| Message ID | 1563460986-345-1-git-send-email-breno.lima@nxp.com |
|---|---|
| State | Not Applicable |
| Delegated to: | Stefano Babic |
| Headers | show |
| Series | [U-Boot] mx6ulevk: Add support for SDP boot in SPL target | expand |
On Thu, Jul 18, 2019 at 11:43 AM Breno Matheus Lima <breno.lima@nxp.com> wrote: > > Currently it's not possible to boot mx6ulevk board using > imx_usb_loader tool: > > U-Boot SPL 2018.03 (Jul 18 2019 - 10:05:17 -0300) > SPL: Unsupported Boot Device! > SPL: failed to boot from all boot devices > > Enable necessary configuration in defconfig file. > > Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 1d777b5fb2..4d12a7cb16 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -19,9 +19,13 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_SPL=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y @@ -67,4 +71,9 @@ CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y CONFIG_VIDEO=y
Currently it's not possible to boot mx6ulevk board using imx_usb_loader tool: U-Boot SPL 2018.03 (Jul 18 2019 - 10:05:17 -0300) SPL: Unsupported Boot Device! SPL: failed to boot from all boot devices Enable necessary configuration in defconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com> --- configs/mx6ul_14x14_evk_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+)