| Message ID | 1563541046-6432-1-git-send-email-patrick.delaunay@st.com |
|---|---|
| Headers | show |
| Series | dfu: update dfu stack and use them for stm32mp1 | expand |
Hi Patrick, > This serie based on v2019.07 propose some update on the DFU stack: > - add capability to have several DFU backend running in parallel > - add MTD backend for NAND, NOR or SPI-NAND > - add VIRTUAL backend for board/command specific behavior > - add some weak callback > > To test the feature and as example, I update the stm32mp1 > to use the new features (tested with command "dfu 0") > > This serie prepares the DFU backend for communication with > STM32CubeProgrammer on stm32mp1 platform (stm32prog command). > This STMicroelectronics tool is based on DFU protocol and > update the boot devices and the OTPs on the ST boards. > Thanks for such great enhancement on DFU. I've added Heiko to CC, so he also would be aware of your work (as some of his boards use DFU for update). Please add detailed documentation entry (as I've indicated in other patches reviewed) for above features. The roadmap: - Please send v1 (without RFC). (Please run buildman on several siemens and trats/trats2/odroid-x* boards) - I will test it on odroid-XU3 (and probably Heiko would test it for regression). A side question - would you need in some point updating envs via DFU (no matter if those would be a whole image created with mkimage or an individual one) ? > > > Patrick Delaunay (14): > dfu: cosmetic: cleanup sf to avoid checkpatch error > dfu: sf: add partition support for nor backend > dfu: prepare the support of multiple interface > dfu: allow to manage DFU on several devices > dfu: allow read with 0 data for EOF indication > dfu: add backend for MTD device > dfu: add partition support for MTD backend > dfu: add DFU virtual backend > dfu: add callback for flush and initiated operation > stm32mp1: activate DFU support and command MTD > stm32mp1: activate SET_DFU_ALT_INFO > stp32mp1: configs: activate CONFIG_MTD_SPI_NAND > stm32mp1: board: add spi nand support > stm32mp1: add support for virtual partition read > > board/st/stm32mp1/README | 111 +++++++++++++ > board/st/stm32mp1/stm32mp1.c | 165 ++++++++++++++++++- > cmd/dfu.c | 21 ++- > configs/stm32mp15_basic_defconfig | 6 + > configs/stm32mp15_trusted_defconfig | 6 + > drivers/dfu/Kconfig | 13 ++ > drivers/dfu/Makefile | 2 + > drivers/dfu/dfu.c | 145 +++++++++++++++-- > drivers/dfu/dfu_mtd.c | 306 > ++++++++++++++++++++++++++++++++++++ > drivers/dfu/dfu_sf.c | 55 ++++++- > drivers/dfu/dfu_virt.c | 49 ++++++ > include/configs/stm32mp1.h | 38 ++++- > include/dfu.h | 51 ++++++ 13 files changed, > 939 insertions(+), 29 deletions(-) create mode 100644 > drivers/dfu/dfu_mtd.c create mode 100644 drivers/dfu/dfu_virt.c > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de