diff mbox series

[V2,03/13] dt-bindings: bcm2835-cprman: Add bcm2711 support

Message ID 1565713248-4906-4-git-send-email-wahrenst@gmx.net
State Not Applicable, archived
Headers show
Series ARM: Add minimal Raspberry Pi 4 support | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Stefan Wahren Aug. 13, 2019, 4:20 p.m. UTC 
The new BCM2711 supports an additional clock for the emmc2 block.
So we need an additional compatible.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
---
 Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt | 4 +++-
 include/dt-bindings/clock/bcm2835.h                             | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

--
2.7.4

Comments

Stephen Boyd Aug. 16, 2019, 5:41 p.m. UTC | #1 
Quoting Stefan Wahren (2019-08-13 09:20:38)
> The new BCM2711 supports an additional clock for the emmc2 block.
> So we need an additional compatible.
> 
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
> Acked-by: Eric Anholt <eric@anholt.net>
> ---

If you want, just send the clk patches (this and the next three) to me
and linux-clk list as a series. I will apply them directly once the
minor comments are fixed.

>  Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt | 4 +++-
>  include/dt-bindings/clock/bcm2835.h                             | 2 ++
>  2 files changed, 5 insertions(+), 1 deletion(-)
>
Rob Herring Aug. 27, 2019, 4 p.m. UTC | #2 
On Tue, 13 Aug 2019 18:20:38 +0200, Stefan Wahren wrote:
> The new BCM2711 supports an additional clock for the emmc2 block.
> So we need an additional compatible.
> 
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
> Acked-by: Eric Anholt <eric@anholt.net>
> ---
>  Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt | 4 +++-
>  include/dt-bindings/clock/bcm2835.h                             | 2 ++
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
index dd906db..9e0b03a 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -12,7 +12,9 @@  clock generators, but a few (like the ARM or HDMI) will source from
 the PLL dividers directly.

 Required properties:
-- compatible:	Should be "brcm,bcm2835-cprman"
+- compatible:	should be one of the following,
+	"brcm,bcm2711-cprman"
+	"brcm,bcm2835-cprman"
 - #clock-cells:	Should be <1>. The permitted clock-specifier values can be
 		  found in include/dt-bindings/clock/bcm2835.h
 - reg:		Specifies base physical address and size of the registers
diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
index 2cec01f..b60c0343 100644
--- a/include/dt-bindings/clock/bcm2835.h
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -58,3 +58,5 @@ 
 #define BCM2835_CLOCK_DSI1E		48
 #define BCM2835_CLOCK_DSI0P		49
 #define BCM2835_CLOCK_DSI1P		50
+
+#define BCM2711_CLOCK_EMMC2		51