PCI: histb: improve GPIO reset implementation

It switches GPIO reset code to use gpio_desc, so that the code becomes
simpler and cleaner.  Also the GPIO signal should be implemented as
a pulse to trigger a reset, let's correct that in the meantime.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/pci/controller/dwc/pcie-histb.c | 35 ++++++++++---------------
 1 file changed, 14 insertions(+), 21 deletions(-)

On Tue, Jan 07, 2020 at 08:12:56PM +0800, Shawn Guo wrote:
> It switches GPIO reset code to use gpio_desc, so that the code becomes
> simpler and cleaner.  Also the GPIO signal should be implemented as
> a pulse to trigger a reset, let's correct that in the meantime.

The changelog makes it sound like this is a cleanup + a bug fix.  If
so, please put them in separate patches and describe the effect of the
bug, e.g., "reset doesn't work before this fix" or whatever.

Capitalize the subject ("PCI: histb: Improve...").

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-histb.c | 35 ++++++++++---------------
>  1 file changed, 14 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
> index 811b5c6d62ea..d47a8e6d6fa3 100644
> --- a/drivers/pci/controller/dwc/pcie-histb.c
> +++ b/drivers/pci/controller/dwc/pcie-histb.c
> @@ -60,7 +60,7 @@ struct histb_pcie {
>  	struct reset_control *sys_reset;
>  	struct reset_control *bus_reset;
>  	void __iomem *ctrl;
> -	int reset_gpio;
> +	struct gpio_desc *reset_gpio;
>  	struct regulator *vpcie;
>  };
>  
> @@ -219,9 +219,6 @@ static void histb_pcie_host_disable(struct histb_pcie *hipcie)
>  	clk_disable_unprepare(hipcie->sys_clk);
>  	clk_disable_unprepare(hipcie->bus_clk);
>  
> -	if (gpio_is_valid(hipcie->reset_gpio))
> -		gpio_set_value_cansleep(hipcie->reset_gpio, 0);
> -
>  	if (hipcie->vpcie)
>  		regulator_disable(hipcie->vpcie);
>  }
> @@ -242,9 +239,6 @@ static int histb_pcie_host_enable(struct pcie_port *pp)
>  		}
>  	}
>  
> -	if (gpio_is_valid(hipcie->reset_gpio))
> -		gpio_set_value_cansleep(hipcie->reset_gpio, 1);
> -
>  	ret = clk_prepare_enable(hipcie->bus_clk);
>  	if (ret) {
>  		dev_err(dev, "cannot prepare/enable bus clk\n");
> @@ -278,6 +272,14 @@ static int histb_pcie_host_enable(struct pcie_port *pp)
>  	reset_control_assert(hipcie->bus_reset);
>  	reset_control_deassert(hipcie->bus_reset);
>  
> +	if (hipcie->reset_gpio) {
> +		gpiod_set_value_cansleep(hipcie->reset_gpio, 1);
> +		usleep_range(100, 200);
> +		gpiod_set_value_cansleep(hipcie->reset_gpio, 0);
> +		/* wait for 1ms */
> +		usleep_range(1000, 2000);
> +	}
> +
>  	return 0;
>  
>  err_aux_clk:
> @@ -305,10 +307,7 @@ static int histb_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct pcie_port *pp;
>  	struct resource *res;
> -	struct device_node *np = pdev->dev.of_node;
>  	struct device *dev = &pdev->dev;
> -	enum of_gpio_flags of_flags;
> -	unsigned long flag = GPIOF_DIR_OUT;
>  	int ret;
>  
>  	hipcie = devm_kzalloc(dev, sizeof(*hipcie), GFP_KERNEL);
> @@ -345,17 +344,11 @@ static int histb_pcie_probe(struct platform_device *pdev)
>  		hipcie->vpcie = NULL;
>  	}
>  
> -	hipcie->reset_gpio = of_get_named_gpio_flags(np,
> -				"reset-gpios", 0, &of_flags);
> -	if (of_flags & OF_GPIO_ACTIVE_LOW)
> -		flag |= GPIOF_ACTIVE_LOW;
> -	if (gpio_is_valid(hipcie->reset_gpio)) {
> -		ret = devm_gpio_request_one(dev, hipcie->reset_gpio,
> -				flag, "PCIe device power control");
> -		if (ret) {
> -			dev_err(dev, "unable to request gpio\n");
> -			return ret;
> -		}
> +	hipcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +						     GPIOD_OUT_LOW);
> +	if (IS_ERR(hipcie->reset_gpio)) {
> +		ret = PTR_ERR(hipcie->reset_gpio);
> +		return ret;
>  	}
>  
>  	hipcie->aux_clk = devm_clk_get(dev, "aux");
> -- 
> 2.17.1
>