@@ -18,7 +18,7 @@ across the sample scripts. Usage example is printed on errors::
Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
-i : ($DEV) output interface/device (required)
-s : ($PKT_SIZE) packet size
- -d : ($DEST_IP) destination IP
+ -d : ($DEST_IP) destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed
-m : ($DST_MAC) destination MAC-addr
-p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed
-t : ($THREADS) threads to start
@@ -8,7 +8,7 @@ function usage() {
echo "Usage: $0 [-vx] -i ethX"
echo " -i : (\$DEV) output interface/device (required)"
echo " -s : (\$PKT_SIZE) packet size"
- echo " -d : (\$DEST_IP) destination IP"
+ echo " -d : (\$DEST_IP) destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed"
echo " -m : (\$DST_MAC) destination MAC-addr"
echo " -p : (\$DST_PORT) destination PORT range (e.g. 433-444) is also allowed"
echo " -t : (\$THREADS) threads to start"
@@ -41,6 +41,7 @@ fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$BURST" ] && BURST=1024
[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -71,7 +72,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst$IP6 $DEST_IP"
+ pg_set $dev "dst${IP6}_min $DST_MIN"
+ pg_set $dev "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -24,6 +24,7 @@ if [[ -n "$BURST" ]]; then
err 1 "Bursting not supported for this mode"
fi
[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -54,7 +55,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst$IP6 $DEST_IP"
+ pg_set $dev "dst${IP6}_min $DST_MIN"
+ pg_set $dev "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -22,6 +22,7 @@ fi
# Example enforce param "-m" for dst_mac
[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -61,7 +62,8 @@ pg_set $DEV "flag NO_TIMESTAMP"
# Destination
pg_set $DEV "dst_mac $DST_MAC"
-pg_set $DEV "dst$IP6 $DEST_IP"
+pg_set $DEV "dst${IP6}_min $DST_MIN"
+pg_set $DEV "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -29,6 +29,7 @@ if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -62,7 +63,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst$IP6 $DEST_IP"
+ pg_set $dev "dst${IP6}_min $DST_MIN"
+ pg_set $dev "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -33,6 +33,7 @@ fi
[ -z "$BURST" ] && BURST=32
[ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -62,7 +63,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst$IP6 $DEST_IP"
+ pg_set $dev "dst${IP6}_min $DST_MIN"
+ pg_set $dev "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -17,6 +17,7 @@ source ${basedir}/parameters.sh
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -37,6 +38,9 @@ if [[ -n "$BURST" ]]; then
err 1 "Bursting not supported for this mode"
fi
+# 198.18.0.0 / 198.19.255.255
+read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15)
+
# General cleanup everything since last run
pg_ctrl "reset"
@@ -58,7 +62,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Single destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst $DEST_IP"
+ pg_set $dev "dst_min $DST_MIN"
+ pg_set $dev "dst_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -69,8 +74,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Randomize source IP-addresses
pg_set $dev "flag IPSRC_RND"
- pg_set $dev "src_min 198.18.0.0"
- pg_set $dev "src_max 198.19.255.255"
+ pg_set $dev "src_min $SRC_MIN"
+ pg_set $dev "src_max $SRC_MAX"
# Limit number of flows (max 65535)
pg_set $dev "flows $FLOWS"
@@ -22,6 +22,7 @@ source ${basedir}/parameters.sh
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
[ -z "$BURST" ] && BURST=32
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -51,7 +52,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# Single destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst $DEST_IP"
+ pg_set $dev "dst_min $DST_MIN"
+ pg_set $dev "dst_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
@@ -35,6 +35,7 @@ if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+[ -n "$DEST_IP" ] && read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
@@ -79,7 +80,8 @@ for ((i = 0; i < $THREADS; i++)); do
# Destination
pg_set $dev "dst_mac $DST_MAC"
- pg_set $dev "dst$IP6 $DEST_IP"
+ pg_set $dev "dst${IP6}_min $DST_MIN"
+ pg_set $dev "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
Currently, kernel pktgen has the feature to specify destination address range for sending packet. (e.g. pgset "dst_min/dst_max") But on samples, each of the scripts doesn't have any option to achieve this. This commit adds the feature to specify the destination address range with CIDR. -d : ($DEST_IP) destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed # ./pktgen_sample01_simple.sh -6 -d fe80::20/126 -p 3000 -n 4 # tcpdump ip6 and udp 05:14:18.082285 IP6 fe80::99.71 > fe80::23.3000: UDP, length 16 05:14:18.082564 IP6 fe80::99.43 > fe80::23.3000: UDP, length 16 05:14:18.083366 IP6 fe80::99.107 > fe80::22.3000: UDP, length 16 05:14:18.083585 IP6 fe80::99.97 > fe80::21.3000: UDP, length 16 Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> --- samples/pktgen/README.rst | 2 +- samples/pktgen/parameters.sh | 2 +- .../pktgen/pktgen_bench_xmit_mode_netif_receive.sh | 4 +++- samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh | 4 +++- samples/pktgen/pktgen_sample01_simple.sh | 4 +++- samples/pktgen/pktgen_sample02_multiqueue.sh | 4 +++- samples/pktgen/pktgen_sample03_burst_single_flow.sh | 4 +++- samples/pktgen/pktgen_sample04_many_flows.sh | 11 ++++++++--- samples/pktgen/pktgen_sample05_flow_per_thread.sh | 4 +++- .../pktgen_sample06_numa_awared_queue_irq_affinity.sh | 4 +++- 10 files changed, 31 insertions(+), 12 deletions(-)