| Message ID | 1571565847-10338-2-git-send-email-kvalo@codeaurora.org |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | ath11k: driver for Qualcomm IEEE 802.11ax devices | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | fail | build log |
On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote: > ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a > bindings document for the driver, first documenting IPQ8074 which is the > only device ath11k currently supports. > > Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> > --- > .../bindings/net/wireless/qcom,ath11k.yaml | 277 +++++++++++++++++++++ > 1 file changed, 277 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > new file mode 100644 > index 000000000000..5d25542f85f8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > @@ -0,0 +1,277 @@ > +# SPDX-License-Identifier: BSD-3-Clause-Clear (GPL-2.0-only OR BSD-2-Clause) please. > +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. > + > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies ath11k wireless devices Generic Binding > + > +maintainers: > + - Kalle Valo <kvalo@codeaurora.org> > + > +description: | > + These are dt entries used on ath11k driver. AHB based ipq8074 uses most of the properties defined in this doc. Describe the h/w, not what the document is. Wrap your lines. > + > +properties: > + compatible: > + const: "qcom,ipq8074-wifi" Drop quotes. > + > + reg: > + description: Address and length of the register set for the device Don't need a description. > + maxItems: 1 > + > + interrupts: > + minItems: 53 > + maxItems: 53 Assuming the list below has 53 entries min/maxItems is implied. > + items: > + - description: misc-pulse1 interrupt events > + - description: misc-latch interrupt events > + - description: sw exception interrupt events > + - description: watchdog interrupt events > + - description: interrupt event for ring CE0 > + - description: interrupt event for ring CE1 > + - description: interrupt event for ring CE2 > + - description: interrupt event for ring CE3 > + - description: interrupt event for ring CE4 > + - description: interrupt event for ring CE5 > + - description: interrupt event for ring CE6 > + - description: interrupt event for ring CE7 > + - description: interrupt event for ring CE8 > + - description: interrupt event for ring CE9 > + - description: interrupt event for ring CE10 > + - description: interrupt event for ring CE11 > + - description: interrupt event for ring host2wbm-desc-feed > + - description: interrupt event for ring host2reo-re-injection > + - description: interrupt event for ring host2reo-command > + - description: interrupt event for ring host2rxdma-monitor-ring3 > + - description: interrupt event for ring host2rxdma-monitor-ring2 > + - description: interrupt event for ring host2rxdma-monitor-ring1 > + - description: interrupt event for ring reo2ost-exception > + - description: interrupt event for ring wbm2host-rx-release > + - description: interrupt event for ring reo2host-status > + - description: interrupt event for ring reo2host-destination-ring4 > + - description: interrupt event for ring reo2host-destination-ring3 > + - description: interrupt event for ring reo2host-destination-ring2 > + - description: interrupt event for ring reo2host-destination-ring1 > + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 > + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 > + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 > + - description: interrupt event for ring ppdu-end-interrupts-mac3 > + - description: interrupt event for ring ppdu-end-interrupts-mac2 > + - description: interrupt event for ring ppdu-end-interrupts-mac1 > + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 > + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 > + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 > + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 > + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 > + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 > + - description: interrupt event for ring rxdma2host-destination-ring-mac3 > + - description: interrupt event for ring rxdma2host-destination-ring-mac2 > + - description: interrupt event for ring rxdma2host-destination-ring-mac1 > + - description: interrupt event for ring host2tcl-input-ring4 > + - description: interrupt event for ring host2tcl-input-ring3 > + - description: interrupt event for ring host2tcl-input-ring2 > + - description: interrupt event for ring host2tcl-input-ring1 > + - description: interrupt event for ring wbm2host-tx-completions-ring3 > + - description: interrupt event for ring wbm2host-tx-completions-ring2 > + - description: interrupt event for ring wbm2host-tx-completions-ring1 > + - description: interrupt event for ring tcl2host-status-ring > + > + > + interrupt-names: > + minItems: 53 > + maxItems: 53 > + items: > + - const: misc-pulse1 > + - const: misc-latch > + - const: sw-exception > + - const: watchdog > + - const: ce0 > + - const: ce1 > + - const: ce2 > + - const: ce3 > + - const: ce4 > + - const: ce5 > + - const: ce6 > + - const: ce7 > + - const: ce8 > + - const: ce9 > + - const: ce10 > + - const: ce11 > + - const: host2wbm-desc-feed > + - const: host2reo-re-injection > + - const: host2reo-command > + - const: host2rxdma-monitor-ring3 > + - const: host2rxdma-monitor-ring2 > + - const: host2rxdma-monitor-ring1 > + - const: reo2ost-exception > + - const: wbm2host-rx-release > + - const: reo2host-status > + - const: reo2host-destination-ring4 > + - const: reo2host-destination-ring3 > + - const: reo2host-destination-ring2 > + - const: reo2host-destination-ring1 > + - const: rxdma2host-monitor-destination-mac3 > + - const: rxdma2host-monitor-destination-mac2 > + - const: rxdma2host-monitor-destination-mac1 > + - const: ppdu-end-interrupts-mac3 > + - const: ppdu-end-interrupts-mac2 > + - const: ppdu-end-interrupts-mac1 > + - const: rxdma2host-monitor-status-ring-mac3 > + - const: rxdma2host-monitor-status-ring-mac2 > + - const: rxdma2host-monitor-status-ring-mac1 > + - const: host2rxdma-host-buf-ring-mac3 > + - const: host2rxdma-host-buf-ring-mac2 > + - const: host2rxdma-host-buf-ring-mac1 > + - const: rxdma2host-destination-ring-mac3 > + - const: rxdma2host-destination-ring-mac2 > + - const: rxdma2host-destination-ring-mac1 > + - const: host2tcl-input-ring4 > + - const: host2tcl-input-ring3 > + - const: host2tcl-input-ring2 > + - const: host2tcl-input-ring1 > + - const: wbm2host-tx-completions-ring3 > + - const: wbm2host-tx-completions-ring2 > + - const: wbm2host-tx-completions-ring1 > + - const: tcl2host-status-ring > + > + qcom,rproc: > + $ref: /schemas/types.yaml#definitions/phandle > + description: > + DT entry of q6v5-wcss remoteproc driver. > + Phandle to a node that can contain the following properties > + * compatible > + * reg > + * reg-names > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - qcom,rproc > + > +additionalProperties: false > + > +examples: > + - | > + > + q6v5_wcss: q6v5_wcss@CD00000 { > + compatible = "qcom,ipq8074-wcss-pil"; > + reg = <0xCD00000 0x4040>, > + <0x4AB000 0x20>; > + reg-names = "qdsp6", > + "rmb"; Mixed tabs and spaces. YAML needs spaces (at least at the beginning), so just use spaces. More below... > + }; > + > + wifi0: wifi@c000000 { > + compatible = "qcom,ipq8074-wifi"; > + reg = <0xc000000 0x2000000>; > + interrupts = <0 320 1>, > + <0 319 1>, > + <0 318 1>, > + <0 317 1>, > + <0 316 1>, > + <0 315 1>, > + <0 314 1>, > + <0 311 1>, > + <0 310 1>, > + <0 411 1>, > + <0 410 1>, > + <0 40 1>, > + <0 39 1>, > + <0 302 1>, > + <0 301 1>, > + <0 37 1>, > + <0 36 1>, > + <0 296 1>, > + <0 295 1>, > + <0 294 1>, > + <0 293 1>, > + <0 292 1>, > + <0 291 1>, > + <0 290 1>, > + <0 289 1>, > + <0 288 1>, > + <0 239 1>, > + <0 236 1>, > + <0 235 1>, > + <0 234 1>, > + <0 233 1>, > + <0 232 1>, > + <0 231 1>, > + <0 230 1>, > + <0 229 1>, > + <0 228 1>, > + <0 224 1>, > + <0 223 1>, > + <0 203 1>, > + <0 183 1>, > + <0 180 1>, > + <0 179 1>, > + <0 178 1>, > + <0 177 1>, > + <0 176 1>, > + <0 163 1>, > + <0 162 1>, > + <0 160 1>, > + <0 159 1>, > + <0 158 1>, > + <0 157 1>, > + <0 156 1>; > + interrupt-names = "misc-pulse1", > + "misc-latch", > + "sw-exception", > + "watchdog", > + "ce0", > + "ce1", > + "ce2", > + "ce3", > + "ce4", > + "ce5", > + "ce6", > + "ce7", > + "ce8", > + "ce9", > + "ce10", > + "ce11", > + "host2wbm-desc-feed", > + "host2reo-re-injection", > + "host2reo-command", > + "host2rxdma-monitor-ring3", > + "host2rxdma-monitor-ring2", > + "host2rxdma-monitor-ring1", > + "reo2ost-exception", > + "wbm2host-rx-release", > + "reo2host-status", > + "reo2host-destination-ring4", > + "reo2host-destination-ring3", > + "reo2host-destination-ring2", > + "reo2host-destination-ring1", > + "rxdma2host-monitor-destination-mac3", > + "rxdma2host-monitor-destination-mac2", > + "rxdma2host-monitor-destination-mac1", > + "ppdu-end-interrupts-mac3", > + "ppdu-end-interrupts-mac2", > + "ppdu-end-interrupts-mac1", > + "rxdma2host-monitor-status-ring-mac3", > + "rxdma2host-monitor-status-ring-mac2", > + "rxdma2host-monitor-status-ring-mac1", > + "host2rxdma-host-buf-ring-mac3", > + "host2rxdma-host-buf-ring-mac2", > + "host2rxdma-host-buf-ring-mac1", > + "rxdma2host-destination-ring-mac3", > + "rxdma2host-destination-ring-mac2", > + "rxdma2host-destination-ring-mac1", > + "host2tcl-input-ring4", > + "host2tcl-input-ring3", > + "host2tcl-input-ring2", > + "host2tcl-input-ring1", > + "wbm2host-tx-completions-ring3", > + "wbm2host-tx-completions-ring2", > + "wbm2host-tx-completions-ring1", > + "tcl2host-status-ring"; > + qcom,rproc = <&q6v5_wcss>; > + }; >
Rob Herring <robh@kernel.org> writes: > On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote: >> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a >> bindings document for the driver, first documenting IPQ8074 which is the >> only device ath11k currently supports. >> >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> >> --- >> .../bindings/net/wireless/qcom,ath11k.yaml | 277 +++++++++++++++++++++ >> 1 file changed, 277 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> new file mode 100644 >> index 000000000000..5d25542f85f8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> @@ -0,0 +1,277 @@ >> +# SPDX-License-Identifier: BSD-3-Clause-Clear > > (GPL-2.0-only OR BSD-2-Clause) please. I chose BSD-3-Clause-Clear because ath11k uses that license and I would prefer to use the same license throughout the driver. Also it's categorised as a preferred license: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/LICENSES/preferred Any specific reason why you want to change the license? >> +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. >> + >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies ath11k wireless devices Generic Binding >> + >> +maintainers: >> + - Kalle Valo <kvalo@codeaurora.org> >> + >> +description: | >> + These are dt entries used on ath11k driver. AHB based ipq8074 uses >> most of the properties defined in this doc. > > Describe the h/w, not what the document is. > > Wrap your lines. > >> + >> +properties: >> + compatible: >> + const: "qcom,ipq8074-wifi" > > Drop quotes. > >> + >> + reg: >> + description: Address and length of the register set for the device > > Don't need a description. > >> + maxItems: 1 >> + >> + interrupts: >> + minItems: 53 >> + maxItems: 53 > > Assuming the list below has 53 entries min/maxItems is implied. Will fix these. >> +examples: >> + - | >> + >> + q6v5_wcss: q6v5_wcss@CD00000 { >> + compatible = "qcom,ipq8074-wcss-pil"; >> + reg = <0xCD00000 0x4040>, >> + <0x4AB000 0x20>; >> + reg-names = "qdsp6", >> + "rmb"; > > Mixed tabs and spaces. YAML needs spaces (at least at the beginning), so > just use spaces. More below... Ok, I'll remove all the tabs from the doc. Thanks for the review!
On Sun, Oct 27, 2019 at 8:28 AM Kalle Valo <kvalo@codeaurora.org> wrote: > > Rob Herring <robh@kernel.org> writes: > > > On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote: > >> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a > >> bindings document for the driver, first documenting IPQ8074 which is the > >> only device ath11k currently supports. > >> > >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> > >> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> > >> --- > >> .../bindings/net/wireless/qcom,ath11k.yaml | 277 +++++++++++++++++++++ > >> 1 file changed, 277 insertions(+) > >> > >> diff --git > >> a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > >> b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > >> new file mode 100644 > >> index 000000000000..5d25542f85f8 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > >> @@ -0,0 +1,277 @@ > >> +# SPDX-License-Identifier: BSD-3-Clause-Clear > > > > (GPL-2.0-only OR BSD-2-Clause) please. > > I chose BSD-3-Clause-Clear because ath11k uses that license and I would > prefer to use the same license throughout the driver. The schema is not the driver. > Also it's > categorised as a preferred license: > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/LICENSES/preferred So are the 2 I listed. (GPL-2.0 is the deprecated version of GPL-2.0-only). > Any specific reason why you want to change the license? So that we have some sort of consistency between schemas. It's been a free-for-all for licensing dts files, headers and bindings til now, and I'm trying to address some of that as we add schema. Rob
Rob Herring <robh@kernel.org> writes: > On Sun, Oct 27, 2019 at 8:28 AM Kalle Valo <kvalo@codeaurora.org> wrote: >> >> Rob Herring <robh@kernel.org> writes: >> >> > On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote: >> >> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a >> >> bindings document for the driver, first documenting IPQ8074 which is the >> >> only device ath11k currently supports. >> >> >> >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >> >> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> >> >> --- >> >> .../bindings/net/wireless/qcom,ath11k.yaml | 277 +++++++++++++++++++++ >> >> 1 file changed, 277 insertions(+) >> >> >> >> diff --git >> >> a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> >> b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> >> new file mode 100644 >> >> index 000000000000..5d25542f85f8 >> >> --- /dev/null >> >> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> >> @@ -0,0 +1,277 @@ >> >> +# SPDX-License-Identifier: BSD-3-Clause-Clear >> > >> > (GPL-2.0-only OR BSD-2-Clause) please. >> >> I chose BSD-3-Clause-Clear because ath11k uses that license and I would >> prefer to use the same license throughout the driver. > > The schema is not the driver. > >> Also it's >> categorised as a preferred license: >> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/LICENSES/preferred > > So are the 2 I listed. (GPL-2.0 is the deprecated version of GPL-2.0-only). > >> Any specific reason why you want to change the license? > > So that we have some sort of consistency between schemas. It's been a > free-for-all for licensing dts files, headers and bindings til now, > and I'm trying to address some of that as we add schema. Yeah, makes sense. I'll change the license in the next version. Thanks for the review.
Rob Herring <robh@kernel.org> writes: > On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote: >> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a >> bindings document for the driver, first documenting IPQ8074 which is the >> only device ath11k currently supports. >> >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [...] >> + interrupts: >> + minItems: 53 >> + maxItems: 53 > > Assuming the list below has 53 entries min/maxItems is implied. There's actually 52 entries in the items list below this, I need to check if we are missing an entry or is this just a miscalculation. >> + interrupt-names: >> + minItems: 53 >> + maxItems: 53 And I assume I can remove minItems and maxItems here as well.
Kalle Valo <kvalo@codeaurora.org> writes: > Rob Herring <robh@kernel.org> writes: > >> On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote: >>> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a >>> bindings document for the driver, first documenting IPQ8074 which is the >>> only device ath11k currently supports. >>> >>> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> > > [...] > >>> + interrupts: >>> + minItems: 53 >>> + maxItems: 53 >> >> Assuming the list below has 53 entries min/maxItems is implied. > > There's actually 52 entries in the items list below this, I need to > check if we are missing an entry or is this just a miscalculation. I got a confirmation internally, 52 entries is correct.
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml new file mode 100644 index 000000000000..5d25542f85f8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: BSD-3-Clause-Clear +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath11k wireless devices Generic Binding + +maintainers: + - Kalle Valo <kvalo@codeaurora.org> + +description: | + These are dt entries used on ath11k driver. AHB based ipq8074 uses most of the properties defined in this doc. + +properties: + compatible: + const: "qcom,ipq8074-wifi" + + reg: + description: Address and length of the register set for the device + maxItems: 1 + + interrupts: + minItems: 53 + maxItems: 53 + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + + + interrupt-names: + minItems: 53 + maxItems: 53 + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + qcom,rproc: + $ref: /schemas/types.yaml#definitions/phandle + description: + DT entry of q6v5-wcss remoteproc driver. + Phandle to a node that can contain the following properties + * compatible + * reg + * reg-names + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,rproc + +additionalProperties: false + +examples: + - | + + q6v5_wcss: q6v5_wcss@CD00000 { + compatible = "qcom,ipq8074-wcss-pil"; + reg = <0xCD00000 0x4040>, + <0x4AB000 0x20>; + reg-names = "qdsp6", + "rmb"; + }; + + wifi0: wifi@c000000 { + compatible = "qcom,ipq8074-wifi"; + reg = <0xc000000 0x2000000>; + interrupts = <0 320 1>, + <0 319 1>, + <0 318 1>, + <0 317 1>, + <0 316 1>, + <0 315 1>, + <0 314 1>, + <0 311 1>, + <0 310 1>, + <0 411 1>, + <0 410 1>, + <0 40 1>, + <0 39 1>, + <0 302 1>, + <0 301 1>, + <0 37 1>, + <0 36 1>, + <0 296 1>, + <0 295 1>, + <0 294 1>, + <0 293 1>, + <0 292 1>, + <0 291 1>, + <0 290 1>, + <0 289 1>, + <0 288 1>, + <0 239 1>, + <0 236 1>, + <0 235 1>, + <0 234 1>, + <0 233 1>, + <0 232 1>, + <0 231 1>, + <0 230 1>, + <0 229 1>, + <0 228 1>, + <0 224 1>, + <0 223 1>, + <0 203 1>, + <0 183 1>, + <0 180 1>, + <0 179 1>, + <0 178 1>, + <0 177 1>, + <0 176 1>, + <0 163 1>, + <0 162 1>, + <0 160 1>, + <0 159 1>, + <0 158 1>, + <0 157 1>, + <0 156 1>; + interrupt-names = "misc-pulse1", + "misc-latch", + "sw-exception", + "watchdog", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring3", + "host2rxdma-monitor-ring2", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "ppdu-end-interrupts-mac3", + "ppdu-end-interrupts-mac2", + "ppdu-end-interrupts-mac1", + "rxdma2host-monitor-status-ring-mac3", + "rxdma2host-monitor-status-ring-mac2", + "rxdma2host-monitor-status-ring-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "rxdma2host-destination-ring-mac3", + "rxdma2host-destination-ring-mac2", + "rxdma2host-destination-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "tcl2host-status-ring"; + qcom,rproc = <&q6v5_wcss>; + };