| Message ID | 20190825153237.28829-5-shawnguo@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL,1/7] i.MX drivers update for 5.4 | expand |
On Sun, Aug 25, 2019 at 5:33 PM Shawn Guo <shawnguo@kernel.org> wrote: > > ---------------------------------------------------------------- > i.MX arm32 device tree changes for 5.4: > - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and > PHYTEC phyBOARD-Segin based on i.MX6ULL. > - A series from Andrey Smirnov to update vf610-zii boards on I2C > pinmux, switch watchdog, GPIO expander IRQ. > - Move GIC node into soc node for i.MX6 SoCs. > - Add OV5645 camera support for imx6qdl-wandboard board. > - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri. > - Use simple-mfd instead of simple-bus for i.MX6 ANATOP. > - Move the native-mode property inside the display-timings node for > various i.MX25 and i.MX27 boards. > - Add EDMA devices for i.MX7ULP SoC. > - A series from Stefan Riedmueller to update imx6ul-phytec-segin board > on various devices. > - Use OF graph to describe the display for opos6uldev board. > - Misc random updates on i.MX7/6 boards. Pulled into arm/dt, thanks! Arnd
The following changes since commit 5f9e832c137075045d15cd6899ab0505cfb2ca4b: Linus 5.3-rc1 (2019-07-21 14:05:38 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.4 for you to fetch changes up to b04f537caab4deae1b839438e8fd5ed4bc598b43: ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander (2019-08-25 09:15:17 +0200) ---------------------------------------------------------------- i.MX arm32 device tree changes for 5.4: - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and PHYTEC phyBOARD-Segin based on i.MX6ULL. - A series from Andrey Smirnov to update vf610-zii boards on I2C pinmux, switch watchdog, GPIO expander IRQ. - Move GIC node into soc node for i.MX6 SoCs. - Add OV5645 camera support for imx6qdl-wandboard board. - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri. - Use simple-mfd instead of simple-bus for i.MX6 ANATOP. - Move the native-mode property inside the display-timings node for various i.MX25 and i.MX27 boards. - Add EDMA devices for i.MX7ULP SoC. - A series from Stefan Riedmueller to update imx6ul-phytec-segin board on various devices. - Use OF graph to describe the display for opos6uldev board. - Misc random updates on i.MX7/6 boards. ---------------------------------------------------------------- Alexandre Belloni (1): ARM: dts: pbab01: correct rtc vendor Andrey Smirnov (7): ARM: dts: Add ZII support for ZII i.MX7 RMU2 board ARM: dts: vf610-zii-spb4: Drop unused pinctrl_i2c1 pinmux config ARM: dts: vf610-zii-scu4-aib: Fix pinctrl_i2c1's identation ARM: dts: vf610-zii-scu4-aib: Drop unused pinctrl_i2c3 pinmux config ARM: vf610-zii-cfu1: Add node for switch watchdog ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander André Draszik (2): ARM: dts: imx7d: cl-som-imx7: make ethernet work again ARM: dts: imx7d: cl-som-imx7: add compatible for phy Anson Huang (4): ARM: dts: imx6sx: move GIC to right location in DT ARM: dts: imx6sl: move GIC to right location in DT ARM: dts: imx6ul: move GIC to right location in DT ARM: dts: imx6sll: move GIC to right location in DT Ezequiel Garcia (1): ARM: dts: imx6qdl-wandboard: Add OV5645 camera support Fabio Estevam (3): ARM: dts: imx7d-zii-rpu2: Remove unneeded snvs_pwrkey node ARM: dts: imx7-colibri: Remove unneeded snvs_pwrkey node ARM: dts: imx6qdl-nit6xlite: Remove invalid properties Krzysztof Kozlowski (2): ARM: dts: imx: Cleanup style around assignment operator ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards Marcel Ziswiler (1): ARM: dts: imx7-colibri: make sure module supplies are always on Marco Felsch (2): ARM: dts: imx6: replace simple-bus by simple-mfd for anatop ARM: dts: imx6: drop gpmi-nand address and size cells Marek Vasut (1): ARM: dts: imx53: Update LCD panel node on M53Menlo Martin Kaiser (9): ARM: dts: imx25-pdk: native-mode is part of display-timings ARM: dts: imx27 phyCARD-S: native-mode is part of display-timings ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings ARM: dts: eukrea-mbimxsd27: native-mode is part of display-timings ARM: dts: mbimxsd25: native-mode is part of display-timings ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings ARM: dts: edb7211: native-mode is part of display-timings ARM: dts: apf27dev: native-mode is part of display-timings ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings Oleksandr Suvorov (1): ARM: dts: imx7-colibri: add recovery for I2C for iMX7 Philippe Schenker (3): ARM: dts: imx7-colibri: prepare module device tree for FlexCAN ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet ARM: dts: imx6qdl-colibri: add phy to fec Robin Gong (3): ARM: dts: imx6ul: add dma support on ecspi ARM: dts: imx6sll: correct sdma compatible ARM: dts: imx7ulp: add edma device node Stefan Agner (1): ARM: dts: imx7-colibri: disable HS400 Stefan Riedmueller (10): ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme ARM: dts: imx6ul: segin: Add boot media to dts filename ARM: dts: imx6ul: segin: Reduce eth drive strength ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts ARM: dts: imx6ul: segin: Only enable NAND if it is populated ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 ARM: dts: imx6ul: segin: Move ECSPI interface to board include file ARM: dts: imx6ul: segin: Move machine include to dts files ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Sébastien Szymanski (2): ARM: dts: opos6uldev: use OF graph to describe the display ARM: dts: imx6ul: Add csi node arch/arm/boot/dts/Makefile | 8 +- arch/arm/boot/dts/ep7211-edb7211.dts | 2 +- .../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 2 +- .../imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts | 2 +- .../imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts | 2 +- arch/arm/boot/dts/imx25-pdk.dts | 2 +- arch/arm/boot/dts/imx27-apf27dev.dts | 2 +- .../boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts | 2 +- arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 2 +- arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 2 +- arch/arm/boot/dts/imx53-m53menlo.dts | 3 +- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 + arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 - arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 73 +++- arch/arm/boot/dts/imx6qdl.dtsi | 4 +- arch/arm/boot/dts/imx6sl.dtsi | 18 +- arch/arm/boot/dts/imx6sll.dtsi | 24 +- arch/arm/boot/dts/imx6sx.dtsi | 22 +- arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts | 102 +++++ arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 420 +++++++++++++++++++++ arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi | 134 +++++++ arch/arm/boot/dts/imx6ul-opos6uldev.dts | 37 +- ...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 53 ++- ...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 42 ++- ...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 16 +- ...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 31 +- arch/arm/boot/dts/imx6ul.dtsi | 53 ++- arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi | 24 ++ .../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 93 +++++ .../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 93 +++++ .../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 45 +++ .../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 + arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 38 ++ arch/arm/boot/dts/imx7-colibri.dtsi | 86 ++++- arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 6 +- arch/arm/boot/dts/imx7d-zii-rmu2.dts | 357 ++++++++++++++++++ arch/arm/boot/dts/imx7d-zii-rpu2.dts | 4 - arch/arm/boot/dts/imx7d.dtsi | 4 +- arch/arm/boot/dts/imx7s.dtsi | 6 +- arch/arm/boot/dts/imx7ulp.dtsi | 36 +- arch/arm/boot/dts/vf610-zii-cfu1.dts | 21 +- arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 12 +- arch/arm/boot/dts/vf610-zii-spb4.dts | 7 - 44 files changed, 1741 insertions(+), 183 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (71%) rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%) rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%) rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%) create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi create mode 100644 arch/arm/boot/dts/imx7d-zii-rmu2.dts