diff mbox series

[1/2] dt-bindings: mailbox: stm32-ipcc: Updates for wakeup management

Message ID 1571228029-31652-2-git-send-email-fabien.dessenne@st.com
State Not Applicable, archived
Headers show
Series mailbox: stm32-ipcc: rework wakeup | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Fabien DESSENNE Oct. 16, 2019, 12:13 p.m. UTC 
The wakeup specific IRQ management is no more needed to wake up the stm32
plaform.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
---
 Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring Oct. 29, 2019, 1:26 a.m. UTC | #1 
On Wed, Oct 16, 2019 at 02:13:48PM +0200, Fabien Dessenne wrote:
> The wakeup specific IRQ management is no more needed to wake up the stm32
> plaform.

typo

> 
> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> ---
>  Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

With that fixed,

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
index 1d2b7fe..139c06a 100644
--- a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
+++ b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
@@ -14,9 +14,9 @@  Required properties:
                    property. Must contain the following entries:
                    - "rx"
                    - "tx"
-                   - "wakeup"
 - interrupts:   Interrupt specifiers for "rx channel occupied", "tx channel
-                free" and "system wakeup".
+                free". If "wakeup-source" is set the rx interrupt is the
+                one used to wake up the system.
 - #mbox-cells:  Number of cells required for the mailbox specifier. Must be 1.
                 The data contained in the mbox specifier of the "mboxes"
                 property in the client node is the mailbox channel index.