mbox

[U-Boot] Pull request: u-boot-arm/master

Message ID 4DCAFA98.2020205@aribaud.net
State Accepted
Delegated to: Wolfgang Denk
Headers show

Pull-request

git://git.denx.de/u-boot-arm master

Message

Albert ARIBAUD May 11, 2011, 9:07 p.m. UTC
Hi Wolfgang,

The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:

   keymile boards: move keymile specific header in subdir (2011-05-10 
23:22:49 +0200)

are available in the git repository at:
   git://git.denx.de/u-boot-arm master

Ben Gardiner (1):
       da850evm: fix NAND WSTROBE and TA timings

Clint Adams (4):
       Rename openrd_base files to openrd
       Add definitions for OpenRD-Client and OpenRD-Ultimate
       Initialize second PHY on OpenRD-Client and OpenRD-Ultimate
       Enable multiple fs options for Marvell SoC family on OpenRD boards

Fabio Estevam (2):
       MX31: mx31pdk: Add watchdog support
       gpio: imx: Fix return value on error

Simon Guinot (2):
       Kirkwood: allow to override CONFIG_SYS_TCLK
       mv-common.h: fix DRAM banks configuration

Stefano Babic (2):
       MX31: removed warning due to missing prototype
       MX31: change return value of get_cpu_rev

  MAKEALL                                            |    2 +
  arch/arm/cpu/arm1136/mx31/generic.c                |   31 
+++++++++++--------
  arch/arm/include/asm/arch-kirkwood/kw88f6281.h     |    8 +++--
  arch/arm/include/asm/arch-mx31/clock.h             |    1 +
  arch/arm/include/asm/arch-mx31/imx-regs.h          |    2 +-
  board/Marvell/{openrd_base => openrd}/Makefile     |    2 +-
  board/Marvell/{openrd_base => openrd}/kwbimage.cfg |    0
  .../{openrd_base/openrd_base.c => openrd/openrd.c} |   33 
+++++++++++++++++---
  .../{openrd_base/openrd_base.h => openrd/openrd.h} |    0
  board/davinci/da8xxevm/da850evm.c                  |    4 +-
  board/freescale/mx31pdk/mx31pdk.c                  |   16 +++++++++
  boards.cfg                                         |    4 ++-
  drivers/gpio/mxc_gpio.c                            |    5 ++-
  include/configs/mv-common.h                        |    8 ++--
  include/configs/mx31pdk.h                          |    3 ++
  include/configs/{openrd_base.h => openrd.h}        |   33 
+++++++++++++++++---
  16 files changed, 115 insertions(+), 37 deletions(-)
  rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
  rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
  rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (80%)
  rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (100%)
  rename include/configs/{openrd_base.h => openrd.h} (81%)

Amicalement,

Comments

Rogan Dawes May 11, 2011, 10:11 p.m. UTC | #1
On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> Simon Guinot (2):
>        mv-common.h: fix DRAM banks configuration

I think Prafulla already accepted my own change to fix this. Not sure
which one is considered better.

I had not actually intended mine for merging (no sign off), and had
simply posted the patch as part of my DNS323 series. However, Prafulla
saw it and merged it some time ago.

Regards,

Rogan
Albert ARIBAUD May 12, 2011, 5:41 a.m. UTC | #2
Hi Rogan,

Le 12/05/2011 00:11, Rogan Dawes a écrit :
> On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
>> Simon Guinot (2):
>>         mv-common.h: fix DRAM banks configuration
>
> I think Prafulla already accepted my own change to fix this. Not sure
> which one is considered better.

Both your and Simon's changes would come from Prafulla's Marvell tree 
actually.

Prafulla, can you comment?

Amicalement,
Prafulla Wadaskar May 12, 2011, 8:48 a.m. UTC | #3
> -----Original Message-----
> From: Albert ARIBAUD [mailto:albert.u.boot@aribaud.net]
> Sent: Thursday, May 12, 2011 11:11 AM
> To: Rogan Dawes
> Cc: Wolfgang Denk; u-boot@lists.denx.de; Prafulla Wadaskar
> Subject: Re: Pull request: u-boot-arm/master
> 
> Hi Rogan,
> 
> Le 12/05/2011 00:11, Rogan Dawes a écrit :
> > On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> >> Simon Guinot (2):
> >>         mv-common.h: fix DRAM banks configuration
> >
> > I think Prafulla already accepted my own change to fix this. Not sure
> > which one is considered better.

Yes, This patch is accepted and applied to u-boot-marvell.git, the same is pulled on u-boot-arm.git too.

> 
> Both your and Simon's changes would come from Prafulla's Marvell tree
> actually.
> 
> Prafulla, can you comment?

Hi Simon
You may rebase your development and send new patch series excluding applied patches and considering review comments so far.

Regards..
Prafulla . .
Simon Guinot May 12, 2011, 9:06 a.m. UTC | #4
Hi Prafulla,

On Thu, May 12, 2011 at 01:48:34AM -0700, Prafulla Wadaskar wrote:
> 
> 
> > -----Original Message-----
> > From: Albert ARIBAUD [mailto:albert.u.boot@aribaud.net]
> > Sent: Thursday, May 12, 2011 11:11 AM
> > To: Rogan Dawes
> > Cc: Wolfgang Denk; u-boot@lists.denx.de; Prafulla Wadaskar
> > Subject: Re: Pull request: u-boot-arm/master
> > 
> > Hi Rogan,
> > 
> > Le 12/05/2011 00:11, Rogan Dawes a écrit :
> > > On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> > >> Simon Guinot (2):
> > >>         mv-common.h: fix DRAM banks configuration
> > >
> > > I think Prafulla already accepted my own change to fix this. Not sure
> > > which one is considered better.
> 
> Yes, This patch is accepted and applied to u-boot-marvell.git, the same is pulled on u-boot-arm.git too.
> 
> > 
> > Both your and Simon's changes would come from Prafulla's Marvell tree
> > actually.
> > 
> > Prafulla, can you comment?
> 
> Hi Simon
> You may rebase your development and send new patch series excluding applied patches and considering review comments so far.

IMHO, the v6 series is in a good shape. All the review comments have
been addressed and all the accepted patches have been dropped. Moreover,
the merge with current u-boot-{arm,marvell} git tree is rather trivial.

Anyway, I will post again my last stagged two patches.

Regards,

Simon
Simon Guinot May 12, 2011, 9:12 a.m. UTC | #5
Hi Rogan,

On Thu, May 12, 2011 at 12:11:41AM +0200, Rogan Dawes wrote:
> On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> > Simon Guinot (2):
> >        mv-common.h: fix DRAM banks configuration
> 
> I think Prafulla already accepted my own change to fix this. Not sure
> which one is considered better.

The two patches are addressing different issues (DRAM configuration
against detection). They are needed both.

Regards,

Simon
Wolfgang Denk May 12, 2011, 5:27 p.m. UTC | #6
Dear Albert ARIBAUD,

In message <4DCAFA98.2020205@aribaud.net> you wrote:
> Hi Wolfgang,
> 
> The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
> 
>    keymile boards: move keymile specific header in subdir (2011-05-10 
> 23:22:49 +0200)
> 
> are available in the git repository at:
>    git://git.denx.de/u-boot-arm master
> 
> Ben Gardiner (1):
>        da850evm: fix NAND WSTROBE and TA timings
> 
> Clint Adams (4):
>        Rename openrd_base files to openrd
>        Add definitions for OpenRD-Client and OpenRD-Ultimate
>        Initialize second PHY on OpenRD-Client and OpenRD-Ultimate
>        Enable multiple fs options for Marvell SoC family on OpenRD boards
> 
> Fabio Estevam (2):
>        MX31: mx31pdk: Add watchdog support
>        gpio: imx: Fix return value on error
> 
> Simon Guinot (2):
>        Kirkwood: allow to override CONFIG_SYS_TCLK
>        mv-common.h: fix DRAM banks configuration
> 
> Stefano Babic (2):
>        MX31: removed warning due to missing prototype
>        MX31: change return value of get_cpu_rev
> 
>   MAKEALL                                            |    2 +
>   arch/arm/cpu/arm1136/mx31/generic.c                |   31 
> +++++++++++--------
>   arch/arm/include/asm/arch-kirkwood/kw88f6281.h     |    8 +++--
>   arch/arm/include/asm/arch-mx31/clock.h             |    1 +
>   arch/arm/include/asm/arch-mx31/imx-regs.h          |    2 +-
>   board/Marvell/{openrd_base => openrd}/Makefile     |    2 +-
>   board/Marvell/{openrd_base => openrd}/kwbimage.cfg |    0
>   .../{openrd_base/openrd_base.c => openrd/openrd.c} |   33 
> +++++++++++++++++---
>   .../{openrd_base/openrd_base.h => openrd/openrd.h} |    0
>   board/davinci/da8xxevm/da850evm.c                  |    4 +-
>   board/freescale/mx31pdk/mx31pdk.c                  |   16 +++++++++
>   boards.cfg                                         |    4 ++-
>   drivers/gpio/mxc_gpio.c                            |    5 ++-
>   include/configs/mv-common.h                        |    8 ++--
>   include/configs/mx31pdk.h                          |    3 ++
>   include/configs/{openrd_base.h => openrd.h}        |   33 
> +++++++++++++++++---
>   16 files changed, 115 insertions(+), 37 deletions(-)
>   rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
>   rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
>   rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (80%)
>   rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (100%)
>   rename include/configs/{openrd_base.h => openrd.h} (81%)

Applied, thanks.

Best regards,

Wolfgang Denk
Dirk Behme May 14, 2011, 6:38 p.m. UTC | #7
On 12.05.2011 19:27, Wolfgang Denk wrote:
> Dear Albert ARIBAUD,
>
> In message<4DCAFA98.2020205@aribaud.net>  you wrote:
>> Hi Wolfgang,
>>
>> The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
>>
>>     keymile boards: move keymile specific header in subdir (2011-05-10
>> 23:22:49 +0200)
>>
>> are available in the git repository at:
>>     git://git.denx.de/u-boot-arm master
...
>
> Applied, thanks.

Doing a ./MAKEALL ARMV7 on the recent git head 
(91081e01b10d64e99dc485e477e6ae3b1171e8ce Revert "Fix building tools 
alone with host compiler") I get the following errors/warnings. I've 
done a quick scan of the available patches at the mailing list and 
tried to add the available uncommitted fixes. Anybody likes apply them 
or send patches where I haven't found any?

omap3_beagle:
beagle.c: In function 'misc_init_r':
beagle.c:174: warning: initialization from incompatible pointer type
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=d4e53f063dd25e071444b87303573e7440deeb89
Fix:
http://lists.denx.de/pipermail/u-boot/2011-April/091030.html

omap3_beagle:
omap3_overo:
igep0030:
igep0020:
omap_hsmmc.c: In function 'omap_mmc_init':
omap_hsmmc.c:474: warning: implicit declaration of function 
'get_cpu_family'
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_rev'
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=4ca9244d74f146a0605f5bee28a66e39aae88d3e
Fix: ? (-> fix missing function prototype)


s5p_goni: 

s5p_mmc.c: In function 's5p_mmc_initialize': 

s5p_mmc.c:469: error: 'struct mmc' has no member named 'm_bmax'
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=8feafcc49c0b7a9c541904f95a43dbef2fecc38b
Fix: ? (-> fix typo)


a9x4_ct_vxp:
ca9x4_ct_vxp.c: In function 'cpu_mmc_init':
ca9x4_ct_vxp.c:93: warning: implicit declaration of function 
'arm_pl180_mmci_init'
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=f0c64526b7e51ba997a0f1baf9e74e6d497b957e
Fix: ? (-> fix missing function prototype)


mx51evk:
In file included from include/config.h:6,
                  from include/common.h:37: 

include/configs/mx51evk.h:229:1: warning: "CONFIG_OF_LIBFDT" redefined
include/configs/mx51evk.h:51:1: warning: this is the location of the 
previous definition
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=dcd441c32560a823019c720fb034ff425efbc376
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=2fa8ca98c37d5b1bb0328b19ddb7e9d162cd9683
Fix:
http://patchwork.ozlabs.org/patch/93978/

Many thanks

Dirk