diff mbox series

[4/4] devicetree: Add led-backlight binding

Message ID 20190701151423.30768-5-jjhiblot@ti.com
State Superseded, archived
Headers show
Series None | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Jean-Jacques Hiblot July 1, 2019, 3:14 p.m. UTC 
From: Tomi Valkeinen <tomi.valkeinen@ti.com>

Add DT binding for led-backlight.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: devicetree@vger.kernel.org
---
 .../video/backlight/led-backlight.txt         | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/backlight/led-backlight.txt

Comments

Daniel Thompson July 2, 2019, 9:58 a.m. UTC | #1 
On Mon, Jul 01, 2019 at 05:14:23PM +0200, Jean-Jacques Hiblot wrote:
> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> Add DT binding for led-backlight.

I think the patchset is in the wrong order; the DT bindings
documentation should appear *before* the binding is
implemented (amoung other things this prevent transient checkpatch
warnings as the patchset is applied).


> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Cc: devicetree@vger.kernel.org
> ---
>  .../video/backlight/led-backlight.txt         | 39 +++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/backlight/led-backlight.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/backlight/led-backlight.txt b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
> new file mode 100644
> index 000000000000..216cd52d624a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
> @@ -0,0 +1,39 @@
> +led-backlight bindings
> +
> +The node of the backlight driver IS the node of the LED.
> +
> +Required properties:
> +  - compatible: "led-backlight"
> +  - brightness-levels: Array of distinct LED brightness levels. These
> +      are in the range from 0 to 255, passed to the LED class driver.
> +  - default-brightness-level: the default brightness level (index into the
> +      array defined by the "brightness-levels" property)

I think brightness-levels and default-brightness-level could be
optional properties since a default 1:1 mapping seems reasonable given
how constrained the LED brightness values are.


Daniel.


> +
> +Optional properties:
> +  - power-supply: regulator for supply voltage
> +  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
> +                  and disables the backlight (see GPIO binding[0])
> +
> +[0]: Documentation/devicetree/bindings/gpio/gpio.txt
> +
> +Example:
> +
> +led_ctrl {
> +	red_led@1 {
> +	        label = "red";
> +		reg = <1>;
> +	}
> +
> +	backlight_led@2 {
> +		function = LED_FUNCTION_BACKLIGHT;
> +		reg = <2>;
> +
> +		compatible = "led-backlight";
> +
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +
> +		power-supply = <&vdd_bl_reg>;
> +		enable-gpios = <&gpio 58 0>;
> +	};
> +};
> -- 
> 2.17.1
>
Jean-Jacques Hiblot July 2, 2019, 11:11 a.m. UTC | #2 
Daniel,

On 02/07/2019 11:58, Daniel Thompson wrote:
> On Mon, Jul 01, 2019 at 05:14:23PM +0200, Jean-Jacques Hiblot wrote:
>> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
>>
>> Add DT binding for led-backlight.
> I think the patchset is in the wrong order; the DT bindings
> documentation should appear *before* the binding is
> implemented (amoung other things this prevent transient checkpatch
> warnings as the patchset is applied).
>
ok
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
>> Cc: devicetree@vger.kernel.org
>> ---
>>   .../video/backlight/led-backlight.txt         | 39 +++++++++++++++++++
>>   1 file changed, 39 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/video/backlight/led-backlight.txt
>>
>> diff --git a/Documentation/devicetree/bindings/video/backlight/led-backlight.txt b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
>> new file mode 100644
>> index 000000000000..216cd52d624a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
>> @@ -0,0 +1,39 @@
>> +led-backlight bindings
>> +
>> +The node of the backlight driver IS the node of the LED.
>> +
>> +Required properties:
>> +  - compatible: "led-backlight"
>> +  - brightness-levels: Array of distinct LED brightness levels. These
>> +      are in the range from 0 to 255, passed to the LED class driver.
>> +  - default-brightness-level: the default brightness level (index into the
>> +      array defined by the "brightness-levels" property)
> I think brightness-levels and default-brightness-level could be
> optional properties since a default 1:1 mapping seems reasonable given
> how constrained the LED brightness values are.

That is probably a good idea. Expect it in v2

Thanks,

JJ

>
>
> Daniel.
>
>
>> +
>> +Optional properties:
>> +  - power-supply: regulator for supply voltage
>> +  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
>> +                  and disables the backlight (see GPIO binding[0])
>> +
>> +[0]: Documentation/devicetree/bindings/gpio/gpio.txt
>> +
>> +Example:
>> +
>> +led_ctrl {
>> +	red_led@1 {
>> +	        label = "red";
>> +		reg = <1>;
>> +	}
>> +
>> +	backlight_led@2 {
>> +		function = LED_FUNCTION_BACKLIGHT;
>> +		reg = <2>;
>> +
>> +		compatible = "led-backlight";
>> +
>> +		brightness-levels = <0 4 8 16 32 64 128 255>;
>> +		default-brightness-level = <6>;
>> +
>> +		power-supply = <&vdd_bl_reg>;
>> +		enable-gpios = <&gpio 58 0>;
>> +	};
>> +};
>> -- 
>> 2.17.1
>>
Pavel Machek July 5, 2019, 10:11 a.m. UTC | #3 
Hi!

> Add DT binding for led-backlight.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Cc: devicetree@vger.kernel.org
> ---

> +Required properties:
> +  - compatible: "led-backlight"
> +  - brightness-levels: Array of distinct LED brightness levels. These
> +      are in the range from 0 to 255, passed to the LED class driver.

These days, we support more (or less) than 256 brightness levels for LED.
									Pavel
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/video/backlight/led-backlight.txt b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
new file mode 100644
index 000000000000..216cd52d624a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
@@ -0,0 +1,39 @@ 
+led-backlight bindings
+
+The node of the backlight driver IS the node of the LED.
+
+Required properties:
+  - compatible: "led-backlight"
+  - brightness-levels: Array of distinct LED brightness levels. These
+      are in the range from 0 to 255, passed to the LED class driver.
+  - default-brightness-level: the default brightness level (index into the
+      array defined by the "brightness-levels" property)
+
+Optional properties:
+  - power-supply: regulator for supply voltage
+  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
+                  and disables the backlight (see GPIO binding[0])
+
+[0]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+led_ctrl {
+	red_led@1 {
+	        label = "red";
+		reg = <1>;
+	}
+
+	backlight_led@2 {
+		function = LED_FUNCTION_BACKLIGHT;
+		reg = <2>;
+
+		compatible = "led-backlight";
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&vdd_bl_reg>;
+		enable-gpios = <&gpio 58 0>;
+	};
+};