diff mbox series

[U-Boot,PATCHv3,01/10] arm: Remove zipitz2 board

Message ID 1559163696-8722-1-git-send-email-trini@konsulko.com
State Accepted
Commit 9a4b90015a6a03c14071802f8bf49a17e0be6b16
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series [U-Boot,PATCHv3,01/10] arm: Remove zipitz2 board | expand

Commit Message

Tom Rini May 29, 2019, 9:01 p.m. UTC 
Per discussion on the list, drop this board again.

Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/Kconfig          |   5 --
 board/zipitz2/Kconfig     |   9 --
 board/zipitz2/MAINTAINERS |   6 --
 board/zipitz2/Makefile    |   8 --
 board/zipitz2/zipitz2.c   | 219 ----------------------------------------------
 configs/zipitz2_defconfig |  34 -------
 include/configs/zipitz2.h | 186 ---------------------------------------
 7 files changed, 467 deletions(-)
 delete mode 100644 board/zipitz2/Kconfig
 delete mode 100644 board/zipitz2/MAINTAINERS
 delete mode 100644 board/zipitz2/Makefile
 delete mode 100644 board/zipitz2/zipitz2.c
 delete mode 100644 configs/zipitz2_defconfig
 delete mode 100644 include/configs/zipitz2.h

Comments

Vasily Khoruzhick May 29, 2019, 10:27 p.m. UTC | #1 
On Wed, May 29, 2019 at 2:01 PM Tom Rini <trini@konsulko.com> wrote:
>
> Per discussion on the list, drop this board again.
>
> Cc: Vasily Khoruzhick <anarsoul@gmail.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>

Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>

Thanks for submitting this patch!

> ---
>  arch/arm/Kconfig          |   5 --
>  board/zipitz2/Kconfig     |   9 --
>  board/zipitz2/MAINTAINERS |   6 --
>  board/zipitz2/Makefile    |   8 --
>  board/zipitz2/zipitz2.c   | 219 ----------------------------------------------
>  configs/zipitz2_defconfig |  34 -------
>  include/configs/zipitz2.h | 186 ---------------------------------------
>  7 files changed, 467 deletions(-)
>  delete mode 100644 board/zipitz2/Kconfig
>  delete mode 100644 board/zipitz2/MAINTAINERS
>  delete mode 100644 board/zipitz2/Makefile
>  delete mode 100644 board/zipitz2/zipitz2.c
>  delete mode 100644 configs/zipitz2_defconfig
>  delete mode 100644 include/configs/zipitz2.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 01ff57cf1bec..0e82cf1583f7 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1410,10 +1410,6 @@ config TARGET_H2200
>         bool "Support h2200"
>         select CPU_PXA
>
> -config TARGET_ZIPITZ2
> -       bool "Support zipitz2"
> -       select CPU_PXA
> -
>  config TARGET_COLIBRI_PXA270
>         bool "Support colibri_pxa270"
>         select CPU_PXA
> @@ -1727,7 +1723,6 @@ source "board/woodburn/Kconfig"
>  source "board/xilinx/Kconfig"
>  source "board/xilinx/zynq/Kconfig"
>  source "board/xilinx/zynqmp/Kconfig"
> -source "board/zipitz2/Kconfig"
>
>  source "arch/arm/Kconfig.debug"
>
> diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig
> deleted file mode 100644
> index c6635040a37f..000000000000
> --- a/board/zipitz2/Kconfig
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -if TARGET_ZIPITZ2
> -
> -config SYS_BOARD
> -       default "zipitz2"
> -
> -config SYS_CONFIG_NAME
> -       default "zipitz2"
> -
> -endif
> diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS
> deleted file mode 100644
> index e027cd361aae..000000000000
> --- a/board/zipitz2/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -ZIPITZ2 BOARD
> -M:     Vasily Khoruzhick <anarsoul@gmail.com>
> -S:     Maintained
> -F:     board/zipitz2/
> -F:     include/configs/zipitz2.h
> -F:     configs/zipitz2_defconfig
> diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile
> deleted file mode 100644
> index 2bbe4364e8f7..000000000000
> --- a/board/zipitz2/Makefile
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# Copyright (C) 2009
> -# Marek Vasut <marek.vasut@gmail.com>
> -#
> -# Heavily based on pxa255_idp platform
> -
> -obj-y  := zipitz2.o
> diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
> deleted file mode 100644
> index 9208c882c272..000000000000
> --- a/board/zipitz2/zipitz2.c
> +++ /dev/null
> @@ -1,219 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright (C) 2009
> - * Marek Vasut <marek.vasut@gmail.com>
> - *
> - * Heavily based on pxa255_idp platform
> - */
> -
> -#include <common.h>
> -#include <command.h>
> -#include <serial.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/pxa.h>
> -#include <asm/arch/regs-mmc.h>
> -#include <spi.h>
> -#include <asm/io.h>
> -#include <usb.h>
> -#include <asm/mach-types.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -#ifdef CONFIG_CMD_SPI
> -void lcd_start(void);
> -#else
> -inline void lcd_start(void) {};
> -#endif
> -
> -/*
> - * Miscelaneous platform dependent initialisations
> - */
> -int board_init(void)
> -{
> -       /* arch number of Z2 */
> -       gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
> -
> -       /* adress of boot parameters */
> -       gd->bd->bi_boot_params = 0xa0000100;
> -
> -       /* Enable LCD */
> -       lcd_start();
> -
> -       return 0;
> -}
> -
> -int dram_init(void)
> -{
> -       pxa2xx_dram_init();
> -       gd->ram_size = PHYS_SDRAM_1_SIZE;
> -       return 0;
> -}
> -
> -#ifdef CONFIG_CMD_USB
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> -       /* enable port 2 */
> -       writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
> -               UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
> -
> -       return 0;
> -}
> -
> -int board_usb_cleanup(int index, enum usb_init_type init)
> -{
> -       return 0;
> -}
> -
> -void usb_board_stop(void)
> -{
> -}
> -#endif
> -
> -int dram_init_banksize(void)
> -{
> -       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> -       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> -
> -       return 0;
> -}
> -
> -#ifdef CONFIG_CMD_MMC
> -int board_mmc_init(bd_t *bis)
> -{
> -       pxa_mmc_register(0);
> -       return 0;
> -}
> -#endif
> -
> -#ifdef CONFIG_CMD_SPI
> -
> -struct {
> -       unsigned char   reg;
> -       unsigned short  data;
> -       unsigned char   mdelay;
> -} lcd_data[] = {
> -       { 0x07, 0x0000, 0 },
> -       { 0x13, 0x0000, 10 },
> -       { 0x11, 0x3004, 0 },
> -       { 0x14, 0x200F, 0 },
> -       { 0x10, 0x1a20, 0 },
> -       { 0x13, 0x0040, 50 },
> -       { 0x13, 0x0060, 0 },
> -       { 0x13, 0x0070, 200 },
> -       { 0x01, 0x0127, 0 },
> -       { 0x02, 0x0700, 0 },
> -       { 0x03, 0x1030, 0 },
> -       { 0x08, 0x0208, 0 },
> -       { 0x0B, 0x0620, 0 },
> -       { 0x0C, 0x0110, 0 },
> -       { 0x30, 0x0120, 0 },
> -       { 0x31, 0x0127, 0 },
> -       { 0x32, 0x0000, 0 },
> -       { 0x33, 0x0503, 0 },
> -       { 0x34, 0x0727, 0 },
> -       { 0x35, 0x0124, 0 },
> -       { 0x36, 0x0706, 0 },
> -       { 0x37, 0x0701, 0 },
> -       { 0x38, 0x0F00, 0 },
> -       { 0x39, 0x0F00, 0 },
> -       { 0x40, 0x0000, 0 },
> -       { 0x41, 0x0000, 0 },
> -       { 0x42, 0x013f, 0 },
> -       { 0x43, 0x0000, 0 },
> -       { 0x44, 0x013f, 0 },
> -       { 0x45, 0x0000, 0 },
> -       { 0x46, 0xef00, 0 },
> -       { 0x47, 0x013f, 0 },
> -       { 0x48, 0x0000, 0 },
> -       { 0x07, 0x0015, 30 },
> -       { 0x07, 0x0017, 0 },
> -       { 0x20, 0x0000, 0 },
> -       { 0x21, 0x0000, 0 },
> -       { 0x22, 0x0000, 0 },
> -};
> -
> -void zipitz2_spi_sda(int set)
> -{
> -       /* GPIO 13 */
> -       if (set)
> -               writel((1 << 13), GPSR0);
> -       else
> -               writel((1 << 13), GPCR0);
> -}
> -
> -void zipitz2_spi_scl(int set)
> -{
> -       /* GPIO 22 */
> -       if (set)
> -               writel((1 << 22), GPCR0);
> -       else
> -               writel((1 << 22), GPSR0);
> -}
> -
> -unsigned char zipitz2_spi_read(void)
> -{
> -       /* GPIO 40 */
> -       return !!(readl(GPLR1) & (1 << 8));
> -}
> -
> -int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> -{
> -       /* Always valid */
> -       return 1;
> -}
> -
> -void spi_cs_activate(struct spi_slave *slave)
> -{
> -       /* GPIO 88 low */
> -       writel((1 << 24), GPCR2);
> -}
> -
> -void spi_cs_deactivate(struct spi_slave *slave)
> -{
> -       /* GPIO 88 high */
> -       writel((1 << 24), GPSR2);
> -}
> -
> -void lcd_start(void)
> -{
> -       int i;
> -       unsigned char reg[3] = { 0x74, 0x00, 0 };
> -       unsigned char data[3] = { 0x76, 0, 0 };
> -       unsigned char dummy[3] = { 0, 0, 0 };
> -
> -       /* PWM2 AF */
> -       writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
> -       /* Enable clock to all PWM */
> -       writel(readl(CKEN) | 0x3, CKEN);
> -       /* Configure PWM2 */
> -       writel(0x4f, PWM_CTRL2);
> -       writel(0x2ff, PWM_PWDUTY2);
> -       writel(792, PWM_PERVAL2);
> -
> -       /* Toggle the reset pin to reset the LCD */
> -       writel((1 << 19), GPSR0);
> -       udelay(100000);
> -       writel((1 << 19), GPCR0);
> -       udelay(20000);
> -       writel((1 << 19), GPSR0);
> -       udelay(20000);
> -
> -       /* Program the LCD init sequence */
> -       for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
> -               reg[0] = 0x74;
> -               reg[1] = 0x0;
> -               reg[2] = lcd_data[i].reg;
> -               spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
> -
> -               data[0] = 0x76;
> -               data[1] = lcd_data[i].data >> 8;
> -               data[2] = lcd_data[i].data & 0xff;
> -               spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
> -
> -               if (lcd_data[i].mdelay)
> -                       udelay(lcd_data[i].mdelay * 1000);
> -       }
> -
> -       writel((1 << 11), GPSR0);
> -}
> -#endif
> diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig
> deleted file mode 100644
> index 509adcffd9c2..000000000000
> --- a/configs/zipitz2_defconfig
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_TARGET_ZIPITZ2=y
> -CONFIG_SYS_TEXT_BASE=0x0
> -CONFIG_NR_DRAM_BANKS=1
> -CONFIG_USE_BOOTARGS=y
> -CONFIG_BOOTARGS="console=tty0 console=ttyS2,115200 fbcon=rotate:3"
> -# CONFIG_CONSOLE_MUX is not set
> -# CONFIG_DISPLAY_BOARDINFO is not set
> -CONFIG_HUSH_PARSER=y
> -# CONFIG_CMDLINE_EDITING is not set
> -# CONFIG_AUTO_COMPLETE is not set
> -CONFIG_SYS_PROMPT="$ "
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_CACHE=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_ENV_IS_IN_FLASH=y
> -# CONFIG_NET is not set
> -CONFIG_MTD_NOR_FLASH=y
> -CONFIG_FLASH_CFI_DRIVER=y
> -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
> -CONFIG_SYS_FLASH_PROTECTION=y
> -CONFIG_SYS_FLASH_CFI=y
> -CONFIG_CONS_INDEX=2
> -CONFIG_PXA_SERIAL=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_LCD=y
> -CONFIG_LZMA=y
> -CONFIG_OF_LIBFDT=y
> -# CONFIG_EFI_LOADER is not set
> diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
> deleted file mode 100644
> index 24fea68a11f0..000000000000
> --- a/include/configs/zipitz2.h
> +++ /dev/null
> @@ -1,186 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Aeronix Zipit Z2 configuration file
> - *
> - * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Board Configuration Options
> - */
> -#define        CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
> -
> -#undef CONFIG_SKIP_LOWLEVEL_INIT
> -#define        CONFIG_PREBOOT
> -
> -/*
> - * Environment settings
> - */
> -#define        CONFIG_ENV_OVERWRITE
> -#define CONFIG_ENV_ADDR                        0x40000
> -#define CONFIG_ENV_SIZE                        0x10000
> -
> -#define        CONFIG_SYS_MALLOC_LEN           (128*1024)
> -#define        CONFIG_ARCH_CPU_INIT
> -
> -#define        CONFIG_BOOTCOMMAND                                              \
> -       "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
> -       "then "                                                         \
> -               "source 0xa0000000; "                                   \
> -       "else "                                                         \
> -               "bootm 0x50000; "                                       \
> -       "fi; "
> -#define        CONFIG_TIMESTAMP
> -#define        CONFIG_CMDLINE_TAG
> -#define        CONFIG_SETUP_MEMORY_TAGS
> -
> -/*
> - * Serial Console Configuration
> - * STUART - the lower serial port on Colibri board
> - */
> -#define        CONFIG_STUART                   1
> -
> -/*
> - * Bootloader Components Configuration
> - */
> -
> -/*
> - * MMC Card Configuration
> - */
> -#ifdef CONFIG_CMD_MMC
> -#define        CONFIG_PXA_MMC_GENERIC
> -#define        CONFIG_SYS_MMC_BASE             0xF0000000
> -#endif
> -
> -/*
> - * SPI and LCD
> - */
> -#ifdef CONFIG_CMD_SPI
> -#define        CONFIG_SOFT_SPI
> -#define        CONFIG_LCD_ROTATION
> -#define        CONFIG_PXA_LCD
> -#define        CONFIG_LMS283GF05
> -
> -#define        SPI_DELAY       udelay(10)
> -#define        SPI_SDA(val)    zipitz2_spi_sda(val)
> -#define        SPI_SCL(val)    zipitz2_spi_scl(val)
> -#define        SPI_READ        zipitz2_spi_read()
> -#ifndef        __ASSEMBLY__
> -void zipitz2_spi_sda(int);
> -void zipitz2_spi_scl(int);
> -unsigned char zipitz2_spi_read(void);
> -#endif
> -#endif
> -
> -#define        CONFIG_SYS_DEVICE_NULLDEV       1
> -
> -/*
> - * Clock Configuration
> - */
> -#define CONFIG_SYS_CPUSPEED            0x190           /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
> -
> -/*
> - * SRAM Map
> - */
> -#define        PHYS_SRAM                       0x5c000000      /* SRAM Bank #1 */
> -#define        PHYS_SRAM_SIZE                  0x00040000      /* 256k */
> -
> -/*
> - * DRAM Map
> - */
> -#define        PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
> -#define        PHYS_SDRAM_1_SIZE               0x02000000      /* 32 MB */
> -
> -#define        CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
> -#define        CONFIG_SYS_DRAM_SIZE            0x02000000      /* 32 MB DRAM */
> -
> -#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on */
> -#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM */
> -
> -#define        CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_DRAM_BASE
> -
> -#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
> -#define        CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
> -
> -/*
> - * NOR FLASH
> - */
> -#define PHYS_FLASH_1                   0x00000000      /* Flash Bank #1 */
> -#define PHYS_FLASH_SIZE                        0x00800000      /* 8 MB */
> -#define PHYS_FLASH_SECT_SIZE           0x00010000      /* 64 KB sectors */
> -#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
> -
> -#define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
> -
> -#define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
> -#define CONFIG_SYS_MONITOR_LEN         PHYS_FLASH_SECT_SIZE
> -
> -#define CONFIG_SYS_MAX_FLASH_BANKS     1
> -#define CONFIG_SYS_MAX_FLASH_SECT      256
> -
> -#define CONFIG_SYS_FLASH_ERASE_TOUT    240000
> -#define CONFIG_SYS_FLASH_WRITE_TOUT    240000
> -#define CONFIG_SYS_FLASH_LOCK_TOUT     240000
> -#define CONFIG_SYS_FLASH_UNLOCK_TOUT   240000
> -
> -/*
> - * GPIO settings
> - */
> -#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
> -#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
> -#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
> -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
> -#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
> -#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
> -#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
> -#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
> -#define CONFIG_SYS_GPCR0_VAL   0x00000000
> -#define CONFIG_SYS_GPCR1_VAL   0x00000020
> -#define CONFIG_SYS_GPCR2_VAL   0x00000000
> -#define CONFIG_SYS_GPCR3_VAL   0x00000000
> -#define CONFIG_SYS_GPDR0_VAL   0xdafcee00
> -#define CONFIG_SYS_GPDR1_VAL   0xffa3aaab
> -#define CONFIG_SYS_GPDR2_VAL   0x8fe9ffff
> -#define CONFIG_SYS_GPDR3_VAL   0x001b1f8a
> -#define CONFIG_SYS_GPSR0_VAL   0x06080400
> -#define CONFIG_SYS_GPSR1_VAL   0x007f0000
> -#define CONFIG_SYS_GPSR2_VAL   0x032a0000
> -#define CONFIG_SYS_GPSR3_VAL   0x00000180
> -
> -#define CONFIG_SYS_PSSR_VAL    0x30
> -
> -/*
> - * Clock settings
> - */
> -#define CONFIG_SYS_CKEN                0x00511220
> -#define CONFIG_SYS_CCCR                0x00000190
> -
> -/*
> - * Memory settings
> - */
> -#define CONFIG_SYS_MSC0_VAL    0x2ffc38f8
> -#define CONFIG_SYS_MSC1_VAL    0x0000ccd1
> -#define CONFIG_SYS_MSC2_VAL    0x0000b884
> -#define CONFIG_SYS_MDCNFG_VAL  0x08000ba9
> -#define CONFIG_SYS_MDREFR_VAL  0x2011a01e
> -#define CONFIG_SYS_MDMRS_VAL   0x00000000
> -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
> -#define CONFIG_SYS_SXCNFG_VAL  0x40044004
> -
> -/*
> - * PCMCIA and CF Interfaces
> - */
> -#define CONFIG_SYS_MECR_VAL    0x00000001
> -#define CONFIG_SYS_MCMEM0_VAL  0x00014307
> -#define CONFIG_SYS_MCMEM1_VAL  0x00014307
> -#define CONFIG_SYS_MCATT0_VAL  0x0001c787
> -#define CONFIG_SYS_MCATT1_VAL  0x0001c787
> -#define CONFIG_SYS_MCIO0_VAL   0x0001430f
> -#define CONFIG_SYS_MCIO1_VAL   0x0001430f
> -
> -#include "pxa-common.h"
> -
> -#endif /* __CONFIG_H */
> --
> 2.7.4
>
Jagan Teki June 17, 2019, 7:44 a.m. UTC | #2 
On Thu, May 30, 2019 at 2:31 AM Tom Rini <trini@konsulko.com> wrote:
>
> Per discussion on the list, drop this board again.
>
> Cc: Vasily Khoruzhick <anarsoul@gmail.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> ---

Applied all to u-boot-spi/master
diff mbox series

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 01ff57cf1bec..0e82cf1583f7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1410,10 +1410,6 @@  config TARGET_H2200
 	bool "Support h2200"
 	select CPU_PXA
 
-config TARGET_ZIPITZ2
-	bool "Support zipitz2"
-	select CPU_PXA
-
 config TARGET_COLIBRI_PXA270
 	bool "Support colibri_pxa270"
 	select CPU_PXA
@@ -1727,7 +1723,6 @@  source "board/woodburn/Kconfig"
 source "board/xilinx/Kconfig"
 source "board/xilinx/zynq/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
-source "board/zipitz2/Kconfig"
 
 source "arch/arm/Kconfig.debug"
 
diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig
deleted file mode 100644
index c6635040a37f..000000000000
--- a/board/zipitz2/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@ 
-if TARGET_ZIPITZ2
-
-config SYS_BOARD
-	default "zipitz2"
-
-config SYS_CONFIG_NAME
-	default "zipitz2"
-
-endif
diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS
deleted file mode 100644
index e027cd361aae..000000000000
--- a/board/zipitz2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@ 
-ZIPITZ2 BOARD
-M:	Vasily Khoruzhick <anarsoul@gmail.com>
-S:	Maintained
-F:	board/zipitz2/
-F:	include/configs/zipitz2.h
-F:	configs/zipitz2_defconfig
diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile
deleted file mode 100644
index 2bbe4364e8f7..000000000000
--- a/board/zipitz2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2009
-# Marek Vasut <marek.vasut@gmail.com>
-#
-# Heavily based on pxa255_idp platform
-
-obj-y	:= zipitz2.o
diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
deleted file mode 100644
index 9208c882c272..000000000000
--- a/board/zipitz2/zipitz2.c
+++ /dev/null
@@ -1,219 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * Heavily based on pxa255_idp platform
- */
-
-#include <common.h>
-#include <command.h>
-#include <serial.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef	CONFIG_CMD_SPI
-void lcd_start(void);
-#else
-inline void lcd_start(void) {};
-#endif
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* arch number of Z2 */
-	gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* Enable LCD */
-	lcd_start();
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	pxa2xx_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-#ifdef	CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
-	/* enable port 2 */
-	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
-		UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-
-void usb_board_stop(void)
-{
-}
-#endif
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-#ifdef	CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	pxa_mmc_register(0);
-	return 0;
-}
-#endif
-
-#ifdef	CONFIG_CMD_SPI
-
-struct {
-	unsigned char	reg;
-	unsigned short	data;
-	unsigned char	mdelay;
-} lcd_data[] = {
-	{ 0x07,	0x0000,	0 },
-	{ 0x13,	0x0000,	10 },
-	{ 0x11,	0x3004,	0 },
-	{ 0x14,	0x200F,	0 },
-	{ 0x10,	0x1a20,	0 },
-	{ 0x13,	0x0040,	50 },
-	{ 0x13,	0x0060,	0 },
-	{ 0x13,	0x0070,	200 },
-	{ 0x01,	0x0127,	0 },
-	{ 0x02,	0x0700,	0 },
-	{ 0x03,	0x1030,	0 },
-	{ 0x08,	0x0208,	0 },
-	{ 0x0B,	0x0620,	0 },
-	{ 0x0C,	0x0110,	0 },
-	{ 0x30,	0x0120,	0 },
-	{ 0x31,	0x0127,	0 },
-	{ 0x32,	0x0000,	0 },
-	{ 0x33,	0x0503,	0 },
-	{ 0x34,	0x0727,	0 },
-	{ 0x35,	0x0124,	0 },
-	{ 0x36,	0x0706,	0 },
-	{ 0x37,	0x0701,	0 },
-	{ 0x38,	0x0F00,	0 },
-	{ 0x39,	0x0F00,	0 },
-	{ 0x40,	0x0000,	0 },
-	{ 0x41,	0x0000,	0 },
-	{ 0x42,	0x013f,	0 },
-	{ 0x43,	0x0000,	0 },
-	{ 0x44,	0x013f,	0 },
-	{ 0x45,	0x0000,	0 },
-	{ 0x46,	0xef00,	0 },
-	{ 0x47,	0x013f,	0 },
-	{ 0x48,	0x0000,	0 },
-	{ 0x07,	0x0015,	30 },
-	{ 0x07,	0x0017,	0 },
-	{ 0x20,	0x0000,	0 },
-	{ 0x21,	0x0000,	0 },
-	{ 0x22,	0x0000,	0 },
-};
-
-void zipitz2_spi_sda(int set)
-{
-	/* GPIO 13 */
-	if (set)
-		writel((1 << 13), GPSR0);
-	else
-		writel((1 << 13), GPCR0);
-}
-
-void zipitz2_spi_scl(int set)
-{
-	/* GPIO 22 */
-	if (set)
-		writel((1 << 22), GPCR0);
-	else
-		writel((1 << 22), GPSR0);
-}
-
-unsigned char zipitz2_spi_read(void)
-{
-	/* GPIO 40 */
-	return !!(readl(GPLR1) & (1 << 8));
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	/* Always valid */
-	return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	/* GPIO 88 low */
-	writel((1 << 24), GPCR2);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	/* GPIO 88 high */
-	writel((1 << 24), GPSR2);
-}
-
-void lcd_start(void)
-{
-	int i;
-	unsigned char reg[3] = { 0x74, 0x00, 0 };
-	unsigned char data[3] = { 0x76, 0, 0 };
-	unsigned char dummy[3] = { 0, 0, 0 };
-
-	/* PWM2 AF */
-	writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
-	/* Enable clock to all PWM */
-	writel(readl(CKEN) | 0x3, CKEN);
-	/* Configure PWM2 */
-	writel(0x4f, PWM_CTRL2);
-	writel(0x2ff, PWM_PWDUTY2);
-	writel(792, PWM_PERVAL2);
-
-	/* Toggle the reset pin to reset the LCD */
-	writel((1 << 19), GPSR0);
-	udelay(100000);
-	writel((1 << 19), GPCR0);
-	udelay(20000);
-	writel((1 << 19), GPSR0);
-	udelay(20000);
-
-	/* Program the LCD init sequence */
-	for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
-		reg[0] = 0x74;
-		reg[1] = 0x0;
-		reg[2] = lcd_data[i].reg;
-		spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
-		data[0] = 0x76;
-		data[1] = lcd_data[i].data >> 8;
-		data[2] = lcd_data[i].data & 0xff;
-		spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
-		if (lcd_data[i].mdelay)
-			udelay(lcd_data[i].mdelay * 1000);
-	}
-
-	writel((1 << 11), GPSR0);
-}
-#endif
diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig
deleted file mode 100644
index 509adcffd9c2..000000000000
--- a/configs/zipitz2_defconfig
+++ /dev/null
@@ -1,34 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_TARGET_ZIPITZ2=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=tty0 console=ttyS2,115200 fbcon=rotate:3"
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="$ "
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_CONS_INDEX=2
-CONFIG_PXA_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
-CONFIG_LZMA=y
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
deleted file mode 100644
index 24fea68a11f0..000000000000
--- a/include/configs/zipitz2.h
+++ /dev/null
@@ -1,186 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Aeronix Zipit Z2 configuration file
- *
- * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
-
-#undef	CONFIG_SKIP_LOWLEVEL_INIT
-#define	CONFIG_PREBOOT
-
-/*
- * Environment settings
- */
-#define	CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_ADDR			0x40000
-#define CONFIG_ENV_SIZE			0x10000
-
-#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
-#define	CONFIG_ARCH_CPU_INIT
-
-#define	CONFIG_BOOTCOMMAND						\
-	"if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
-	"then "								\
-		"source 0xa0000000; "					\
-	"else "								\
-		"bootm 0x50000; "					\
-	"fi; "
-#define	CONFIG_TIMESTAMP
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
-
-/*
- * Serial Console Configuration
- * STUART - the lower serial port on Colibri board
- */
-#define	CONFIG_STUART			1
-
-/*
- * Bootloader Components Configuration
- */
-
-/*
- * MMC Card Configuration
- */
-#ifdef	CONFIG_CMD_MMC
-#define	CONFIG_PXA_MMC_GENERIC
-#define	CONFIG_SYS_MMC_BASE		0xF0000000
-#endif
-
-/*
- * SPI and LCD
- */
-#ifdef	CONFIG_CMD_SPI
-#define	CONFIG_SOFT_SPI
-#define	CONFIG_LCD_ROTATION
-#define	CONFIG_PXA_LCD
-#define	CONFIG_LMS283GF05
-
-#define	SPI_DELAY	udelay(10)
-#define	SPI_SDA(val)	zipitz2_spi_sda(val)
-#define	SPI_SCL(val)	zipitz2_spi_scl(val)
-#define	SPI_READ	zipitz2_spi_read()
-#ifndef	__ASSEMBLY__
-void zipitz2_spi_sda(int);
-void zipitz2_spi_scl(int);
-unsigned char zipitz2_spi_read(void);
-#endif
-#endif
-
-#define	CONFIG_SYS_DEVICE_NULLDEV	1
-
-/*
- * Clock Configuration
- */
-#define CONFIG_SYS_CPUSPEED		0x190		/* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
-
-/*
- * SRAM Map
- */
-#define	PHYS_SRAM			0x5c000000	/* SRAM Bank #1 */
-#define	PHYS_SRAM_SIZE			0x00040000	/* 256k */
-
-/*
- * DRAM Map
- */
-#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
-#define	PHYS_SDRAM_1_SIZE		0x02000000	/* 32 MB */
-
-#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
-#define	CONFIG_SYS_DRAM_SIZE		0x02000000	/* 32 MB DRAM */
-
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
-
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_DRAM_BASE
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
-
-/*
- * NOR FLASH
- */
-#define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-#define PHYS_FLASH_SIZE			0x00800000	/* 8 MB */
-#define PHYS_FLASH_SECT_SIZE		0x00010000	/* 64 KB sectors */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
-
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	240000
-#define CONFIG_SYS_FLASH_LOCK_TOUT	240000
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	240000
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GAFR0_L_VAL	0x02000140
-#define CONFIG_SYS_GAFR0_U_VAL	0x59188000
-#define CONFIG_SYS_GAFR1_L_VAL	0x63900002
-#define CONFIG_SYS_GAFR1_U_VAL	0xaaa03950
-#define CONFIG_SYS_GAFR2_L_VAL	0x0aaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL	0x29000308
-#define CONFIG_SYS_GAFR3_L_VAL	0x54000000
-#define CONFIG_SYS_GAFR3_U_VAL	0x000000d5
-#define CONFIG_SYS_GPCR0_VAL	0x00000000
-#define CONFIG_SYS_GPCR1_VAL	0x00000020
-#define CONFIG_SYS_GPCR2_VAL	0x00000000
-#define CONFIG_SYS_GPCR3_VAL	0x00000000
-#define CONFIG_SYS_GPDR0_VAL	0xdafcee00
-#define CONFIG_SYS_GPDR1_VAL	0xffa3aaab
-#define CONFIG_SYS_GPDR2_VAL	0x8fe9ffff
-#define CONFIG_SYS_GPDR3_VAL	0x001b1f8a
-#define CONFIG_SYS_GPSR0_VAL	0x06080400
-#define CONFIG_SYS_GPSR1_VAL	0x007f0000
-#define CONFIG_SYS_GPSR2_VAL	0x032a0000
-#define CONFIG_SYS_GPSR3_VAL	0x00000180
-
-#define CONFIG_SYS_PSSR_VAL	0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN		0x00511220
-#define CONFIG_SYS_CCCR		0x00000190
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL	0x2ffc38f8
-#define CONFIG_SYS_MSC1_VAL	0x0000ccd1
-#define CONFIG_SYS_MSC2_VAL	0x0000b884
-#define CONFIG_SYS_MDCNFG_VAL	0x08000ba9
-#define CONFIG_SYS_MDREFR_VAL	0x2011a01e
-#define CONFIG_SYS_MDMRS_VAL	0x00000000
-#define CONFIG_SYS_FLYCNFG_VAL	0x00010001
-#define CONFIG_SYS_SXCNFG_VAL	0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL	0x00000001
-#define CONFIG_SYS_MCMEM0_VAL	0x00014307
-#define CONFIG_SYS_MCMEM1_VAL	0x00014307
-#define CONFIG_SYS_MCATT0_VAL	0x0001c787
-#define CONFIG_SYS_MCATT1_VAL	0x0001c787
-#define CONFIG_SYS_MCIO0_VAL	0x0001430f
-#define CONFIG_SYS_MCIO1_VAL	0x0001430f
-
-#include "pxa-common.h"
-
-#endif	/* __CONFIG_H */