diff mbox series

, V7, #7 of 7, Turn on -mpcrel for Linux 64-bit, but not for other targets

Message ID 20191114231447.GG7528@ibm-toto.the-meissners.org
State New
Headers show
Series , V7, #7 of 7, Turn on -mpcrel for Linux 64-bit, but not for other targets | expand

Commit Message

Michael Meissner Nov. 14, 2019, 11:14 p.m. UTC 
This patch will enable prefixed addressing and PC-relative addressing if the OS
target support indicates that the OS supports either prefixed addressing and
whether it supports PC-relative addressing when the user uses -mcpu=future.  At
the moment, 64-bit Linux is the only system that enables both prefixed
addressing and PC-relative addressing.

I have built bootstrap compilers with this patch and there were no regressions
in the testsuite.  In addition, during development, I set each of the two
options, and built a copiler with it, and I observed that the expected behavior
for the default of whether prefixed addressing an PC-relative support is
enabled.  Can I check this into the FSF trunk?

2019-11-14  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/linux64.h (TARGET_PREFIXED_ADDR_DEFAULT): Enable
	prefixed addressing by default.
	(TARGET_PCREL_DEFAULT): Enable pc-relative addressing by default.
	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Only
	enable -mprefixed-addr and -mpcrel if the OS tm.h says to enable
	it.
	(ADDRESSING_FUTURE_MASKS): New mask macro.
	(OTHER_FUTURE_MASKS): Use ADDRESSING_FUTURE_MASKS.
	* config/rs6000/rs6000.c (TARGET_PREFIXED_ADDR_DEFAULT): Do not
	enable -mprefixed-addr unless the OS tm.h says to.
	(TARGET_PCREL_DEFAULT): Do not enable -mpcrel unless the OS tm.h
	says to.
	(rs6000_option_override_internal): Do not enable -mprefixed-addr
	or -mpcrel unless the OS tm.h says to enable it.  Add more checks
	for -mcpu=future.

Comments

Segher Boessenkool Nov. 26, 2019, 11:34 p.m. UTC | #1 
On Thu, Nov 14, 2019 at 06:14:47PM -0500, Michael Meissner wrote:
> 	* config/rs6000/linux64.h (TARGET_PREFIXED_ADDR_DEFAULT): Enable
> 	prefixed addressing by default.
> 	(TARGET_PCREL_DEFAULT): Enable pc-relative addressing by default.
> 	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Only
> 	enable -mprefixed-addr and -mpcrel if the OS tm.h says to enable
> 	it.
> 	(ADDRESSING_FUTURE_MASKS): New mask macro.
> 	(OTHER_FUTURE_MASKS): Use ADDRESSING_FUTURE_MASKS.
> 	* config/rs6000/rs6000.c (TARGET_PREFIXED_ADDR_DEFAULT): Do not
> 	enable -mprefixed-addr unless the OS tm.h says to.
> 	(TARGET_PCREL_DEFAULT): Do not enable -mpcrel unless the OS tm.h
> 	says to.
> 	(rs6000_option_override_internal): Do not enable -mprefixed-addr
> 	or -mpcrel unless the OS tm.h says to enable it.  Add more checks
> 	for -mcpu=future.

> +/* Support for a future processor's features.  The prefixed and pc-relative
> +   addressing bits are not added here.  Instead, rs6000.c adds them if the OS
> +   tm.h says that it supports the addressing modes.  */

This comment could be a lot clearer.  It should just say it is about
ADRESSING_FUTURE_MASKS, and not mention rs6000.c at all.

>  #define ISA_FUTURE_MASKS_SERVER	(ISA_3_0_MASKS_SERVER			\
> -				 | OPTION_MASK_FUTURE			\
> +				 | OPTION_MASK_FUTURE)
> +
> +/* Addressing related flags on a future processor.  These flags are broken out
> +   because not all targets will support either pc-relative addressing, or even
> +   prefixed addressing, and we want to clear all of the addressing bits
> +   on targets that cannot support prefixed/pcrel addressing.  */
> +#define ADDRESSING_FUTURE_MASKS	(OPTION_MASK_PCREL			\
>  				 | OPTION_MASK_PREFIXED_ADDR)

> --- gcc/config/rs6000/rs6000.c	(revision 278181)
> +++ gcc/config/rs6000/rs6000.c	(working copy)
> @@ -98,6 +98,16 @@
>  #endif
>  #endif
>  
> +/* Set up the defaults for whether prefixed addressing is used, and if it is
> +   used, whether we want to turn on pc-relative support by default.  */
> +#ifndef TARGET_PREFIXED_ADDR_DEFAULT
> +#define TARGET_PREFIXED_ADDR_DEFAULT	0
> +#endif
> +
> +#ifndef TARGET_PCREL_DEFAULT
> +#define TARGET_PCREL_DEFAULT		0
> +#endif

"DEFAULT" is a bad name for this?  "SUPPORTED"?

We do *not* turn on prefixed or pcrel by default on most linux64 targets
-- most of those are p9 or p8 or p7 or older!  So "SUPPORTED" isn't good
either.  SUPPORTED_BY_OS?

A name like "XXX_DEFAULT" inevitably means we will later get an
"XXX_REALLY_DEFAULT" macro as well.  Not good.

> +  /* Enable prefixed addressing and pc-relative addressing on 64-bit ELF v2
> +     systems if the OS tm.h file says that it is supported and the user did not
> +     explicitly use -mprefixed-addr or -mpcrel.  At the present time, only
> +     64-bit Linux enables this.


> +      /* Enable defaults if desired.  */

This comment does not say anything.  Please say something like "Enable
PCREL and PREFIXED if [...]"

> +      else
> +	{
> +	  if (!explicit_prefixed
> +	      && (TARGET_PREFIXED_ADDR_DEFAULT
> +		  || TARGET_PCREL
> +		  || TARGET_PCREL_DEFAULT))
> +	    rs6000_isa_flags |= OPTION_MASK_PREFIXED_ADDR;
> +
> +	  if (!explicit_pcrel && TARGET_PCREL_DEFAULT
> +	      && TARGET_CMODEL == CMODEL_MEDIUM)
> +	    rs6000_isa_flags |= OPTION_MASK_PCREL;
> +	}
> +    }

... and I don't understand this code.  If you use -mpcrel but you do not
have the medium model, you _do_ get prefixed but you do _not_ get pcrel?
And this all quietly?


Segher
diff mbox series

Patch

Index: gcc/config/rs6000/linux64.h
===================================================================
--- gcc/config/rs6000/linux64.h	(revision 278173)
+++ gcc/config/rs6000/linux64.h	(working copy)
@@ -640,3 +640,11 @@  extern int dot_symbols;
    enabling the __float128 keyword.  */
 #undef	TARGET_FLOAT128_ENABLE_TYPE
 #define TARGET_FLOAT128_ENABLE_TYPE 1
+
+/* Enable support for pc-relative and numeric prefixed addressing on the
+   'future' system.  */
+#undef  TARGET_PREFIXED_ADDR_DEFAULT
+#define TARGET_PREFIXED_ADDR_DEFAULT	1
+
+#undef  TARGET_PCREL_DEFAULT
+#define TARGET_PCREL_DEFAULT		1
Index: gcc/config/rs6000/rs6000-cpus.def
===================================================================
--- gcc/config/rs6000/rs6000-cpus.def	(revision 278173)
+++ gcc/config/rs6000/rs6000-cpus.def	(working copy)
@@ -75,15 +75,21 @@ 
 				 | OPTION_MASK_P8_VECTOR		\
 				 | OPTION_MASK_P9_VECTOR)
 
-/* Support for a future processor's features.  Do not enable -mpcrel until it
-   is fully functional.  */
+/* Support for a future processor's features.  The prefixed and pc-relative
+   addressing bits are not added here.  Instead, rs6000.c adds them if the OS
+   tm.h says that it supports the addressing modes.  */
 #define ISA_FUTURE_MASKS_SERVER	(ISA_3_0_MASKS_SERVER			\
-				 | OPTION_MASK_FUTURE			\
+				 | OPTION_MASK_FUTURE)
+
+/* Addressing related flags on a future processor.  These flags are broken out
+   because not all targets will support either pc-relative addressing, or even
+   prefixed addressing, and we want to clear all of the addressing bits
+   on targets that cannot support prefixed/pcrel addressing.  */
+#define ADDRESSING_FUTURE_MASKS	(OPTION_MASK_PCREL			\
 				 | OPTION_MASK_PREFIXED_ADDR)
 
 /* Flags that need to be turned off if -mno-future.  */
-#define OTHER_FUTURE_MASKS	(OPTION_MASK_PCREL			\
-				 | OPTION_MASK_PREFIXED_ADDR)
+#define OTHER_FUTURE_MASKS	ADDRESSING_FUTURE_MASKS
 
 /* Flags that need to be turned off if -mno-power9-vector.  */
 #define OTHER_P9_VECTOR_MASKS	(OPTION_MASK_FLOAT128_HW		\
Index: gcc/config/rs6000/rs6000.c
===================================================================
--- gcc/config/rs6000/rs6000.c	(revision 278181)
+++ gcc/config/rs6000/rs6000.c	(working copy)
@@ -98,6 +98,16 @@ 
 #endif
 #endif
 
+/* Set up the defaults for whether prefixed addressing is used, and if it is
+   used, whether we want to turn on pc-relative support by default.  */
+#ifndef TARGET_PREFIXED_ADDR_DEFAULT
+#define TARGET_PREFIXED_ADDR_DEFAULT	0
+#endif
+
+#ifndef TARGET_PCREL_DEFAULT
+#define TARGET_PCREL_DEFAULT		0
+#endif
+
 /* Support targetm.vectorize.builtin_mask_for_load.  */
 GTY(()) tree altivec_builtin_mask_for_load;
 
@@ -2535,6 +2545,14 @@  rs6000_debug_reg_global (void)
   if (TARGET_DIRECT_MOVE_128)
     fprintf (stderr, DEBUG_FMT_D, "VSX easy 64-bit mfvsrld element",
 	     (int)VECTOR_ELEMENT_MFVSRLD_64BIT);
+
+  if (TARGET_FUTURE)
+    {
+      fprintf (stderr, DEBUG_FMT_D, "TARGET_PREFIXED_ADDR_DEFAULT",
+	       TARGET_PREFIXED_ADDR_DEFAULT);
+      fprintf (stderr, DEBUG_FMT_D, "TARGET_PCREL_DEFAULT",
+	       TARGET_PCREL_DEFAULT);
+    }
 }
 
 
@@ -4015,26 +4033,6 @@  rs6000_option_override_internal (bool gl
       rs6000_isa_flags &= ~OPTION_MASK_FLOAT128_HW;
     }
 
-  /* -mprefixed-addr (and hence -mpcrel) requires -mcpu=future.  */
-  if (TARGET_PREFIXED_ADDR && !TARGET_FUTURE)
-    {
-      if ((rs6000_isa_flags_explicit & OPTION_MASK_PCREL) != 0)
-	error ("%qs requires %qs", "-mpcrel", "-mcpu=future");
-      else if ((rs6000_isa_flags_explicit & OPTION_MASK_PREFIXED_ADDR) != 0)
-	error ("%qs requires %qs", "-mprefixed-addr", "-mcpu=future");
-
-      rs6000_isa_flags &= ~(OPTION_MASK_PCREL | OPTION_MASK_PREFIXED_ADDR);
-    }
-
-  /* -mpcrel requires prefixed load/store addressing.  */
-  if (TARGET_PCREL && !TARGET_PREFIXED_ADDR)
-    {
-      if ((rs6000_isa_flags_explicit & OPTION_MASK_PCREL) != 0)
-	error ("%qs requires %qs", "-mpcrel", "-mprefixed-addr");
-
-      rs6000_isa_flags &= ~OPTION_MASK_PCREL;
-    }
-
   /* Print the options after updating the defaults.  */
   if (TARGET_DEBUG_REG || TARGET_DEBUG_TARGET)
     rs6000_print_isa_options (stderr, 0, "after defaults", rs6000_isa_flags);
@@ -4166,12 +4164,89 @@  rs6000_option_override_internal (bool gl
   SUB3TARGET_OVERRIDE_OPTIONS;
 #endif
 
-  /* -mpcrel requires -mcmodel=medium, but we can't check TARGET_CMODEL until
-      after the subtarget override options are done.  */
-  if (TARGET_PCREL && TARGET_CMODEL != CMODEL_MEDIUM)
+  /* Enable prefixed addressing and pc-relative addressing on 64-bit ELF v2
+     systems if the OS tm.h file says that it is supported and the user did not
+     explicitly use -mprefixed-addr or -mpcrel.  At the present time, only
+     64-bit Linux enables this.
+
+     Pc-relative support also requires the medium code model.
+
+     However, we can't check for ELFv2 or -mcmodel=medium until after the
+     subtarget macros are run.
+
+     If prefixed addressing is disabled by default, and the user does -mpcrel,
+     don't force them to also specify -mprefixed-addr.  */
+  if (TARGET_FUTURE)
+    {
+      bool explicit_prefixed = ((rs6000_isa_flags_explicit
+				 & OPTION_MASK_PREFIXED_ADDR) != 0);
+      bool explicit_pcrel = ((rs6000_isa_flags_explicit
+			      & OPTION_MASK_PCREL) != 0);
+
+      /* Prefixed addressing requires 64-bit registers.  */
+      if (!TARGET_POWERPC64)
+	{
+	  if (TARGET_PCREL && explicit_pcrel)
+	    error ("%qs requires %qs", "-mpcrel", "-m64");
+
+	  else if (TARGET_PREFIXED_ADDR && explicit_prefixed)
+	    error ("%qs requires %qs", "-mprefixed-addr", "-m64");
+
+	  rs6000_isa_flags &= ~ADDRESSING_FUTURE_MASKS;
+	}
+
+      /* Only ELFv2 currently supports prefixed/pcrel addressing.  */
+      else if (rs6000_current_abi != ABI_ELFv2)
+	{
+	  if (TARGET_PCREL && explicit_pcrel)
+	    error ("%qs requires %qs", "-mpcrel", "-mabi=elfv2");
+
+	  else if (TARGET_PREFIXED_ADDR && explicit_prefixed)
+	    error ("%qs requires %qs", "-mprefixed-addr", "-mabi=elfv2");
+
+	  rs6000_isa_flags &= ~ADDRESSING_FUTURE_MASKS;
+	}
+
+      /* Pc-relative requires the medium code model.  */
+      else if (TARGET_PCREL && TARGET_CMODEL != CMODEL_MEDIUM)
+	{
+	  if ((rs6000_isa_flags_explicit & OPTION_MASK_PCREL) != 0)
+	    error ("%qs requires %qs", "-mpcrel", "-mcmodel=medium");
+
+	  rs6000_isa_flags &= ~OPTION_MASK_PCREL;
+	}
+
+      /* Enable defaults if desired.  */
+      else
+	{
+	  if (!explicit_prefixed
+	      && (TARGET_PREFIXED_ADDR_DEFAULT
+		  || TARGET_PCREL
+		  || TARGET_PCREL_DEFAULT))
+	    rs6000_isa_flags |= OPTION_MASK_PREFIXED_ADDR;
+
+	  if (!explicit_pcrel && TARGET_PCREL_DEFAULT
+	      && TARGET_CMODEL == CMODEL_MEDIUM)
+	    rs6000_isa_flags |= OPTION_MASK_PCREL;
+	}
+    }
+
+  /* -mprefixed-addr (and hence -mpcrel) requires -mcpu=future.  */
+  if (TARGET_PREFIXED_ADDR && !TARGET_FUTURE)
     {
       if ((rs6000_isa_flags_explicit & OPTION_MASK_PCREL) != 0)
-	error ("%qs requires %qs", "-mpcrel", "-mcmodel=medium");
+	error ("%qs requires %qs", "-mpcrel", "-mcpu=future");
+      else if ((rs6000_isa_flags_explicit & OPTION_MASK_PREFIXED_ADDR) != 0)
+	error ("%qs requires %qs", "-mprefixed-addr", "-mcpu=future");
+
+      rs6000_isa_flags &= ~(OPTION_MASK_PCREL | OPTION_MASK_PREFIXED_ADDR);
+    }
+
+  /* -mpcrel requires prefixed load/store addressing.  */
+  if (TARGET_PCREL && !TARGET_PREFIXED_ADDR)
+    {
+      if ((rs6000_isa_flags_explicit & OPTION_MASK_PCREL) != 0)
+	error ("%qs requires %qs", "-mpcrel", "-mprefixed-addr");
 
       rs6000_isa_flags &= ~OPTION_MASK_PCREL;
     }