| Message ID | 20191129172537.31410-6-m.felsch@pengutronix.de |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | DA9062 PMIC features | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Fri, 29 Nov 2019 18:25:36 +0100, Marco Felsch wrote: > At the gpio-based regulator enable/disable documentation. This property > can be applied to each subnode within the 'regulators' node so each > regulator can be configured differently. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > --- > Changelog: > v3: > - adapt binding description > > Documentation/devicetree/bindings/mfd/da9062.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
On Fri, 29 Nov 2019, Marco Felsch wrote: > At the gpio-based regulator enable/disable documentation. This property > can be applied to each subnode within the 'regulators' node so each > regulator can be configured differently. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > --- > Changelog: > v3: > - adapt binding description > > Documentation/devicetree/bindings/mfd/da9062.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index b9cccd4c3f76..863b1199d875 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -74,6 +74,13 @@ Sub-nodes: Attention: Sharing the same GPI for other purposes or across multiple regulators is possible but the polarity setting must equal. + - dlg,ena-sense-gpios : A GPIO reference to a local general purpose input, + the datasheet calls it GPI. The regulator sense the input signal and enable + or disable the regulator output. The regulator output is enabled if the + the signal is active else the output is disabled. + Attention: Sharing the same GPI for other purposes or across multiple + regulators is possible but the polarity setting must equal. + - rtc : This node defines settings required for the Real-Time Clock associated with the DA9062. There are currently no entries in this binding, however compatible = "dlg,da9062-rtc" should be added if a node is created. @@ -111,6 +118,7 @@ Example: regulator-min-microvolt = <900000>; regulator-max-microvolt = <3600000>; regulator-boot-on; + dlg,ena-sense-gpios = <&pmic0 2 GPIO_ACTIVE_LOW>; }; }; };
At the gpio-based regulator enable/disable documentation. This property can be applied to each subnode within the 'regulators' node so each regulator can be configured differently. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- Changelog: v3: - adapt binding description Documentation/devicetree/bindings/mfd/da9062.txt | 8 ++++++++ 1 file changed, 8 insertions(+)