module. Thanks! Maxime
Hi, Please pull the following changes for the next release. Thanks! Maxime The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a: Linux 5.5-rc1 (2019-12-08 14:57:55 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-config64-for-5.6 for you to fetch changes up to cb4132672f76954ddc234aa343b4d2a1f1b8437a: arm64: defconfig: Enable DRM_SUN6I_DSI (2020-01-02 10:30:35 +0100) ---------------------------------------------------------------- Two patches to enable the new thermal sensor driver found on newer Allwinner SoCs and to enable the MIPI-DSI controller. ---------------------------------------------------------------- Jagan Teki (1): arm64: defconfig: Enable DRM_SUN6I_DSI Yangtao Li (1): arm64: defconfig: Enable CONFIG_SUN8I_THERMAL arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)