diff mbox series

[v3,2/2] pinctrl: bcm: nsp: implement get_direction

Message ID 20191104001819.2300-3-chris.packham@alliedtelesis.co.nz
State New
Headers show
Series pinctrl: bcm: nsp: gpio improvements | expand

Commit Message

Chris Packham Nov. 4, 2019, 12:18 a.m. UTC
The get_direction api is strongly recommended to be implemented. In fact
if it is not implemented gpio-hogs will not get the correct direction.
Add an implementation of get_direction for the nsp-gpio driver.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---

Notes:
    Changes in v3:
    - add revew from Florian
    Changes in v2:
    - New

 drivers/pinctrl/bcm/pinctrl-nsp-gpio.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Linus Walleij Nov. 4, 2019, 3:20 p.m. UTC | #1
On Mon, Nov 4, 2019 at 1:18 AM Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:

> The get_direction api is strongly recommended to be implemented. In fact
> if it is not implemented gpio-hogs will not get the correct direction.
> Add an implementation of get_direction for the nsp-gpio driver.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>
> Notes:
>     Changes in v3:
>     - add revew from Florian
>     Changes in v2:
>     - New

Patch applied.

Yours,
Linus Walleij
Linus Walleij Nov. 4, 2019, 3:24 p.m. UTC | #2
On Mon, Nov 4, 2019 at 1:18 AM Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:

> The get_direction api is strongly recommended to be implemented. In fact
> if it is not implemented gpio-hogs will not get the correct direction.
> Add an implementation of get_direction for the nsp-gpio driver.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

BTW I think it looks like this the GPIO part of this driver can be
converted to use GPIO_GENERIC. Compare to other
drivers such as drivers/gpio/gpio-ftgpio010.c.

It's a fun way to cut down lines if you have time to check
and test!

Yours,
Linus Walleij
Chris Packham Nov. 4, 2019, 7:58 p.m. UTC | #3
On Mon, 2019-11-04 at 16:24 +0100, Linus Walleij wrote:
> On Mon, Nov 4, 2019 at 1:18 AM Chris Packham
> <chris.packham@alliedtelesis.co.nz> wrote:
> 
> > The get_direction api is strongly recommended to be implemented. In fact
> > if it is not implemented gpio-hogs will not get the correct direction.
> > Add an implementation of get_direction for the nsp-gpio driver.
> > 
> > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> 
> BTW I think it looks like this the GPIO part of this driver can be
> converted to use GPIO_GENERIC. Compare to other
> drivers such as drivers/gpio/gpio-ftgpio010.c.
> 
> It's a fun way to cut down lines if you have time to check
> and test!
> 

I'll see if I can fit it in. Got another problem I'm chasing on the
same platform.
diff mbox series

Patch

diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
index 45ae29b22548..bed0124388c0 100644
--- a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
@@ -297,6 +297,19 @@  static int nsp_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
 	return 0;
 }
 
+static int nsp_gpio_get_direction(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+	int val;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	val = nsp_get_bit(chip, REG, NSP_GPIO_OUT_EN, gpio);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return !val;
+}
+
 static void nsp_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
 {
 	struct nsp_gpio *chip = gpiochip_get_data(gc);
@@ -641,6 +654,7 @@  static int nsp_gpio_probe(struct platform_device *pdev)
 	gc->free = gpiochip_generic_free;
 	gc->direction_input = nsp_gpio_direction_input;
 	gc->direction_output = nsp_gpio_direction_output;
+	gc->get_direction = nsp_gpio_get_direction;
 	gc->set = nsp_gpio_set;
 	gc->get = nsp_gpio_get;