Series |
x86: Add initial support for apollolake
|
expand
-
[U-Boot,v3,000/108] x86: Add initial support for apollolake
-
[U-Boot,v3,001/108] binman: Correct symbol calculation with non-zero image base
-
[U-Boot,v3,002/108] binman: Add support for Intel FSP-S
-
[U-Boot,v3,003/108] binman: Add support for Intel FSP-T
-
[U-Boot,v3,004/108] binman: Fix up comment in intel-fsp-m
-
[U-Boot,v3,005/108] binman: Add a library to access binman entries
-
[U-Boot,v3,006/108] dm: gpio: Allow control of GPIO uclass in SPL
-
[U-Boot,v3,007/108] dm: core: Fix offset_to_ofnode() with invalid offset
-
[U-Boot,v3,008/108] dm: pci: Delay auto-config until after relocation
-
[U-Boot,v3,009/108] dm: pci: Move pci_get_devfn() into a common file
-
[U-Boot,v3,010/108] net: Move the checksum functions to lib/
-
[U-Boot,v3,011/108] i2c: Tidy up designware PCI support
-
[U-Boot,v3,012/108] spl: Correct priority selection for image loaders
-
[U-Boot,v3,013/108] x86: spi: Add helper functions for Intel Fast SPI
-
[U-Boot,v3,014/108] spi: Add support for memory-mapped flash
-
[U-Boot,v3,015/108] dm: doc: Correct of-platdata driver name
-
[U-Boot,v3,016/108] fdt: Show the preprocessed .dts file on error
-
[U-Boot,v3,017/108] RFC: sandbox: net: Suppress the MAC-address warnings
-
[U-Boot,v3,018/108] Revert "RFC: sandbox: net: Suppress the MAC-address warnings"
-
[U-Boot,v3,019/108] spl: Add a size check for TPL
-
[U-Boot,v3,020/108] sandbox: pci: Create a new sandbox_pci_read_bar() function
-
[U-Boot,v3,021/108] x86: timer: Set up the timer in timer_early_get_count()
-
[U-Boot,v3,022/108] x86: timer: Use a separate flag for whether timer is inited
-
[U-Boot,v3,023/108] x86: timer: Allow a timer base of 0
-
[U-Boot,v3,024/108] x86: spl: Support init of a PUNIT
-
[U-Boot,v3,025/108] x86: tpl: Add a fake PCI bus
-
[U-Boot,v3,026/108] x86: timer: Reduce timer code size in TPL on Intel CPUs
-
[U-Boot,v3,027/108] x86: Drop unnecessary cpu code for TPL
-
[U-Boot,v3,028/108] x86: Drop unnecessary interrupt code for TPL
-
[U-Boot,v3,029/108] x86: Add a CPU init function for TPL
-
[U-Boot,v3,030/108] x86: Move CPU init to before spl_init()
-
[U-Boot,v3,031/108] x86: Don't print CPU info in TPL
-
[U-Boot,v3,032/108] x86: Quieten TPL's jump_to_image_no_args()
-
[U-Boot,v3,033/108] x86: power: Add an ACPI PMC uclass
-
[U-Boot,v3,034/108] x86: sandbox: Add a PMC emulator and test
-
[U-Boot,v3,035/108] x86: power: Add a 'pmc' command
-
[U-Boot,v3,036/108] pci: Add support for p2sb uclass
-
[U-Boot,v3,037/108] sandbox: Add PCI driver and test for p2sb
-
[U-Boot,v3,038/108] x86: Move UCLASS_IRQ into a separate file
-
[U-Boot,v3,039/108] sandbox: Add a test for IRQ
-
[U-Boot,v3,040/108] x86: Define the SPL image start
-
[U-Boot,v3,041/108] x86: Reduce mrccache record alignment size
-
[U-Boot,v3,042/108] x86: Correct mrccache find_next_mrc_cache() calculation
-
[U-Boot,v3,043/108] x86: Adjust mrccache_get_region() to use livetree
-
[U-Boot,v3,044/108] x86: Adjust mrccache_get_region() to support get_mmap()
-
[U-Boot,v3,045/108] x86: Add a new global_data member for the cache record
-
[U-Boot,v3,046/108] x86: Tidy up error handling in mrccache_save()
-
[U-Boot,v3,047/108] x86: Update mrccache to support multiple caches
-
[U-Boot,v3,048/108] x86: Add mrccache support for a 'variable' cache
-
[U-Boot,v3,049/108] x86: Move fsp_prepare_mrc_cache() to fsp1 directory
-
[U-Boot,v3,050/108] x86: Set the DRAM banks to reflect real location
-
[U-Boot,v3,051/108] x86: Set up the MTRR for SDRAM
-
[U-Boot,v3,052/108] x86: Don't imply libfdt or SPI flash in TPL
-
[U-Boot,v3,053/108] x86: Allow removal of standard PCH drivers
-
[U-Boot,v3,054/108] x86: Allow interrupt to happen once
-
[U-Boot,v3,055/108] x86: fsp: Make graphics support common to FSP1/2
-
[U-Boot,v3,056/108] x86: fsp: Correct wrong header inlude in fsp_support.c
-
[U-Boot,v3,057/108] x86: fsp: Add FSP2 base support
-
[U-Boot,v3,058/108] x86: fsp: Set up an MTRR for the graphics frame buffer
-
[U-Boot,v3,059/108] x86: fsp: Add a new arch_fsp_init_r() hook
-
[U-Boot,v3,060/108] x86: fsp: Allow remembering the location of FSP-S
-
[U-Boot,v3,061/108] x86: fsp: Make the notify API call common
-
[U-Boot,v3,062/108] x86: Don't include the BIOS emulator in TPL
-
[U-Boot,v3,063/108] x86: Add an option to include a FIT
-
[U-Boot,v3,064/108] x86: Add support for newer CAR schemes
-
[U-Boot,v3,065/108] x86: Disable microcode section for FSP2
-
[U-Boot,v3,066/108] x86: Update the fsp command for FSP2
-
[U-Boot,v3,067/108] x86: Update .dtsi file for FSP2
-
[U-Boot,v3,068/108] x86: Add an option to control the position of U-Boot
-
[U-Boot,v3,069/108] x86: Add an option to control the position of SPL
-
[U-Boot,v3,070/108] x86: Add an fdtmap and image-header
-
[U-Boot,v3,071/108] x86: Don't repeat microcode in U-Boot if not needed
-
[U-Boot,v3,072/108] x86: Separate out U-Boot and device tree in ROM image
-
[U-Boot,v3,073/108] x86: Make MSR_PKG_POWER_SKU common
-
[U-Boot,v3,074/108] spi: Correct operations check in dm_spi_xfer()
-
[U-Boot,v3,075/108] x86: spi: Don't enable SPI_FLASH_BAR by default
-
[U-Boot,v3,076/108] spi: ich: Move init function just above probe()
-
[U-Boot,v3,077/108] spi: ich: Move the protection/lockdown code into a function
-
[U-Boot,v3,078/108] spi: ich: Convert to livetree
-
[U-Boot,v3,079/108] spi: ich: Fix header order
-
[U-Boot,v3,080/108] spi: ich: Various small tidy-ups
-
[U-Boot,v3,081/108] spi: ich: Add mmio_base to struct ich_spi_platdata
-
[U-Boot,v3,082/108] spi: ich: Correct max-size bug in ich_spi_adjust_size()
-
[U-Boot,v3,083/108] spi: ich: Support of-platdata for fast-spi
-
[U-Boot,v3,084/108] spi: ich: Support hardware sequencing
-
[U-Boot,v3,085/108] spi: ich: Add support for get_mmap() method
-
[U-Boot,v3,086/108] spi: ich: Add TPL support
-
[U-Boot,v3,087/108] spi: ich: Add Apollolake support
-
[U-Boot,v3,088/108] mtd: spi: Export spi_flash_std_probe()
-
[U-Boot,v3,089/108] x86: apollolake: Add basic IO addresses
-
[U-Boot,v3,090/108] x86: apollolake: Add PMC driver
-
[U-Boot,v3,091/108] x86: apollolake: Add low-power subsystem (lpss) support
-
[U-Boot,v3,092/108] x86: apollolake: Add UART driver
-
[U-Boot,v3,093/108] x86: apollolake: Add GPIO driver
-
[U-Boot,v3,094/108] i2c: designware: Add apollolake support
-
[U-Boot,v3,095/108] x86: apollolake: Add systemagent driver
-
[U-Boot,v3,096/108] x86: apollolake: Add hostbridge driver
-
[U-Boot,v3,097/108] x86: apollolake: Add ITSS driver
-
[U-Boot,v3,098/108] x86: apollolake: Add LPC driver
-
[U-Boot,v3,099/108] x86: apollolake: Add PCH driver
-
[U-Boot,v3,100/108] x86: apollolake: Add PUNIT driver
-
[U-Boot,v3,101/108] x86: apollolake: Add SPL loaders
-
[U-Boot,v3,102/108] x86: apollolake: Add a CPU driver
-
[U-Boot,v3,103/108] x86: apollolake: Add SPL/TPL init
-
[U-Boot,v3,104/108] x86: apollolake: Add P2SB driver
-
[U-Boot,v3,105/108] x86: apollolake: Add Kconfig and Makefile
-
[U-Boot,v3,106/108] x86: apollolake: Add FSP structures
-
[U-Boot,v3,107/108] x86: apollolake: Add FSP support
-
[U-Boot,v3,108/108] x86: Add chromebook_coral
|