| Message ID | 20190809125515.19094-1-linus.walleij@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | gpio: aspeed: Pass irqchip when adding gpiochip | expand |
On Fri, 9 Aug 2019, at 22:25, Linus Walleij wrote: > We need to convert all old gpio irqchips to pass the irqchip > setup along when adding the gpio_chip. For more info see > drivers/gpio/TODO. > > For chained irqchips this is a pretty straight-forward > conversion. > > Cc: Joel Stanley <joel@jms.id.au> > Cc: Andrew Jeffery <andrew@aj.id.au> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> > Cc: Thierry Reding <treding@nvidia.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Hi Aspeed folks, it'd be great if you could test/review this > patch. Used it to exercise our WIP GPIO model for qemu. After fixing the qemu bugs it worked fine there. Booted it on a Witherspoon and things worked as expected there too. From a brief inspection it looks fine to me. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> > --- > drivers/gpio/gpio-aspeed.c | 60 ++++++++++++++++++-------------------- > 1 file changed, 29 insertions(+), 31 deletions(-) > > diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c > index 13d80bfbc3b6..9defe25d4721 100644 > --- a/drivers/gpio/gpio-aspeed.c > +++ b/drivers/gpio/gpio-aspeed.c > @@ -711,32 +711,6 @@ static void set_irq_valid_mask(struct aspeed_gpio *gpio) > } > } > > -static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio, > - struct platform_device *pdev) > -{ > - int rc; > - > - rc = platform_get_irq(pdev, 0); > - if (rc < 0) > - return rc; > - > - gpio->irq = rc; > - > - set_irq_valid_mask(gpio); > - > - rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip, > - 0, handle_bad_irq, IRQ_TYPE_NONE); > - if (rc) { > - dev_info(&pdev->dev, "Could not add irqchip\n"); > - return rc; > - } > - > - gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip, > - gpio->irq, aspeed_gpio_irq_handler); > - > - return 0; > -} > - > static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip, > unsigned int offset, bool enable) > { > @@ -1189,7 +1163,6 @@ static int __init aspeed_gpio_probe(struct > platform_device *pdev) > gpio->chip.set_config = aspeed_gpio_set_config; > gpio->chip.label = dev_name(&pdev->dev); > gpio->chip.base = -1; > - gpio->chip.irq.need_valid_mask = true; > > /* Allocate a cache of the output registers */ > banks = gpio->config->nr_gpios >> 5; > @@ -1212,16 +1185,41 @@ static int __init aspeed_gpio_probe(struct > platform_device *pdev) > aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM); > } > > - rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); > - if (rc < 0) > - return rc; > + /* Optionally set up an irqchip if there is an IRQ */ > + rc = platform_get_irq(pdev, 0); > + if (rc > 0) { > + struct gpio_irq_chip *girq; > + > + gpio->irq = rc; > + girq = &gpio->chip.irq; > + girq->chip = &aspeed_gpio_irqchip; > + girq->parent_handler = aspeed_gpio_irq_handler; > + girq->num_parents = 1; > + girq->parents = devm_kcalloc(&pdev->dev, 1, > + sizeof(*girq->parents), > + GFP_KERNEL); > + if (!girq->parents) > + return -ENOMEM; > + girq->parents[0] = gpio->irq; > + girq->default_type = IRQ_TYPE_NONE; > + girq->handler = handle_bad_irq; > + girq->need_valid_mask = true; > + } > > gpio->offset_timer = > devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL); > if (!gpio->offset_timer) > return -ENOMEM; > > - return aspeed_gpio_setup_irqs(gpio, pdev); > + rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); > + if (rc < 0) > + return rc; > + > + /* Now the valid mask is allocated */ > + if (gpio->irq) > + set_irq_valid_mask(gpio); > + > + return 0; > } > > static struct platform_driver aspeed_gpio_driver = { > -- > 2.21.0 > >
On Fri, 9 Aug 2019 at 12:55, Linus Walleij <linus.walleij@linaro.org> wrote: > > We need to convert all old gpio irqchips to pass the irqchip > setup along when adding the gpio_chip. For more info see > drivers/gpio/TODO. > > For chained irqchips this is a pretty straight-forward > conversion. > > Cc: Joel Stanley <joel@jms.id.au> > Cc: Andrew Jeffery <andrew@aj.id.au> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> > Cc: Thierry Reding <treding@nvidia.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Hi Aspeed folks, it'd be great if you could test/review this > patch. > --- > drivers/gpio/gpio-aspeed.c | 60 ++++++++++++++++++-------------------- > 1 file changed, 29 insertions(+), 31 deletions(-) > > diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c > index 13d80bfbc3b6..9defe25d4721 100644 > --- a/drivers/gpio/gpio-aspeed.c > +++ b/drivers/gpio/gpio-aspeed.c > @@ -711,32 +711,6 @@ static void set_irq_valid_mask(struct aspeed_gpio *gpio) > } > } > > -static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio, > - struct platform_device *pdev) > -{ > - int rc; > - > - rc = platform_get_irq(pdev, 0); > - if (rc < 0) > - return rc; > - > - gpio->irq = rc; > - > - set_irq_valid_mask(gpio); > - > - rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip, > - 0, handle_bad_irq, IRQ_TYPE_NONE); > - if (rc) { > - dev_info(&pdev->dev, "Could not add irqchip\n"); > - return rc; > - } > - > - gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip, > - gpio->irq, aspeed_gpio_irq_handler); > - > - return 0; > -} > - > static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip, > unsigned int offset, bool enable) > { > @@ -1189,7 +1163,6 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) > gpio->chip.set_config = aspeed_gpio_set_config; > gpio->chip.label = dev_name(&pdev->dev); > gpio->chip.base = -1; > - gpio->chip.irq.need_valid_mask = true; > > /* Allocate a cache of the output registers */ > banks = gpio->config->nr_gpios >> 5; > @@ -1212,16 +1185,41 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) > aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM); > } > > - rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); > - if (rc < 0) > - return rc; > + /* Optionally set up an irqchip if there is an IRQ */ > + rc = platform_get_irq(pdev, 0); > + if (rc > 0) { > + struct gpio_irq_chip *girq; > + > + gpio->irq = rc; > + girq = &gpio->chip.irq; > + girq->chip = &aspeed_gpio_irqchip; > + girq->parent_handler = aspeed_gpio_irq_handler; > + girq->num_parents = 1; > + girq->parents = devm_kcalloc(&pdev->dev, 1, > + sizeof(*girq->parents), > + GFP_KERNEL); Is there a reason this is kcalloc and not kzalloc? Other than that, Acked-by: Joel Stanley <joel@jms.id.au> Cheers, Joel > + if (!girq->parents) > + return -ENOMEM; > + girq->parents[0] = gpio->irq; > + girq->default_type = IRQ_TYPE_NONE; > + girq->handler = handle_bad_irq; > + girq->need_valid_mask = true; > + } > > gpio->offset_timer = > devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL); > if (!gpio->offset_timer) > return -ENOMEM; > > - return aspeed_gpio_setup_irqs(gpio, pdev); > + rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); > + if (rc < 0) > + return rc; > + > + /* Now the valid mask is allocated */ > + if (gpio->irq) > + set_irq_valid_mask(gpio); > + > + return 0; > } > > static struct platform_driver aspeed_gpio_driver = { > -- > 2.21.0 >
On Tue, Aug 13, 2019 at 6:44 AM Joel Stanley <joel@jms.id.au> wrote: > On Fri, 9 Aug 2019 at 12:55, Linus Walleij <linus.walleij@linaro.org> wrote: > > + girq->parents = devm_kcalloc(&pdev->dev, 1, > > + sizeof(*girq->parents), > > + GFP_KERNEL); > > Is there a reason this is kcalloc and not kzalloc? Following the pattern that we have one item of sizeof(). The parents can be several, so we try to follow this pattern so people get it right. > Acked-by: Joel Stanley <joel@jms.id.au> Thanks! Yours, Linus Walleij
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 13d80bfbc3b6..9defe25d4721 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -711,32 +711,6 @@ static void set_irq_valid_mask(struct aspeed_gpio *gpio) } } -static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio, - struct platform_device *pdev) -{ - int rc; - - rc = platform_get_irq(pdev, 0); - if (rc < 0) - return rc; - - gpio->irq = rc; - - set_irq_valid_mask(gpio); - - rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip, - 0, handle_bad_irq, IRQ_TYPE_NONE); - if (rc) { - dev_info(&pdev->dev, "Could not add irqchip\n"); - return rc; - } - - gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip, - gpio->irq, aspeed_gpio_irq_handler); - - return 0; -} - static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip, unsigned int offset, bool enable) { @@ -1189,7 +1163,6 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) gpio->chip.set_config = aspeed_gpio_set_config; gpio->chip.label = dev_name(&pdev->dev); gpio->chip.base = -1; - gpio->chip.irq.need_valid_mask = true; /* Allocate a cache of the output registers */ banks = gpio->config->nr_gpios >> 5; @@ -1212,16 +1185,41 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM); } - rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); - if (rc < 0) - return rc; + /* Optionally set up an irqchip if there is an IRQ */ + rc = platform_get_irq(pdev, 0); + if (rc > 0) { + struct gpio_irq_chip *girq; + + gpio->irq = rc; + girq = &gpio->chip.irq; + girq->chip = &aspeed_gpio_irqchip; + girq->parent_handler = aspeed_gpio_irq_handler; + girq->num_parents = 1; + girq->parents = devm_kcalloc(&pdev->dev, 1, + sizeof(*girq->parents), + GFP_KERNEL); + if (!girq->parents) + return -ENOMEM; + girq->parents[0] = gpio->irq; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + girq->need_valid_mask = true; + } gpio->offset_timer = devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL); if (!gpio->offset_timer) return -ENOMEM; - return aspeed_gpio_setup_irqs(gpio, pdev); + rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (rc < 0) + return rc; + + /* Now the valid mask is allocated */ + if (gpio->irq) + set_irq_valid_mask(gpio); + + return 0; } static struct platform_driver aspeed_gpio_driver = {
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Hi Aspeed folks, it'd be great if you could test/review this patch. --- drivers/gpio/gpio-aspeed.c | 60 ++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 31 deletions(-)