| Message ID | 20191121102324.35225-9-jerry.huang@nxp.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | new board ls1028ardb introduced | expand |
On Thu, 21 Nov 2019 18:23:22 +0800 Changming Huang <jerry.huang@nxp.com> wrote: > From: Jerry Huang <jerry.huang@nxp.com> > > Because GPIO is used as interrupt for eNETC PHY and Micro-bus, > IIC5_PMUX and CLK_OUT_PMUX are enabled for GPIO. > > Signed-off-by: Jerry Huang <jerry.huang@nxp.com> What is the upstream status of those patches? Will NXP merge them in the rcw project, and will make them available as part of a future RCW release ? Thanks, Thomas
Best Regards Jerry Huang > -----Original Message----- > From: Thomas Petazzoni <thomas.petazzoni@bootlin.com> > Sent: Tuesday, November 26, 2019 6:14 AM > To: Jerry Huang <jerry.huang@nxp.com> > Cc: buildroot@busybox.net; michael@walle.cc; matthew.weber@collins.com; > geomatsi@gmail.com > Subject: [EXT] Re: [Buildroot] [PATCH v2 08/10] > package/freescale-qoriq/fsl-qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX > for GPIO > > Caution: EXT Email > > On Thu, 21 Nov 2019 18:23:22 +0800 > Changming Huang <jerry.huang@nxp.com> wrote: > > > From: Jerry Huang <jerry.huang@nxp.com> > > > > Because GPIO is used as interrupt for eNETC PHY and Micro-bus, > > IIC5_PMUX and CLK_OUT_PMUX are enabled for GPIO. > > > > Signed-off-by: Jerry Huang <jerry.huang@nxp.com> > > What is the upstream status of those patches? Will NXP merge them in the rcw > project, and will make them available as part of a future RCW release ? These two patches are for SD and eMMC boot, which are not pushed to upsteam. If I use xSPI boot, the RCW setting is correct without these two patches. As you mentioned in the reply of patch 10/10, if just one defconfig is pushed to buildroot, I can remove these two patches. > Thanks, > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbootlin.c > om&data=02%7C01%7Cjerry.huang%40nxp.com%7C10089319800b42973 > 24908d771f4bd40%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637 > 103168375059339&sdata=j0xbOhtQRtJfFqW%2BefA1mhEvCczUGIdbk0M > COPIzg0k%3D&reserved=0
diff --git a/package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch b/package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch new file mode 100644 index 0000000000..21c6c84cbd --- /dev/null +++ b/package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch @@ -0,0 +1,42 @@ +From 33b403cee1fa215927bc65dc14baf35a2fdbe7b3 Mon Sep 17 00:00:00 2001 +From: Jerry Huang <jerry.huang@nxp.com> +Date: Thu, 19 Sep 2019 12:12:20 +0800 +Subject: [PATCH 1/2] ls1028ardb: Enable IIC5_PMUX for GPIO function + +Set IIC5_PMUX = 1 to enable GPIO function. + +Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com> +Signed-off-by: Jerry Huang <jerry.huang@nxp.com> +--- + ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +- + ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw +index b46ea2e..5466a63 100644 +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw +@@ -26,7 +26,7 @@ SYSCLK_FREQ=600 + IIC2_PMUX=6 + IIC3_PMUX=2 + IIC4_PMUX=2 +-IIC5_PMUX=2 ++IIC5_PMUX=1 + IIC6_PMUX=2 + CLK_OUT_PMUX=2 + EC1_SAI4_5_PMUX=5 +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw +index 04e2208..1908d8c 100644 +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw +@@ -26,7 +26,7 @@ SYSCLK_FREQ=600 + IIC2_PMUX=6 + IIC3_PMUX=2 + IIC4_PMUX=2 +-IIC5_PMUX=2 ++IIC5_PMUX=1 + IIC6_PMUX=3 + CLK_OUT_PMUX=2 + EC1_SAI4_5_PMUX=5 +-- +2.17.1 diff --git a/package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch b/package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch new file mode 100644 index 0000000000..4f00541d69 --- /dev/null +++ b/package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch @@ -0,0 +1,40 @@ +From 4a3c9ea5d0c7bf8eec8cb6276d6f4d940f3946db Mon Sep 17 00:00:00 2001 +From: Jerry Huang <jerry.huang@nxp.com> +Date: Thu, 19 Sep 2019 12:13:48 +0800 +Subject: [PATCH 2/2] ls1028ardb/rcw: Enable CLK_OUT_PMUX for GPIO function + +Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com> +Signed-off-by: Jerry Huang <jerry.huang@nxp.com> +--- + ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +- + ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw +index 5466a63..a5ed4d4 100644 +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw +@@ -28,7 +28,7 @@ IIC3_PMUX=2 + IIC4_PMUX=2 + IIC5_PMUX=1 + IIC6_PMUX=2 +-CLK_OUT_PMUX=2 ++CLK_OUT_PMUX=1 + EC1_SAI4_5_PMUX=5 + EC1_SAI3_6_PMUX=5 + USB3_CLK_FSEL=39 +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw +index 1908d8c..c930b83 100644 +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw +@@ -28,7 +28,7 @@ IIC3_PMUX=2 + IIC4_PMUX=2 + IIC5_PMUX=1 + IIC6_PMUX=3 +-CLK_OUT_PMUX=2 ++CLK_OUT_PMUX=1 + EC1_SAI4_5_PMUX=5 + EC1_SAI3_6_PMUX=5 + USB3_CLK_FSEL=39 +-- +2.17.1