Message ID | 20190918105250.22855-2-oleg@kaa.org.ua |
---|---|
State | Superseded, archived |
Headers | show |
Series | [v9,1/2] dt-bindings: Add docs for EL15203000 | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success |
Hi Oleh, Thank you for the update. I have some comments below. Please take a look. On 9/18/19 12:52 PM, Oleh Kravchenko wrote: > Add documentation and example for dt-bindings EL15203000. > LED board (aka RED LED board) from Crane Merchandising Systems. > > Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> > --- > .../bindings/leds/leds-el15203000.txt | 147 ++++++++++++++++++ > 1 file changed, 147 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-el15203000.txt > > diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt > new file mode 100644 > index 000000000000..4a9b29cc9f46 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt > @@ -0,0 +1,147 @@ > +Crane Merchandising System - EL15203000 LED driver > +-------------------------------------------------- > + > +This LED Board (aka RED LEDs board) is widely used in > +coffee vending machines produced by Crane Merchandising Systems. > +The board manages 3 LEDs and supports predefined blinking patterns > +for specific leds. > + > +Vending area LED encoded with symbol 'V' (hex code 0x56). > +Doesn't have any hardware blinking pattern. > + > +Screen light tube LED which surrounds vending machine screen and > +encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern: > + > + ^ > + | > +Max >_____***___________** > + | * * * > + | * * * > + | * * * > + | * * * > +Min >*___________***______ > + | > + +------^------^------> time (sec) > + 0 4 8 > + > + > +Water Pipe LED actually consists from 5 LEDs "(hex code 0x50)" is here missing if you want to be consistent. > +that exposed by protocol like one LED. Supports next patterns: > + > +- cascade pattern > + > + ^ > + | > +LED0 >*****____________________*****____________________***** > + | > +LED1 >_____*****____________________*****____________________ > + | > +LED2 >__________*****____________________*****_______________ > + | > +LED3 >_______________*****____________________*****__________ > + | > +LED4 >____________________*****____________________*****_____ > + | > + +----^----^----^----^----^----^----^----^----^----^----> time (sec) > + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 > + > +- inversed cascade pattern > + > + ^ > + | > +LED0 >_____********************_____********************_____ > + | > +LED1 >*****_____********************_____******************** > + | > +LED2 >**********_____********************_____*************** > + | > +LED3 >***************_____********************_____********** > + | > +LED4 >********************_____********************_____***** > + | > + +----^----^----^----^----^----^----^----^----^----^----> time (sec) > + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 > + > +- bounce pattern > + > + ^ > + | > +LED0 >*****________________________________________*****_____ > + | > +LED1 >_____*****______________________________*****_____***** > + | > +LED2 >__________*****____________________*****_______________ > + | > +LED3 >_______________*****__________*****____________________ > + | > +LED4 >____________________**********_________________________ > + | > + +----^----^----^----^----^----^----^----^----^----^----> time (sec) > + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 > + > +- inversed bounce pattern > + > + ^ > + | > +LED0 >_____****************************************_____***** > + | > +LED1 >*****_____******************************_____*****_____ > + | > +LED2 >**********_____********************_____*************** > + | > +LED3 >***************_____**********_____******************** > + | > +LED4 >********************__________************************* > + | > + +----^----^----^----^----^----^----^----^----^----^----> time (sec) > + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 Regarding this ASCII art - I presume you wanted to follow Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt. It was added to bindings because we support 'pattern' value for linux,default-trigger, which in turn looks for 'led-pattern' property, whose format needs to be documented in the LED bindings. leds-trigger-pattern.txt documents only common syntax for software pattern engine. Currently we don't have a means to setup hw_pattern for the pattern trigger from DT, which is obvious omission and your patch just brings it to light. That said, I propose to fix it alongside and introduce led-hw-pattern property. When present, ledtrig-pattern would setup the pattern using pattern_set op, similarly as if it was set via sysfs hw_pattern file. Only in this case placing the pattern depiction here would be justified. Otherwise, it would have to land in the ABI documentation. > + > +Required properties: > +- compatible : "crane,el15203000" > +- #address-cells : must be 1 > +- #size-cells : must be 0 > + > +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt > +apply. In particular, "reg" and "spi-max-frequency" properties must be given. > + > +Optional LED sub-node properties: > +- function: > + see Documentation/devicetree/bindings/leds/common.txt > +- color: > + see Documentation/devicetree/bindings/leds/common.txt > +- label: > + see Documentation/devicetree/bindings/leds/common.txt (deprecated) > + > +Example > +------- > + > +#include <dt-bindings/leds/common.h> > + > +led-controller@0 { > + compatible = "crane,el15203000"; > + reg = <0>; > + spi-max-frequency = <50000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* water pipe */ > + led@50 { > + reg = <0x50>; > + function = "pipe"; > + color = <LED_COLOR_ID_RED>; > + }; > + > + /* screen frame */ > + led@53 { > + reg = <0x53>; > + function = "screen"; > + color = <LED_COLOR_ID_RED>; > + }; > + > + /* vending area */ > + led@56 { > + reg = <0x56>; > + function = "vend"; > + color = <LED_COLOR_ID_RED>; > + }; > +}; >
Hello Jacek, 19.09.19 00:02, Jacek Anaszewski пише: > Hi Oleh, > > Thank you for the update. > > I have some comments below. Please take a look. > > On 9/18/19 12:52 PM, Oleh Kravchenko wrote: >> Add documentation and example for dt-bindings EL15203000. >> LED board (aka RED LED board) from Crane Merchandising Systems. >> >> Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> >> --- >> .../bindings/leds/leds-el15203000.txt | 147 ++++++++++++++++++ >> 1 file changed, 147 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-el15203000.txt >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt >> new file mode 100644 >> index 000000000000..4a9b29cc9f46 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt >> @@ -0,0 +1,147 @@ >> +Crane Merchandising System - EL15203000 LED driver >> +-------------------------------------------------- >> + >> +This LED Board (aka RED LEDs board) is widely used in >> +coffee vending machines produced by Crane Merchandising Systems. >> +The board manages 3 LEDs and supports predefined blinking patterns >> +for specific leds. >> + >> +Vending area LED encoded with symbol 'V' (hex code 0x56). >> +Doesn't have any hardware blinking pattern. >> + >> +Screen light tube LED which surrounds vending machine screen and >> +encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern: >> + >> + ^ >> + | >> +Max >_____***___________** >> + | * * * >> + | * * * >> + | * * * >> + | * * * >> +Min >*___________***______ >> + | >> + +------^------^------> time (sec) >> + 0 4 8 >> + >> + >> +Water Pipe LED actually consists from 5 LEDs > > "(hex code 0x50)" is here missing if you want to be consistent. > >> +that exposed by protocol like one LED. Supports next patterns: >> + >> +- cascade pattern >> + >> + ^ >> + | >> +LED0 >*****____________________*****____________________***** >> + | >> +LED1 >_____*****____________________*****____________________ >> + | >> +LED2 >__________*****____________________*****_______________ >> + | >> +LED3 >_______________*****____________________*****__________ >> + | >> +LED4 >____________________*****____________________*****_____ >> + | >> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >> + >> +- inversed cascade pattern >> + >> + ^ >> + | >> +LED0 >_____********************_____********************_____ >> + | >> +LED1 >*****_____********************_____******************** >> + | >> +LED2 >**********_____********************_____*************** >> + | >> +LED3 >***************_____********************_____********** >> + | >> +LED4 >********************_____********************_____***** >> + | >> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >> + >> +- bounce pattern >> + >> + ^ >> + | >> +LED0 >*****________________________________________*****_____ >> + | >> +LED1 >_____*****______________________________*****_____***** >> + | >> +LED2 >__________*****____________________*****_______________ >> + | >> +LED3 >_______________*****__________*****____________________ >> + | >> +LED4 >____________________**********_________________________ >> + | >> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >> + >> +- inversed bounce pattern >> + >> + ^ >> + | >> +LED0 >_____****************************************_____***** >> + | >> +LED1 >*****_____******************************_____*****_____ >> + | >> +LED2 >**********_____********************_____*************** >> + | >> +LED3 >***************_____**********_____******************** >> + | >> +LED4 >********************__________************************* >> + | >> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 > > Regarding this ASCII art - I presume you wanted to follow > Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt. > > It was added to bindings because we support 'pattern' value > for linux,default-trigger, which in turn looks for 'led-pattern' > property, whose format needs to be documented in the LED bindings. > > leds-trigger-pattern.txt documents only common syntax for software > pattern engine. Currently we don't have a means to setup hw_pattern > for the pattern trigger from DT, which is obvious omission and your > patch just brings it to light. > > That said, I propose to fix it alongside and introduce led-hw-pattern > property. When present, ledtrig-pattern would setup the pattern > using pattern_set op, similarly as if it was set via sysfs hw_pattern > file. > > Only in this case placing the pattern depiction here would be justified. > Otherwise, it would have to land in the ABI documentation. You are okay, if I move it to Documentation/ABI/testing/sysfs-class-led-driver-el15203000 ?
On 9/18/19 11:17 PM, Oleh Kravchenko wrote: > Hello Jacek, > > 19.09.19 00:02, Jacek Anaszewski пише: >> Hi Oleh, >> >> Thank you for the update. >> >> I have some comments below. Please take a look. >> >> On 9/18/19 12:52 PM, Oleh Kravchenko wrote: >>> Add documentation and example for dt-bindings EL15203000. >>> LED board (aka RED LED board) from Crane Merchandising Systems. >>> >>> Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> >>> --- >>> .../bindings/leds/leds-el15203000.txt | 147 ++++++++++++++++++ >>> 1 file changed, 147 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/leds/leds-el15203000.txt >>> >>> diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt >>> new file mode 100644 >>> index 000000000000..4a9b29cc9f46 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt >>> @@ -0,0 +1,147 @@ >>> +Crane Merchandising System - EL15203000 LED driver >>> +-------------------------------------------------- >>> + >>> +This LED Board (aka RED LEDs board) is widely used in >>> +coffee vending machines produced by Crane Merchandising Systems. >>> +The board manages 3 LEDs and supports predefined blinking patterns >>> +for specific leds. >>> + >>> +Vending area LED encoded with symbol 'V' (hex code 0x56). >>> +Doesn't have any hardware blinking pattern. >>> + >>> +Screen light tube LED which surrounds vending machine screen and >>> +encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern: >>> + >>> + ^ >>> + | >>> +Max >_____***___________** >>> + | * * * >>> + | * * * >>> + | * * * >>> + | * * * >>> +Min >*___________***______ >>> + | >>> + +------^------^------> time (sec) >>> + 0 4 8 >>> + >>> + >>> +Water Pipe LED actually consists from 5 LEDs >> >> "(hex code 0x50)" is here missing if you want to be consistent. >> >>> +that exposed by protocol like one LED. Supports next patterns: >>> + >>> +- cascade pattern >>> + >>> + ^ >>> + | >>> +LED0 >*****____________________*****____________________***** >>> + | >>> +LED1 >_____*****____________________*****____________________ >>> + | >>> +LED2 >__________*****____________________*****_______________ >>> + | >>> +LED3 >_______________*****____________________*****__________ >>> + | >>> +LED4 >____________________*****____________________*****_____ >>> + | >>> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >>> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >>> + >>> +- inversed cascade pattern >>> + >>> + ^ >>> + | >>> +LED0 >_____********************_____********************_____ >>> + | >>> +LED1 >*****_____********************_____******************** >>> + | >>> +LED2 >**********_____********************_____*************** >>> + | >>> +LED3 >***************_____********************_____********** >>> + | >>> +LED4 >********************_____********************_____***** >>> + | >>> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >>> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >>> + >>> +- bounce pattern >>> + >>> + ^ >>> + | >>> +LED0 >*****________________________________________*****_____ >>> + | >>> +LED1 >_____*****______________________________*****_____***** >>> + | >>> +LED2 >__________*****____________________*****_______________ >>> + | >>> +LED3 >_______________*****__________*****____________________ >>> + | >>> +LED4 >____________________**********_________________________ >>> + | >>> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >>> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >>> + >>> +- inversed bounce pattern >>> + >>> + ^ >>> + | >>> +LED0 >_____****************************************_____***** >>> + | >>> +LED1 >*****_____******************************_____*****_____ >>> + | >>> +LED2 >**********_____********************_____*************** >>> + | >>> +LED3 >***************_____**********_____******************** >>> + | >>> +LED4 >********************__________************************* >>> + | >>> + +----^----^----^----^----^----^----^----^----^----^----> time (sec) >>> + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 >> >> Regarding this ASCII art - I presume you wanted to follow >> Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt. >> >> It was added to bindings because we support 'pattern' value >> for linux,default-trigger, which in turn looks for 'led-pattern' >> property, whose format needs to be documented in the LED bindings. >> >> leds-trigger-pattern.txt documents only common syntax for software >> pattern engine. Currently we don't have a means to setup hw_pattern >> for the pattern trigger from DT, which is obvious omission and your >> patch just brings it to light. >> >> That said, I propose to fix it alongside and introduce led-hw-pattern >> property. When present, ledtrig-pattern would setup the pattern >> using pattern_set op, similarly as if it was set via sysfs hw_pattern >> file. >> >> Only in this case placing the pattern depiction here would be justified. >> Otherwise, it would have to land in the ABI documentation. > > You are okay, if I move it to Documentation/ABI/testing/sysfs-class-led-driver-el15203000 ? > Yes, we can cover led-hw-pattern property later.
Hi! > > Regarding this ASCII art - I presume you wanted to follow > > Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt. > > > > It was added to bindings because we support 'pattern' value > > for linux,default-trigger, which in turn looks for 'led-pattern' > > property, whose format needs to be documented in the LED bindings. > > > > leds-trigger-pattern.txt documents only common syntax for software > > pattern engine. Currently we don't have a means to setup hw_pattern > > for the pattern trigger from DT, which is obvious omission and your > > patch just brings it to light. > > > > That said, I propose to fix it alongside and introduce led-hw-pattern > > property. When present, ledtrig-pattern would setup the pattern > > using pattern_set op, similarly as if it was set via sysfs hw_pattern > > file. > > > > Only in this case placing the pattern depiction here would be justified. > > Otherwise, it would have to land in the ABI documentation. > > You are okay, if I move it to Documentation/ABI/testing/sysfs-class-led-driver-el15203000 ? I don't see if this got a reply. Yes, Documentation/ABI/testing/sysfs-class-led-driver-el15203000 sounds like a right place for the sysfs description. Best regards, Pavel
Hi Pavel. On 10/13/19 2:11 PM, Pavel Machek wrote: > Hi! > >>> Regarding this ASCII art - I presume you wanted to follow >>> Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt. >>> >>> It was added to bindings because we support 'pattern' value >>> for linux,default-trigger, which in turn looks for 'led-pattern' >>> property, whose format needs to be documented in the LED bindings. >>> >>> leds-trigger-pattern.txt documents only common syntax for software >>> pattern engine. Currently we don't have a means to setup hw_pattern >>> for the pattern trigger from DT, which is obvious omission and your >>> patch just brings it to light. >>> >>> That said, I propose to fix it alongside and introduce led-hw-pattern >>> property. When present, ledtrig-pattern would setup the pattern >>> using pattern_set op, similarly as if it was set via sysfs hw_pattern >>> file. >>> >>> Only in this case placing the pattern depiction here would be justified. >>> Otherwise, it would have to land in the ABI documentation. >> >> You are okay, if I move it to Documentation/ABI/testing/sysfs-class-led-driver-el15203000 ? > > I don't see if this got a reply. Yes, > Documentation/ABI/testing/sysfs-class-led-driver-el15203000 sounds > like a right place for the sysfs description. There was no explicit reply because Oleh sent the update with this change before I managed to respond. And the patch is already in the for-next branch with the file in the discussed location. So the reply was in the form of my later confirmation that the patch was applied.
Hello Pavel, 13.10.19 19:47, Jacek Anaszewski пише: > Hi Pavel. > > On 10/13/19 2:11 PM, Pavel Machek wrote: >> Hi! >> >>>> Regarding this ASCII art - I presume you wanted to follow >>>> Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt. >>>> >>>> It was added to bindings because we support 'pattern' value >>>> for linux,default-trigger, which in turn looks for 'led-pattern' >>>> property, whose format needs to be documented in the LED bindings. >>>> >>>> leds-trigger-pattern.txt documents only common syntax for software >>>> pattern engine. Currently we don't have a means to setup hw_pattern >>>> for the pattern trigger from DT, which is obvious omission and your >>>> patch just brings it to light. >>>> >>>> That said, I propose to fix it alongside and introduce led-hw-pattern >>>> property. When present, ledtrig-pattern would setup the pattern >>>> using pattern_set op, similarly as if it was set via sysfs hw_pattern >>>> file. >>>> >>>> Only in this case placing the pattern depiction here would be justified. >>>> Otherwise, it would have to land in the ABI documentation. >>> >>> You are okay, if I move it to Documentation/ABI/testing/sysfs-class-led-driver-el15203000 ? >> >> I don't see if this got a reply. Yes, >> Documentation/ABI/testing/sysfs-class-led-driver-el15203000 sounds >> like a right place for the sysfs description. > > There was no explicit reply because Oleh sent the update with this > change before I managed to respond. And the patch is already in the > for-next branch with the file in the discussed location. So the reply > was in the form of my later confirmation that the patch was applied. > Anyway thanks for reply.
diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt new file mode 100644 index 000000000000..4a9b29cc9f46 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt @@ -0,0 +1,147 @@ +Crane Merchandising System - EL15203000 LED driver +-------------------------------------------------- + +This LED Board (aka RED LEDs board) is widely used in +coffee vending machines produced by Crane Merchandising Systems. +The board manages 3 LEDs and supports predefined blinking patterns +for specific leds. + +Vending area LED encoded with symbol 'V' (hex code 0x56). +Doesn't have any hardware blinking pattern. + +Screen light tube LED which surrounds vending machine screen and +encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern: + + ^ + | +Max >_____***___________** + | * * * + | * * * + | * * * + | * * * +Min >*___________***______ + | + +------^------^------> time (sec) + 0 4 8 + + +Water Pipe LED actually consists from 5 LEDs +that exposed by protocol like one LED. Supports next patterns: + +- cascade pattern + + ^ + | +LED0 >*****____________________*****____________________***** + | +LED1 >_____*****____________________*****____________________ + | +LED2 >__________*****____________________*****_______________ + | +LED3 >_______________*****____________________*****__________ + | +LED4 >____________________*****____________________*****_____ + | + +----^----^----^----^----^----^----^----^----^----^----> time (sec) + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 + +- inversed cascade pattern + + ^ + | +LED0 >_____********************_____********************_____ + | +LED1 >*****_____********************_____******************** + | +LED2 >**********_____********************_____*************** + | +LED3 >***************_____********************_____********** + | +LED4 >********************_____********************_____***** + | + +----^----^----^----^----^----^----^----^----^----^----> time (sec) + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 + +- bounce pattern + + ^ + | +LED0 >*****________________________________________*****_____ + | +LED1 >_____*****______________________________*****_____***** + | +LED2 >__________*****____________________*****_______________ + | +LED3 >_______________*****__________*****____________________ + | +LED4 >____________________**********_________________________ + | + +----^----^----^----^----^----^----^----^----^----^----> time (sec) + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 + +- inversed bounce pattern + + ^ + | +LED0 >_____****************************************_____***** + | +LED1 >*****_____******************************_____*****_____ + | +LED2 >**********_____********************_____*************** + | +LED3 >***************_____**********_____******************** + | +LED4 >********************__________************************* + | + +----^----^----^----^----^----^----^----^----^----^----> time (sec) + 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 + +Required properties: +- compatible : "crane,el15203000" +- #address-cells : must be 1 +- #size-cells : must be 0 + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +Optional LED sub-node properties: +- function: + see Documentation/devicetree/bindings/leds/common.txt +- color: + see Documentation/devicetree/bindings/leds/common.txt +- label: + see Documentation/devicetree/bindings/leds/common.txt (deprecated) + +Example +------- + +#include <dt-bindings/leds/common.h> + +led-controller@0 { + compatible = "crane,el15203000"; + reg = <0>; + spi-max-frequency = <50000>; + #address-cells = <1>; + #size-cells = <0>; + + /* water pipe */ + led@50 { + reg = <0x50>; + function = "pipe"; + color = <LED_COLOR_ID_RED>; + }; + + /* screen frame */ + led@53 { + reg = <0x53>; + function = "screen"; + color = <LED_COLOR_ID_RED>; + }; + + /* vending area */ + led@56 { + reg = <0x56>; + function = "vend"; + color = <LED_COLOR_ID_RED>; + }; +};
Add documentation and example for dt-bindings EL15203000. LED board (aka RED LED board) from Crane Merchandising Systems. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> --- .../bindings/leds/leds-el15203000.txt | 147 ++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-el15203000.txt