diff mbox series

hw/usb: Introduce Kconfig switches for the CCID card devices

Message ID 20191210072048.15603-1-thuth@redhat.com
State New
Headers show
Series hw/usb: Introduce Kconfig switches for the CCID card devices | expand

Commit Message

Thomas Huth Dec. 10, 2019, 7:20 a.m. UTC 
In our downstream distribution of QEMU, we need more fine-grained
control on the set of CCID card devices that we want to include.
So let's introduce some proper Kconfig switches that it is easier
to disable them without modifying the corresponding Makefile.objs.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/usb/Kconfig       | 10 ++++++++++
 hw/usb/Makefile.objs |  7 +++++--
 2 files changed, 15 insertions(+), 2 deletions(-)

Comments

Philippe Mathieu-Daudé Dec. 10, 2019, 7:43 a.m. UTC | #1 
On 12/10/19 8:20 AM, Thomas Huth wrote:
> In our downstream distribution of QEMU, we need more fine-grained
> control on the set of CCID card devices that we want to include.
> So let's introduce some proper Kconfig switches that it is easier
> to disable them without modifying the corresponding Makefile.objs.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>   hw/usb/Kconfig       | 10 ++++++++++
>   hw/usb/Makefile.objs |  7 +++++--
>   2 files changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
> index 555e09377b..1358847eba 100644
> --- a/hw/usb/Kconfig
> +++ b/hw/usb/Kconfig
> @@ -96,3 +96,13 @@ config USB_STORAGE_MTP
>       bool
>       default y
>       depends on USB
> +
> +config CCID_PASSTHRU
> +    bool
> +    default y
> +    depends on USB_SMARTCARD
> +
> +config CCID_EMULATED
> +    bool
> +    default y
> +    depends on USB_SMARTCARD
> diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
> index 303ac084a0..ebe103fb3d 100644
> --- a/hw/usb/Makefile.objs
> +++ b/hw/usb/Makefile.objs
> @@ -29,11 +29,14 @@ common-obj-$(CONFIG_USB_BLUETOOTH)    += dev-bluetooth.o
>   
>   ifeq ($(CONFIG_USB_SMARTCARD),y)
>   common-obj-y                          += dev-smartcard-reader.o
> -common-obj-$(CONFIG_SMARTCARD)        += smartcard.mo
> -smartcard.mo-objs := ccid-card-passthru.o ccid-card-emulated.o
> +ifeq ($(CONFIG_SMARTCARD),y)

We don't need the 'ifeq ($(CONFIG_SMARTCARD),y)' ... endif anymore.

> +common-obj-$(call lor,$(CONFIG_CCID_PASSTHRU),$(CONFIG_CCID_EMULATED)) += smartcard.mo
> +smartcard.mo-objs := $(call lif,$(CONFIG_CCID_PASSTHRU),ccid-card-passthru.o) \
> +                     $(call lif,$(CONFIG_CCID_EMULATED),ccid-card-emulated.o)
>   smartcard.mo-cflags := $(SMARTCARD_CFLAGS)
>   smartcard.mo-libs := $(SMARTCARD_LIBS)
>   endif
> +endif
>   
>   ifeq ($(CONFIG_POSIX),y)
>   common-obj-$(CONFIG_USB_STORAGE_MTP)  += dev-mtp.o
>
Thomas Huth Dec. 10, 2019, 8:11 a.m. UTC | #2 
On 10/12/2019 08.43, Philippe Mathieu-Daudé wrote:
> On 12/10/19 8:20 AM, Thomas Huth wrote:
>> In our downstream distribution of QEMU, we need more fine-grained
>> control on the set of CCID card devices that we want to include.
>> So let's introduce some proper Kconfig switches that it is easier
>> to disable them without modifying the corresponding Makefile.objs.
>>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>>   hw/usb/Kconfig       | 10 ++++++++++
>>   hw/usb/Makefile.objs |  7 +++++--
>>   2 files changed, 15 insertions(+), 2 deletions(-)
>>
>> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
>> index 555e09377b..1358847eba 100644
>> --- a/hw/usb/Kconfig
>> +++ b/hw/usb/Kconfig
>> @@ -96,3 +96,13 @@ config USB_STORAGE_MTP
>>       bool
>>       default y
>>       depends on USB
>> +
>> +config CCID_PASSTHRU
>> +    bool
>> +    default y
>> +    depends on USB_SMARTCARD
>> +
>> +config CCID_EMULATED
>> +    bool
>> +    default y
>> +    depends on USB_SMARTCARD
>> diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
>> index 303ac084a0..ebe103fb3d 100644
>> --- a/hw/usb/Makefile.objs
>> +++ b/hw/usb/Makefile.objs
>> @@ -29,11 +29,14 @@ common-obj-$(CONFIG_USB_BLUETOOTH)    +=
>> dev-bluetooth.o
>>     ifeq ($(CONFIG_USB_SMARTCARD),y)
>>   common-obj-y                          += dev-smartcard-reader.o
>> -common-obj-$(CONFIG_SMARTCARD)        += smartcard.mo
>> -smartcard.mo-objs := ccid-card-passthru.o ccid-card-emulated.o
>> +ifeq ($(CONFIG_SMARTCARD),y)
> 
> We don't need the 'ifeq ($(CONFIG_SMARTCARD),y)' ... endif anymore.

I think we do. Both files #include <libcacard.h> thus can only be
compiled if CONFIG_SMARTCARD has been set.
Don't mix CONFIG_SMARTCARD up with CONFIG_USB_SMARTCARD - these are two
different switches!

 Thomas


>> +common-obj-$(call
>> lor,$(CONFIG_CCID_PASSTHRU),$(CONFIG_CCID_EMULATED)) += smartcard.mo
>> +smartcard.mo-objs := $(call
>> lif,$(CONFIG_CCID_PASSTHRU),ccid-card-passthru.o) \
>> +                     $(call
>> lif,$(CONFIG_CCID_EMULATED),ccid-card-emulated.o)
>>   smartcard.mo-cflags := $(SMARTCARD_CFLAGS)
>>   smartcard.mo-libs := $(SMARTCARD_LIBS)
>>   endif
>> +endif
>>     ifeq ($(CONFIG_POSIX),y)
>>   common-obj-$(CONFIG_USB_STORAGE_MTP)  += dev-mtp.o
>>
>
Philippe Mathieu-Daudé Dec. 10, 2019, 1:27 p.m. UTC | #3 
On 12/10/19 9:11 AM, Thomas Huth wrote:
> On 10/12/2019 08.43, Philippe Mathieu-Daudé wrote:
>> On 12/10/19 8:20 AM, Thomas Huth wrote:
>>> In our downstream distribution of QEMU, we need more fine-grained
>>> control on the set of CCID card devices that we want to include.
>>> So let's introduce some proper Kconfig switches that it is easier
>>> to disable them without modifying the corresponding Makefile.objs.
>>>
>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>> ---
>>>    hw/usb/Kconfig       | 10 ++++++++++
>>>    hw/usb/Makefile.objs |  7 +++++--
>>>    2 files changed, 15 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
>>> index 555e09377b..1358847eba 100644
>>> --- a/hw/usb/Kconfig
>>> +++ b/hw/usb/Kconfig
>>> @@ -96,3 +96,13 @@ config USB_STORAGE_MTP
>>>        bool
>>>        default y
>>>        depends on USB
>>> +
>>> +config CCID_PASSTHRU
>>> +    bool
>>> +    default y
>>> +    depends on USB_SMARTCARD
>>> +
>>> +config CCID_EMULATED
>>> +    bool
>>> +    default y
>>> +    depends on USB_SMARTCARD
>>> diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
>>> index 303ac084a0..ebe103fb3d 100644
>>> --- a/hw/usb/Makefile.objs
>>> +++ b/hw/usb/Makefile.objs
>>> @@ -29,11 +29,14 @@ common-obj-$(CONFIG_USB_BLUETOOTH)    +=
>>> dev-bluetooth.o
>>>      ifeq ($(CONFIG_USB_SMARTCARD),y)
>>>    common-obj-y                          += dev-smartcard-reader.o
>>> -common-obj-$(CONFIG_SMARTCARD)        += smartcard.mo
>>> -smartcard.mo-objs := ccid-card-passthru.o ccid-card-emulated.o
>>> +ifeq ($(CONFIG_SMARTCARD),y)
>>
>> We don't need the 'ifeq ($(CONFIG_SMARTCARD),y)' ... endif anymore.
> 
> I think we do. Both files #include <libcacard.h> thus can only be
> compiled if CONFIG_SMARTCARD has been set.
> Don't mix CONFIG_SMARTCARD up with CONFIG_USB_SMARTCARD - these are two
> different switches!

OK I missed SMARTCARD is not in Kconfig.host.

What about adding that to your patch and remove the ifeq():

-- >8 --
diff --git a/Kconfig.host b/Kconfig.host
index bb6e116e2a..b532358854 100644
--- a/Kconfig.host
+++ b/Kconfig.host
@@ -35,3 +35,6 @@ config VIRTFS

  config PVRDMA
      bool
+
+config SMARTCARD
+    bool
diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 555e09377b..b3292a5cc9 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -90,7 +90,7 @@ config USB_BLUETOOTH
  config USB_SMARTCARD
      bool
      default y
-    depends on USB
+    depends on SMARTCARD && USB

  config USB_STORAGE_MTP
      bool
---

>>> +common-obj-$(call
>>> lor,$(CONFIG_CCID_PASSTHRU),$(CONFIG_CCID_EMULATED)) += smartcard.mo
>>> +smartcard.mo-objs := $(call
>>> lif,$(CONFIG_CCID_PASSTHRU),ccid-card-passthru.o) \
>>> +                     $(call
>>> lif,$(CONFIG_CCID_EMULATED),ccid-card-emulated.o)
>>>    smartcard.mo-cflags := $(SMARTCARD_CFLAGS)
>>>    smartcard.mo-libs := $(SMARTCARD_LIBS)
>>>    endif
>>> +endif
>>>      ifeq ($(CONFIG_POSIX),y)
>>>    common-obj-$(CONFIG_USB_STORAGE_MTP)  += dev-mtp.o
>>>
>>
>
Paolo Bonzini Dec. 10, 2019, 1:32 p.m. UTC | #4 
On 10/12/19 14:27, Philippe Mathieu-Daudé wrote:
> On 12/10/19 9:11 AM, Thomas Huth wrote:
>> On 10/12/2019 08.43, Philippe Mathieu-Daudé wrote:
>>> On 12/10/19 8:20 AM, Thomas Huth wrote:
>>>> In our downstream distribution of QEMU, we need more fine-grained
>>>> control on the set of CCID card devices that we want to include.
>>>> So let's introduce some proper Kconfig switches that it is easier
>>>> to disable them without modifying the corresponding Makefile.objs.
>>>>
>>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>>> ---
>>>>    hw/usb/Kconfig       | 10 ++++++++++
>>>>    hw/usb/Makefile.objs |  7 +++++--
>>>>    2 files changed, 15 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
>>>> index 555e09377b..1358847eba 100644
>>>> --- a/hw/usb/Kconfig
>>>> +++ b/hw/usb/Kconfig
>>>> @@ -96,3 +96,13 @@ config USB_STORAGE_MTP
>>>>        bool
>>>>        default y
>>>>        depends on USB
>>>> +
>>>> +config CCID_PASSTHRU
>>>> +    bool
>>>> +    default y
>>>> +    depends on USB_SMARTCARD
>>>> +
>>>> +config CCID_EMULATED
>>>> +    bool
>>>> +    default y
>>>> +    depends on USB_SMARTCARD
>>>> diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
>>>> index 303ac084a0..ebe103fb3d 100644
>>>> --- a/hw/usb/Makefile.objs
>>>> +++ b/hw/usb/Makefile.objs
>>>> @@ -29,11 +29,14 @@ common-obj-$(CONFIG_USB_BLUETOOTH)    +=
>>>> dev-bluetooth.o
>>>>      ifeq ($(CONFIG_USB_SMARTCARD),y)
>>>>    common-obj-y                          += dev-smartcard-reader.o
>>>> -common-obj-$(CONFIG_SMARTCARD)        += smartcard.mo
>>>> -smartcard.mo-objs := ccid-card-passthru.o ccid-card-emulated.o
>>>> +ifeq ($(CONFIG_SMARTCARD),y)
>>>
>>> We don't need the 'ifeq ($(CONFIG_SMARTCARD),y)' ... endif anymore.
>>
>> I think we do. Both files #include <libcacard.h> thus can only be
>> compiled if CONFIG_SMARTCARD has been set.
>> Don't mix CONFIG_SMARTCARD up with CONFIG_USB_SMARTCARD - these are two
>> different switches!
> 
> OK I missed SMARTCARD is not in Kconfig.host.
> 
> What about adding that to your patch and remove the ifeq():
> 
> -- >8 --
> diff --git a/Kconfig.host b/Kconfig.host
> index bb6e116e2a..b532358854 100644
> --- a/Kconfig.host
> +++ b/Kconfig.host
> @@ -35,3 +35,6 @@ config VIRTFS
> 
>  config PVRDMA
>      bool
> +
> +config SMARTCARD
> +    bool
> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
> index 555e09377b..b3292a5cc9 100644
> --- a/hw/usb/Kconfig
> +++ b/hw/usb/Kconfig
> @@ -90,7 +90,7 @@ config USB_BLUETOOTH
>  config USB_SMARTCARD
>      bool
>      default y
> -    depends on USB
> +    depends on SMARTCARD && USB
> 
>  config USB_STORAGE_MTP
>      bool

Yes, this is a good idea.

Paolo

> ---
> 
>>>> +common-obj-$(call
>>>> lor,$(CONFIG_CCID_PASSTHRU),$(CONFIG_CCID_EMULATED)) += smartcard.mo
>>>> +smartcard.mo-objs := $(call
>>>> lif,$(CONFIG_CCID_PASSTHRU),ccid-card-passthru.o) \
>>>> +                     $(call
>>>> lif,$(CONFIG_CCID_EMULATED),ccid-card-emulated.o)
>>>>    smartcard.mo-cflags := $(SMARTCARD_CFLAGS)
>>>>    smartcard.mo-libs := $(SMARTCARD_LIBS)
>>>>    endif
>>>> +endif
>>>>      ifeq ($(CONFIG_POSIX),y)
>>>>    common-obj-$(CONFIG_USB_STORAGE_MTP)  += dev-mtp.o
>>>>
>>>
>>
>
diff mbox series

Patch

diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 555e09377b..1358847eba 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -96,3 +96,13 @@  config USB_STORAGE_MTP
     bool
     default y
     depends on USB
+
+config CCID_PASSTHRU
+    bool
+    default y
+    depends on USB_SMARTCARD
+
+config CCID_EMULATED
+    bool
+    default y
+    depends on USB_SMARTCARD
diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
index 303ac084a0..ebe103fb3d 100644
--- a/hw/usb/Makefile.objs
+++ b/hw/usb/Makefile.objs
@@ -29,11 +29,14 @@  common-obj-$(CONFIG_USB_BLUETOOTH)    += dev-bluetooth.o
 
 ifeq ($(CONFIG_USB_SMARTCARD),y)
 common-obj-y                          += dev-smartcard-reader.o
-common-obj-$(CONFIG_SMARTCARD)        += smartcard.mo
-smartcard.mo-objs := ccid-card-passthru.o ccid-card-emulated.o
+ifeq ($(CONFIG_SMARTCARD),y)
+common-obj-$(call lor,$(CONFIG_CCID_PASSTHRU),$(CONFIG_CCID_EMULATED)) += smartcard.mo
+smartcard.mo-objs := $(call lif,$(CONFIG_CCID_PASSTHRU),ccid-card-passthru.o) \
+                     $(call lif,$(CONFIG_CCID_EMULATED),ccid-card-emulated.o)
 smartcard.mo-cflags := $(SMARTCARD_CFLAGS)
 smartcard.mo-libs := $(SMARTCARD_LIBS)
 endif
+endif
 
 ifeq ($(CONFIG_POSIX),y)
 common-obj-$(CONFIG_USB_STORAGE_MTP)  += dev-mtp.o