| Message ID | 20190625225008.58056-1-james.hilliard1@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/1] package/weston-imx: Split weston-imx off from weston | expand |
Hi James, Adding Garry to Cc. On Tue, Jun 25, 2019 at 04:50:08PM -0600, James Hilliard wrote: > This is in preparation for migration of weston to the meson build system. > Since weston-imx is based off of a much older version of weston it is > difficult to maintain as part of the weston package. It might be easier to bump weston-imx to rel_imx_4.19.35_1.0.0 which is based on upstream version 6.0.0. baruch > Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
On Tue, Jun 25, 2019, 9:58 PM Baruch Siach <baruch@tkos.co.il> wrote: > Hi James, > > Adding Garry to Cc. > > On Tue, Jun 25, 2019 at 04:50:08PM -0600, James Hilliard wrote: > > This is in preparation for migration of weston to the meson build system. > > Since weston-imx is based off of a much older version of weston it is > > difficult to maintain as part of the weston package. > > It might be easier to bump weston-imx to rel_imx_4.19.35_1.0.0 which is > based > on upstream version 6.0.0. > From what I could tell the imx features were only set up for autotools for that version as well. > > baruch > > > Signed-off-by: James Hilliard <james.hilliard1@gmail.com> > > -- > http://baruch.siach.name/blog/ ~. .~ Tk Open > Systems > =}------------------------------------------------ooO--U--Ooo------------{= > - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - >
Hi James, Baruch, On Tue, Jun 25, 2019 at 10:34:34PM -0600, James Hilliard wrote: > On Tue, Jun 25, 2019, 9:58 PM Baruch Siach <baruch@tkos.co.il> wrote: > > > Hi James, > > > > Adding Garry to Cc. > > > > On Tue, Jun 25, 2019 at 04:50:08PM -0600, James Hilliard wrote: > > > This is in preparation for migration of weston to the meson build system. > > > Since weston-imx is based off of a much older version of weston it is > > > difficult to maintain as part of the weston package. > > > > It might be easier to bump weston-imx to rel_imx_4.19.35_1.0.0 which is > > based > > on upstream version 6.0.0. > > > From what I could tell the imx features were only set up for autotools for > that version as well. Don't know much about meson to be honest but NXP patches indeed only change configure.ac and not meson_options.txt. If the switch to meson is happening now, yes I guess the NXP fork will have to be split. Also note that any update to the weston-imx version will imply using the NXP-forked version of wayland-protocols as well [1] :( Regards, Gary [1] https://source.codeaurora.org/external/imx/wayland-protocols-imx/log/?h=rel_imx_4.14.98_2.0.0_ga
On Wed, Jun 26, 2019 at 10:25 AM Gary Bisson <bisson.gary@gmail.com> wrote: > > Hi James, Baruch, > > On Tue, Jun 25, 2019 at 10:34:34PM -0600, James Hilliard wrote: > > On Tue, Jun 25, 2019, 9:58 PM Baruch Siach <baruch@tkos.co.il> wrote: > > > > > Hi James, > > > > > > Adding Garry to Cc. > > > > > > On Tue, Jun 25, 2019 at 04:50:08PM -0600, James Hilliard wrote: > > > > This is in preparation for migration of weston to the meson build system. > > > > Since weston-imx is based off of a much older version of weston it is > > > > difficult to maintain as part of the weston package. > > > > > > It might be easier to bump weston-imx to rel_imx_4.19.35_1.0.0 which is > > > based > > > on upstream version 6.0.0. > > > > > From what I could tell the imx features were only set up for autotools for > > that version as well. > > Don't know much about meson to be honest but NXP patches indeed only > change configure.ac and not meson_options.txt. > > If the switch to meson is happening now, yes I guess the NXP fork will > have to be split. > > Also note that any update to the weston-imx version will imply using the > NXP-forked version of wayland-protocols as well [1] :( It doesn't look like we've been using the wayland-protocols-imx fork at all. Shouldn't the upstream version for wayland-protocols work? > > Regards, > Gary > > [1] https://source.codeaurora.org/external/imx/wayland-protocols-imx/log/?h=rel_imx_4.14.98_2.0.0_ga
James, All, Sorry for the delay in replying to this one... On 2019-06-25 16:50 -0600, James Hilliard spake thusly: > This is in preparation for migration of weston to the meson build system. > Since weston-imx is based off of a much older version of weston it is > difficult to maintain as part of the weston package. I agree that we should split it into its own package. > Signed-off-by: James Hilliard <james.hilliard1@gmail.com> > --- [--SNIP--] > +if BR2_PACKAGE_WESTON_IMX > + > +# Helper to make sure at least one compositor is selected. > +config BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR > + bool > + > +config BR2_PACKAGE_WESTON_IMX_DRM > + bool "DRM compositor" Do all the backends really make sense for the imx fork? I.e. I would expect that the drm, rdp, etc... backends do not make sense (maybe just the fbdev one?) and that the oter backends would be provided only by the real weston, leaving the imx fork nly provide the backend for imx. Which implies that we should allow bioth westons to be installed side by side, and that the imx variant be installed as 'weston-imx', e.g. using the ./configure flag: --program-suffix=-imx Regards, Yann E. MORIN.
On Sun, Jul 14, 2019 at 12:34 PM Yann E. MORIN <yann.morin.1998@free.fr> wrote: > > James, All, > > Sorry for the delay in replying to this one... > > On 2019-06-25 16:50 -0600, James Hilliard spake thusly: > > This is in preparation for migration of weston to the meson build system. > > Since weston-imx is based off of a much older version of weston it is > > difficult to maintain as part of the weston package. > > I agree that we should split it into its own package. > > > Signed-off-by: James Hilliard <james.hilliard1@gmail.com> > > --- > [--SNIP--] > > +if BR2_PACKAGE_WESTON_IMX > > + > > +# Helper to make sure at least one compositor is selected. > > +config BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR > > + bool > > + > > +config BR2_PACKAGE_WESTON_IMX_DRM > > + bool "DRM compositor" > > Do all the backends really make sense for the imx fork? I'm not sure. > > I.e. I would expect that the drm, rdp, etc... backends do not make > sense (maybe just the fbdev one?) and that the oter backends would be > provided only by the real weston, leaving the imx fork nly provide the > backend for imx. > > Which implies that we should allow bioth westons to be installed side by > side, and that the imx variant be installed as 'weston-imx', e.g. using > the ./configure flag: Is there a use case for having both westons side by side? > > --program-suffix=-imx > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------'
James, All, On 2019-07-14 12:37 -0600, James Hilliard spake thusly: > On Sun, Jul 14, 2019 at 12:34 PM Yann E. MORIN <yann.morin.1998@free.fr> wrote: > > On 2019-06-25 16:50 -0600, James Hilliard spake thusly: > > > This is in preparation for migration of weston to the meson build system. > > > Since weston-imx is based off of a much older version of weston it is > > > difficult to maintain as part of the weston package. [--SNIP--] > > Which implies that we should allow bioth westons to be installed side by > > side, and that the imx variant be installed as 'weston-imx', e.g. using > > the ./configure flag: > Is there a use case for having both westons side by side? Well, yes: the RDB stuff for example does not seem to depend on the hardware at all, in fact, so it would be better if it were provided by the real weston, which is more up-to-date with RDP than by the imx fork, which supports an older version of RDP. And it has caused grief in the past that when we update weston, it uses newer FreeRDP APIs, or the other way around, when we update FreeRDP, it no longer exports APIs needed by older weston. So, I'd like we find a way for the imxc fork to be consrained to only the actual imx backend, and keep using the official weston for all the rest. Regards, Yann E. MORIN. > > --program-suffix=-imx > > > > Regards, > > Yann E. MORIN. > > > > -- > > .-----------------.--------------------.------------------.--------------------. > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > '------------------------------^-------^------------------^--------------------'
On Sun, Jul 14, 2019 at 12:53 PM Yann E. MORIN <yann.morin.1998@free.fr> wrote: > > James, All, > > On 2019-07-14 12:37 -0600, James Hilliard spake thusly: > > On Sun, Jul 14, 2019 at 12:34 PM Yann E. MORIN <yann.morin.1998@free.fr> wrote: > > > On 2019-06-25 16:50 -0600, James Hilliard spake thusly: > > > > This is in preparation for migration of weston to the meson build system. > > > > Since weston-imx is based off of a much older version of weston it is > > > > difficult to maintain as part of the weston package. > [--SNIP--] > > > Which implies that we should allow bioth westons to be installed side by > > > side, and that the imx variant be installed as 'weston-imx', e.g. using > > > the ./configure flag: > > Is there a use case for having both westons side by side? > > Well, yes: the RDB stuff for example does not seem to depend on the > hardware at all, in fact, so it would be better if it were provided by > the real weston, which is more up-to-date with RDP than by the imx fork, > which supports an older version of RDP. And it has caused grief in the > past that when we update weston, it uses newer FreeRDP APIs, or the > other way around, when we update FreeRDP, it no longer exports APIs > needed by older weston. Ah, I don't have any imx hardware so someone else would probably need to do that. > > So, I'd like we find a way for the imxc fork to be consrained to only > the actual imx backend, and keep using the official weston for all the > rest. I'm not sure how one would best go about that. > > Regards, > Yann E. MORIN. > > > > --program-suffix=-imx > > > > > > Regards, > > > Yann E. MORIN. > > > > > > -- > > > .-----------------.--------------------.------------------.--------------------. > > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > > '------------------------------^-------^------------------^--------------------' > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------'
diff --git a/package/Config.in b/package/Config.in index bc529e0b56..1181793cb8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -331,6 +331,7 @@ comment "QT libraries and helper libraries" endif source "package/tekui/Config.in" source "package/weston/Config.in" + source "package/weston-imx/Config.in" source "package/x11r7/Config.in" comment "X applications" diff --git a/package/weston-imx/Config.in b/package/weston-imx/Config.in new file mode 100644 index 0000000000..a82cb947a0 --- /dev/null +++ b/package/weston-imx/Config.in @@ -0,0 +1,108 @@ +comment "weston-imx needs udev and a toolchain w/ locale, threads, dynamic library, headers >= 3.0" + depends on BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL + depends on !BR2_PACKAGE_HAS_UDEV || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 || BR2_STATIC_LIBS || \ + !BR2_ENABLE_LOCALE + +config BR2_PACKAGE_WESTON_IMX + bool "weston-imx" + depends on BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL + depends on BR2_ENABLE_LOCALE # libinput + depends on BR2_PACKAGE_HAS_UDEV + depends on !BR2_STATIC_LIBS # wayland + depends on BR2_TOOLCHAIN_HAS_THREADS # wayland + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + select BR2_PACKAGE_WAYLAND + select BR2_PACKAGE_WAYLAND_PROTOCOLS + select BR2_PACKAGE_LIBXKBCOMMON + select BR2_PACKAGE_CAIRO + select BR2_PACKAGE_CAIRO_PNG + select BR2_PACKAGE_LIBPNG + select BR2_PACKAGE_JPEG + select BR2_PACKAGE_LIBINPUT + select BR2_PACKAGE_LIBDRM + # Runtime dependency + select BR2_PACKAGE_XKEYBOARD_CONFIG + # Make sure at least one compositor is selected. + select BR2_PACKAGE_WESTON_IMX_FBDEV if !BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR + help + Weston is the reference implementation of a Wayland + compositor, and a useful compositor in its own right. + Weston has various backends that lets it run on Linux kernel + modesetting and evdev input as well as under X11. + + http://wayland.freedesktop.org/ + +if BR2_PACKAGE_WESTON_IMX + +# Helper to make sure at least one compositor is selected. +config BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR + bool + +config BR2_PACKAGE_WESTON_IMX_DRM + bool "DRM compositor" + depends on BR2_PACKAGE_MESA3D_OPENGL_EGL + select BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR + +# Uses libgbm from mesa3d +comment "DRM compositor needs an OpenGL EGL backend provided by mesa3d" + depends on !BR2_PACKAGE_MESA3D_OPENGL_EGL + +config BR2_PACKAGE_WESTON_IMX_FBDEV + bool "fbdev compositor" + +# FreeRDP needs threads and !static, already the case for weston +config BR2_PACKAGE_WESTON_IMX_RDP + bool "RDP compositor" + depends on BR2_USE_MMU # freerdp, libglib2 + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_WCHAR # freerdp + depends on BR2_INSTALL_LIBSTDCPP # freerdp + select BR2_PACKAGE_FREERDP + select BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR + help + This enables the RDP backend, which allows accessing weston + through the network with any RDP-compliant client. + + Please note that one must pass those options to weston for RDP + to be functional: + --rdp-tls-cert=/path/to/server.crt + --rdp-tls-key=/path/to/server.key + + By default, Buildroot installs such files in + /etc/freerdp/server/ so you may want to change them in a + post-build script or a rootfs overlay. + +comment "RDP compositor needs a toolchain w/ wchar, C++" + depends on BR2_USE_MMU + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP + +config BR2_PACKAGE_WESTON_IMX_X11 + bool "X11 compositor" + depends on BR2_PACKAGE_XORG7 + select BR2_PACKAGE_LIBXCB + select BR2_PACKAGE_XLIB_LIBX11 + select BR2_PACKAGE_WESTON_IMX_HAS_COMPOSITOR + +comment "X11 compositor needs X.org enabled" + depends on !BR2_PACKAGE_XORG7 + +config BR2_PACKAGE_WESTON_IMX_XWAYLAND + bool "XWayland support" + depends on BR2_PACKAGE_XORG7 + depends on BR2_PACKAGE_LIBEPOXY + select BR2_PACKAGE_CAIRO + select BR2_PACKAGE_LIBXCB + select BR2_PACKAGE_XLIB_LIBX11 + select BR2_PACKAGE_XLIB_LIBXCURSOR + +comment "XWayland support needs libepoxy and X.org enabled" + depends on !BR2_PACKAGE_XORG7 || !BR2_PACKAGE_LIBEPOXY + +config BR2_PACKAGE_WESTON_IMX_DEMO_CLIENTS + bool "demo clients" + help + This enables the installation of Weston's demo clients. + +endif diff --git a/package/weston-imx/weston-imx.hash b/package/weston-imx/weston-imx.hash new file mode 100644 index 0000000000..759a9b6554 --- /dev/null +++ b/package/weston-imx/weston-imx.hash @@ -0,0 +1,2 @@ +# locally computed +sha256 f39f7a24a01b023aa204ad47977a6476c17a307769f29d408621a05b5cbbcfc7 weston-imx-rel_imx_4.9.51_8mq_ga.tar.gz diff --git a/package/weston-imx/weston-imx.mk b/package/weston-imx/weston-imx.mk new file mode 100644 index 0000000000..9dd2088502 --- /dev/null +++ b/package/weston-imx/weston-imx.mk @@ -0,0 +1,144 @@ +################################################################################ +# +# weston +# +################################################################################ + +WESTON_IMX_VERSION = rel_imx_4.9.51_8mq_ga +WESTON_IMX_SITE = https://source.codeaurora.org/external/imx/weston-imx +WESTON_IMX_SITE_METHOD = git +WESTON_IMX_AUTORECONF = YES +WESTON_IMX_LICENSE = MIT +WESTON_IMX_LICENSE_FILES = COPYING + +WESTON_IMX_DEPENDENCIES = host-pkgconf wayland wayland-protocols \ + libxkbcommon pixman libpng jpeg udev cairo libinput libdrm \ + $(if $(BR2_PACKAGE_WEBP),webp) + +WESTON_IMX_CONF_OPTS = \ + --with-dtddir=$(STAGING_DIR)/usr/share/wayland \ + --disable-headless-compositor \ + --disable-colord \ + --disable-devdocs \ + --disable-setuid-install + +WESTON_IMX_MAKE_OPTS = \ + WAYLAND_PROTOCOLS_DATADIR=$(STAGING_DIR)/usr/share/wayland-protocols + +# Uses VIDIOC_EXPBUF, only available from 3.8+ +ifeq ($(BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8),) +WESTON_IMX_CONF_OPTS += --disable-simple-dmabuf-v4l-client +endif + +ifeq ($(BR2_PACKAGE_DBUS),y) +WESTON_IMX_CONF_OPTS += --enable-dbus +WESTON_IMX_DEPENDENCIES += dbus +else +WESTON_IMX_CONF_OPTS += --disable-dbus +endif + +# weston-launch must be u+s root in order to work properly +ifeq ($(BR2_PACKAGE_LINUX_PAM),y) +define WESTON_IMX_PERMISSIONS + /usr/bin/weston-launch f 4755 0 0 - - - - - +endef +define WESTON_IMX_USERS + - - weston-launch -1 - - - - Weston launcher group +endef +WESTON_IMX_CONF_OPTS += --enable-weston-launch +WESTON_IMX_DEPENDENCIES += linux-pam +else +WESTON_IMX_CONF_OPTS += --disable-weston-launch +endif + +ifeq ($(BR2_PACKAGE_IMX_GPU_G2D),y) +WESTON_IMX_DEPENDENCIES += imx-gpu-g2d +# --enable-imxg2d actually disables it, so no CONF_OPTS +else +WESTON_IMX_CONF_OPTS += --disable-imxg2d +endif + +ifeq ($(BR2_PACKAGE_HAS_LIBEGL_WAYLAND)$(BR2_PACKAGE_HAS_LIBGLES),yy) +WESTON_IMX_CONF_OPTS += --enable-egl +WESTON_IMX_DEPENDENCIES += libegl libgles +else +WESTON_IMX_CONF_OPTS += \ + --disable-egl \ + --disable-simple-dmabuf-drm-client \ + --disable-simple-egl-clients +endif + +ifeq ($(BR2_PACKAGE_WESTON_IMX_RDP),y) +WESTON_IMX_DEPENDENCIES += freerdp +WESTON_IMX_CONF_OPTS += --enable-rdp-compositor +else +WESTON_IMX_CONF_OPTS += --disable-rdp-compositor +endif + +ifeq ($(BR2_PACKAGE_WESTON_IMX_FBDEV),y) +WESTON_IMX_CONF_OPTS += \ + --enable-fbdev-compositor \ + WESTON_IMX_NATIVE_BACKEND=fbdev-backend.so +else +WESTON_IMX_CONF_OPTS += --disable-fbdev-compositor +endif + +ifeq ($(BR2_PACKAGE_WESTON_IMX_DRM),y) +WESTON_IMX_CONF_OPTS += \ + --enable-drm-compositor \ + WESTON_IMX_NATIVE_BACKEND=drm-backend.so +else +WESTON_IMX_CONF_OPTS += --disable-drm-compositor +endif + +ifeq ($(BR2_PACKAGE_WESTON_IMX_X11),y) +WESTON_IMX_CONF_OPTS += \ + --enable-x11-compositor \ + WESTON_IMX_NATIVE_BACKEND=x11-backend.so +WESTON_IMX_DEPENDENCIES += libxcb xlib_libX11 +else +WESTON_IMX_CONF_OPTS += --disable-x11-compositor +endif + +ifeq ($(BR2_PACKAGE_WESTON_IMX_XWAYLAND),y) +WESTON_IMX_CONF_OPTS += --enable-xwayland +WESTON_IMX_DEPENDENCIES += cairo libepoxy libxcb xlib_libX11 xlib_libXcursor +else +WESTON_IMX_CONF_OPTS += --disable-xwayland +endif + +ifeq ($(BR2_PACKAGE_LIBVA),y) +WESTON_IMX_CONF_OPTS += --enable-vaapi-recorder +WESTON_IMX_DEPENDENCIES += libva +else +WESTON_IMX_CONF_OPTS += --disable-vaapi-recorder +endif + +ifeq ($(BR2_PACKAGE_LCMS2),y) +WESTON_IMX_CONF_OPTS += --enable-lcms +WESTON_IMX_DEPENDENCIES += lcms2 +else +WESTON_IMX_CONF_OPTS += --disable-lcms +endif + +ifeq ($(BR2_PACKAGE_SYSTEMD),y) +WESTON_IMX_CONF_OPTS += --enable-systemd-login --enable-systemd-notify +WESTON_IMX_DEPENDENCIES += systemd +else +WESTON_IMX_CONF_OPTS += --disable-systemd-login --disable-systemd-notify +endif + +ifeq ($(BR2_PACKAGE_LIBXML2),y) +WESTON_IMX_CONF_OPTS += --enable-junit-xml +WESTON_IMX_DEPENDENCIES += libxml2 +else +WESTON_IMX_CONF_OPTS += --disable-junit-xml +endif + +ifeq ($(BR2_PACKAGE_WESTON_IMX_DEMO_CLIENTS),y) +WESTON_IMX_CONF_OPTS += --enable-demo-clients-install +else +WESTON_IMX_CONF_OPTS += --disable-demo-clients-install +endif + +$(eval $(autotools-package)) diff --git a/package/weston/Config.in b/package/weston/Config.in index f874b0cc6a..5a5e288540 100644 --- a/package/weston/Config.in +++ b/package/weston/Config.in @@ -1,10 +1,12 @@ comment "weston needs udev and a toolchain w/ locale, threads, dynamic library, headers >= 3.0" + depends on !BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL depends on !BR2_PACKAGE_HAS_UDEV || !BR2_TOOLCHAIN_HAS_THREADS || \ !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 || BR2_STATIC_LIBS || \ !BR2_ENABLE_LOCALE config BR2_PACKAGE_WESTON bool "weston" + depends on !BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL depends on BR2_ENABLE_LOCALE # libinput depends on BR2_PACKAGE_HAS_UDEV depends on !BR2_STATIC_LIBS # wayland diff --git a/package/weston/weston.hash b/package/weston/weston.hash index a2dddf7a5b..c9b2d4b1ce 100644 --- a/package/weston/weston.hash +++ b/package/weston/weston.hash @@ -3,5 +3,3 @@ md5 e7b10710ef1eac82258f97bfd41fe534 weston-6.0.1.tar.xz sha1 3b39e454b3dc8dc32598790cfcc65728b448378b weston-6.0.1.tar.xz sha256 bf2f6d5aae2e11cabb6bd69a76bcf9edb084f8c3e14ca769bea7234a513155b4 weston-6.0.1.tar.xz sha512 3da04ff9b884480ce0824950347185e55584e3938021fe62014423d3d51577eafdda8de650a5de6eb37a842130c9cb14c7a952a560f6be93ff973164363af3d9 weston-6.0.1.tar.xz -# locally computed -sha256 0f0de7b7b1f65870139c95dde7abc19ed305631ae7c5d37c386db40cde108632 weston-rel_imx_4.9.51_8mq_ga.tar.gz diff --git a/package/weston/weston.mk b/package/weston/weston.mk index ee3d3be87e..154ae38b83 100644 --- a/package/weston/weston.mk +++ b/package/weston/weston.mk @@ -4,16 +4,9 @@ # ################################################################################ -ifeq ($(BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL),y) -WESTON_VERSION = rel_imx_4.9.51_8mq_ga -WESTON_SITE = https://source.codeaurora.org/external/imx/weston-imx -WESTON_SITE_METHOD = git -WESTON_AUTORECONF = YES -else WESTON_VERSION = 6.0.1 WESTON_SITE = http://wayland.freedesktop.org/releases WESTON_SOURCE = weston-$(WESTON_VERSION).tar.xz -endif WESTON_LICENSE = MIT WESTON_LICENSE_FILES = COPYING @@ -58,15 +51,6 @@ else WESTON_CONF_OPTS += --disable-weston-launch endif -ifeq ($(BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL),y) -ifeq ($(BR2_PACKAGE_IMX_GPU_G2D),y) -WESTON_DEPENDENCIES += imx-gpu-g2d -# --enable-imxg2d actually disables it, so no CONF_OPTS -else -WESTON_CONF_OPTS += --disable-imxg2d -endif -endif - ifeq ($(BR2_PACKAGE_HAS_LIBEGL_WAYLAND)$(BR2_PACKAGE_HAS_LIBGLES),yy) WESTON_CONF_OPTS += --enable-egl WESTON_DEPENDENCIES += libegl libgles
This is in preparation for migration of weston to the meson build system. Since weston-imx is based off of a much older version of weston it is difficult to maintain as part of the weston package. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> --- package/Config.in | 1 + package/weston-imx/Config.in | 108 ++++++++++++++++++++++ package/weston-imx/weston-imx.hash | 2 + package/weston-imx/weston-imx.mk | 144 +++++++++++++++++++++++++++++ package/weston/Config.in | 2 + package/weston/weston.hash | 2 - package/weston/weston.mk | 16 ---- 7 files changed, 257 insertions(+), 18 deletions(-) create mode 100644 package/weston-imx/Config.in create mode 100644 package/weston-imx/weston-imx.hash create mode 100644 package/weston-imx/weston-imx.mk