diff mbox series

[v2] pinctrl: baytrail: Really serialize all register accesses

Message ID 20191119154641.202139-1-hdegoede@redhat.com
State New
Headers show
Series [v2] pinctrl: baytrail: Really serialize all register accesses | expand

Commit Message

Hans de Goede Nov. 19, 2019, 3:46 p.m. UTC 
Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
added a spinlock around all register accesses because:

"There is a hardware issue in Intel Baytrail where concurrent GPIO register
 access might result reads of 0xffffffff and writes might get dropped
 completely."

Testing has shown that this does not catch all cases, there are still
2 problems remaining

1) The original fix uses a spinlock per byt_gpio device / struct,
additional testing has shown that this is not sufficient concurent
accesses to 2 different GPIO banks also suffer from the same problem.

This commit fixes this by moving to a single global lock.

2) The original fix did not add a lock around the register accesses in
the suspend/resume handling.

Since pinctrl-baytrail.c is using normal suspend/resume handlers,
interrupts are still enabled during suspend/resume handling. Nothing
should be using the GPIOs when they are being taken down, _but_ the
GPIOs themselves may still cause interrupts, which are likely to
use (read) the triggering GPIO. So we need to protect against
concurrent GPIO register accesses in the suspend/resume handlers too.

This commit fixes this by adding the missing spin_lock / unlock calls.

The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
confused after a suspend resume. The DSDT for this device has a bug
in its _LID method which reprograms the home and power button trigger-
flags requesting both high and low _level_ interrupts so the IRQs for
these 2 GPIOs continuously fire. This combined with the saving of
registers during suspend, triggers concurrent GPIO register accesses
resulting in saving 0xffffffff as pconf0 value during suspend and then
when restoring this on resume the pinmux settings get all messed up,
resulting in various I2C busses being stuck, the wifi no longer working
and often the tablet simply not coming out of suspend at all.

Cc: stable@vger.kernel.org
Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Rename byt_gpio_lock to byt_lock
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 81 +++++++++++++-----------
 1 file changed, 44 insertions(+), 37 deletions(-)

Comments

Mika Westerberg Nov. 19, 2019, 4:09 p.m. UTC | #1 
On Tue, Nov 19, 2019 at 04:46:41PM +0100, Hans de Goede wrote:
> Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
> added a spinlock around all register accesses because:
> 
> "There is a hardware issue in Intel Baytrail where concurrent GPIO register
>  access might result reads of 0xffffffff and writes might get dropped
>  completely."
> 
> Testing has shown that this does not catch all cases, there are still
> 2 problems remaining
> 
> 1) The original fix uses a spinlock per byt_gpio device / struct,
> additional testing has shown that this is not sufficient concurent
> accesses to 2 different GPIO banks also suffer from the same problem.
> 
> This commit fixes this by moving to a single global lock.
> 
> 2) The original fix did not add a lock around the register accesses in
> the suspend/resume handling.
> 
> Since pinctrl-baytrail.c is using normal suspend/resume handlers,
> interrupts are still enabled during suspend/resume handling. Nothing
> should be using the GPIOs when they are being taken down, _but_ the
> GPIOs themselves may still cause interrupts, which are likely to
> use (read) the triggering GPIO. So we need to protect against
> concurrent GPIO register accesses in the suspend/resume handlers too.
> 
> This commit fixes this by adding the missing spin_lock / unlock calls.
> 
> The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
> confused after a suspend resume. The DSDT for this device has a bug
> in its _LID method which reprograms the home and power button trigger-
> flags requesting both high and low _level_ interrupts so the IRQs for
> these 2 GPIOs continuously fire. This combined with the saving of
> registers during suspend, triggers concurrent GPIO register accesses
> resulting in saving 0xffffffff as pconf0 value during suspend and then
> when restoring this on resume the pinmux settings get all messed up,
> resulting in various I2C busses being stuck, the wifi no longer working
> and often the tablet simply not coming out of suspend at all.
> 
> Cc: stable@vger.kernel.org
> Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Andy Shevchenko Nov. 20, 2019, 5:37 p.m. UTC | #2 
On Tue, Nov 19, 2019 at 06:09:17PM +0200, Mika Westerberg wrote:
> On Tue, Nov 19, 2019 at 04:46:41PM +0100, Hans de Goede wrote:
> > Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
> > added a spinlock around all register accesses because:
> > 
> > "There is a hardware issue in Intel Baytrail where concurrent GPIO register
> >  access might result reads of 0xffffffff and writes might get dropped
> >  completely."
> > 
> > Testing has shown that this does not catch all cases, there are still
> > 2 problems remaining
> > 
> > 1) The original fix uses a spinlock per byt_gpio device / struct,
> > additional testing has shown that this is not sufficient concurent
> > accesses to 2 different GPIO banks also suffer from the same problem.
> > 
> > This commit fixes this by moving to a single global lock.
> > 
> > 2) The original fix did not add a lock around the register accesses in
> > the suspend/resume handling.
> > 
> > Since pinctrl-baytrail.c is using normal suspend/resume handlers,
> > interrupts are still enabled during suspend/resume handling. Nothing
> > should be using the GPIOs when they are being taken down, _but_ the
> > GPIOs themselves may still cause interrupts, which are likely to
> > use (read) the triggering GPIO. So we need to protect against
> > concurrent GPIO register accesses in the suspend/resume handlers too.
> > 
> > This commit fixes this by adding the missing spin_lock / unlock calls.
> > 
> > The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
> > confused after a suspend resume. The DSDT for this device has a bug
> > in its _LID method which reprograms the home and power button trigger-
> > flags requesting both high and low _level_ interrupts so the IRQs for
> > these 2 GPIOs continuously fire. This combined with the saving of
> > registers during suspend, triggers concurrent GPIO register accesses
> > resulting in saving 0xffffffff as pconf0 value during suspend and then
> > when restoring this on resume the pinmux settings get all messed up,
> > resulting in various I2C busses being stuck, the wifi no longer working
> > and often the tablet simply not coming out of suspend at all.
> > 
> > Cc: stable@vger.kernel.org
> > Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
> > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> 
> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Pushed to my review and testing queue, thanks!
diff mbox series

Patch

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index b18336d42252..3a6404b6fd7e 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -111,7 +111,6 @@  struct byt_gpio {
 	struct platform_device *pdev;
 	struct pinctrl_dev *pctl_dev;
 	struct pinctrl_desc pctl_desc;
-	raw_spinlock_t lock;
 	const struct intel_pinctrl_soc_data *soc_data;
 	struct intel_community *communities_copy;
 	struct byt_gpio_pin_context *saved_context;
@@ -550,6 +549,8 @@  static const struct intel_pinctrl_soc_data *byt_soc_data[] = {
 	NULL
 };
 
+static DEFINE_RAW_SPINLOCK(byt_lock);
+
 static struct intel_community *byt_get_community(struct byt_gpio *vg,
 						 unsigned int pin)
 {
@@ -659,7 +660,7 @@  static void byt_set_group_simple_mux(struct byt_gpio *vg,
 	unsigned long flags;
 	int i;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	for (i = 0; i < group.npins; i++) {
 		void __iomem *padcfg0;
@@ -679,7 +680,7 @@  static void byt_set_group_simple_mux(struct byt_gpio *vg,
 		writel(value, padcfg0);
 	}
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static void byt_set_group_mixed_mux(struct byt_gpio *vg,
@@ -689,7 +690,7 @@  static void byt_set_group_mixed_mux(struct byt_gpio *vg,
 	unsigned long flags;
 	int i;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	for (i = 0; i < group.npins; i++) {
 		void __iomem *padcfg0;
@@ -709,7 +710,7 @@  static void byt_set_group_mixed_mux(struct byt_gpio *vg,
 		writel(value, padcfg0);
 	}
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
@@ -750,11 +751,11 @@  static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)
 	unsigned long flags;
 	u32 value;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
 	value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
 	writel(value, reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
@@ -766,7 +767,7 @@  static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
 	u32 value, gpio_mux;
 	unsigned long flags;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	/*
 	 * In most cases, func pin mux 000 means GPIO function.
@@ -788,7 +789,7 @@  static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
 			 "pin %u forcibly re-configured as GPIO\n", offset);
 	}
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	pm_runtime_get(&vg->pdev->dev);
 
@@ -816,7 +817,7 @@  static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 	unsigned long flags;
 	u32 value;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	value = readl(val_reg);
 	value &= ~BYT_DIR_MASK;
@@ -833,7 +834,7 @@  static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 		     "Potential Error: Setting GPIO with direct_irq_en to output");
 	writel(value, val_reg);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return 0;
 }
@@ -902,11 +903,11 @@  static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 	u32 conf, pull, val, debounce;
 	u16 arg = 0;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	conf = readl(conf_reg);
 	pull = conf & BYT_PULL_ASSIGN_MASK;
 	val = readl(val_reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
@@ -933,9 +934,9 @@  static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 		if (!(conf & BYT_DEBOUNCE_EN))
 			return -EINVAL;
 
-		raw_spin_lock_irqsave(&vg->lock, flags);
+		raw_spin_lock_irqsave(&byt_lock, flags);
 		debounce = readl(db_reg);
-		raw_spin_unlock_irqrestore(&vg->lock, flags);
+		raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 		switch (debounce & BYT_DEBOUNCE_PULSE_MASK) {
 		case BYT_DEBOUNCE_PULSE_375US:
@@ -987,7 +988,7 @@  static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 	u32 conf, val, debounce;
 	int i, ret = 0;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	conf = readl(conf_reg);
 	val = readl(val_reg);
@@ -1095,7 +1096,7 @@  static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 	if (!ret)
 		writel(conf, conf_reg);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return ret;
 }
@@ -1120,9 +1121,9 @@  static int byt_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	unsigned long flags;
 	u32 val;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	val = readl(reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return !!(val & BYT_LEVEL);
 }
@@ -1137,13 +1138,13 @@  static void byt_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
 	if (!reg)
 		return;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	old_val = readl(reg);
 	if (value)
 		writel(old_val | BYT_LEVEL, reg);
 	else
 		writel(old_val & ~BYT_LEVEL, reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
@@ -1156,9 +1157,9 @@  static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 	if (!reg)
 		return -EINVAL;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	if (!(value & BYT_OUTPUT_EN))
 		return 0;
@@ -1201,14 +1202,14 @@  static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		const char *label;
 		unsigned int pin;
 
-		raw_spin_lock_irqsave(&vg->lock, flags);
+		raw_spin_lock_irqsave(&byt_lock, flags);
 		pin = vg->soc_data->pins[i].number;
 		reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG);
 		if (!reg) {
 			seq_printf(s,
 				   "Could not retrieve pin %i conf0 reg\n",
 				   pin);
-			raw_spin_unlock_irqrestore(&vg->lock, flags);
+			raw_spin_unlock_irqrestore(&byt_lock, flags);
 			continue;
 		}
 		conf0 = readl(reg);
@@ -1217,11 +1218,11 @@  static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		if (!reg) {
 			seq_printf(s,
 				   "Could not retrieve pin %i val reg\n", pin);
-			raw_spin_unlock_irqrestore(&vg->lock, flags);
+			raw_spin_unlock_irqrestore(&byt_lock, flags);
 			continue;
 		}
 		val = readl(reg);
-		raw_spin_unlock_irqrestore(&vg->lock, flags);
+		raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 		comm = byt_get_community(vg, pin);
 		if (!comm) {
@@ -1305,9 +1306,9 @@  static void byt_irq_ack(struct irq_data *d)
 	if (!reg)
 		return;
 
-	raw_spin_lock(&vg->lock);
+	raw_spin_lock(&byt_lock);
 	writel(BIT(offset % 32), reg);
-	raw_spin_unlock(&vg->lock);
+	raw_spin_unlock(&byt_lock);
 }
 
 static void byt_irq_mask(struct irq_data *d)
@@ -1331,7 +1332,7 @@  static void byt_irq_unmask(struct irq_data *d)
 	if (!reg)
 		return;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
 
 	switch (irqd_get_trigger_type(d)) {
@@ -1354,7 +1355,7 @@  static void byt_irq_unmask(struct irq_data *d)
 
 	writel(value, reg);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_irq_type(struct irq_data *d, unsigned int type)
@@ -1368,7 +1369,7 @@  static int byt_irq_type(struct irq_data *d, unsigned int type)
 	if (!reg || offset >= vg->chip.ngpio)
 		return -EINVAL;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
 
 	WARN(value & BYT_DIRECT_IRQ_EN,
@@ -1390,7 +1391,7 @@  static int byt_irq_type(struct irq_data *d, unsigned int type)
 	else if (type & IRQ_TYPE_LEVEL_MASK)
 		irq_set_handler_locked(d, handle_level_irq);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return 0;
 }
@@ -1417,9 +1418,9 @@  static void byt_gpio_irq_handler(struct irq_desc *desc)
 			continue;
 		}
 
-		raw_spin_lock(&vg->lock);
+		raw_spin_lock(&byt_lock);
 		pending = readl(reg);
-		raw_spin_unlock(&vg->lock);
+		raw_spin_unlock(&byt_lock);
 		for_each_set_bit(pin, &pending, 32) {
 			virq = irq_find_mapping(vg->chip.irq.domain, base + pin);
 			generic_handle_irq(virq);
@@ -1646,8 +1647,6 @@  static int byt_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(vg->pctl_dev);
 	}
 
-	raw_spin_lock_init(&vg->lock);
-
 	ret = byt_gpio_probe(vg);
 	if (ret)
 		return ret;
@@ -1662,8 +1661,11 @@  static int byt_pinctrl_probe(struct platform_device *pdev)
 static int byt_gpio_suspend(struct device *dev)
 {
 	struct byt_gpio *vg = dev_get_drvdata(dev);
+	unsigned long flags;
 	int i;
 
+	raw_spin_lock_irqsave(&byt_lock, flags);
+
 	for (i = 0; i < vg->soc_data->npins; i++) {
 		void __iomem *reg;
 		u32 value;
@@ -1684,14 +1686,18 @@  static int byt_gpio_suspend(struct device *dev)
 		vg->saved_context[i].val = value;
 	}
 
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 	return 0;
 }
 
 static int byt_gpio_resume(struct device *dev)
 {
 	struct byt_gpio *vg = dev_get_drvdata(dev);
+	unsigned long flags;
 	int i;
 
+	raw_spin_lock_irqsave(&byt_lock, flags);
+
 	for (i = 0; i < vg->soc_data->npins; i++) {
 		void __iomem *reg;
 		u32 value;
@@ -1729,6 +1735,7 @@  static int byt_gpio_resume(struct device *dev)
 		}
 	}
 
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 	return 0;
 }
 #endif