diff mbox

[U-Boot] S5PC2XX: add the sromc header file

Message ID 4DD23309.1080002@samsung.com
State Changes Requested
Headers show

Commit Message

Minkyu Kang May 17, 2011, 8:34 a.m. UTC 
Add missing header file.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
 arch/arm/include/asm/arch-s5pc2xx/sromc.h |   51 +++++++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-s5pc2xx/sromc.h

Comments

Wolfgang Denk May 17, 2011, 8:44 a.m. UTC | #1 
Dear Minkyu Kang,

In message <4DD23309.1080002@samsung.com> you wrote:
> Add missing header file.

This should not be handled separately, but rather be squashed into the
patch that now creates the problem, i. e.

04/15 Chander Kashyap    [U-Boot] [PATCH] S5P:SROM config code moved to s5p-common directory
             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/97781


Best regards,

Wolfgang Denk
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-s5pc2xx/sromc.h b/arch/arm/include/asm/arch-s5pc2xx/sromc.h
new file mode 100644
index 0000000..f616bcb
--- /dev/null
+++ b/arch/arm/include/asm/arch-s5pc2xx/sromc.h
@@ -0,0 +1,51 @@ 
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: This file contains the register description for SROMC
+ *
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SROMC_DATA16_WIDTH(x)    (1<<((x*4)+0))
+#define SROMC_BYTE_ADDR_MODE(x)  (1<<((x*4)+1))  /* 0-> Half-word base address*/
+						/* 1-> Byte base address*/
+#define SROMC_WAIT_ENABLE(x)     (1<<((x*4)+2))
+#define SROMC_BYTE_ENABLE(x)     (1<<((x*4)+3))
+
+#define SROMC_BC_TACS(x) (x << 28) /* address set-up */
+#define SROMC_BC_TCOS(x) (x << 24) /* chip selection set-up */
+#define SROMC_BC_TACC(x) (x << 16) /* access cycle */
+#define SROMC_BC_TCOH(x) (x << 12) /* chip selection hold */
+#define SROMC_BC_TAH(x)  (x << 8)  /* address holding time */
+#define SROMC_BC_TACP(x) (x << 4)  /* page mode access cycle */
+#define SROMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5p_sromc {
+	unsigned int	bw;
+	unsigned int	bc[4];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+#endif /* __ASM_ARCH_SROMC_H_ */