Message ID | 1571387933-23397-1-git-send-email-yoshihiro.shimoda.uh@renesas.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | "total: 0 errors, 2 warnings, 106 lines checked" |
On Fri, Oct 18, 2019 at 05:38:53PM +0900, Yoshihiro Shimoda wrote: > Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation > to json-schema. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > --- > .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 -------------- > .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 106 +++++++++++++++++++++ > 2 files changed, 106 insertions(+), 70 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > new file mode 100644 > index 00000000..0f109c2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas R-Car generation 3 USB 2.0 PHY > + > +maintainers: > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > + > +properties: > + compatible: > + oneOf: This: > + - items: > + - enum: > + - renesas,usb2-phy-r8a77470 # RZ/G1C You can simplify to just: - const: renesas,usb2-phy-r8a77470 # RZ/G1C > + - items: > + - enum: > + - renesas,usb2-phy-r7s9210 # RZ/A2 > + - renesas,usb2-phy-r8a774a1 # RZ/G2M > + - renesas,usb2-phy-r8a774b1 # RZ/G2N > + - renesas,usb2-phy-r8a774c0 # RZ/G2E > + - renesas,usb2-phy-r8a7795 # R-Car H3 > + - renesas,usb2-phy-r8a7796 # R-Car M3-W > + - renesas,usb2-phy-r8a77965 # R-Car M3-N > + - renesas,usb2-phy-r8a77990 # R-Car E3 > + - renesas,usb2-phy-r8a77995 # R-Car D3 > + - const: renesas,rcar-gen3-usb2-phy > + > + reg: > + # base address and length of the registers block for the PHY. > + maxItems: 1 > + > + clocks: > + # clock phandle and specifier pair(s). > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + # for RZ/A2 > + minItems: 1 > + maxItems: 2 > + items: > + - const: fck > + - const: usb_x1 > + > + '#phy-cells': > + # see phy-bindings.txt in the same directory Drop this so we don't have to fix later. > + enum: [0, 1] # and 0 is deprecated. > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + resets: > + minItems: 1 > + maxItems: 2 Needs 'items' to define each entry. > + > + vbus-supply: > + $ref: /schemas/types.yaml#/definitions/phandle Can drop this, *-supply already has a type. > + description: | > + Phandle to a regulator that provides power to the VBUS. This regulator > + will be managed during the PHY power on/off sequence. > + > + renesas,no-otg-pins: > + $ref: /schemas/types.yaml#/definitions/flag > + description: | > + specify when a board does not provide proper otg pins. > + > + dr_mode: > + $ref: /schemas/types.yaml#/definitions/string I think we already have a common definition, so just 'true' is enough. > + description: | > + indicates the working mode for the PHY. Can be "host", "peripheral", or > + "otg". Should be set if otg controller is not used. > + > +required: > + - compatible > + - reg > + - clocks > + - '#phy-cells' > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/r8a7795-sysc.h> > + > + usb-phy@ee080200 { > + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; > + reg = <0 0xee080200 0 0x700>; > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 703>; > + #phy-cells = <1>; > + }; > + > + usb-phy@ee0a0200 { > + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; > + reg = <0 0xee0a0200 0 0x700>; > + clocks = <&cpg CPG_MOD 702>; > + #phy-cells = <1>; > + }; > -- > 2.7.4 >
Hi Rob, Thank you for your review! > From: Rob Herring, Sent: Tuesday, October 29, 2019 10:57 AM > > On Fri, Oct 18, 2019 at 05:38:53PM +0900, Yoshihiro Shimoda wrote: > > Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation > > to json-schema. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > --- > > .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 -------------- > > .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 106 +++++++++++++++++++++ > > 2 files changed, 106 insertions(+), 70 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > > diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > new file mode 100644 > > index 00000000..0f109c2 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > @@ -0,0 +1,106 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Renesas R-Car generation 3 USB 2.0 PHY > > + > > +maintainers: > > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > + > > +properties: > > + compatible: > > + oneOf: > > This: What does the "This:" mean? If I replaced the "oneOf:" with "This:", the following error happens when "make dt_binding_check": SCHEMA Documentation/devicetree/bindings/processed-schema.yaml warning: no schema found in file: Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml [snip]/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml: ignoring, error in schema 'compatible' Documentation/devicetree/bindings/Makefile:33: recipe for target 'Documentation/devicetree/bindings/processed-schema.yaml' failed make[1]: *** [Documentation/devicetree/bindings/processed-schema.yaml] Error 255 Makefile:1263: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2 > > + - items: > > + - enum: > > + - renesas,usb2-phy-r8a77470 # RZ/G1C > > You can simplify to just: > > - const: renesas,usb2-phy-r8a77470 # RZ/G1C I'll fix it. > > + - items: > > + - enum: > > + - renesas,usb2-phy-r7s9210 # RZ/A2 > > + - renesas,usb2-phy-r8a774a1 # RZ/G2M > > + - renesas,usb2-phy-r8a774b1 # RZ/G2N > > + - renesas,usb2-phy-r8a774c0 # RZ/G2E > > + - renesas,usb2-phy-r8a7795 # R-Car H3 > > + - renesas,usb2-phy-r8a7796 # R-Car M3-W > > + - renesas,usb2-phy-r8a77965 # R-Car M3-N > > + - renesas,usb2-phy-r8a77990 # R-Car E3 > > + - renesas,usb2-phy-r8a77995 # R-Car D3 > > + - const: renesas,rcar-gen3-usb2-phy > > + > > + reg: > > + # base address and length of the registers block for the PHY. > > + maxItems: 1 > > + > > + clocks: > > + # clock phandle and specifier pair(s). > > + minItems: 1 > > + maxItems: 2 > > + > > + clock-names: > > + # for RZ/A2 > > + minItems: 1 > > + maxItems: 2 > > + items: > > + - const: fck > > + - const: usb_x1 > > + > > + '#phy-cells': > > + # see phy-bindings.txt in the same directory > > Drop this so we don't have to fix later. I'll drop this. > > + enum: [0, 1] # and 0 is deprecated. > > + > > + interrupts: > > + maxItems: 1 > > + > > + power-domains: > > + maxItems: 1 > > + > > + resets: > > + minItems: 1 > > + maxItems: 2 > > Needs 'items' to define each entry. I'll add "items:" and two "description:" on the resets property. > > + > > + vbus-supply: > > + $ref: /schemas/types.yaml#/definitions/phandle > > Can drop this, *-supply already has a type. I'll drop it. > > + description: | > > + Phandle to a regulator that provides power to the VBUS. This regulator > > + will be managed during the PHY power on/off sequence. > > + > > + renesas,no-otg-pins: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: | > > + specify when a board does not provide proper otg pins. > > + > > + dr_mode: > > + $ref: /schemas/types.yaml#/definitions/string > > I think we already have a common definition, so just 'true' is enough. I'll fix it. Best regards, Yoshihiro Shimoda
On Mon, Oct 28, 2019 at 11:14 PM Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> wrote: > > Hi Rob, > > Thank you for your review! > > > From: Rob Herring, Sent: Tuesday, October 29, 2019 10:57 AM > > > > On Fri, Oct 18, 2019 at 05:38:53PM +0900, Yoshihiro Shimoda wrote: > > > Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation > > > to json-schema. > > > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > > --- > > > .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 -------------- > > > .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 106 +++++++++++++++++++++ > > > 2 files changed, 106 insertions(+), 70 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > > create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > > > > > diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > new file mode 100644 > > > index 00000000..0f109c2 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > @@ -0,0 +1,106 @@ > > > +# SPDX-License-Identifier: GPL-2.0-only > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Renesas R-Car generation 3 USB 2.0 PHY > > > + > > > +maintainers: > > > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > > + > > > +properties: > > > + compatible: > > > + oneOf: > > > > This: > > What does the "This:" mean? I was referring to the 3 lines below. I was trying to be clear which lines to replace with just 'const'. > If I replaced the "oneOf:" with "This:", > the following error happens when "make dt_binding_check": > > SCHEMA Documentation/devicetree/bindings/processed-schema.yaml > warning: no schema found in file: Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > [snip]/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml: ignoring, error in schema 'compatible' > Documentation/devicetree/bindings/Makefile:33: recipe for target 'Documentation/devicetree/bindings/processed-schema.yaml' failed > make[1]: *** [Documentation/devicetree/bindings/processed-schema.yaml] Error 255 > Makefile:1263: recipe for target 'dt_binding_check' failed > make: *** [dt_binding_check] Error 2 > > > > + - items: > > > + - enum: > > > + - renesas,usb2-phy-r8a77470 # RZ/G1C > > > > You can simplify to just: > > > > - const: renesas,usb2-phy-r8a77470 # RZ/G1C > > I'll fix it.
Hi Rob, > From: Rob Herring, Sent: Wednesday, October 30, 2019 5:20 AM > > On Mon, Oct 28, 2019 at 11:14 PM Yoshihiro Shimoda > <yoshihiro.shimoda.uh@renesas.com> wrote: <snip> > > > > diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > > new file mode 100644 > > > > index 00000000..0f109c2 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > > > @@ -0,0 +1,106 @@ > > > > +# SPDX-License-Identifier: GPL-2.0-only > > > > +%YAML 1.2 > > > > +--- > > > > +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: Renesas R-Car generation 3 USB 2.0 PHY > > > > + > > > > +maintainers: > > > > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > > > + > > > > +properties: > > > > + compatible: > > > > + oneOf: > > > > > > This: > > > > What does the "This:" mean? > > I was referring to the 3 lines below. I was trying to be clear which > lines to replace with just 'const'. Thank you for the reply! I understood it. Best regards, Yoshihiro Shimoda > > If I replaced the "oneOf:" with "This:", > > the following error happens when "make dt_binding_check": > > > > SCHEMA Documentation/devicetree/bindings/processed-schema.yaml > > warning: no schema found in file: Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml > > [snip]/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml: ignoring, error in schema 'compatible' > > Documentation/devicetree/bindings/Makefile:33: recipe for target > 'Documentation/devicetree/bindings/processed-schema.yaml' failed > > make[1]: *** [Documentation/devicetree/bindings/processed-schema.yaml] Error 255 > > Makefile:1263: recipe for target 'dt_binding_check' failed > > make: *** [dt_binding_check] Error 2 > > > > > > + - items: > > > > + - enum: > > > > + - renesas,usb2-phy-r8a77470 # RZ/G1C > > > > > > You can simplify to just: > > > > > > - const: renesas,usb2-phy-r8a77470 # RZ/G1C > > > > I'll fix it.
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt deleted file mode 100644 index 7734b21..00000000 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Renesas R-Car generation 3 USB 2.0 PHY - -This file provides information on what the device node for the R-Car generation -3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain. - -Required properties: -- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210 - SoC. - "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 - SoC. - "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 - SoC. - "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1 - SoC. - "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0 - SoC. - "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 - SoC. - "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 - SoC. - "renesas,usb2-phy-r8a77965" if the device is a part of an - R8A77965 SoC. - "renesas,usb2-phy-r8a77990" if the device is a part of an - R8A77990 SoC. - "renesas,usb2-phy-r8a77995" if the device is a part of an - R8A77995 SoC. - "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or - RZ/A2 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the partial USB 2.0 Host register block. -- clocks: clock phandle and specifier pair(s). -- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and - using <0> is deprecated). - -The phandle's argument in the PHY specifier is the INT_STATUS bit of controller: -- 1 = USBH_INTA (OHCI) -- 2 = USBH_INTB (EHCI) -- 3 = UCOM_INT (OTG and BC) - -Optional properties: -To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are -combined, the device tree node should set interrupt properties to use the -channel as USB OTG: -- interrupts: interrupt specifier for the PHY. -- vbus-supply: Phandle to a regulator that provides power to the VBUS. This - regulator will be managed during the PHY power on/off sequence. -- renesas,no-otg-pins: boolean, specify when a board does not provide proper - otg pins. -- dr_mode: string, indicates the working mode for the PHY. Can be "host", - "peripheral", or "otg". Should be set if otg controller is not used. - - -Example (R-Car H3): - - usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee080200 0 0x700>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - }; - - usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 702>; - }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml new file mode 100644 index 00000000..0f109c2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 2.0 PHY + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,usb2-phy-r8a77470 # RZ/G1C + - items: + - enum: + - renesas,usb2-phy-r7s9210 # RZ/A2 + - renesas,usb2-phy-r8a774a1 # RZ/G2M + - renesas,usb2-phy-r8a774b1 # RZ/G2N + - renesas,usb2-phy-r8a774c0 # RZ/G2E + - renesas,usb2-phy-r8a7795 # R-Car H3 + - renesas,usb2-phy-r8a7796 # R-Car M3-W + - renesas,usb2-phy-r8a77965 # R-Car M3-N + - renesas,usb2-phy-r8a77990 # R-Car E3 + - renesas,usb2-phy-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-usb2-phy + + reg: + # base address and length of the registers block for the PHY. + maxItems: 1 + + clocks: + # clock phandle and specifier pair(s). + minItems: 1 + maxItems: 2 + + clock-names: + # for RZ/A2 + minItems: 1 + maxItems: 2 + items: + - const: fck + - const: usb_x1 + + '#phy-cells': + # see phy-bindings.txt in the same directory + enum: [0, 1] # and 0 is deprecated. + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to a regulator that provides power to the VBUS. This regulator + will be managed during the PHY power on/off sequence. + + renesas,no-otg-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: | + specify when a board does not provide proper otg pins. + + dr_mode: + $ref: /schemas/types.yaml#/definitions/string + description: | + indicates the working mode for the PHY. Can be "host", "peripheral", or + "otg". Should be set if otg controller is not used. + +required: + - compatible + - reg + - clocks + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + #phy-cells = <1>; + }; + + usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + #phy-cells = <1>; + };
Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation to json-schema. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 -------------- .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 106 +++++++++++++++++++++ 2 files changed, 106 insertions(+), 70 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml