diff mbox series

[5/5] ARM: config: multi_v5: ASPEED SDHCI, SGPIO

Message ID 20191112062857.32638-6-joel@jms.id.au
State Not Applicable, archived
Headers show
Series ARM: config: ASPEED updates for 5.5 | expand

Commit Message

Joel Stanley Nov. 12, 2019, 6:28 a.m. UTC 
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
can run on those boards.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/configs/multi_v5_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Cédric Le Goater Nov. 12, 2019, 8:29 a.m. UTC | #1 
On 12/11/2019 07:28, Joel Stanley wrote:
> Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
> can run on those boards.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Cédric Le Goater <clg@kaod.org>

> ---
>  arch/arm/configs/multi_v5_defconfig | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
> index bd018873e47a..56315e1f81ff 100644
> --- a/arch/arm/configs/multi_v5_defconfig
> +++ b/arch/arm/configs/multi_v5_defconfig
> @@ -165,6 +165,7 @@ CONFIG_SPI_ATMEL=y
>  CONFIG_SPI_IMX=y
>  CONFIG_SPI_ORION=y
>  CONFIG_GPIO_ASPEED=m
> +CONFIG_GPIO_ASPEED_SGPIO=y
>  CONFIG_POWER_RESET=y
>  CONFIG_POWER_RESET_GPIO=y
>  CONFIG_POWER_RESET_QNAP=y
> @@ -241,6 +242,9 @@ CONFIG_USB_ASPEED_VHUB=m
>  CONFIG_USB_CONFIGFS=m
>  CONFIG_MMC=y
>  CONFIG_SDIO_UART=y
> +CONFIG_MMC_SDHCI=m
> +CONFIG_MMC_SDHCI_PLTFM=m
> +CONFIG_MMC_SDHCI_OF_ASPEED=m
>  CONFIG_MMC_ATMELMCI=y
>  CONFIG_MMC_MVSDIO=y
>  CONFIG_NEW_LEDS=y
>
diff mbox series

Patch

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index bd018873e47a..56315e1f81ff 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -165,6 +165,7 @@  CONFIG_SPI_ATMEL=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_ASPEED=m
+CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
@@ -241,6 +242,9 @@  CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=y
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_SDHCI_OF_ASPEED=m
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_NEW_LEDS=y