diff mbox series

net: add tulip (dec21143) driver

Message ID 20191019173801.939-1-svens@stackframe.org
State New
Headers show
Series net: add tulip (dec21143) driver | expand

Commit Message

Sven Schnelle Oct. 19, 2019, 5:38 p.m. UTC
This adds the basic functionality to emulate a Tulip NIC.

Implemented are:

- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY

Not implemented, mostly because i had no OS using these functions:

- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion

Successfully tested with the following Operating Systems:

- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX

Signed-off-by: Sven Schnelle <svens@stackframe.org>
---
 MAINTAINERS              |   6 +
 hw/net/Kconfig           |   5 +
 hw/net/Makefile.objs     |   1 +
 hw/net/trace-events      |  14 +
 hw/net/tulip.c           | 992 +++++++++++++++++++++++++++++++++++++++
 hw/net/tulip.h           | 265 +++++++++++
 include/hw/pci/pci_ids.h |   1 +
 7 files changed, 1284 insertions(+)
 create mode 100644 hw/net/tulip.c
 create mode 100644 hw/net/tulip.h

Comments

Jason Wang Oct. 22, 2019, 3:29 a.m. UTC | #1
On 2019/10/20 上午1:38, Sven Schnelle wrote:
> This adds the basic functionality to emulate a Tulip NIC.
>
> Implemented are:
>
> - RX and TX functionality
> - Perfect Frame Filtering
> - Big/Little Endian descriptor support
> - 93C46 EEPROM support
> - LXT970 PHY
>
> Not implemented, mostly because i had no OS using these functions:
>
> - Imperfect frame filtering
> - General Purpose Timer
> - Transmit automatic polling
> - Boot ROM support
> - SIA interface
> - Big/Little Endian data buffer conversion
>
> Successfully tested with the following Operating Systems:
>
> - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
> - HPPA Linux
> - Windows XP
> - HP-UX
>
> Signed-off-by: Sven Schnelle<svens@stackframe.org>
> ---


Applied.

If possible, please add a qtest for this.

Thanks
Peter Maydell Oct. 22, 2019, 12:02 p.m. UTC | #2
On Sat, 19 Oct 2019 at 18:40, Sven Schnelle <svens@stackframe.org> wrote:
>
> This adds the basic functionality to emulate a Tulip NIC.
>
> Implemented are:
>
> - RX and TX functionality
> - Perfect Frame Filtering
> - Big/Little Endian descriptor support
> - 93C46 EEPROM support
> - LXT970 PHY
>
> Not implemented, mostly because i had no OS using these functions:
>
> - Imperfect frame filtering
> - General Purpose Timer
> - Transmit automatic polling
> - Boot ROM support
> - SIA interface
> - Big/Little Endian data buffer conversion
>
> Successfully tested with the following Operating Systems:
>
> - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
> - HPPA Linux
> - Windows XP
> - HP-UX
>
> Signed-off-by: Sven Schnelle <svens@stackframe.org>
> ---

Thanks for this patch; I have some code review comments below;
nothing too difficult to address I think.

> diff --git a/hw/net/tulip.c b/hw/net/tulip.c
> new file mode 100644
> index 0000000000..a99b1b81c4
> --- /dev/null
> +++ b/hw/net/tulip.c
> @@ -0,0 +1,992 @@
> +/*
> + * QEMU TULIP Emulation
> + *
> + * Copyright (c) 2019 Sven Schnelle <svens@stackframe.org>
> + *
> + * This work is licensed under the GNU GPL license version 2 or later.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "hw/irq.h"
> +#include "hw/pci/pci.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/nvram/eeprom93xx.h"
> +#include "migration/vmstate.h"
> +#include "sysemu/sysemu.h"
> +#include "tulip.h"
> +#include "trace.h"
> +#include "net/eth.h"
> +
> +typedef struct TULIPState {
> +    PCIDevice dev;
> +    MemoryRegion io;
> +    MemoryRegion memory;
> +    NICConf c;
> +    qemu_irq irq;
> +    NICState *nic;
> +    eeprom_t *eeprom;
> +    uint32_t csr[16];
> +
> +    /* state for MII */
> +    uint32_t old_csr9;
> +    uint32_t mii_word;
> +    uint32_t mii_bitcnt;
> +
> +    hwaddr current_rx_desc;
> +    hwaddr current_tx_desc;
> +
> +    uint8_t rx_frame[2048];
> +    uint8_t tx_frame[2048];
> +    uint16_t tx_frame_len;
> +    uint16_t rx_frame_len;
> +    uint16_t rx_frame_size;
> +
> +    uint32_t rx_status;
> +    uint8_t filter[16][6];
> +} TULIPState;
> +
> +static const VMStateDescription vmstate_pci_tulip = {
> +    .name = "tulip",
> +    .fields = (VMStateField[]) {
> +        VMSTATE_PCI_DEVICE(dev, TULIPState),
> +        VMSTATE_UINT32_ARRAY(csr, TULIPState, 16),
> +        VMSTATE_UINT32(old_csr9, TULIPState),
> +        VMSTATE_UINT32(mii_word, TULIPState),
> +        VMSTATE_UINT32(mii_bitcnt, TULIPState),
> +        VMSTATE_UINT64(current_rx_desc, TULIPState),
> +        VMSTATE_UINT64(current_tx_desc, TULIPState),

I wondered whether the device really maintained these as separate
persistent internal state from any of the guest-visible registers.
Checking the datasheet suggests it really does (eg if transmit
is suspended because we hit a descriptor owned by the host,
then the datasheet just says the guest can fix the ownership
and issue a poll-demand, so we must have to keep the address
of that descriptor in the device to retry it).

> +        VMSTATE_BUFFER(rx_frame, TULIPState),
> +        VMSTATE_BUFFER(tx_frame, TULIPState),
> +        VMSTATE_UINT16(rx_frame_len, TULIPState),
> +        VMSTATE_UINT16(tx_frame_len, TULIPState),
> +        VMSTATE_UINT16(rx_frame_size, TULIPState),
> +        VMSTATE_UINT32(rx_status, TULIPState),
> +        VMSTATE_UINT8_2DARRAY(filter, TULIPState, 16, 6),
> +        VMSTATE_END_OF_LIST()
> +    }
> +};
> +
> +static void tulip_desc_read(TULIPState *s, hwaddr p, void *buf)
> +{
> +        int i;
> +
> +        if (s->csr[0] & CSR0_DBO) {
> +            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
> +                ((uint32_t *)buf)[i] = ldl_be_pci_dma(&s->dev, p + (i << 2));
> +            }
> +        } else {
> +            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
> +                ((uint32_t *)buf)[i] = ldl_le_pci_dma(&s->dev, p + (i << 2));
> +            }
> +        }

Indentation in these functions seems wrong.

It looks like both tulip_desc_read() and tulip_desc_write()
always take a pointer to a struct tulip_descriptor and
are intended to either read or write exactly that much
data -- I think it would be better to use the right type in
the function, to indicate you can't pass in any old buffer.

Casting a void* to uint32_t* to write an integer into it risks
alignment issues. If you need to write a 32-bit value into a
possibly unaligned value then we have stl_p() for that (with
ldl_p() for the read). But better would be to just do four stores
to desc->status, ->control, ->buf_addr1 , buf_addr2 directly.
Then you don't need to mark the tulip_descriptor struct as being
atribute packed (attribute packed is often a bad idea -- among
other things it means there's no guarantee that the struct
is aligned at all, and the compiler may be forced to generate
bad code for accessing fields within it).

> +}
> +
> +static void tulip_desc_write(TULIPState *s, hwaddr p, const void *buf)
> +{
> +        int i;
> +
> +        if (s->csr[0] & CSR0_DBO) {
> +            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
> +                stl_be_pci_dma(&s->dev, p + (i << 2), ((uint32_t *)buf)[i]);
> +            }
> +        } else {
> +            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
> +                stl_le_pci_dma(&s->dev, p + (i << 2), ((uint32_t *)buf)[i]);
> +            }
> +        }
> +}
> +

> +static ssize_t _tulip_receive(TULIPState *s, const uint8_t *buf, size_t size)

Don't use function names starting with _, please. (These
are reserved.)

> +{
> +    struct tulip_descriptor desc;
> +
> +    trace_tulip_receive(buf, size);
> +
> +    if (size < 14 || size > 2048 || s->rx_frame_len || tulip_rx_stopped(s)) {
> +        return 0;
> +    }
> +
> +    if (!tulip_filter_address(s, buf)) {
> +        return size;
> +    }
> +
> +    do {
> +        tulip_desc_read(s, s->current_rx_desc, &desc);
> +        tulip_dump_rx_descriptor(s, &desc);
> +
> +        if (!(desc.status & RDES0_OWN)) {
> +            s->csr[5] |= CSR5_RU;
> +            tulip_update_int(s);
> +            return s->rx_frame_size - s->rx_frame_len;
> +        }
> +        desc.status = 0;
> +
> +        if (!s->rx_frame_len) {
> +            s->rx_frame_size = size + 4;
> +            s->rx_status = RDES0_LS |
> +                 ((s->rx_frame_size & RDES0_FL_MASK) << RDES0_FL_SHIFT);
> +            desc.status |= RDES0_FS;
> +            memcpy(s->rx_frame, buf, size);
> +            s->rx_frame_len = s->rx_frame_size;
> +        }
> +
> +        tulip_copy_rx_bytes(s, &desc);
> +
> +        if (!s->rx_frame_len) {
> +            desc.status |= s->rx_status;
> +            s->csr[5] |= CSR5_RI;
> +            tulip_update_int(s);
> +        }
> +        tulip_dump_rx_descriptor(s, &desc);
> +        tulip_desc_write(s, s->current_rx_desc, &desc);
> +        tulip_next_rx_descriptor(s, &desc);
> +    } while (s->rx_frame_len);
> +    return size;
> +}
> +
> +static ssize_t tulip_receive(NetClientState *nc,
> +                             const uint8_t *buf, size_t size)
> +{
> +    return _tulip_receive(qemu_get_nic_opaque(nc), buf, size);
> +}
> +

> +static void tulip_reset(TULIPState *s)
> +{
> +    trace_tulip_reset();
> +
> +    s->csr[0] = 0xfe000000;
> +    s->csr[1] = 0xffffffff;
> +    s->csr[2] = 0xffffffff;
> +    s->csr[5] = 0xf0000000;
> +    s->csr[6] = 0x32000040;
> +    s->csr[7] = 0xf3fe0000;
> +    s->csr[8] = 0xe0000000;
> +    s->csr[9] = 0xfff483ff;
> +    s->csr[11] = 0xfffe0000;
> +    s->csr[12] = 0x000000c6;
> +    s->csr[13] = 0xffff0000;
> +    s->csr[14] = 0xffffffff;
> +    s->csr[15] = 0x8ff00000;
> +    tulip_update_int(s);

Reset functions shouldn't do things that call qemu_set_irq();
they should only update the device's internal state. (So you'll
want a reset function to call from the "write to a register
asked for a device reset" codepath which does do the update_int,
and one which just updates the internal registers, to use
as the dc->reset method.)

> +}
> +
> +static void tulip_write(void *opaque, hwaddr addr,
> +                           uint64_t data, unsigned size)
> +{
> +    TULIPState *s = opaque;
> +    trace_tulip_reg_write(addr, tulip_reg_name(addr), size, data);
> +
> +    if (addr > CSR(15)) {
> +        qemu_log_mask(LOG_GUEST_ERROR, "%s: out of bound access\n", __func__);
> +        return;
> +    }
> +
> +
> +    switch (addr) {
> +    case CSR(0):
> +        s->csr[0] = data;
> +        if (data & CSR0_SWR) {
> +            tulip_reset(s);
> +        }
> +        break;
> +
> +    case CSR(3):
> +        s->csr[3] = data & ~3ULL;
> +        s->current_rx_desc = s->csr[3];
> +            /* fall through */
> +
> +    case CSR(2):
> +        qemu_flush_queued_packets(qemu_get_queue(s->nic));
> +        break;
> +
> +    case CSR(4):
> +        s->csr[4] = data & ~3ULL;
> +        s->current_tx_desc = s->csr[4];
> +            /* fall through */
> +
> +    case CSR(1):
> +        if (tulip_ts(s) == CSR5_TS_SUSPENDED) {
> +            tulip_xmit_list_update(s);
> +        }
> +        break;
> +
> +    case CSR(5):
> +        /* Status register, write clears bit */
> +        s->csr[5] &= ~(data & (CSR5_TI | CSR5_TPS | CSR5_TU | CSR5_TJT |
> +                               CSR5_LNP_ANC | CSR5_UNF | CSR5_RI | CSR5_RU |
> +                               CSR5_RPS | CSR5_RWT | CSR5_ETI | CSR5_GTE |
> +                               CSR5_LNF | CSR5_FBE | CSR5_ERI | CSR5_AIS |
> +                               CSR5_NIS | CSR5_GPI | CSR5_LC));
> +        tulip_update_int(s);
> +        break;
> +
> +    case CSR(6):
> +        s->csr[6] = data;
> +        if (s->csr[6] & CSR6_SR) {
> +            tulip_update_rs(s, CSR5_RS_RUNNING_WAIT_RECEIVE);
> +            qemu_flush_queued_packets(qemu_get_queue(s->nic));
> +        } else {
> +            tulip_update_rs(s, CSR5_RS_STOPPED);
> +        }
> +
> +        if (s->csr[6] & CSR6_ST) {
> +            tulip_update_ts(s, CSR5_TS_SUSPENDED);
> +            tulip_xmit_list_update(s);
> +        } else {
> +            tulip_update_ts(s, CSR5_TS_STOPPED);
> +        }
> +        break;
> +
> +    case CSR(7):
> +        s->csr[7] = data;
> +        tulip_update_int(s);
> +        break;
> +
> +    case CSR(9):
> +        tulip_csr9_write(s, s->csr[9], data);
> +        /* don't clear MII read data */
> +        s->csr[9] &= CSR9_MDI;
> +        s->csr[9] |= (data & ~CSR9_MDI);
> +        tulip_mii(s);
> +        s->old_csr9 = s->csr[9];
> +        break;
> +
> +    case CSR(12):
> +        /* SIA Status register, some bits are cleared by writing 1 */
> +        s->csr[12] &= ~(data & (CSR12_MRA | CSR12_TRA | CSR12_ARA));
> +        break;
> +
> +    default:
> +        s->csr[addr >> 3] = data;

Do you really want to fall through to this as default?
CSR(x) is x << 3, so CSR(0) is 0, CSR(1) is 8, and
if the guest does an access at address offset 4 then
you'll drop through to here and set s->csr[0] without
the special case handling in the CSR(0) case.

> +        break;
> +    }
> +}
> +
> +static const MemoryRegionOps tulip_ops = {
> +    .read = tulip_read,
> +    .write = tulip_write,
> +    .endianness = DEVICE_LITTLE_ENDIAN,

Do you need to specify .impl.min_access_size ? Otherwise
you'll get byte and halfword accesses as well as word accesses
(which is fine if you want to handle them in the read/write
functions, but it looks like you aren't.)

> +};
> +
> +static void tulip_idblock_crc(TULIPState *s, uint16_t *srom)
> +{
> +    int word, n;
> +    char bit;
> +    unsigned char bitval, crc;
> +    const int len = 9;
> +    n = 0;
> +    crc = -1;
> +
> +    for (word = 0; word < len; word++) {
> +        for (bit = 15; bit >= 0; bit--) {
> +            if ((word == (len - 1)) && (bit == 7)) {
> +                /*
> +                 * Insert the correct CRC result into input data stream
> +                 * in place.
> +                 */
> +                srom[len - 1] = (srom[len - 1] & 0xff00) | (unsigned short)crc;
> +                break;
> +            }
> +            n++;
> +            bitval = ((srom[word] >> bit) & 1) ^ ((crc >> 7) & 1);
> +            crc = crc << 1;
> +            if (bitval == 1) {
> +                crc ^= 6;
> +                crc |= 0x01;
> +            }
> +        }
> +    }
> +}
> +
> +static uint16_t tulip_srom_crc(TULIPState *s, uint8_t *eeprom, size_t len)
> +{
> +    unsigned long crc = 0xffffffff;
> +    unsigned long flippedcrc = 0;
> +    unsigned char currentbyte;
> +    unsigned int msb, bit, i;
> +
> +    for (i = 0; i < len; i++) {
> +        currentbyte = eeprom[i];
> +        for (bit = 0; bit < 8; bit++) {
> +            msb = (crc >> 31) & 1;
> +            crc <<= 1;
> +            if (msb ^ (currentbyte & 1)) {
> +                crc ^= 0x04c11db6;
> +                crc |= 0x00000001;
> +            }
> +            currentbyte >>= 1;
> +        }
> +    }
> +
> +    for (i = 0; i < 32; i++) {
> +        flippedcrc <<= 1;
> +        bit = crc & 1;
> +        crc >>= 1;
> +        flippedcrc += bit;
> +    }
> +    return (flippedcrc ^ 0xffffffff) & 0xffff;
> +}
> +
> +static const uint8_t eeprom_default[128] = {
> +    0x3c, 0x10, 0x4f, 0x10, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x56, 0x08, 0x04, 0x01, 0x00, 0x80, 0x48, 0xb3,
> +    0x0e, 0xa7, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08,
> +    0x01, 0x8d, 0x03, 0x00, 0x00, 0x00, 0x00, 0x78,
> +    0xe0, 0x01, 0x00, 0x50, 0x00, 0x18, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe8, 0x6b,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
> +    0x48, 0xb3, 0x0e, 0xa7, 0x40, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +};
> +
> +static void tulip_fill_eeprom(TULIPState *s)
> +{
> +    uint16_t *eeprom = eeprom93xx_data(s->eeprom);
> +    memcpy(eeprom, eeprom_default, 128);
> +
> +    /* patch in our mac address */
> +    eeprom[10] = cpu_to_le16(s->c.macaddr.a[0] | (s->c.macaddr.a[1] << 8));
> +    eeprom[11] = cpu_to_le16(s->c.macaddr.a[2] | (s->c.macaddr.a[3] << 8));
> +    eeprom[12] = cpu_to_le16(s->c.macaddr.a[4] | (s->c.macaddr.a[5] << 8));
> +    tulip_idblock_crc(s, eeprom);
> +    eeprom[63] = cpu_to_le16(tulip_srom_crc(s, (uint8_t *)eeprom, 126));
> +}
> +
> +static void pci_tulip_realize(PCIDevice *pci_dev, Error **errp)
> +{
> +    TULIPState *s = DO_UPCAST(TULIPState, dev, pci_dev);
> +    uint8_t *pci_conf;
> +
> +    pci_conf = s->dev.config;
> +    pci_conf[PCI_INTERRUPT_PIN] = 1; /* interrupt pin A */
> +
> +    s->eeprom = eeprom93xx_new(&pci_dev->qdev, 64);
> +    memory_region_init_io(&s->io, OBJECT(&s->dev), &tulip_ops, s,
> +            "tulip-io", 128);
> +
> +    memory_region_init_io(&s->memory, OBJECT(&s->dev), &tulip_ops, s,
> +            "tulip-mem", 128);
> +
> +    pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
> +    pci_register_bar(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->memory);
> +
> +    s->irq = pci_allocate_irq(&s->dev);
> +
> +    qemu_macaddr_default_if_unset(&s->c.macaddr);
> +    tulip_fill_eeprom(s);
> +    tulip_reset(s);

Don't call reset in the realize function -- just set
the dc->reset pointer in the DeviceClass struct in
tulip_class_init(), and reset will be called for you.

> +
> +    s->nic = qemu_new_nic(&net_tulip_info, &s->c,
> +                          object_get_typename(OBJECT(pci_dev)),
> +                          pci_dev->qdev.id, s);
> +    qemu_format_nic_info_str(qemu_get_queue(s->nic), s->c.macaddr.a);
> +    tulip_reset(s);

...reset called again here?

> +}
> +
> +static void pci_tulip_exit(PCIDevice *pci_dev)
> +{
> +    TULIPState *s = DO_UPCAST(TULIPState, dev, pci_dev);
> +
> +    qemu_del_nic(s->nic);
> +    qemu_free_irq(s->irq);
> +    eeprom93xx_free(&pci_dev->qdev, s->eeprom);
> +}
> +
> +static void tulip_instance_init(Object *obj)
> +{
> +    PCIDevice *pci_dev = PCI_DEVICE(obj);
> +    TULIPState *d = DO_UPCAST(TULIPState, dev, pci_dev);
> +
> +    device_add_bootindex_property(obj, &d->c.bootindex,
> +                                  "bootindex", "/ethernet-phy@0",
> +                                  &pci_dev->qdev, NULL);
> +}
> +
> +static Property tulip_properties[] = {
> +    DEFINE_NIC_PROPERTIES(TULIPState, c),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void tulip_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> +
> +    k->realize = pci_tulip_realize;
> +    k->exit = pci_tulip_exit;
> +    k->vendor_id = PCI_VENDOR_ID_DEC;
> +    k->device_id = PCI_DEVICE_ID_DEC_21143;
> +    k->subsystem_vendor_id = 0x103c;
> +    k->subsystem_id = 0x104f;
> +    k->class_id = PCI_CLASS_NETWORK_ETHERNET;
> +    dc->vmsd = &vmstate_pci_tulip;
> +    dc->props = tulip_properties;
> +    set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
> +}
> +
> +static const TypeInfo tulip_info = {
> +    .name          = "tulip",
> +    .parent        = TYPE_PCI_DEVICE,
> +    .instance_size = sizeof(TULIPState),
> +    .class_init    = tulip_class_init,
> +    .instance_init = tulip_instance_init,
> +    .interfaces = (InterfaceInfo[]) {
> +        { INTERFACE_CONVENTIONAL_PCI_DEVICE },
> +        { },
> +    },
> +};

thanks
-- PMM
Peter Maydell Oct. 22, 2019, 12:02 p.m. UTC | #3
On Tue, 22 Oct 2019 at 04:30, Jason Wang <jasowang@redhat.com> wrote:
>
>
> On 2019/10/20 上午1:38, Sven Schnelle wrote:
> > This adds the basic functionality to emulate a Tulip NIC.
> >
> > Implemented are:
> >
> > - RX and TX functionality
> > - Perfect Frame Filtering
> > - Big/Little Endian descriptor support
> > - 93C46 EEPROM support
> > - LXT970 PHY
> >
> > Not implemented, mostly because i had no OS using these functions:
> >
> > - Imperfect frame filtering
> > - General Purpose Timer
> > - Transmit automatic polling
> > - Boot ROM support
> > - SIA interface
> > - Big/Little Endian data buffer conversion
> >
> > Successfully tested with the following Operating Systems:
> >
> > - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
> > - HPPA Linux
> > - Windows XP
> > - HP-UX
> >
> > Signed-off-by: Sven Schnelle<svens@stackframe.org>
> > ---
>
>
> Applied.

Hi Jason; I just sent some code review comments on this patch
so you might want to hold off on applying it for now.

thanks
-- PMM
Jason Wang Oct. 23, 2019, 3:32 a.m. UTC | #4
On 2019/10/22 下午8:02, Peter Maydell wrote:
> On Tue, 22 Oct 2019 at 04:30, Jason Wang<jasowang@redhat.com>  wrote:
>> On 2019/10/20 上午1:38, Sven Schnelle wrote:
>>> This adds the basic functionality to emulate a Tulip NIC.
>>>
>>> Implemented are:
>>>
>>> - RX and TX functionality
>>> - Perfect Frame Filtering
>>> - Big/Little Endian descriptor support
>>> - 93C46 EEPROM support
>>> - LXT970 PHY
>>>
>>> Not implemented, mostly because i had no OS using these functions:
>>>
>>> - Imperfect frame filtering
>>> - General Purpose Timer
>>> - Transmit automatic polling
>>> - Boot ROM support
>>> - SIA interface
>>> - Big/Little Endian data buffer conversion
>>>
>>> Successfully tested with the following Operating Systems:
>>>
>>> - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
>>> - HPPA Linux
>>> - Windows XP
>>> - HP-UX
>>>
>>> Signed-off-by: Sven Schnelle<svens@stackframe.org>
>>> ---
>> Applied.
> Hi Jason; I just sent some code review comments on this patch
> so you might want to hold off on applying it for now.
>
> thanks
> -- PMM
>

Sure.

Thanks
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 250ce8e7a1..a12031c389 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1638,6 +1638,12 @@  M: Stefan Weil <sw@weilnetz.de>
 S: Maintained
 F: hw/net/eepro100.c
 
+tulip
+M: Sven Schnelle <svens@stackframe.org>
+S: Maintained
+F: hw/net/tulip.c
+F: hw/net/tulip.h
+
 Generic Loader
 M: Alistair Francis <alistair@alistair23.me>
 S: Maintained
diff --git a/hw/net/Kconfig b/hw/net/Kconfig
index 4ef86dc3a5..3856417d42 100644
--- a/hw/net/Kconfig
+++ b/hw/net/Kconfig
@@ -24,6 +24,11 @@  config PCNET_PCI
 config PCNET_COMMON
     bool
 
+config TULIP
+    bool
+    default y if PCI_DEVICES
+    depends on PCI
+
 config E1000_PCI
     bool
     default y if PCI_DEVICES
diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
index 9904273b06..7907d2c199 100644
--- a/hw/net/Makefile.objs
+++ b/hw/net/Makefile.objs
@@ -13,6 +13,7 @@  common-obj-$(CONFIG_E1000E_PCI_EXPRESS) += e1000e.o e1000e_core.o e1000x_common.
 common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
 common-obj-$(CONFIG_VMXNET3_PCI) += net_tx_pkt.o net_rx_pkt.o
 common-obj-$(CONFIG_VMXNET3_PCI) += vmxnet3.o
+common-obj-$(CONFIG_TULIP) += tulip.o
 
 common-obj-$(CONFIG_SMC91C111) += smc91c111.o
 common-obj-$(CONFIG_LAN9118) += lan9118.o
diff --git a/hw/net/trace-events b/hw/net/trace-events
index 58665655cc..e70f12bee1 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -367,3 +367,17 @@  virtio_net_announce_notify(void) ""
 virtio_net_announce_timer(int round) "%d"
 virtio_net_handle_announce(int round) "%d"
 virtio_net_post_load_device(void)
+
+# tulip.c
+tulip_reg_write(uint64_t addr, const char *name, int size, uint64_t val) "addr 0x%02"PRIx64" (%s) size %d value 0x%08"PRIx64
+tulip_reg_read(uint64_t addr, const char *name, int size, uint64_t val) "addr 0x%02"PRIx64" (%s) size %d value 0x%08"PRIx64
+tulip_receive(const uint8_t *buf, size_t len) "buf %p size %zu"
+tulip_descriptor(const char *prefix, uint32_t addr, uint32_t status, uint32_t control, uint32_t len1, uint32_t len2, uint32_t buf1, uint32_t buf2) "%s 0x%08x: status 0x%08x control 0x%03x len1 %4d len2 %4d buf1 0x%08x buf2 0x%08x"
+tulip_rx_state(const char *state) "RX %s"
+tulip_tx_state(const char *state) "TX %s"
+tulip_irq(uint32_t mask, uint32_t en, const char *state) "mask 0x%08x ie 0x%08x %s"
+tulip_mii_write(int phy, int reg, uint16_t data) "phy 0x%x reg 0x%x data 0x%04x"
+tulip_mii_read(int phy, int reg, uint16_t data) "phy 0x%x, reg 0x%x data 0x%04x"
+tulip_reset(void) ""
+tulip_setup_frame(void) ""
+tulip_setup_filter(int n, uint8_t a, uint8_t b, uint8_t c, uint8_t d, uint8_t e, uint8_t f) "%d: %02x:%02x:%02x:%02x:%02x:%02x"
diff --git a/hw/net/tulip.c b/hw/net/tulip.c
new file mode 100644
index 0000000000..a99b1b81c4
--- /dev/null
+++ b/hw/net/tulip.c
@@ -0,0 +1,992 @@ 
+/*
+ * QEMU TULIP Emulation
+ *
+ * Copyright (c) 2019 Sven Schnelle <svens@stackframe.org>
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/irq.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "hw/nvram/eeprom93xx.h"
+#include "migration/vmstate.h"
+#include "sysemu/sysemu.h"
+#include "tulip.h"
+#include "trace.h"
+#include "net/eth.h"
+
+typedef struct TULIPState {
+    PCIDevice dev;
+    MemoryRegion io;
+    MemoryRegion memory;
+    NICConf c;
+    qemu_irq irq;
+    NICState *nic;
+    eeprom_t *eeprom;
+    uint32_t csr[16];
+
+    /* state for MII */
+    uint32_t old_csr9;
+    uint32_t mii_word;
+    uint32_t mii_bitcnt;
+
+    hwaddr current_rx_desc;
+    hwaddr current_tx_desc;
+
+    uint8_t rx_frame[2048];
+    uint8_t tx_frame[2048];
+    uint16_t tx_frame_len;
+    uint16_t rx_frame_len;
+    uint16_t rx_frame_size;
+
+    uint32_t rx_status;
+    uint8_t filter[16][6];
+} TULIPState;
+
+static const VMStateDescription vmstate_pci_tulip = {
+    .name = "tulip",
+    .fields = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(dev, TULIPState),
+        VMSTATE_UINT32_ARRAY(csr, TULIPState, 16),
+        VMSTATE_UINT32(old_csr9, TULIPState),
+        VMSTATE_UINT32(mii_word, TULIPState),
+        VMSTATE_UINT32(mii_bitcnt, TULIPState),
+        VMSTATE_UINT64(current_rx_desc, TULIPState),
+        VMSTATE_UINT64(current_tx_desc, TULIPState),
+        VMSTATE_BUFFER(rx_frame, TULIPState),
+        VMSTATE_BUFFER(tx_frame, TULIPState),
+        VMSTATE_UINT16(rx_frame_len, TULIPState),
+        VMSTATE_UINT16(tx_frame_len, TULIPState),
+        VMSTATE_UINT16(rx_frame_size, TULIPState),
+        VMSTATE_UINT32(rx_status, TULIPState),
+        VMSTATE_UINT8_2DARRAY(filter, TULIPState, 16, 6),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void tulip_desc_read(TULIPState *s, hwaddr p, void *buf)
+{
+        int i;
+
+        if (s->csr[0] & CSR0_DBO) {
+            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
+                ((uint32_t *)buf)[i] = ldl_be_pci_dma(&s->dev, p + (i << 2));
+            }
+        } else {
+            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
+                ((uint32_t *)buf)[i] = ldl_le_pci_dma(&s->dev, p + (i << 2));
+            }
+        }
+}
+
+static void tulip_desc_write(TULIPState *s, hwaddr p, const void *buf)
+{
+        int i;
+
+        if (s->csr[0] & CSR0_DBO) {
+            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
+                stl_be_pci_dma(&s->dev, p + (i << 2), ((uint32_t *)buf)[i]);
+            }
+        } else {
+            for (i = 0; i < sizeof(struct tulip_descriptor) / 4; i++) {
+                stl_le_pci_dma(&s->dev, p + (i << 2), ((uint32_t *)buf)[i]);
+            }
+        }
+}
+
+static void tulip_update_int(TULIPState *s)
+{
+    uint32_t ie = s->csr[5] & s->csr[7];
+    bool assert = false;
+
+    s->csr[5] &= ~(CSR5_AIS | CSR5_NIS);
+
+    if (ie & (CSR5_TI | CSR5_TU | CSR5_RI | CSR5_GTE | CSR5_ERI)) {
+        s->csr[5] |= CSR5_NIS;
+    }
+
+    if (ie & (CSR5_LC | CSR5_GPI | CSR5_FBE | CSR5_LNF | CSR5_ETI | CSR5_RWT |
+              CSR5_RPS | CSR5_RU | CSR5_UNF | CSR5_LNP_ANC | CSR5_TJT |
+              CSR5_TPS)) {
+        s->csr[5] |= CSR5_AIS;
+    }
+
+    assert = s->csr[5] & s->csr[7] & (CSR5_AIS | CSR5_NIS);
+    trace_tulip_irq(s->csr[5], s->csr[7], assert ? "assert" : "deassert");
+    qemu_set_irq(s->irq, assert);
+}
+
+static bool tulip_rx_stopped(TULIPState *s)
+{
+    return ((s->csr[5] >> CSR5_RS_SHIFT) & CSR5_RS_MASK) == CSR5_RS_STOPPED;
+}
+
+static void tulip_dump_tx_descriptor(TULIPState *s,
+        struct tulip_descriptor *desc)
+{
+    trace_tulip_descriptor("TX ", s->current_tx_desc,
+                desc->status, desc->control >> 22,
+                desc->control & 0x7ff, (desc->control >> 11) & 0x7ff,
+                desc->buf_addr1, desc->buf_addr2);
+}
+
+static void tulip_dump_rx_descriptor(TULIPState *s,
+        struct tulip_descriptor *desc)
+{
+    trace_tulip_descriptor("RX ", s->current_rx_desc,
+                desc->status, desc->control >> 22,
+                desc->control & 0x7ff, (desc->control >> 11) & 0x7ff,
+                desc->buf_addr1, desc->buf_addr2);
+}
+
+static void tulip_next_rx_descriptor(TULIPState *s,
+    struct tulip_descriptor *desc)
+{
+    if (desc->control & RDES1_RER) {
+        s->current_rx_desc = s->csr[3];
+    } else if (desc->control & RDES1_RCH) {
+        s->current_rx_desc = desc->buf_addr2;
+    } else {
+        s->current_rx_desc += sizeof(struct tulip_descriptor) +
+                (((s->csr[0] >> CSR0_DSL_SHIFT) & CSR0_DSL_MASK) << 2);
+    }
+    s->current_rx_desc &= ~3ULL;
+}
+
+static void tulip_copy_rx_bytes(TULIPState *s, struct tulip_descriptor *desc)
+{
+    int len1 = (desc->control >> RDES1_BUF1_SIZE_SHIFT) & RDES1_BUF1_SIZE_MASK;
+    int len2 = (desc->control >> RDES1_BUF2_SIZE_SHIFT) & RDES1_BUF2_SIZE_MASK;
+    int len;
+
+    if (s->rx_frame_len && len1) {
+        if (s->rx_frame_len > len1) {
+            len = len1;
+        } else {
+            len = s->rx_frame_len;
+        }
+        pci_dma_write(&s->dev, desc->buf_addr1, s->rx_frame +
+            (s->rx_frame_size - s->rx_frame_len), len);
+        s->rx_frame_len -= len;
+    }
+
+    if (s->rx_frame_len && len2) {
+        if (s->rx_frame_len > len2) {
+            len = len2;
+        } else {
+            len = s->rx_frame_len;
+        }
+        pci_dma_write(&s->dev, desc->buf_addr2, s->rx_frame +
+            (s->rx_frame_size - s->rx_frame_len), len);
+        s->rx_frame_len -= len;
+    }
+}
+
+static bool tulip_filter_address(TULIPState *s, const uint8_t *addr)
+{
+    static const char broadcast[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+    bool ret = false;
+    int i;
+
+    for (i = 0; i < 16 && ret == false; i++) {
+        if (!memcmp(&s->filter[i], addr, ETH_ALEN)) {
+            ret = true;
+        }
+    }
+
+    if (!memcmp(addr, broadcast, ETH_ALEN)) {
+        return true;
+    }
+
+    if (s->csr[6] & (CSR6_PR | CSR6_RA)) {
+        /* Promiscuous mode enabled */
+        s->rx_status |= RDES0_FF;
+        return true;
+    }
+
+    if ((s->csr[6] & CSR6_PM) && (addr[0] & 1)) {
+        /* Pass all Multicast enabled */
+        s->rx_status |= RDES0_MF;
+        return true;
+    }
+
+    if (s->csr[6] & CSR6_IF) {
+        ret ^= true;
+    }
+    return ret;
+}
+
+static ssize_t _tulip_receive(TULIPState *s, const uint8_t *buf, size_t size)
+{
+    struct tulip_descriptor desc;
+
+    trace_tulip_receive(buf, size);
+
+    if (size < 14 || size > 2048 || s->rx_frame_len || tulip_rx_stopped(s)) {
+        return 0;
+    }
+
+    if (!tulip_filter_address(s, buf)) {
+        return size;
+    }
+
+    do {
+        tulip_desc_read(s, s->current_rx_desc, &desc);
+        tulip_dump_rx_descriptor(s, &desc);
+
+        if (!(desc.status & RDES0_OWN)) {
+            s->csr[5] |= CSR5_RU;
+            tulip_update_int(s);
+            return s->rx_frame_size - s->rx_frame_len;
+        }
+        desc.status = 0;
+
+        if (!s->rx_frame_len) {
+            s->rx_frame_size = size + 4;
+            s->rx_status = RDES0_LS |
+                 ((s->rx_frame_size & RDES0_FL_MASK) << RDES0_FL_SHIFT);
+            desc.status |= RDES0_FS;
+            memcpy(s->rx_frame, buf, size);
+            s->rx_frame_len = s->rx_frame_size;
+        }
+
+        tulip_copy_rx_bytes(s, &desc);
+
+        if (!s->rx_frame_len) {
+            desc.status |= s->rx_status;
+            s->csr[5] |= CSR5_RI;
+            tulip_update_int(s);
+        }
+        tulip_dump_rx_descriptor(s, &desc);
+        tulip_desc_write(s, s->current_rx_desc, &desc);
+        tulip_next_rx_descriptor(s, &desc);
+    } while (s->rx_frame_len);
+    return size;
+}
+
+static ssize_t tulip_receive(NetClientState *nc,
+                             const uint8_t *buf, size_t size)
+{
+    return _tulip_receive(qemu_get_nic_opaque(nc), buf, size);
+}
+
+
+static NetClientInfo net_tulip_info = {
+    .type = NET_CLIENT_DRIVER_NIC,
+    .size = sizeof(NICState),
+    .receive = tulip_receive,
+};
+
+static const char *tulip_reg_name(const hwaddr addr)
+{
+    switch (addr) {
+    case CSR(0):
+        return "CSR0";
+
+    case CSR(1):
+        return "CSR1";
+
+    case CSR(2):
+        return "CSR2";
+
+    case CSR(3):
+        return "CSR3";
+
+    case CSR(4):
+        return "CSR4";
+
+    case CSR(5):
+        return "CSR5";
+
+    case CSR(6):
+        return "CSR6";
+
+    case CSR(7):
+        return "CSR7";
+
+    case CSR(8):
+        return "CSR8";
+
+    case CSR(9):
+        return "CSR9";
+
+    case CSR(10):
+        return "CSR10";
+
+    case CSR(11):
+        return "CSR11";
+
+    case CSR(12):
+        return "CSR12";
+
+    case CSR(13):
+        return "CSR13";
+
+    case CSR(14):
+        return "CSR14";
+
+    case CSR(15):
+        return "CSR15";
+
+    default:
+        break;
+    }
+    return "";
+}
+
+static const char *tulip_rx_state_name(int state)
+{
+    switch (state) {
+    case CSR5_RS_STOPPED:
+        return "STOPPED";
+
+    case CSR5_RS_RUNNING_FETCH:
+        return "RUNNING/FETCH";
+
+    case CSR5_RS_RUNNING_CHECK_EOR:
+        return "RUNNING/CHECK EOR";
+
+    case CSR5_RS_RUNNING_WAIT_RECEIVE:
+        return "WAIT RECEIVE";
+
+    case CSR5_RS_SUSPENDED:
+        return "SUSPENDED";
+
+    case CSR5_RS_RUNNING_CLOSE:
+        return "RUNNING/CLOSE";
+
+    case CSR5_RS_RUNNING_FLUSH:
+        return "RUNNING/FLUSH";
+
+    case CSR5_RS_RUNNING_QUEUE:
+        return "RUNNING/QUEUE";
+
+    default:
+        break;
+    }
+    return "";
+}
+
+static const char *tulip_tx_state_name(int state)
+{
+    switch (state) {
+    case CSR5_TS_STOPPED:
+        return "STOPPED";
+
+    case CSR5_TS_RUNNING_FETCH:
+        return "RUNNING/FETCH";
+
+    case CSR5_TS_RUNNING_WAIT_EOT:
+        return "RUNNING/WAIT EOT";
+
+    case CSR5_TS_RUNNING_READ_BUF:
+        return "RUNNING/READ BUF";
+
+    case CSR5_TS_RUNNING_SETUP:
+        return "RUNNING/SETUP";
+
+    case CSR5_TS_SUSPENDED:
+        return "SUSPENDED";
+
+    case CSR5_TS_RUNNING_CLOSE:
+        return "RUNNING/CLOSE";
+
+    default:
+        break;
+    }
+    return "";
+}
+
+static void tulip_update_rs(TULIPState *s, int state)
+{
+        s->csr[5] &= ~(CSR5_RS_MASK << CSR5_RS_SHIFT);
+        s->csr[5] |= (state & CSR5_RS_MASK) << CSR5_RS_SHIFT;
+        trace_tulip_rx_state(tulip_rx_state_name(state));
+}
+
+static uint16_t tulip_mdi_default[] = {
+    /* MDI Registers 0 - 6, 7 */
+    0x3100, 0xf02c, 0x7810, 0x0000, 0x0501, 0x4181, 0x0000, 0x0000,
+    /* MDI Registers 8 - 15 */
+    0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    /* MDI Registers 16 - 31 */
+    0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+/* Readonly mask for MDI (PHY) registers */
+static const uint16_t tulip_mdi_mask[] = {
+    0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000,
+    0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
+    0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static uint16_t tulip_mii_read(TULIPState *s, int phy, int reg)
+{
+    uint16_t ret = 0;
+    if (phy == 1) {
+        ret = tulip_mdi_default[reg];
+    }
+    trace_tulip_mii_read(phy, reg, ret);
+    return ret;
+}
+
+static void tulip_mii_write(TULIPState *s, int phy, int reg, uint16_t data)
+{
+    trace_tulip_mii_write(phy, reg, data);
+
+    if (phy != 1) {
+        return;
+    }
+
+    tulip_mdi_default[reg] &= ~tulip_mdi_mask[reg];
+    tulip_mdi_default[reg] |= (data & tulip_mdi_mask[reg]);
+}
+
+static void tulip_mii(TULIPState *s)
+{
+    uint32_t changed = s->old_csr9 ^ s->csr[9];
+    uint16_t data;
+    int op, phy, reg;
+
+    if (!(changed & CSR9_MDC)) {
+        return;
+    }
+
+    if (!(s->csr[9] & CSR9_MDC)) {
+        return;
+    }
+
+    s->mii_bitcnt++;
+    s->mii_word <<= 1;
+
+    if (s->csr[9] & CSR9_MDO && (s->mii_bitcnt < 16 ||
+        !(s->csr[9] & CSR9_MII))) {
+        /* write op or address bits */
+        s->mii_word |= 1;
+    }
+
+    if (s->mii_bitcnt >= 16 && (s->csr[9] & CSR9_MII)) {
+        if (s->mii_word & 0x8000) {
+            s->csr[9] |= CSR9_MDI;
+        } else {
+            s->csr[9] &= ~CSR9_MDI;
+        }
+    }
+
+    if (s->mii_word == 0xffffffff) {
+        s->mii_bitcnt = 0;
+    } else if (s->mii_bitcnt == 16) {
+        op = (s->mii_word >> 12) & 0x0f;
+        phy = (s->mii_word >> 7) & 0x1f;
+        reg = (s->mii_word >> 2) & 0x1f;
+
+        if (op == 6) {
+            s->mii_word = tulip_mii_read(s, phy, reg);
+        }
+    } else if (s->mii_bitcnt == 32) {
+            op = (s->mii_word >> 28) & 0x0f;
+            phy = (s->mii_word >> 23) & 0x1f;
+            reg = (s->mii_word >> 18) & 0x1f;
+            data = s->mii_word & 0xffff;
+
+        if (op == 5) {
+            tulip_mii_write(s, phy, reg, data);
+        }
+    }
+}
+
+static uint32_t tulip_csr9_read(TULIPState *s)
+{
+    if (s->csr[9] & CSR9_SR) {
+        if (eeprom93xx_read(s->eeprom)) {
+            s->csr[9] |= CSR9_SR_DO;
+        } else {
+            s->csr[9] &= ~CSR9_SR_DO;
+        }
+    }
+
+    tulip_mii(s);
+    return s->csr[9];
+}
+
+static void tulip_update_ts(TULIPState *s, int state)
+{
+        s->csr[5] &= ~(CSR5_TS_MASK << CSR5_TS_SHIFT);
+        s->csr[5] |= (state & CSR5_TS_MASK) << CSR5_TS_SHIFT;
+        trace_tulip_tx_state(tulip_tx_state_name(state));
+}
+
+static uint64_t tulip_read(void *opaque, hwaddr addr,
+                              unsigned size)
+{
+    TULIPState *s = opaque;
+    uint64_t data = 0;
+
+    if (addr > CSR(15)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: out of bound access\n", __func__);
+        return 0;
+    }
+
+
+    switch (addr) {
+    case CSR(9):
+        data = tulip_csr9_read(s);
+        break;
+
+    case CSR(12):
+        /* Fake autocompletion complete until we have PHY emulation */
+        data = 5 << CSR12_ANS_SHIFT;
+        break;
+    default:
+        data = s->csr[addr >> 3];
+        break;
+    }
+    trace_tulip_reg_read(addr, tulip_reg_name(addr), size, data);
+    return data;
+}
+
+static void tulip_tx(TULIPState *s, struct tulip_descriptor *desc)
+{
+    if (s->tx_frame_len) {
+        if ((s->csr[6] >> CSR6_OM_SHIFT) & CSR6_OM_MASK) {
+            /* Internal or external Loopback */
+            _tulip_receive(s, s->tx_frame, s->tx_frame_len);
+        } else {
+            qemu_send_packet(qemu_get_queue(s->nic),
+                s->tx_frame, s->tx_frame_len);
+        }
+    }
+
+    if (desc->control & TDES1_IC) {
+        s->csr[5] |= CSR5_TI;
+        tulip_update_int(s);
+    }
+}
+
+static void tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor *desc)
+{
+    int len1 = (desc->control >> TDES1_BUF1_SIZE_SHIFT) & TDES1_BUF1_SIZE_MASK;
+    int len2 = (desc->control >> TDES1_BUF2_SIZE_SHIFT) & TDES1_BUF2_SIZE_MASK;
+
+    if (len1) {
+        pci_dma_read(&s->dev, desc->buf_addr1,
+            s->tx_frame + s->tx_frame_len, len1);
+        s->tx_frame_len += len1;
+    }
+
+    if (len2) {
+        pci_dma_read(&s->dev, desc->buf_addr2,
+            s->tx_frame + s->tx_frame_len, len2);
+        s->tx_frame_len += len2;
+    }
+    desc->status = (len1 + len2) ? 0 : 0x7fffffff;
+}
+
+static void tulip_setup_filter_addr(TULIPState *s, uint8_t *buf, int n)
+{
+    int offset = n * 12;
+
+    s->filter[n][0] = buf[offset];
+    s->filter[n][1] = buf[offset + 1];
+
+    s->filter[n][2] = buf[offset + 4];
+    s->filter[n][3] = buf[offset + 5];
+
+    s->filter[n][4] = buf[offset + 8];
+    s->filter[n][5] = buf[offset + 9];
+
+    trace_tulip_setup_filter(n, s->filter[n][5], s->filter[n][4],
+            s->filter[n][3], s->filter[n][2], s->filter[n][1], s->filter[n][0]);
+}
+
+static void tulip_setup_frame(TULIPState *s,
+        struct tulip_descriptor *desc)
+{
+    uint8_t buf[4096];
+    int len = (desc->control >> TDES1_BUF1_SIZE_SHIFT) & TDES1_BUF1_SIZE_MASK;
+    int i;
+
+    trace_tulip_setup_frame();
+
+    if (len == 192) {
+        pci_dma_read(&s->dev, desc->buf_addr1, buf, len);
+        for (i = 0; i < 16; i++) {
+            tulip_setup_filter_addr(s, buf, i);
+        }
+    }
+
+    desc->status = 0x7fffffff;
+
+    if (desc->control & TDES1_IC) {
+        s->csr[5] |= CSR5_TI;
+        tulip_update_int(s);
+    }
+}
+
+static void tulip_next_tx_descriptor(TULIPState *s,
+    struct tulip_descriptor *desc)
+{
+    if (desc->control & TDES1_TER) {
+        s->current_tx_desc = s->csr[4];
+    } else if (desc->control & TDES1_TCH) {
+        s->current_tx_desc = desc->buf_addr2;
+    } else {
+        s->current_tx_desc += sizeof(struct tulip_descriptor) +
+                (((s->csr[0] >> CSR0_DSL_SHIFT) & CSR0_DSL_MASK) << 2);
+    }
+    s->current_tx_desc &= ~3ULL;
+}
+
+static void tulip_xmit_list_update(TULIPState *s)
+{
+    struct tulip_descriptor desc;
+
+    for (;;) {
+        tulip_desc_read(s, s->current_tx_desc, &desc);
+        tulip_dump_tx_descriptor(s, &desc);
+
+        if (!(desc.status & TDES0_OWN)) {
+            tulip_update_ts(s, CSR5_TS_SUSPENDED);
+            s->csr[5] |= CSR5_TU;
+            tulip_update_int(s);
+            return;
+        }
+
+        if (desc.control & TDES1_SET) {
+            tulip_setup_frame(s, &desc);
+        } else {
+            if (desc.control & TDES1_FS) {
+                s->tx_frame_len = 0;
+            }
+
+            tulip_copy_tx_buffers(s, &desc);
+
+            if (desc.control & TDES1_LS) {
+                tulip_tx(s, &desc);
+            }
+        }
+        tulip_desc_write(s, s->current_tx_desc, &desc);
+        tulip_next_tx_descriptor(s, &desc);
+    }
+}
+
+static void tulip_csr9_write(TULIPState *s, uint32_t old_val,
+        uint32_t new_val)
+{
+    if (new_val & CSR9_SR) {
+        eeprom93xx_write(s->eeprom,
+            !!(new_val & CSR9_SR_CS),
+            !!(new_val & CSR9_SR_SK),
+            !!(new_val & CSR9_SR_DI));
+    }
+}
+
+static uint32_t tulip_ts(TULIPState *s)
+{
+    return (s->csr[5] >> CSR5_TS_SHIFT) & CSR5_TS_MASK;
+}
+
+static void tulip_reset(TULIPState *s)
+{
+    trace_tulip_reset();
+
+    s->csr[0] = 0xfe000000;
+    s->csr[1] = 0xffffffff;
+    s->csr[2] = 0xffffffff;
+    s->csr[5] = 0xf0000000;
+    s->csr[6] = 0x32000040;
+    s->csr[7] = 0xf3fe0000;
+    s->csr[8] = 0xe0000000;
+    s->csr[9] = 0xfff483ff;
+    s->csr[11] = 0xfffe0000;
+    s->csr[12] = 0x000000c6;
+    s->csr[13] = 0xffff0000;
+    s->csr[14] = 0xffffffff;
+    s->csr[15] = 0x8ff00000;
+    tulip_update_int(s);
+}
+
+static void tulip_write(void *opaque, hwaddr addr,
+                           uint64_t data, unsigned size)
+{
+    TULIPState *s = opaque;
+    trace_tulip_reg_write(addr, tulip_reg_name(addr), size, data);
+
+    if (addr > CSR(15)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: out of bound access\n", __func__);
+        return;
+    }
+
+
+    switch (addr) {
+    case CSR(0):
+        s->csr[0] = data;
+        if (data & CSR0_SWR) {
+            tulip_reset(s);
+        }
+        break;
+
+    case CSR(3):
+        s->csr[3] = data & ~3ULL;
+        s->current_rx_desc = s->csr[3];
+            /* fall through */
+
+    case CSR(2):
+        qemu_flush_queued_packets(qemu_get_queue(s->nic));
+        break;
+
+    case CSR(4):
+        s->csr[4] = data & ~3ULL;
+        s->current_tx_desc = s->csr[4];
+            /* fall through */
+
+    case CSR(1):
+        if (tulip_ts(s) == CSR5_TS_SUSPENDED) {
+            tulip_xmit_list_update(s);
+        }
+        break;
+
+    case CSR(5):
+        /* Status register, write clears bit */
+        s->csr[5] &= ~(data & (CSR5_TI | CSR5_TPS | CSR5_TU | CSR5_TJT |
+                               CSR5_LNP_ANC | CSR5_UNF | CSR5_RI | CSR5_RU |
+                               CSR5_RPS | CSR5_RWT | CSR5_ETI | CSR5_GTE |
+                               CSR5_LNF | CSR5_FBE | CSR5_ERI | CSR5_AIS |
+                               CSR5_NIS | CSR5_GPI | CSR5_LC));
+        tulip_update_int(s);
+        break;
+
+    case CSR(6):
+        s->csr[6] = data;
+        if (s->csr[6] & CSR6_SR) {
+            tulip_update_rs(s, CSR5_RS_RUNNING_WAIT_RECEIVE);
+            qemu_flush_queued_packets(qemu_get_queue(s->nic));
+        } else {
+            tulip_update_rs(s, CSR5_RS_STOPPED);
+        }
+
+        if (s->csr[6] & CSR6_ST) {
+            tulip_update_ts(s, CSR5_TS_SUSPENDED);
+            tulip_xmit_list_update(s);
+        } else {
+            tulip_update_ts(s, CSR5_TS_STOPPED);
+        }
+        break;
+
+    case CSR(7):
+        s->csr[7] = data;
+        tulip_update_int(s);
+        break;
+
+    case CSR(9):
+        tulip_csr9_write(s, s->csr[9], data);
+        /* don't clear MII read data */
+        s->csr[9] &= CSR9_MDI;
+        s->csr[9] |= (data & ~CSR9_MDI);
+        tulip_mii(s);
+        s->old_csr9 = s->csr[9];
+        break;
+
+    case CSR(12):
+        /* SIA Status register, some bits are cleared by writing 1 */
+        s->csr[12] &= ~(data & (CSR12_MRA | CSR12_TRA | CSR12_ARA));
+        break;
+
+    default:
+        s->csr[addr >> 3] = data;
+        break;
+    }
+}
+
+static const MemoryRegionOps tulip_ops = {
+    .read = tulip_read,
+    .write = tulip_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void tulip_idblock_crc(TULIPState *s, uint16_t *srom)
+{
+    int word, n;
+    char bit;
+    unsigned char bitval, crc;
+    const int len = 9;
+    n = 0;
+    crc = -1;
+
+    for (word = 0; word < len; word++) {
+        for (bit = 15; bit >= 0; bit--) {
+            if ((word == (len - 1)) && (bit == 7)) {
+                /*
+                 * Insert the correct CRC result into input data stream
+                 * in place.
+                 */
+                srom[len - 1] = (srom[len - 1] & 0xff00) | (unsigned short)crc;
+                break;
+            }
+            n++;
+            bitval = ((srom[word] >> bit) & 1) ^ ((crc >> 7) & 1);
+            crc = crc << 1;
+            if (bitval == 1) {
+                crc ^= 6;
+                crc |= 0x01;
+            }
+        }
+    }
+}
+
+static uint16_t tulip_srom_crc(TULIPState *s, uint8_t *eeprom, size_t len)
+{
+    unsigned long crc = 0xffffffff;
+    unsigned long flippedcrc = 0;
+    unsigned char currentbyte;
+    unsigned int msb, bit, i;
+
+    for (i = 0; i < len; i++) {
+        currentbyte = eeprom[i];
+        for (bit = 0; bit < 8; bit++) {
+            msb = (crc >> 31) & 1;
+            crc <<= 1;
+            if (msb ^ (currentbyte & 1)) {
+                crc ^= 0x04c11db6;
+                crc |= 0x00000001;
+            }
+            currentbyte >>= 1;
+        }
+    }
+
+    for (i = 0; i < 32; i++) {
+        flippedcrc <<= 1;
+        bit = crc & 1;
+        crc >>= 1;
+        flippedcrc += bit;
+    }
+    return (flippedcrc ^ 0xffffffff) & 0xffff;
+}
+
+static const uint8_t eeprom_default[128] = {
+    0x3c, 0x10, 0x4f, 0x10, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x56, 0x08, 0x04, 0x01, 0x00, 0x80, 0x48, 0xb3,
+    0x0e, 0xa7, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08,
+    0x01, 0x8d, 0x03, 0x00, 0x00, 0x00, 0x00, 0x78,
+    0xe0, 0x01, 0x00, 0x50, 0x00, 0x18, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe8, 0x6b,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+    0x48, 0xb3, 0x0e, 0xa7, 0x40, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static void tulip_fill_eeprom(TULIPState *s)
+{
+    uint16_t *eeprom = eeprom93xx_data(s->eeprom);
+    memcpy(eeprom, eeprom_default, 128);
+
+    /* patch in our mac address */
+    eeprom[10] = cpu_to_le16(s->c.macaddr.a[0] | (s->c.macaddr.a[1] << 8));
+    eeprom[11] = cpu_to_le16(s->c.macaddr.a[2] | (s->c.macaddr.a[3] << 8));
+    eeprom[12] = cpu_to_le16(s->c.macaddr.a[4] | (s->c.macaddr.a[5] << 8));
+    tulip_idblock_crc(s, eeprom);
+    eeprom[63] = cpu_to_le16(tulip_srom_crc(s, (uint8_t *)eeprom, 126));
+}
+
+static void pci_tulip_realize(PCIDevice *pci_dev, Error **errp)
+{
+    TULIPState *s = DO_UPCAST(TULIPState, dev, pci_dev);
+    uint8_t *pci_conf;
+
+    pci_conf = s->dev.config;
+    pci_conf[PCI_INTERRUPT_PIN] = 1; /* interrupt pin A */
+
+    s->eeprom = eeprom93xx_new(&pci_dev->qdev, 64);
+    memory_region_init_io(&s->io, OBJECT(&s->dev), &tulip_ops, s,
+            "tulip-io", 128);
+
+    memory_region_init_io(&s->memory, OBJECT(&s->dev), &tulip_ops, s,
+            "tulip-mem", 128);
+
+    pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
+    pci_register_bar(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->memory);
+
+    s->irq = pci_allocate_irq(&s->dev);
+
+    qemu_macaddr_default_if_unset(&s->c.macaddr);
+    tulip_fill_eeprom(s);
+    tulip_reset(s);
+
+    s->nic = qemu_new_nic(&net_tulip_info, &s->c,
+                          object_get_typename(OBJECT(pci_dev)),
+                          pci_dev->qdev.id, s);
+    qemu_format_nic_info_str(qemu_get_queue(s->nic), s->c.macaddr.a);
+    tulip_reset(s);
+}
+
+static void pci_tulip_exit(PCIDevice *pci_dev)
+{
+    TULIPState *s = DO_UPCAST(TULIPState, dev, pci_dev);
+
+    qemu_del_nic(s->nic);
+    qemu_free_irq(s->irq);
+    eeprom93xx_free(&pci_dev->qdev, s->eeprom);
+}
+
+static void tulip_instance_init(Object *obj)
+{
+    PCIDevice *pci_dev = PCI_DEVICE(obj);
+    TULIPState *d = DO_UPCAST(TULIPState, dev, pci_dev);
+
+    device_add_bootindex_property(obj, &d->c.bootindex,
+                                  "bootindex", "/ethernet-phy@0",
+                                  &pci_dev->qdev, NULL);
+}
+
+static Property tulip_properties[] = {
+    DEFINE_NIC_PROPERTIES(TULIPState, c),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void tulip_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->realize = pci_tulip_realize;
+    k->exit = pci_tulip_exit;
+    k->vendor_id = PCI_VENDOR_ID_DEC;
+    k->device_id = PCI_DEVICE_ID_DEC_21143;
+    k->subsystem_vendor_id = 0x103c;
+    k->subsystem_id = 0x104f;
+    k->class_id = PCI_CLASS_NETWORK_ETHERNET;
+    dc->vmsd = &vmstate_pci_tulip;
+    dc->props = tulip_properties;
+    set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
+}
+
+static const TypeInfo tulip_info = {
+    .name          = "tulip",
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(TULIPState),
+    .class_init    = tulip_class_init,
+    .instance_init = tulip_instance_init,
+    .interfaces = (InterfaceInfo[]) {
+        { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+        { },
+    },
+};
+
+static void tulip_register_types(void)
+{
+    type_register_static(&tulip_info);
+}
+
+type_init(tulip_register_types)
diff --git a/hw/net/tulip.h b/hw/net/tulip.h
new file mode 100644
index 0000000000..51028b0292
--- /dev/null
+++ b/hw/net/tulip.h
@@ -0,0 +1,265 @@ 
+#ifndef HW_TULIP_H
+#define HW_TULIP_H
+
+#include "qemu/units.h"
+#include "net/net.h"
+
+#define CSR(_x) ((_x) << 3)
+
+#define CSR0_SWR        BIT(0)
+#define CSR0_BAR        BIT(1)
+#define CSR0_DSL_SHIFT  2
+#define CSR0_DSL_MASK   0x1f
+#define CSR0_BLE        BIT(7)
+#define CSR0_PBL_SHIFT  8
+#define CSR0_PBL_MASK   0x3f
+#define CSR0_CAC_SHIFT  14
+#define CSR0_CAC_MASK   0x3
+#define CSR0_DAS        0x10000
+#define CSR0_TAP_SHIFT  17
+#define CSR0_TAP_MASK   0x7
+#define CSR0_DBO        0x100000
+#define CSR1_TPD        0x01
+#define CSR0_RLE        BIT(23)
+#define CSR0_WIE        BIT(24)
+
+#define CSR2_RPD        0x01
+
+#define CSR5_TI         BIT(0)
+#define CSR5_TPS        BIT(1)
+#define CSR5_TU         BIT(2)
+#define CSR5_TJT        BIT(3)
+#define CSR5_LNP_ANC    BIT(4)
+#define CSR5_UNF        BIT(5)
+#define CSR5_RI         BIT(6)
+#define CSR5_RU         BIT(7)
+#define CSR5_RPS        BIT(8)
+#define CSR5_RWT        BIT(9)
+#define CSR5_ETI        BIT(10)
+#define CSR5_GTE        BIT(11)
+#define CSR5_LNF        BIT(12)
+#define CSR5_FBE        BIT(13)
+#define CSR5_ERI        BIT(14)
+#define CSR5_AIS        BIT(15)
+#define CSR5_NIS        BIT(16)
+#define CSR5_RS_SHIFT   17
+#define CSR5_RS_MASK    7
+#define CSR5_TS_SHIFT   20
+#define CSR5_TS_MASK    7
+
+#define CSR5_TS_STOPPED                 0
+#define CSR5_TS_RUNNING_FETCH           1
+#define CSR5_TS_RUNNING_WAIT_EOT        2
+#define CSR5_TS_RUNNING_READ_BUF        3
+#define CSR5_TS_RUNNING_SETUP           5
+#define CSR5_TS_SUSPENDED               6
+#define CSR5_TS_RUNNING_CLOSE           7
+
+#define CSR5_RS_STOPPED                 0
+#define CSR5_RS_RUNNING_FETCH           1
+#define CSR5_RS_RUNNING_CHECK_EOR       2
+#define CSR5_RS_RUNNING_WAIT_RECEIVE    3
+#define CSR5_RS_SUSPENDED               4
+#define CSR5_RS_RUNNING_CLOSE           5
+#define CSR5_RS_RUNNING_FLUSH           6
+#define CSR5_RS_RUNNING_QUEUE           7
+
+#define CSR5_EB_SHIFT   23
+#define CSR5_EB_MASK    7
+
+#define CSR5_GPI        BIT(26)
+#define CSR5_LC         BIT(27)
+
+#define CSR6_HP         BIT(0)
+#define CSR6_SR         BIT(1)
+#define CSR6_HO         BIT(2)
+#define CSR6_PB         BIT(3)
+#define CSR6_IF         BIT(4)
+#define CSR6_SB         BIT(5)
+#define CSR6_PR         BIT(6)
+#define CSR6_PM         BIT(7)
+#define CSR6_FKD        BIT(8)
+#define CSR6_FD         BIT(9)
+
+#define CSR6_OM_SHIFT   10
+#define CSR6_OM_MASK    3
+#define CSR6_OM_NORMAL          0
+#define CSR6_OM_INT_LOOPBACK    1
+#define CSR6_OM_EXT_LOOPBACK    2
+
+#define CSR6_FC         BIT(12)
+#define CSR6_ST         BIT(13)
+
+
+#define CSR6_TR_SHIFT   14
+#define CSR6_TR_MASK    3
+#define CSR6_TR_72      0
+#define CSR6_TR_96      1
+#define CSR6_TR_128     2
+#define CSR6_TR_160     3
+
+#define CSR6_CA         BIT(17)
+#define CSR6_RA         BIT(30)
+#define CSR6_SC         BIT(31)
+
+#define CSR7_TIM        BIT(0)
+#define CSR7_TSM        BIT(1)
+#define CSR7_TUM        BIT(2)
+#define CSR7_TJM        BIT(3)
+#define CSR7_LPM        BIT(4)
+#define CSR7_UNM        BIT(5)
+#define CSR7_RIM        BIT(6)
+#define CSR7_RUM        BIT(7)
+#define CSR7_RSM        BIT(8)
+#define CSR7_RWM        BIT(9)
+#define CSR7_TMM        BIT(11)
+#define CSR7_LFM        BIT(12)
+#define CSR7_SEM        BIT(13)
+#define CSR7_ERM        BIT(14)
+#define CSR7_AIM        BIT(15)
+#define CSR7_NIM        BIT(16)
+
+#define CSR8_MISSED_FRAME_OVL           BIT(16)
+#define CSR8_MISSED_FRAME_CNT_MASK      0xffff
+
+#define CSR9_DATA_MASK  0xff
+#define CSR9_SR_CS      BIT(0)
+#define CSR9_SR_SK      BIT(1)
+#define CSR9_SR_DI      BIT(2)
+#define CSR9_SR_DO      BIT(3)
+#define CSR9_REG        BIT(10)
+#define CSR9_SR         BIT(11)
+#define CSR9_BR         BIT(12)
+#define CSR9_WR         BIT(13)
+#define CSR9_RD         BIT(14)
+#define CSR9_MOD        BIT(15)
+#define CSR9_MDC        BIT(16)
+#define CSR9_MDO        BIT(17)
+#define CSR9_MII        BIT(18)
+#define CSR9_MDI        BIT(19)
+
+#define CSR11_CON       BIT(16)
+#define CSR11_TIMER_MASK 0xffff
+
+#define CSR12_MRA       BIT(0)
+#define CSR12_LS100     BIT(1)
+#define CSR12_LS10      BIT(2)
+#define CSR12_APS       BIT(3)
+#define CSR12_ARA       BIT(8)
+#define CSR12_TRA       BIT(9)
+#define CSR12_NSN       BIT(10)
+#define CSR12_TRF       BIT(11)
+#define CSR12_ANS_SHIFT 12
+#define CSR12_ANS_MASK  7
+#define CSR12_LPN       BIT(15)
+#define CSR12_LPC_SHIFT 16
+#define CSR12_LPC_MASK  0xffff
+
+#define CSR13_SRL       BIT(0)
+#define CSR13_CAC       BIT(2)
+#define CSR13_AUI       BIT(3)
+#define CSR13_SDM_SHIFT 4
+#define CSR13_SDM_MASK  0xfff
+
+#define CSR14_ECEN      BIT(0)
+#define CSR14_LBK       BIT(1)
+#define CSR14_DREN      BIT(2)
+#define CSR14_LSE       BIT(3)
+#define CSR14_CPEN_SHIFT 4
+#define CSR14_CPEN_MASK 3
+#define CSR14_MBO       BIT(6)
+#define CSR14_ANE       BIT(7)
+#define CSR14_RSQ       BIT(8)
+#define CSR14_CSQ       BIT(9)
+#define CSR14_CLD       BIT(10)
+#define CSR14_SQE       BIT(11)
+#define CSR14_LTE       BIT(12)
+#define CSR14_APE       BIT(13)
+#define CSR14_SPP       BIT(14)
+#define CSR14_TAS       BIT(15)
+
+#define CSR15_JBD       BIT(0)
+#define CSR15_HUJ       BIT(1)
+#define CSR15_JCK       BIT(2)
+#define CSR15_ABM       BIT(3)
+#define CSR15_RWD       BIT(4)
+#define CSR15_RWR       BIT(5)
+#define CSR15_LE1       BIT(6)
+#define CSR15_LV1       BIT(7)
+#define CSR15_TSCK      BIT(8)
+#define CSR15_FUSQ      BIT(9)
+#define CSR15_FLF       BIT(10)
+#define CSR15_LSD       BIT(11)
+#define CSR15_DPST      BIT(12)
+#define CSR15_FRL       BIT(13)
+#define CSR15_LE2       BIT(14)
+#define CSR15_LV2       BIT(15)
+
+#define RDES0_OF         BIT(0)
+#define RDES0_CE         BIT(1)
+#define RDES0_DB         BIT(2)
+#define RDES0_RJ         BIT(4)
+#define RDES0_FT         BIT(5)
+#define RDES0_CS         BIT(6)
+#define RDES0_TL         BIT(7)
+#define RDES0_LS         BIT(8)
+#define RDES0_FS         BIT(9)
+#define RDES0_MF         BIT(10)
+#define RDES0_RF         BIT(11)
+#define RDES0_DT_SHIFT   12
+#define RDES0_DT_MASK    3
+#define RDES0_LE         BIT(14)
+#define RDES0_ES         BIT(15)
+#define RDES0_FL_SHIFT   16
+#define RDES0_FL_MASK    0x3fff
+#define RDES0_FF         BIT(30)
+#define RDES0_OWN        BIT(31)
+
+#define RDES1_BUF1_SIZE_SHIFT 0
+#define RDES1_BUF1_SIZE_MASK 0x7ff
+
+#define RDES1_BUF2_SIZE_SHIFT 11
+#define RDES1_BUF2_SIZE_MASK 0x7ff
+#define RDES1_RCH       BIT(24)
+#define RDES1_RER       BIT(25)
+
+#define TDES0_DE        BIT(0)
+#define TDES0_UF        BIT(1)
+#define TDES0_LF        BIT(2)
+#define TDES0_CC_SHIFT  3
+#define TDES0_CC_MASK   0xf
+#define TDES0_HF        BIT(7)
+#define TDES0_EC        BIT(8)
+#define TDES0_LC        BIT(9)
+#define TDES0_NC        BIT(10)
+#define TDES0_LO        BIT(11)
+#define TDES0_TO        BIT(14)
+#define TDES0_ES        BIT(15)
+#define TDES0_OWN       BIT(31)
+
+#define TDES1_BUF1_SIZE_SHIFT 0
+#define TDES1_BUF1_SIZE_MASK 0x7ff
+
+#define TDES1_BUF2_SIZE_SHIFT 11
+#define TDES1_BUF2_SIZE_MASK 0x7ff
+
+#define TDES1_FT0       BIT(22)
+#define TDES1_DPD       BIT(23)
+#define TDES1_TCH       BIT(24)
+#define TDES1_TER       BIT(25)
+#define TDES1_AC        BIT(26)
+#define TDES1_SET       BIT(27)
+#define TDES1_FT1       BIT(28)
+#define TDES1_FS        BIT(29)
+#define TDES1_LS        BIT(30)
+#define TDES1_IC        BIT(31)
+
+struct tulip_descriptor {
+        uint32_t status;
+        uint32_t control;
+        uint32_t buf_addr1;
+        uint32_t buf_addr2;
+} __attribute__((packed));
+
+
+#endif
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 0abe27a53a..11f8ab7149 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -164,6 +164,7 @@ 
 #define PCI_DEVICE_ID_LSI_SAS0079        0x0079
 
 #define PCI_VENDOR_ID_DEC                0x1011
+#define PCI_DEVICE_ID_DEC_21143          0x0019
 #define PCI_DEVICE_ID_DEC_21154          0x0026
 
 #define PCI_VENDOR_ID_CIRRUS             0x1013