@@ -11,11 +11,16 @@ is to receive from the device.
Xilinx AXI CDMA engine, it does transfers between memory-mapped source
address and a memory-mapped destination address.
+Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream
+target devices. It can be configured to have up to 16 independent transmit
+and receive channels.
+
Required properties:
- compatible: Should be one of-
"xlnx,axi-vdma-1.00.a"
"xlnx,axi-dma-1.00.a"
"xlnx,axi-cdma-1.00.a"
+ "xlnx,axi-mcdma-1.00.a"
- #dma-cells: Should be <1>, see "dmas" property below
- reg: Should contain VDMA registers location and length.
- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
@@ -31,7 +36,7 @@ Required properties:
"m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
For CDMA:
Required elements: "s_axi_lite_aclk", "m_axi_aclk"
- For AXIDMA:
+ For AXIDMA and MCDMA:
Required elements: "s_axi_lite_aclk"
Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
"m_axi_sg_aclk"
@@ -39,7 +44,7 @@ Required properties:
Required properties for VDMA:
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
-Optional properties for AXI DMA:
+Optional properties for AXI DMA and MCDMA:
- xlnx,sg-length-width: Should be set to the width in bits of the length
register as configured in h/w. Takes values {8...26}. If the property
is missing or invalid then the default value 23 is used. This is the
@@ -56,8 +61,8 @@ Required child node properties:
For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
"xlnx,axi-vdma-s2mm-channel".
For CDMA: It should be "xlnx,axi-cdma-channel".
- For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or
- "xlnx,axi-dma-s2mm-channel".
+ For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel"
+ or "xlnx,axi-dma-s2mm-channel".
- interrupts: Should contain per channel VDMA interrupts.
- xlnx,datawidth: Should contain the stream data width, take values
{32,64...1024}.
@@ -70,6 +75,8 @@ Optional child node properties for VDMA:
enabled/disabled in hardware.
- xlnx,enable-vert-flip: Tells vertical flip is
enabled/disabled in hardware(S2MM path).
+Optional child node properties for MCDMA:
+- dma-channels: Number of dma channels in child node.
Example:
++++++++
Add devicetree binding for Xilinx AXI Multichannel Direct Memory Access (AXI MCDMA) IP. The AXI MCDMA provides high-bandwidth direct memory access between memory and AXI4-Stream target peripherals. The AXI MCDMA core provides a scatter-gather interface with multiple channel support with independent configuration. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> --- Keep compatible string one per line. Suggested by Rob. Reuse the existing xlnx,axi-dma-* channel names. Suggested by Rob. --- .../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)