| Message ID | 20190628013826.4705-2-xiaowei.bao@nxp.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [PATCHv3,1/2] PCI: layerscape: Add the bar_fixed_64bit property in EP driver. | expand |
| Context | Check | Description |
|---|---|---|
| snowpatch_ozlabs/apply_patch | success | Successfully applied on branch next (c7d64b560ce80d8c44f082eee8352f0778a73195) |
| snowpatch_ozlabs/build-ppc64le | success | Build succeeded |
| snowpatch_ozlabs/build-ppc64be | success | Build succeeded |
| snowpatch_ozlabs/build-ppc64e | success | Build succeeded |
| snowpatch_ozlabs/build-pmac32 | success | Build succeeded |
| snowpatch_ozlabs/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 40 lines checked |
On Fri, Jun 28, 2019 at 09:38:26AM +0800, Xiaowei Bao wrote: > Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately. > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > --- > v2: > - No change. > v3: > - modify the commit message. > > drivers/pci/controller/dwc/Kconfig | 20 ++++++++++++++++++-- > drivers/pci/controller/dwc/Makefile | 3 ++- > 2 files changed, 20 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig > index a6ce1ee..a41ccf5 100644 > --- a/drivers/pci/controller/dwc/Kconfig > +++ b/drivers/pci/controller/dwc/Kconfig > @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP > DesignWare core functions to implement the driver. > > config PCI_LAYERSCAPE > - bool "Freescale Layerscape PCIe controller" > + bool "Freescale Layerscape PCIe controller - Host mode" > depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) > depends on PCI_MSI_IRQ_DOMAIN > select MFD_SYSCON > select PCIE_DW_HOST > help > - Say Y here if you want PCIe controller support on Layerscape SoCs. > + Say Y here if you want to enable PCIe controller support on Layerscape > + SoCs to work in Host mode. > + This controller can work either as EP or RC. The RCW[HOST_AGT_PEX] What's "The RCW" ? This entry should explain why a kernel configuration should enable it. Lorenzo > + determines which PCIe controller works in EP mode and which PCIe > + controller works in RC mode. > + > +config PCI_LAYERSCAPE_EP > + bool "Freescale Layerscape PCIe controller - Endpoint mode" > + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) > + depends on PCI_ENDPOINT > + select PCIE_DW_EP > + help > + Say Y here if you want to enable PCIe controller support on Layerscape > + SoCs to work in Endpoint mode. > + This controller can work either as EP or RC. The RCW[HOST_AGT_PEX] > + determines which PCIe controller works in EP mode and which PCIe > + controller works in RC mode. > > config PCI_HISI > depends on OF && (ARM64 || COMPILE_TEST) > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile > index b085dfd..824fde7 100644 > --- a/drivers/pci/controller/dwc/Makefile > +++ b/drivers/pci/controller/dwc/Makefile > @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o > obj-$(CONFIG_PCI_IMX6) += pci-imx6.o > obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o > obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o > -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o > +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o > +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o > obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o > obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o > obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o > -- > 1.7.1 >
> -----Original Message----- > From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Sent: 2019年8月12日 18:06 > To: Xiaowei Bao <xiaowei.bao@nxp.com> > Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; > arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian > <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang > <roy.zang@nxp.com>; kstewart@linuxfoundation.org; > pombredanne@nexb.com; shawn.lin@rock-chips.com; > linux-pci@vger.kernel.org; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linuxppc-dev@lists.ozlabs.org > Subject: [EXT] Re: [PATCHv3 2/2] PCI: layerscape: Add > CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately > > Caution: EXT Email > > On Fri, Jun 28, 2019 at 09:38:26AM +0800, Xiaowei Bao wrote: > > Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately. > > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > > --- > > v2: > > - No change. > > v3: > > - modify the commit message. > > > > drivers/pci/controller/dwc/Kconfig | 20 ++++++++++++++++++-- > > drivers/pci/controller/dwc/Makefile | 3 ++- > > 2 files changed, 20 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/Kconfig > > b/drivers/pci/controller/dwc/Kconfig > > index a6ce1ee..a41ccf5 100644 > > --- a/drivers/pci/controller/dwc/Kconfig > > +++ b/drivers/pci/controller/dwc/Kconfig > > @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP > > DesignWare core functions to implement the driver. > > > > config PCI_LAYERSCAPE > > - bool "Freescale Layerscape PCIe controller" > > + bool "Freescale Layerscape PCIe controller - Host mode" > > depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) > > depends on PCI_MSI_IRQ_DOMAIN > > select MFD_SYSCON > > select PCIE_DW_HOST > > help > > - Say Y here if you want PCIe controller support on Layerscape SoCs. > > + Say Y here if you want to enable PCIe controller support on > Layerscape > > + SoCs to work in Host mode. > > + This controller can work either as EP or RC. The > > + RCW[HOST_AGT_PEX] > > What's "The RCW" ? This entry should explain why a kernel configuration > should enable it. [Xiaowei Bao] Hi Lorenzo, the RCW full name is "reset configuration word", it can be built to a bin file and program to the flash, rather than configure by kernel, almost the NXP Layerscaple platform use this way. > > Lorenzo > > > + determines which PCIe controller works in EP mode and which > PCIe > > + controller works in RC mode. > > + > > +config PCI_LAYERSCAPE_EP > > + bool "Freescale Layerscape PCIe controller - Endpoint mode" > > + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) > > + depends on PCI_ENDPOINT > > + select PCIE_DW_EP > > + help > > + Say Y here if you want to enable PCIe controller support on > Layerscape > > + SoCs to work in Endpoint mode. > > + This controller can work either as EP or RC. The > RCW[HOST_AGT_PEX] > > + determines which PCIe controller works in EP mode and which > PCIe > > + controller works in RC mode. > > > > config PCI_HISI > > depends on OF && (ARM64 || COMPILE_TEST) diff --git > > a/drivers/pci/controller/dwc/Makefile > > b/drivers/pci/controller/dwc/Makefile > > index b085dfd..824fde7 100644 > > --- a/drivers/pci/controller/dwc/Makefile > > +++ b/drivers/pci/controller/dwc/Makefile > > @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o > > obj-$(CONFIG_PCI_IMX6) += pci-imx6.o > > obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o > > obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o > > -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o > > +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o > > +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o > > obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o > > obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o > > obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o > > -- > > 1.7.1 > >
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index a6ce1ee..a41ccf5 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP DesignWare core functions to implement the driver. config PCI_LAYERSCAPE - bool "Freescale Layerscape PCIe controller" + bool "Freescale Layerscape PCIe controller - Host mode" depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON select PCIE_DW_HOST help - Say Y here if you want PCIe controller support on Layerscape SoCs. + Say Y here if you want to enable PCIe controller support on Layerscape + SoCs to work in Host mode. + This controller can work either as EP or RC. The RCW[HOST_AGT_PEX] + determines which PCIe controller works in EP mode and which PCIe + controller works in RC mode. + +config PCI_LAYERSCAPE_EP + bool "Freescale Layerscape PCIe controller - Endpoint mode" + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) + depends on PCI_ENDPOINT + select PCIE_DW_EP + help + Say Y here if you want to enable PCIe controller support on Layerscape + SoCs to work in Endpoint mode. + This controller can work either as EP or RC. The RCW[HOST_AGT_PEX] + determines which PCIe controller works in EP mode and which PCIe + controller works in RC mode. config PCI_HISI depends on OF && (ARM64 || COMPILE_TEST) diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile index b085dfd..824fde7 100644 --- a/drivers/pci/controller/dwc/Makefile +++ b/drivers/pci/controller/dwc/Makefile @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> --- v2: - No change. v3: - modify the commit message. drivers/pci/controller/dwc/Kconfig | 20 ++++++++++++++++++-- drivers/pci/controller/dwc/Makefile | 3 ++- 2 files changed, 20 insertions(+), 3 deletions(-)