new file mode 100644
@@ -0,0 +1,336 @@
+# SPDX-License-Identifier: (GPL-2.0)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra30-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 SoC External Memory Controller
+
+maintainers:
+ - Dmitry Osipenko <digetx@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ The EMC interfaces with the off-chip SDRAM to service the request stream
+ sent from Memory Controller. The EMC also has various performance-affecting
+ settings beyond the obvious SDRAM configuration parameters and initialization
+ settings. Tegra30 EMC supports multiple JEDEC standard protocols: LPDDR2,
+ LPDDR3, and DDR3.
+
+properties:
+ compatible:
+ const: nvidia,tegra30-emc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ nvidia,memory-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle of the Memory Controller node.
+
+patternProperties:
+ "^emc-timings-[0-9]+$":
+ type: object
+ properties:
+ nvidia,ram-code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Value of RAM_CODE this timing set is used for.
+
+ patternProperties:
+ "^timing-[0-9]+$":
+ type: object
+ properties:
+ clock-frequency:
+ description:
+ Memory clock rate in Hz.
+ minimum: 1000000
+ maximum: 900000000
+
+ nvidia,emc-auto-cal-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Pad calibration interval in microseconds.
+ minimum: 0
+ maximum: 2097151
+
+ nvidia,emc-mode-1:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Mode Register 1.
+
+ nvidia,emc-mode-2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Mode Register 2.
+
+ nvidia,emc-mode-reset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Mode Register 0.
+
+ nvidia,emc-zcal-cnt-long:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of EMC clocks to wait before issuing any commands after
+ sending ZCAL_MRW_CMD.
+ minimum: 0
+ maximum: 1023
+
+ nvidia,emc-cfg-dyn-self-ref:
+ type: boolean
+ description:
+ Dynamic self-refresh enabled.
+
+ nvidia,emc-cfg-periodic-qrst:
+ type: boolean
+ description:
+ FBIO "read" FIFO periodic resetting enabled.
+
+ nvidia,emc-configuration:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ EMC timing characterization data. These are the registers
+ (see section "18.13.2 EMC Registers" in the TRM) whose values
+ need to be specified, according to the board documentation.
+ items:
+ - description: EMC_RC
+ - description: EMC_RFC
+ - description: EMC_RAS
+ - description: EMC_RP
+ - description: EMC_R2W
+ - description: EMC_W2R
+ - description: EMC_R2P
+ - description: EMC_W2P
+ - description: EMC_RD_RCD
+ - description: EMC_WR_RCD
+ - description: EMC_RRD
+ - description: EMC_REXT
+ - description: EMC_WEXT
+ - description: EMC_WDV
+ - description: EMC_QUSE
+ - description: EMC_QRST
+ - description: EMC_QSAFE
+ - description: EMC_RDV
+ - description: EMC_REFRESH
+ - description: EMC_BURST_REFRESH_NUM
+ - description: EMC_PRE_REFRESH_REQ_CNT
+ - description: EMC_PDEX2WR
+ - description: EMC_PDEX2RD
+ - description: EMC_PCHG2PDEN
+ - description: EMC_ACT2PDEN
+ - description: EMC_AR2PDEN
+ - description: EMC_RW2PDEN
+ - description: EMC_TXSR
+ - description: EMC_TXSRDLL
+ - description: EMC_TCKE
+ - description: EMC_TFAW
+ - description: EMC_TRPAB
+ - description: EMC_TCLKSTABLE
+ - description: EMC_TCLKSTOP
+ - description: EMC_TREFBW
+ - description: EMC_QUSE_EXTRA
+ - description: EMC_FBIO_CFG6
+ - description: EMC_ODT_WRITE
+ - description: EMC_ODT_READ
+ - description: EMC_FBIO_CFG5
+ - description: EMC_CFG_DIG_DLL
+ - description: EMC_CFG_DIG_DLL_PERIOD
+ - description: EMC_DLL_XFORM_DQS0
+ - description: EMC_DLL_XFORM_DQS1
+ - description: EMC_DLL_XFORM_DQS2
+ - description: EMC_DLL_XFORM_DQS3
+ - description: EMC_DLL_XFORM_DQS4
+ - description: EMC_DLL_XFORM_DQS5
+ - description: EMC_DLL_XFORM_DQS6
+ - description: EMC_DLL_XFORM_DQS7
+ - description: EMC_DLL_XFORM_QUSE0
+ - description: EMC_DLL_XFORM_QUSE1
+ - description: EMC_DLL_XFORM_QUSE2
+ - description: EMC_DLL_XFORM_QUSE3
+ - description: EMC_DLL_XFORM_QUSE4
+ - description: EMC_DLL_XFORM_QUSE5
+ - description: EMC_DLL_XFORM_QUSE6
+ - description: EMC_DLL_XFORM_QUSE7
+ - description: EMC_DLI_TRIM_TXDQS0
+ - description: EMC_DLI_TRIM_TXDQS1
+ - description: EMC_DLI_TRIM_TXDQS2
+ - description: EMC_DLI_TRIM_TXDQS3
+ - description: EMC_DLI_TRIM_TXDQS4
+ - description: EMC_DLI_TRIM_TXDQS5
+ - description: EMC_DLI_TRIM_TXDQS6
+ - description: EMC_DLI_TRIM_TXDQS7
+ - description: EMC_DLL_XFORM_DQ0
+ - description: EMC_DLL_XFORM_DQ1
+ - description: EMC_DLL_XFORM_DQ2
+ - description: EMC_DLL_XFORM_DQ3
+ - description: EMC_XM2CMDPADCTRL
+ - description: EMC_XM2DQSPADCTRL2
+ - description: EMC_XM2DQPADCTRL2
+ - description: EMC_XM2CLKPADCTRL
+ - description: EMC_XM2COMPPADCTRL
+ - description: EMC_XM2VTTGENPADCTRL
+ - description: EMC_XM2VTTGENPADCTRL2
+ - description: EMC_XM2QUSEPADCTRL
+ - description: EMC_XM2DQSPADCTRL3
+ - description: EMC_CTT_TERM_CTRL
+ - description: EMC_ZCAL_INTERVAL
+ - description: EMC_ZCAL_WAIT_CNT
+ - description: EMC_MRS_WAIT_CNT
+ - description: EMC_AUTO_CAL_CONFIG
+ - description: EMC_CTT
+ - description: EMC_CTT_DURATION
+ - description: EMC_DYN_SELF_REF_CONTROL
+ - description: EMC_FBIO_SPARE
+ - description: EMC_CFG_RSV
+
+ required:
+ - clock-frequency
+ - nvidia,emc-auto-cal-interval
+ - nvidia,emc-mode-1
+ - nvidia,emc-mode-2
+ - nvidia,emc-mode-reset
+ - nvidia,emc-zcal-cnt-long
+ - nvidia,emc-configuration
+
+ additionalProperties: false
+
+ required:
+ - nvidia,ram-code
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ external-memory-controller@7000f400 {
+ compatible = "nvidia,tegra30-emc";
+ reg = <0x7000f400 0x400>;
+ interrupts = <0 78 4>;
+ clocks = <&tegra_car 57>;
+
+ nvidia,memory-controller = <&mc>;
+
+ emc-timings-1 {
+ nvidia,ram-code = <1>;
+
+ timing-667000000 {
+ clock-frequency = <667000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200018>;
+ nvidia,emc-mode-reset = <0x80000b71>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = <
+ 0x00000020 /* EMC_RC */
+ 0x0000006a /* EMC_RFC */
+ 0x00000017 /* EMC_RAS */
+ 0x00000007 /* EMC_RP */
+ 0x00000005 /* EMC_R2W */
+ 0x0000000c /* EMC_W2R */
+ 0x00000003 /* EMC_R2P */
+ 0x00000011 /* EMC_W2P */
+ 0x00000007 /* EMC_RD_RCD */
+ 0x00000007 /* EMC_WR_RCD */
+ 0x00000002 /* EMC_RRD */
+ 0x00000001 /* EMC_REXT */
+ 0x00000000 /* EMC_WEXT */
+ 0x00000007 /* EMC_WDV */
+ 0x0000000a /* EMC_QUSE */
+ 0x00000009 /* EMC_QRST */
+ 0x0000000b /* EMC_QSAFE */
+ 0x00000011 /* EMC_RDV */
+ 0x00001412 /* EMC_REFRESH */
+ 0x00000000 /* EMC_BURST_REFRESH_NUM */
+ 0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+ 0x00000002 /* EMC_PDEX2WR */
+ 0x0000000e /* EMC_PDEX2RD */
+ 0x00000001 /* EMC_PCHG2PDEN */
+ 0x00000000 /* EMC_ACT2PDEN */
+ 0x0000000c /* EMC_AR2PDEN */
+ 0x00000016 /* EMC_RW2PDEN */
+ 0x00000072 /* EMC_TXSR */
+ 0x00000200 /* EMC_TXSRDLL */
+ 0x00000005 /* EMC_TCKE */
+ 0x00000015 /* EMC_TFAW */
+ 0x00000000 /* EMC_TRPAB */
+ 0x00000006 /* EMC_TCLKSTABLE */
+ 0x00000007 /* EMC_TCLKSTOP */
+ 0x00001453 /* EMC_TREFBW */
+ 0x0000000b /* EMC_QUSE_EXTRA */
+ 0x00000006 /* EMC_FBIO_CFG6 */
+ 0x00000000 /* EMC_ODT_WRITE */
+ 0x00000000 /* EMC_ODT_READ */
+ 0x00005088 /* EMC_FBIO_CFG5 */
+ 0xf00b0191 /* EMC_CFG_DIG_DLL */
+ 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+ 0x00000008 /* EMC_DLL_XFORM_DQS0 */
+ 0x00000008 /* EMC_DLL_XFORM_DQS1 */
+ 0x00000008 /* EMC_DLL_XFORM_DQS2 */
+ 0x00000008 /* EMC_DLL_XFORM_DQS3 */
+ 0x0000000a /* EMC_DLL_XFORM_DQS4 */
+ 0x0000000a /* EMC_DLL_XFORM_DQS5 */
+ 0x0000000a /* EMC_DLL_XFORM_DQS6 */
+ 0x0000000a /* EMC_DLL_XFORM_DQS7 */
+ 0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+ 0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+ 0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+ 0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+ 0x0000000a /* EMC_DLL_XFORM_DQ0 */
+ 0x0000000a /* EMC_DLL_XFORM_DQ1 */
+ 0x0000000a /* EMC_DLL_XFORM_DQ2 */
+ 0x0000000a /* EMC_DLL_XFORM_DQ3 */
+ 0x000002a0 /* EMC_XM2CMDPADCTRL */
+ 0x0800013d /* EMC_XM2DQSPADCTRL2 */
+ 0x22220000 /* EMC_XM2DQPADCTRL2 */
+ 0x77fff884 /* EMC_XM2CLKPADCTRL */
+ 0x01f1f501 /* EMC_XM2COMPPADCTRL */
+ 0x07077404 /* EMC_XM2VTTGENPADCTRL */
+ 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+ 0x080001e8 /* EMC_XM2QUSEPADCTRL */
+ 0x0c000021 /* EMC_XM2DQSPADCTRL3 */
+ 0x00000802 /* EMC_CTT_TERM_CTRL */
+ 0x00020000 /* EMC_ZCAL_INTERVAL */
+ 0x00000100 /* EMC_ZCAL_WAIT_CNT */
+ 0x0155000c /* EMC_MRS_WAIT_CNT */
+ 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+ 0x00000000 /* EMC_CTT */
+ 0x00000000 /* EMC_CTT_DURATION */
+ 0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+ 0xe8000000 /* EMC_FBIO_SPARE */
+ 0xff00ff49 /* EMC_CFG_RSV */
+ >;
+ };
+ };
+ };