| Message ID | 1567585440-13751-7-git-send-email-nkristam@nvidia.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Tegra XUSB gadget driver support | expand |
On Wed, 2019-09-04 at 13:53 +0530, Nagarjuna Kristam wrote: > Enable XUSB device mode driver for USB0 slot on Jetson TX1. > > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> > Reviewed-by: JC Kuo <jckuo@nvidia.com> > --- > arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +++++++++++++++++++++++++- > 1 file changed, 30 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > index a7dc319..6aba1ba 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > @@ -1362,7 +1362,7 @@ > status = "okay"; > > lanes { > - usb2-0 { > + micro_b: usb2-0 { > nvidia,function = "xusb"; > status = "okay"; > }; > @@ -1483,6 +1483,21 @@ > vmmc-supply = <&vdd_3v3_sd>; > }; > > + usb@700d0000 { > + status = "okay"; > + phys = <µ_b>; > + phy-names = "usb2"; > + avddio-usb-supply = <&vdd_3v3_sys>; > + hvdd-usb-supply = <&vdd_1v8>; > + usb-role-switch; > + > + port { > + usb_role_switch: endpoint { > + remote-endpoint = <&usb_b_conn_ep>; > + }; > + }; > + }; > + > regulators { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -1641,4 +1656,18 @@ > linux,code = <KEY_VOLUMEUP>; > }; > }; > + > + usb_type_b: connector { > + compatible = "linux,usb-conn-gpio", "gpio-usb-b-connector"; please use "gpio-usb-b-connector" and "usb-b-connector", due to "linux,usb-conn-gpio" is not supported now > + label = "micro-USB"; > + type = "micro"; > + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>; > + > + port { > + usb_b_conn_ep: endpoint { > + remote-endpoint = <&usb_role_switch>; > + }; > + }; > + }; > + > };
On 04-09-2019 15:17, Chunfeng Yun wrote: > On Wed, 2019-09-04 at 13:53 +0530, Nagarjuna Kristam wrote: >> Enable XUSB device mode driver for USB0 slot on Jetson TX1. >> >> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> >> Reviewed-by: JC Kuo <jckuo@nvidia.com> >> --- >> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +++++++++++++++++++++++++- >> 1 file changed, 30 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> index a7dc319..6aba1ba 100644 >> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> @@ -1362,7 +1362,7 @@ >> status = "okay"; >> >> lanes { >> - usb2-0 { >> + micro_b: usb2-0 { >> nvidia,function = "xusb"; >> status = "okay"; >> }; >> @@ -1483,6 +1483,21 @@ >> vmmc-supply = <&vdd_3v3_sd>; >> }; >> >> + usb@700d0000 { >> + status = "okay"; >> + phys = <µ_b>; >> + phy-names = "usb2"; >> + avddio-usb-supply = <&vdd_3v3_sys>; >> + hvdd-usb-supply = <&vdd_1v8>; >> + usb-role-switch; >> + >> + port { >> + usb_role_switch: endpoint { >> + remote-endpoint = <&usb_b_conn_ep>; >> + }; >> + }; >> + }; >> + >> regulators { >> compatible = "simple-bus"; >> #address-cells = <1>; >> @@ -1641,4 +1656,18 @@ >> linux,code = <KEY_VOLUMEUP>; >> }; >> }; >> + >> + usb_type_b: connector { >> + compatible = "linux,usb-conn-gpio", "gpio-usb-b-connector"; > please use "gpio-usb-b-connector" and "usb-b-connector", due to > "linux,usb-conn-gpio" is not supported now > > Thanks for info, will update accordingly. >> + label = "micro-USB"; >> + type = "micro"; >> + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>; >> + >> + port { >> + usb_b_conn_ep: endpoint { >> + remote-endpoint = <&usb_role_switch>; >> + }; >> + }; >> + }; >> + >> }; > >
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a7dc319..6aba1ba 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1362,7 +1362,7 @@ status = "okay"; lanes { - usb2-0 { + micro_b: usb2-0 { nvidia,function = "xusb"; status = "okay"; }; @@ -1483,6 +1483,21 @@ vmmc-supply = <&vdd_3v3_sd>; }; + usb@700d0000 { + status = "okay"; + phys = <µ_b>; + phy-names = "usb2"; + avddio-usb-supply = <&vdd_3v3_sys>; + hvdd-usb-supply = <&vdd_1v8>; + usb-role-switch; + + port { + usb_role_switch: endpoint { + remote-endpoint = <&usb_b_conn_ep>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -1641,4 +1656,18 @@ linux,code = <KEY_VOLUMEUP>; }; }; + + usb_type_b: connector { + compatible = "linux,usb-conn-gpio", "gpio-usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + port { + usb_b_conn_ep: endpoint { + remote-endpoint = <&usb_role_switch>; + }; + }; + }; + };