Message ID | 20191014112558.3881-2-biwen.li@nxp.com |
---|---|
State | Superseded |
Headers | show |
Series | [1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect | expand |
On 2019-10-14 13:25, Biwen Li wrote: > This replaces property i2c-mux-idle-disconnect with idle-state > > Signed-off-by: Biwen Li <biwen.li@nxp.com> > --- > drivers/i2c/muxes/i2c-mux-pca954x.c | 44 ++++++++++++++++++++--------- > 1 file changed, 31 insertions(+), 13 deletions(-) > > diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c > index 923aa3a5a3dc..a330929c4d67 100644 > --- a/drivers/i2c/muxes/i2c-mux-pca954x.c > +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c > @@ -86,7 +86,7 @@ struct pca954x { > > u8 last_chan; /* last register value */ > /* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */ > - s8 idle_state; > + s32 idle_state; > > struct i2c_client *client; > > @@ -256,7 +256,7 @@ static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan) > { > struct pca954x *data = i2c_mux_priv(muxc); > struct i2c_client *client = data->client; > - s8 idle_state; > + s32 idle_state; > > idle_state = READ_ONCE(data->idle_state); > if (idle_state >= 0) > @@ -411,7 +411,6 @@ static int pca954x_probe(struct i2c_client *client, > struct i2c_adapter *adap = client->adapter; > struct device *dev = &client->dev; > struct device_node *np = dev->of_node; > - bool idle_disconnect_dt; > struct gpio_desc *gpio; > struct i2c_mux_core *muxc; > struct pca954x *data; > @@ -462,22 +461,31 @@ static int pca954x_probe(struct i2c_client *client, > } > } > > + if (of_property_read_u32(np, "idle-state", &data->idle_state)) > + data->idle_state = MUX_IDLE_AS_IS; > + > /* Write the mux register at addr to verify > * that the mux is in fact present. This also > * initializes the mux to disconnected state. > */ > - if (i2c_smbus_write_byte(client, 0) < 0) { > + if (data->idle_state >= 0){ Space before { > + data->last_chan = data->idle_state; data->last_chan should have the actual register value, i.e. (untested) if (data->chip->muxtype == pca954x_ismux) data->last_chan = data->idle_state | data->chip->enable; else data->last_chan = 1 << data->idle_state; ret = i2c_smbus_write_byte(client, data->last_chan); But since this regval calculation is now needed in three places, it should be moved to a helper function. > + /* Always enable multiplexer */ > + ret = i2c_smbus_write_byte(client, data->last_chan | > + (data->chip->muxtype == pca954x_ismux ? > + data->chip->enable : 0)); > + } > + else{ Space before { Naturally, you have the exact same issues in the pca954x_resume hunk, below. > + data->last_chan = 0; /* force the first selection */ > + /* Disconnect multiplexer */ > + ret = i2c_smbus_write_byte(client, data->last_chan); > + } > + > + if (ret < 0) { > dev_warn(dev, "probe failed\n"); > return -ENODEV; > } > > - data->last_chan = 0; /* force the first selection */ > - data->idle_state = MUX_IDLE_AS_IS; > - > - idle_disconnect_dt = np && > - of_property_read_bool(np, "i2c-mux-idle-disconnect"); > - if (idle_disconnect_dt) > - data->idle_state = MUX_IDLE_DISCONNECT; In case the idle-state property is missing, you need to fall back to the old behavior and handle i2c-mux-idle-disconnect as before. Cheers, Peter > > ret = pca954x_irq_setup(muxc); > if (ret) > @@ -531,8 +539,18 @@ static int pca954x_resume(struct device *dev) > struct i2c_mux_core *muxc = i2c_get_clientdata(client); > struct pca954x *data = i2c_mux_priv(muxc); > > - data->last_chan = 0; > - return i2c_smbus_write_byte(client, 0); > + if (data->idle_state >= 0){ > + data->last_chan = data->idle_state; > + /* Always enable multiplexer */ > + return i2c_smbus_write_byte(client, data->last_chan | > + (data->chip->muxtype == pca954x_ismux ? > + data->chip->enable : 0)); > + } > + else{ > + data->last_chan = 0; > + /* Disconnect multiplexer */ > + return i2c_smbus_write_byte(client, data->last_chan); > + } > } > #endif > >
> > Caution: EXT Email > > On 2019-10-14 13:25, Biwen Li wrote: > > This replaces property i2c-mux-idle-disconnect with idle-state > > > > Signed-off-by: Biwen Li <biwen.li@nxp.com> > > --- > > drivers/i2c/muxes/i2c-mux-pca954x.c | 44 > > ++++++++++++++++++++--------- > > 1 file changed, 31 insertions(+), 13 deletions(-) > > > > diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c > > b/drivers/i2c/muxes/i2c-mux-pca954x.c > > index 923aa3a5a3dc..a330929c4d67 100644 > > --- a/drivers/i2c/muxes/i2c-mux-pca954x.c > > +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c > > @@ -86,7 +86,7 @@ struct pca954x { > > > > u8 last_chan; /* last register value */ > > /* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */ > > - s8 idle_state; > > + s32 idle_state; > > > > struct i2c_client *client; > > > > @@ -256,7 +256,7 @@ static int pca954x_deselect_mux(struct > > i2c_mux_core *muxc, u32 chan) { > > struct pca954x *data = i2c_mux_priv(muxc); > > struct i2c_client *client = data->client; > > - s8 idle_state; > > + s32 idle_state; > > > > idle_state = READ_ONCE(data->idle_state); > > if (idle_state >= 0) > > @@ -411,7 +411,6 @@ static int pca954x_probe(struct i2c_client *client, > > struct i2c_adapter *adap = client->adapter; > > struct device *dev = &client->dev; > > struct device_node *np = dev->of_node; > > - bool idle_disconnect_dt; > > struct gpio_desc *gpio; > > struct i2c_mux_core *muxc; > > struct pca954x *data; > > @@ -462,22 +461,31 @@ static int pca954x_probe(struct i2c_client > *client, > > } > > } > > > > + if (of_property_read_u32(np, "idle-state", &data->idle_state)) > > + data->idle_state = MUX_IDLE_AS_IS; > > + > > /* Write the mux register at addr to verify > > * that the mux is in fact present. This also > > * initializes the mux to disconnected state. > > */ > > - if (i2c_smbus_write_byte(client, 0) < 0) { > > + if (data->idle_state >= 0){ > > Space before { Okay, got it, I will add it in v2. > > > + data->last_chan = data->idle_state; > > data->last_chan should have the actual register value, i.e. (untested) Okay, got it, I will adjust it in v2. > > if (data->chip->muxtype == pca954x_ismux) > data->last_chan = data->idle_state | > data->chip->enable; > else > data->last_chan = 1 << data->idle_state; > > ret = i2c_smbus_write_byte(client, data->last_chan); > > But since this regval calculation is now needed in three places, it should be > moved to a helper function. You are right, I will add a helper function in v2. > > > + /* Always enable multiplexer */ > > + ret = i2c_smbus_write_byte(client, data->last_chan | > > + (data->chip->muxtype == > pca954x_ismux ? > > + data->chip->enable : 0)); > > + } > > + else{ > > Space before { Got it, I will add it in v2. > > Naturally, you have the exact same issues in the pca954x_resume hunk, > below. Got it > > > + data->last_chan = 0; /* force the first > selection */ > > + /* Disconnect multiplexer */ > > + ret = i2c_smbus_write_byte(client, data->last_chan); > > + } > > + > > + if (ret < 0) { > > dev_warn(dev, "probe failed\n"); > > return -ENODEV; > > } > > > > - data->last_chan = 0; /* force the first selection */ > > - data->idle_state = MUX_IDLE_AS_IS; > > - > > - idle_disconnect_dt = np && > > - of_property_read_bool(np, "i2c-mux-idle-disconnect"); > > - if (idle_disconnect_dt) > > - data->idle_state = MUX_IDLE_DISCONNECT; > > In case the idle-state property is missing, you need to fall back to the old > behavior and handle i2c-mux-idle-disconnect as before. Okay, got it, I will add it in v2. > > Cheers, > Peter > > > > > ret = pca954x_irq_setup(muxc); > > if (ret) > > @@ -531,8 +539,18 @@ static int pca954x_resume(struct device *dev) > > struct i2c_mux_core *muxc = i2c_get_clientdata(client); > > struct pca954x *data = i2c_mux_priv(muxc); > > > > - data->last_chan = 0; > > - return i2c_smbus_write_byte(client, 0); > > + if (data->idle_state >= 0){ > > + data->last_chan = data->idle_state; > > + /* Always enable multiplexer */ > > + return i2c_smbus_write_byte(client, data->last_chan | > > + (data->chip->muxtype == > pca954x_ismux ? > > + data->chip->enable : 0)); > > + } > > + else{ > > + data->last_chan = 0; > > + /* Disconnect multiplexer */ > > + return i2c_smbus_write_byte(client, data->last_chan); > > + } > > } > > #endif > > > >
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 923aa3a5a3dc..a330929c4d67 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -86,7 +86,7 @@ struct pca954x { u8 last_chan; /* last register value */ /* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */ - s8 idle_state; + s32 idle_state; struct i2c_client *client; @@ -256,7 +256,7 @@ static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan) { struct pca954x *data = i2c_mux_priv(muxc); struct i2c_client *client = data->client; - s8 idle_state; + s32 idle_state; idle_state = READ_ONCE(data->idle_state); if (idle_state >= 0) @@ -411,7 +411,6 @@ static int pca954x_probe(struct i2c_client *client, struct i2c_adapter *adap = client->adapter; struct device *dev = &client->dev; struct device_node *np = dev->of_node; - bool idle_disconnect_dt; struct gpio_desc *gpio; struct i2c_mux_core *muxc; struct pca954x *data; @@ -462,22 +461,31 @@ static int pca954x_probe(struct i2c_client *client, } } + if (of_property_read_u32(np, "idle-state", &data->idle_state)) + data->idle_state = MUX_IDLE_AS_IS; + /* Write the mux register at addr to verify * that the mux is in fact present. This also * initializes the mux to disconnected state. */ - if (i2c_smbus_write_byte(client, 0) < 0) { + if (data->idle_state >= 0){ + data->last_chan = data->idle_state; + /* Always enable multiplexer */ + ret = i2c_smbus_write_byte(client, data->last_chan | + (data->chip->muxtype == pca954x_ismux ? + data->chip->enable : 0)); + } + else{ + data->last_chan = 0; /* force the first selection */ + /* Disconnect multiplexer */ + ret = i2c_smbus_write_byte(client, data->last_chan); + } + + if (ret < 0) { dev_warn(dev, "probe failed\n"); return -ENODEV; } - data->last_chan = 0; /* force the first selection */ - data->idle_state = MUX_IDLE_AS_IS; - - idle_disconnect_dt = np && - of_property_read_bool(np, "i2c-mux-idle-disconnect"); - if (idle_disconnect_dt) - data->idle_state = MUX_IDLE_DISCONNECT; ret = pca954x_irq_setup(muxc); if (ret) @@ -531,8 +539,18 @@ static int pca954x_resume(struct device *dev) struct i2c_mux_core *muxc = i2c_get_clientdata(client); struct pca954x *data = i2c_mux_priv(muxc); - data->last_chan = 0; - return i2c_smbus_write_byte(client, 0); + if (data->idle_state >= 0){ + data->last_chan = data->idle_state; + /* Always enable multiplexer */ + return i2c_smbus_write_byte(client, data->last_chan | + (data->chip->muxtype == pca954x_ismux ? + data->chip->enable : 0)); + } + else{ + data->last_chan = 0; + /* Disconnect multiplexer */ + return i2c_smbus_write_byte(client, data->last_chan); + } } #endif
This replaces property i2c-mux-idle-disconnect with idle-state Signed-off-by: Biwen Li <biwen.li@nxp.com> --- drivers/i2c/muxes/i2c-mux-pca954x.c | 44 ++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 13 deletions(-)