diff mbox series

[S18,07/15] ice: Refactor getting/setting coalesce

Message ID 20190416172128.27184-8-anirudh.venkataramanan@intel.com
State Accepted
Delegated to: Jeff Kirsher
Headers show
Series Fixes and feature updates for ice | expand

Commit Message

Anirudh Venkataramanan April 16, 2019, 5:21 p.m. UTC 
From: Brett Creeley <brett.creeley@intel.com>

Currently if the driver has an uneven amount of Rx/Tx queues
setting the coalesce settings through ethtool will result in
an error. This is happening because in the setting coalesce
flow we are reporting an error if either Rx or Tx fails.

Also, the flow for setting/getting per_q_coalesce and
setting/getting coalesce settings for the entire device
is different.

Fix these issues by adding one function, ice_set_q_coalesce(),
and another, ice_get_q_coalesce(), that both getting/setting
per_q and entire device coalesce can use. This makes handling
the error cases generic between the two flows and simplifies
__ice_set_coalesce() and __ice_get_coalesce().

Also, add a header comment to __ice_set_coalesce().

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
[Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> cleaned up commit message]
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 152 ++++++++++++-------
 1 file changed, 93 insertions(+), 59 deletions(-)

Comments

Bowers, AndrewX April 26, 2019, 8:35 p.m. UTC | #1 
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On
> Behalf Of Anirudh Venkataramanan
> Sent: Tuesday, April 16, 2019 10:21 AM
> To: intel-wired-lan@lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S18 07/15] ice: Refactor getting/setting
> coalesce
> 
> From: Brett Creeley <brett.creeley@intel.com>
> 
> Currently if the driver has an uneven amount of Rx/Tx queues setting the
> coalesce settings through ethtool will result in an error. This is happening
> because in the setting coalesce flow we are reporting an error if either Rx or
> Tx fails.
> 
> Also, the flow for setting/getting per_q_coalesce and setting/getting
> coalesce settings for the entire device is different.
> 
> Fix these issues by adding one function, ice_set_q_coalesce(), and another,
> ice_get_q_coalesce(), that both getting/setting per_q and entire device
> coalesce can use. This makes handling the error cases generic between the
> two flows and simplifies
> __ice_set_coalesce() and __ice_get_coalesce().
> 
> Also, add a header comment to __ice_set_coalesce().
> 
> Signed-off-by: Brett Creeley <brett.creeley@intel.com>
> Signed-off-by: Anirudh Venkataramanan
> <anirudh.venkataramanan@intel.com>
> ---
> [Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> cleaned
> up commit message]
> ---
>  drivers/net/ethernet/intel/ice/ice_ethtool.c | 152 ++++++++++++-------
>  1 file changed, 93 insertions(+), 59 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 0bfe696d8077..08ec2f3c5977 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2254,50 +2254,61 @@  ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type,
 	return 0;
 }
 
+/**
+ * ice_get_q_coalesce - get a queue's ITR/INTRL (coalesce) settings
+ * @vsi: VSI associated to the queue for getting ITR/INTRL (coalesce) settings
+ * @ec: coalesce settings to program the device with
+ * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index
+ *
+ * Return 0 on success, and negative under the following conditions:
+ * 1. Getting Tx or Rx ITR/INTRL (coalesce) settings failed.
+ * 2. The q_num passed in is not a valid number/index for Tx and Rx rings.
+ */
+static int
+ice_get_q_coalesce(struct ice_vsi *vsi, struct ethtool_coalesce *ec, int q_num)
+{
+	if (q_num < vsi->num_rxq && q_num < vsi->num_txq) {
+		if (ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
+					&vsi->rx_rings[q_num]->q_vector->rx))
+			return -EINVAL;
+		if (ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
+					&vsi->tx_rings[q_num]->q_vector->tx))
+			return -EINVAL;
+	} else if (q_num < vsi->num_rxq) {
+		if (ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
+					&vsi->rx_rings[q_num]->q_vector->rx))
+			return -EINVAL;
+	} else if (q_num < vsi->num_txq) {
+		if (ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
+					&vsi->tx_rings[q_num]->q_vector->tx))
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  * __ice_get_coalesce - get ITR/INTRL values for the device
  * @netdev: pointer to the netdev associated with this query
  * @ec: ethtool structure to fill with driver's coalesce settings
  * @q_num: queue number to get the coalesce settings for
+ *
+ * If the caller passes in a negative q_num then we return coalesce settings
+ * based on queue number 0, else use the actual q_num passed in.
  */
 static int
 __ice_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec,
 		   int q_num)
 {
 	struct ice_netdev_priv *np = netdev_priv(netdev);
-	int tx = -EINVAL, rx = -EINVAL;
 	struct ice_vsi *vsi = np->vsi;
 
-	if (q_num < 0) {
-		rx = ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
-					 &vsi->rx_rings[0]->q_vector->rx);
-		tx = ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
-					 &vsi->tx_rings[0]->q_vector->tx);
-
-		goto update_coalesced_frames;
-	}
-
-	if (q_num < vsi->num_rxq && q_num < vsi->num_txq) {
-		rx = ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
-					 &vsi->rx_rings[q_num]->q_vector->rx);
-		tx = ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
-					 &vsi->tx_rings[q_num]->q_vector->tx);
-	} else if (q_num < vsi->num_rxq) {
-		rx = ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
-					 &vsi->rx_rings[q_num]->q_vector->rx);
-	} else if (q_num < vsi->num_txq) {
-		tx = ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
-					 &vsi->tx_rings[q_num]->q_vector->tx);
-	} else {
-		/* q_num is invalid for both Rx and Tx queues */
-		return -EINVAL;
-	}
+	if (q_num < 0)
+		q_num = 0;
 
-update_coalesced_frames:
-	/* either q_num is invalid for both Rx and Tx queues or setting coalesce
-	 * failed completely
-	 */
-	if (tx && rx)
+	if (ice_get_q_coalesce(vsi, ec, q_num))
 		return -EINVAL;
 
 	if (q_num < vsi->num_txq)
@@ -2423,54 +2434,77 @@  ice_set_rc_coalesce(enum ice_container_type c_type, struct ethtool_coalesce *ec,
 	return 0;
 }
 
+/**
+ * ice_set_q_coalesce - set a queue's ITR/INTRL (coalesce) settings
+ * @vsi: VSI associated to the queue that need updating
+ * @ec: coalesce settings to program the device with
+ * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index
+ *
+ * Return 0 on success, and negative under the following conditions:
+ * 1. Setting Tx or Rx ITR/INTRL (coalesce) settings failed.
+ * 2. The q_num passed in is not a valid number/index for Tx and Rx rings.
+ */
+static int
+ice_set_q_coalesce(struct ice_vsi *vsi, struct ethtool_coalesce *ec, int q_num)
+{
+	if (q_num < vsi->num_rxq && q_num < vsi->num_txq) {
+		if (ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
+					&vsi->rx_rings[q_num]->q_vector->rx,
+					vsi))
+			return -EINVAL;
+
+		if (ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
+					&vsi->tx_rings[q_num]->q_vector->tx,
+					vsi))
+			return -EINVAL;
+	} else if (q_num < vsi->num_rxq) {
+		if (ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
+					&vsi->rx_rings[q_num]->q_vector->rx,
+					vsi))
+			return -EINVAL;
+	} else if (q_num < vsi->num_txq) {
+		if (ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
+					&vsi->tx_rings[q_num]->q_vector->tx,
+					vsi))
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * __ice_set_coalesce - set ITR/INTRL values for the device
+ * @netdev: pointer to the netdev associated with this query
+ * @ec: ethtool structure to fill with driver's coalesce settings
+ * @q_num: queue number to get the coalesce settings for
+ *
+ * If the caller passes in a negative q_num then we set the coalesce settings
+ * for all Tx/Rx queues, else use the actual q_num passed in.
+ */
 static int
 __ice_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec,
 		   int q_num)
 {
 	struct ice_netdev_priv *np = netdev_priv(netdev);
-	int rx = -EINVAL, tx = -EINVAL;
 	struct ice_vsi *vsi = np->vsi;
 
 	if (q_num < 0) {
 		int i;
 
 		ice_for_each_q_vector(vsi, i) {
-			struct ice_q_vector *q_vector = vsi->q_vectors[i];
-
-			if (ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
-						&q_vector->rx, vsi) ||
-			    ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
-						&q_vector->tx, vsi))
+			if (ice_set_q_coalesce(vsi, ec, i))
 				return -EINVAL;
 		}
-
 		goto set_work_lmt;
 	}
 
-	if (q_num < vsi->num_rxq && q_num < vsi->num_txq) {
-		rx = ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
-					 &vsi->rx_rings[q_num]->q_vector->rx,
-					 vsi);
-		tx = ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
-					 &vsi->tx_rings[q_num]->q_vector->tx,
-					 vsi);
-	} else if (q_num < vsi->num_rxq) {
-		rx = ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
-					 &vsi->rx_rings[q_num]->q_vector->rx,
-					 vsi);
-	} else if (q_num < vsi->num_txq) {
-		tx  = ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
-					  &vsi->tx_rings[q_num]->q_vector->tx,
-					  vsi);
-	}
-
-	/* either q_num is invalid for both Rx and Tx queues or setting coalesce
-	 * failed completely
-	 */
-	if (rx && tx)
+	if (ice_set_q_coalesce(vsi, ec, q_num))
 		return -EINVAL;
 
 set_work_lmt:
+
 	if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
 		vsi->work_lmt = max(ec->tx_max_coalesced_frames_irq,
 				    ec->rx_max_coalesced_frames_irq);