| Message ID | 20190208162414.3996-3-mr.nuke.me@gmail.com |
|---|---|
| State | Accepted |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | [v1,1/3] PCI / ACPI: Do not export pci_get_hp_params() | expand |
On Fri, Feb 08, 2019 at 10:24:12AM -0600, Alexandru Gagniuc wrote: > We used to first parse all the _HPP and _HPX tables before using the > information to program registers of PCIe devices. Up until HPX type 2, > there was only one structure of each type, so we could cheat and store > it on the stack. > > With HPX type 3 we get an arbitrary number of entries, so the above > model doesn't scale that well. Instead of parsing all tables at once, > parse and program each entry separately. For _HPP and _HPX 0 thru 2, > this is functionally equivalent. The change enables the upcoming _HPX3 > to integrate more easily. I think this is tremendous! It's going to simplify this code dramatically. Two comments below. > Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> > --- > drivers/pci/pci-acpi.c | 108 +++++++++++++++++++----------------- > drivers/pci/probe.c | 16 ++---- > include/linux/pci_hotplug.h | 18 +++--- > 3 files changed, 72 insertions(+), 70 deletions(-) > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > index b25e5fa9d1c9..95f4f86d2f34 100644 > --- a/drivers/pci/pci-acpi.c > +++ b/drivers/pci/pci-acpi.c > @@ -119,7 +119,7 @@ phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle) > } > > static acpi_status decode_type0_hpx_record(union acpi_object *record, > - struct hotplug_params *hpx) > + struct hpp_type0 *hpx0) > { > int i; > union acpi_object *fields = record->package.elements; > @@ -132,12 +132,11 @@ static acpi_status decode_type0_hpx_record(union acpi_object *record, > for (i = 2; i < 6; i++) > if (fields[i].type != ACPI_TYPE_INTEGER) > return AE_ERROR; > - hpx->t0 = &hpx->type0_data; > - hpx->t0->revision = revision; > - hpx->t0->cache_line_size = fields[2].integer.value; > - hpx->t0->latency_timer = fields[3].integer.value; > - hpx->t0->enable_serr = fields[4].integer.value; > - hpx->t0->enable_perr = fields[5].integer.value; > + hpx0->revision = revision; > + hpx0->cache_line_size = fields[2].integer.value; > + hpx0->latency_timer = fields[3].integer.value; > + hpx0->enable_serr = fields[4].integer.value; > + hpx0->enable_perr = fields[5].integer.value; > break; > default: > printk(KERN_WARNING > @@ -149,7 +148,7 @@ static acpi_status decode_type0_hpx_record(union acpi_object *record, > } > > static acpi_status decode_type1_hpx_record(union acpi_object *record, > - struct hotplug_params *hpx) > + struct hpp_type1 *hpx1) > { > int i; > union acpi_object *fields = record->package.elements; > @@ -162,11 +161,10 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, > for (i = 2; i < 5; i++) > if (fields[i].type != ACPI_TYPE_INTEGER) > return AE_ERROR; > - hpx->t1 = &hpx->type1_data; > - hpx->t1->revision = revision; > - hpx->t1->max_mem_read = fields[2].integer.value; > - hpx->t1->avg_max_split = fields[3].integer.value; > - hpx->t1->tot_max_split = fields[4].integer.value; > + hpx1->revision = revision; > + hpx1->max_mem_read = fields[2].integer.value; > + hpx1->avg_max_split = fields[3].integer.value; > + hpx1->tot_max_split = fields[4].integer.value; > break; > default: > printk(KERN_WARNING > @@ -178,7 +176,7 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, > } > > static acpi_status decode_type2_hpx_record(union acpi_object *record, > - struct hotplug_params *hpx) > + struct hpp_type2 *hpx2) > { > int i; > union acpi_object *fields = record->package.elements; > @@ -191,24 +189,23 @@ static acpi_status decode_type2_hpx_record(union acpi_object *record, > for (i = 2; i < 18; i++) > if (fields[i].type != ACPI_TYPE_INTEGER) > return AE_ERROR; > - hpx->t2 = &hpx->type2_data; > - hpx->t2->revision = revision; > - hpx->t2->unc_err_mask_and = fields[2].integer.value; > - hpx->t2->unc_err_mask_or = fields[3].integer.value; > - hpx->t2->unc_err_sever_and = fields[4].integer.value; > - hpx->t2->unc_err_sever_or = fields[5].integer.value; > - hpx->t2->cor_err_mask_and = fields[6].integer.value; > - hpx->t2->cor_err_mask_or = fields[7].integer.value; > - hpx->t2->adv_err_cap_and = fields[8].integer.value; > - hpx->t2->adv_err_cap_or = fields[9].integer.value; > - hpx->t2->pci_exp_devctl_and = fields[10].integer.value; > - hpx->t2->pci_exp_devctl_or = fields[11].integer.value; > - hpx->t2->pci_exp_lnkctl_and = fields[12].integer.value; > - hpx->t2->pci_exp_lnkctl_or = fields[13].integer.value; > - hpx->t2->sec_unc_err_sever_and = fields[14].integer.value; > - hpx->t2->sec_unc_err_sever_or = fields[15].integer.value; > - hpx->t2->sec_unc_err_mask_and = fields[16].integer.value; > - hpx->t2->sec_unc_err_mask_or = fields[17].integer.value; > + hpx2->revision = revision; > + hpx2->unc_err_mask_and = fields[2].integer.value; > + hpx2->unc_err_mask_or = fields[3].integer.value; > + hpx2->unc_err_sever_and = fields[4].integer.value; > + hpx2->unc_err_sever_or = fields[5].integer.value; > + hpx2->cor_err_mask_and = fields[6].integer.value; > + hpx2->cor_err_mask_or = fields[7].integer.value; > + hpx2->adv_err_cap_and = fields[8].integer.value; > + hpx2->adv_err_cap_or = fields[9].integer.value; > + hpx2->pci_exp_devctl_and = fields[10].integer.value; > + hpx2->pci_exp_devctl_or = fields[11].integer.value; > + hpx2->pci_exp_lnkctl_and = fields[12].integer.value; > + hpx2->pci_exp_lnkctl_or = fields[13].integer.value; > + hpx2->sec_unc_err_sever_and = fields[14].integer.value; > + hpx2->sec_unc_err_sever_or = fields[15].integer.value; > + hpx2->sec_unc_err_mask_and = fields[16].integer.value; > + hpx2->sec_unc_err_mask_or = fields[17].integer.value; > break; > default: > printk(KERN_WARNING > @@ -219,17 +216,18 @@ static acpi_status decode_type2_hpx_record(union acpi_object *record, > return AE_OK; > } > > -static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) > +static acpi_status acpi_run_hpx(struct pci_dev *dev, acpi_handle handle, > + const struct hotplug_program_ops *hp_ops) > { > acpi_status status; > struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; > union acpi_object *package, *record, *fields; > + struct hpp_type0 hpx0; > + struct hpp_type1 hpx1; > + struct hpp_type2 hpx2; > u32 type; > int i; > > - /* Clear the return buffer with zeros */ > - memset(hpx, 0, sizeof(struct hotplug_params)); > - > status = acpi_evaluate_object(handle, "_HPX", NULL, &buffer); > if (ACPI_FAILURE(status)) > return status; > @@ -257,19 +255,25 @@ static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) > type = fields[0].integer.value; > switch (type) { > case 0: > - status = decode_type0_hpx_record(record, hpx); > + memset(&hpx0, 0, sizeof(hpx0)); > + status = decode_type0_hpx_record(record, &hpx0); > if (ACPI_FAILURE(status)) > goto exit; > + hp_ops->program_type0(dev, &hpx0); > break; > case 1: > - status = decode_type1_hpx_record(record, hpx); > + memset(&hpx1, 0, sizeof(hpx1)); > + status = decode_type1_hpx_record(record, &hpx1); > if (ACPI_FAILURE(status)) > goto exit; > + hp_ops->program_type1(dev, &hpx1); > break; > case 2: > - status = decode_type2_hpx_record(record, hpx); > + memset(&hpx2, 0, sizeof(hpx2)); > + status = decode_type2_hpx_record(record, &hpx2); > if (ACPI_FAILURE(status)) > goto exit; > + hp_ops->program_type2(dev, &hpx2); > break; > default: > printk(KERN_ERR "%s: Type %d record not supported\n", > @@ -283,14 +287,16 @@ static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) > return status; > } > > -static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) > +static acpi_status acpi_run_hpp(struct pci_dev *dev, acpi_handle handle, > + const struct hotplug_program_ops *hp_ops) > { > acpi_status status; > struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; > union acpi_object *package, *fields; > + struct hpp_type0 hpp0; > int i; > > - memset(hpp, 0, sizeof(struct hotplug_params)); > + memset(&hpp0, 0, sizeof(hpp0)); > > status = acpi_evaluate_object(handle, "_HPP", NULL, &buffer); > if (ACPI_FAILURE(status)) > @@ -311,12 +317,13 @@ static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) > } > } > > - hpp->t0 = &hpp->type0_data; > - hpp->t0->revision = 1; > - hpp->t0->cache_line_size = fields[0].integer.value; > - hpp->t0->latency_timer = fields[1].integer.value; > - hpp->t0->enable_serr = fields[2].integer.value; > - hpp->t0->enable_perr = fields[3].integer.value; > + hpp0.revision = 1; > + hpp0.cache_line_size = fields[0].integer.value; > + hpp0.latency_timer = fields[1].integer.value; > + hpp0.enable_serr = fields[2].integer.value; > + hpp0.enable_perr = fields[3].integer.value; > + > + hp_ops->program_type0(dev, &hpp0); > > exit: > kfree(buffer.pointer); > @@ -328,7 +335,8 @@ static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) > * @dev - the pci_dev for which we want parameters > * @hpp - allocated by the caller > */ > -int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp) > +int pci_acpi_program_hp_params(struct pci_dev *dev, > + const struct hotplug_program_ops *hp_ops) > { > acpi_status status; > acpi_handle handle, phandle; > @@ -351,10 +359,10 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp) > * this pci dev. > */ > while (handle) { > - status = acpi_run_hpx(handle, hpp); > + status = acpi_run_hpx(dev, handle, hp_ops); > if (ACPI_SUCCESS(status)) > return 0; > - status = acpi_run_hpp(handle, hpp); > + status = acpi_run_hpp(dev, handle, hp_ops); > if (ACPI_SUCCESS(status)) > return 0; > if (acpi_is_root_bridge(handle)) > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 257b9f6f2ebb..527c209f0c94 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -2131,8 +2131,11 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev) > > static void pci_configure_device(struct pci_dev *dev) > { > - struct hotplug_params hpp; > - int ret; > + static const struct hotplug_program_ops hp_ops = { > + .program_type0 = program_hpp_type0, > + .program_type1 = program_hpp_type1, > + .program_type2 = program_hpp_type2, > + }; What if we just moved program_hpp_type0(), etc from probe.c to pci-acpi.c? The only reason I see to have it in probe.c is for pci_default_type0, and I think that is a pretty obtuse way of doing default configuration. I would have no problem at all just hardcoding those defaults in probe.c and then potentially having them overwritten by _HPP/_HPX. If we moved program_hpp_type0(), etc to pci-acpi.c, we could get rid of the function pointers and all the ACPI-related code would be in one place. > pci_configure_mps(dev); > pci_configure_extended_tags(dev, NULL); > @@ -2140,14 +2143,7 @@ static void pci_configure_device(struct pci_dev *dev) > pci_configure_ltr(dev); > pci_configure_eetlp_prefix(dev); > > - memset(&hpp, 0, sizeof(hpp)); > - ret = pci_get_hp_params(dev, &hpp); > - if (ret) > - return; > - > - program_hpp_type2(dev, hpp.t2); > - program_hpp_type1(dev, hpp.t1); > - program_hpp_type0(dev, hpp.t0); > + pci_acpi_program_hp_params(dev, &hp_ops); > } > > static void pci_release_capabilities(struct pci_dev *dev) > diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h > index 7acc9f91e72b..c85378edf235 100644 > --- a/include/linux/pci_hotplug.h > +++ b/include/linux/pci_hotplug.h > @@ -124,26 +124,24 @@ struct hpp_type2 { > u32 sec_unc_err_mask_or; > }; > > -struct hotplug_params { > - struct hpp_type0 *t0; /* Type0: NULL if not available */ > - struct hpp_type1 *t1; /* Type1: NULL if not available */ > - struct hpp_type2 *t2; /* Type2: NULL if not available */ > - struct hpp_type0 type0_data; > - struct hpp_type1 type1_data; > - struct hpp_type2 type2_data; > +struct hotplug_program_ops { > + void (*program_type0)(struct pci_dev *dev, struct hpp_type0 *hpp); > + void (*program_type1)(struct pci_dev *dev, struct hpp_type1 *hpp); > + void (*program_type2)(struct pci_dev *dev, struct hpp_type2 *hpp); > }; I think a lot of this stuff is only used in drivers/pci, so it could be moved from include/linux/pci_hotplug.h to drivers/pci/pci.h. > #ifdef CONFIG_ACPI > #include <linux/acpi.h> > -int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp); > +int pci_acpi_program_hp_params(struct pci_dev *dev, > + const struct hotplug_program_ops *hp_ops); > bool pciehp_is_native(struct pci_dev *bridge); > int acpi_get_hp_hw_control_from_firmware(struct pci_dev *bridge); > bool shpchp_is_native(struct pci_dev *bridge); > int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); > int acpi_pci_detect_ejectable(acpi_handle handle); > #else > -static inline int pci_get_hp_params(struct pci_dev *dev, > - struct hotplug_params *hpp) > +int pci_acpi_program_hp_params(struct pci_dev *dev, > + const struct hotplug_program_ops *hp_ops); > { > return -ENODEV; > } > -- > 2.19.2 >
On Fri, Apr 19, 2019 at 03:07:45PM -0500, Bjorn Helgaas wrote: > On Fri, Feb 08, 2019 at 10:24:12AM -0600, Alexandru Gagniuc wrote: > > We used to first parse all the _HPP and _HPX tables before using the > > information to program registers of PCIe devices. Up until HPX type 2, > > there was only one structure of each type, so we could cheat and store > > it on the stack. > > > > With HPX type 3 we get an arbitrary number of entries, so the above > > model doesn't scale that well. Instead of parsing all tables at once, > > parse and program each entry separately. For _HPP and _HPX 0 thru 2, > > this is functionally equivalent. The change enables the upcoming _HPX3 > > to integrate more easily. > > I think this is tremendous! It's going to simplify this code > dramatically. Two comments below. > > static void pci_configure_device(struct pci_dev *dev) > > { > > - struct hotplug_params hpp; > > - int ret; > > + static const struct hotplug_program_ops hp_ops = { > > + .program_type0 = program_hpp_type0, > > + .program_type1 = program_hpp_type1, > > + .program_type2 = program_hpp_type2, > > + }; > > What if we just moved program_hpp_type0(), etc from probe.c to > pci-acpi.c? The only reason I see to have it in probe.c is for > pci_default_type0, and I think that is a pretty obtuse way of doing > default configuration. I would have no problem at all just hardcoding > those defaults in probe.c and then potentially having them overwritten > by _HPP/_HPX. Actually, never mind about this. This would be a perfect project for mentoring a Linux newbie. I'll merge this series as-is and any restructuring/cleanup can happen later, since it's not related to this series anyway. Bjorn
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b25e5fa9d1c9..95f4f86d2f34 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -119,7 +119,7 @@ phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle) } static acpi_status decode_type0_hpx_record(union acpi_object *record, - struct hotplug_params *hpx) + struct hpp_type0 *hpx0) { int i; union acpi_object *fields = record->package.elements; @@ -132,12 +132,11 @@ static acpi_status decode_type0_hpx_record(union acpi_object *record, for (i = 2; i < 6; i++) if (fields[i].type != ACPI_TYPE_INTEGER) return AE_ERROR; - hpx->t0 = &hpx->type0_data; - hpx->t0->revision = revision; - hpx->t0->cache_line_size = fields[2].integer.value; - hpx->t0->latency_timer = fields[3].integer.value; - hpx->t0->enable_serr = fields[4].integer.value; - hpx->t0->enable_perr = fields[5].integer.value; + hpx0->revision = revision; + hpx0->cache_line_size = fields[2].integer.value; + hpx0->latency_timer = fields[3].integer.value; + hpx0->enable_serr = fields[4].integer.value; + hpx0->enable_perr = fields[5].integer.value; break; default: printk(KERN_WARNING @@ -149,7 +148,7 @@ static acpi_status decode_type0_hpx_record(union acpi_object *record, } static acpi_status decode_type1_hpx_record(union acpi_object *record, - struct hotplug_params *hpx) + struct hpp_type1 *hpx1) { int i; union acpi_object *fields = record->package.elements; @@ -162,11 +161,10 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, for (i = 2; i < 5; i++) if (fields[i].type != ACPI_TYPE_INTEGER) return AE_ERROR; - hpx->t1 = &hpx->type1_data; - hpx->t1->revision = revision; - hpx->t1->max_mem_read = fields[2].integer.value; - hpx->t1->avg_max_split = fields[3].integer.value; - hpx->t1->tot_max_split = fields[4].integer.value; + hpx1->revision = revision; + hpx1->max_mem_read = fields[2].integer.value; + hpx1->avg_max_split = fields[3].integer.value; + hpx1->tot_max_split = fields[4].integer.value; break; default: printk(KERN_WARNING @@ -178,7 +176,7 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, } static acpi_status decode_type2_hpx_record(union acpi_object *record, - struct hotplug_params *hpx) + struct hpp_type2 *hpx2) { int i; union acpi_object *fields = record->package.elements; @@ -191,24 +189,23 @@ static acpi_status decode_type2_hpx_record(union acpi_object *record, for (i = 2; i < 18; i++) if (fields[i].type != ACPI_TYPE_INTEGER) return AE_ERROR; - hpx->t2 = &hpx->type2_data; - hpx->t2->revision = revision; - hpx->t2->unc_err_mask_and = fields[2].integer.value; - hpx->t2->unc_err_mask_or = fields[3].integer.value; - hpx->t2->unc_err_sever_and = fields[4].integer.value; - hpx->t2->unc_err_sever_or = fields[5].integer.value; - hpx->t2->cor_err_mask_and = fields[6].integer.value; - hpx->t2->cor_err_mask_or = fields[7].integer.value; - hpx->t2->adv_err_cap_and = fields[8].integer.value; - hpx->t2->adv_err_cap_or = fields[9].integer.value; - hpx->t2->pci_exp_devctl_and = fields[10].integer.value; - hpx->t2->pci_exp_devctl_or = fields[11].integer.value; - hpx->t2->pci_exp_lnkctl_and = fields[12].integer.value; - hpx->t2->pci_exp_lnkctl_or = fields[13].integer.value; - hpx->t2->sec_unc_err_sever_and = fields[14].integer.value; - hpx->t2->sec_unc_err_sever_or = fields[15].integer.value; - hpx->t2->sec_unc_err_mask_and = fields[16].integer.value; - hpx->t2->sec_unc_err_mask_or = fields[17].integer.value; + hpx2->revision = revision; + hpx2->unc_err_mask_and = fields[2].integer.value; + hpx2->unc_err_mask_or = fields[3].integer.value; + hpx2->unc_err_sever_and = fields[4].integer.value; + hpx2->unc_err_sever_or = fields[5].integer.value; + hpx2->cor_err_mask_and = fields[6].integer.value; + hpx2->cor_err_mask_or = fields[7].integer.value; + hpx2->adv_err_cap_and = fields[8].integer.value; + hpx2->adv_err_cap_or = fields[9].integer.value; + hpx2->pci_exp_devctl_and = fields[10].integer.value; + hpx2->pci_exp_devctl_or = fields[11].integer.value; + hpx2->pci_exp_lnkctl_and = fields[12].integer.value; + hpx2->pci_exp_lnkctl_or = fields[13].integer.value; + hpx2->sec_unc_err_sever_and = fields[14].integer.value; + hpx2->sec_unc_err_sever_or = fields[15].integer.value; + hpx2->sec_unc_err_mask_and = fields[16].integer.value; + hpx2->sec_unc_err_mask_or = fields[17].integer.value; break; default: printk(KERN_WARNING @@ -219,17 +216,18 @@ static acpi_status decode_type2_hpx_record(union acpi_object *record, return AE_OK; } -static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) +static acpi_status acpi_run_hpx(struct pci_dev *dev, acpi_handle handle, + const struct hotplug_program_ops *hp_ops) { acpi_status status; struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *package, *record, *fields; + struct hpp_type0 hpx0; + struct hpp_type1 hpx1; + struct hpp_type2 hpx2; u32 type; int i; - /* Clear the return buffer with zeros */ - memset(hpx, 0, sizeof(struct hotplug_params)); - status = acpi_evaluate_object(handle, "_HPX", NULL, &buffer); if (ACPI_FAILURE(status)) return status; @@ -257,19 +255,25 @@ static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) type = fields[0].integer.value; switch (type) { case 0: - status = decode_type0_hpx_record(record, hpx); + memset(&hpx0, 0, sizeof(hpx0)); + status = decode_type0_hpx_record(record, &hpx0); if (ACPI_FAILURE(status)) goto exit; + hp_ops->program_type0(dev, &hpx0); break; case 1: - status = decode_type1_hpx_record(record, hpx); + memset(&hpx1, 0, sizeof(hpx1)); + status = decode_type1_hpx_record(record, &hpx1); if (ACPI_FAILURE(status)) goto exit; + hp_ops->program_type1(dev, &hpx1); break; case 2: - status = decode_type2_hpx_record(record, hpx); + memset(&hpx2, 0, sizeof(hpx2)); + status = decode_type2_hpx_record(record, &hpx2); if (ACPI_FAILURE(status)) goto exit; + hp_ops->program_type2(dev, &hpx2); break; default: printk(KERN_ERR "%s: Type %d record not supported\n", @@ -283,14 +287,16 @@ static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) return status; } -static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) +static acpi_status acpi_run_hpp(struct pci_dev *dev, acpi_handle handle, + const struct hotplug_program_ops *hp_ops) { acpi_status status; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *package, *fields; + struct hpp_type0 hpp0; int i; - memset(hpp, 0, sizeof(struct hotplug_params)); + memset(&hpp0, 0, sizeof(hpp0)); status = acpi_evaluate_object(handle, "_HPP", NULL, &buffer); if (ACPI_FAILURE(status)) @@ -311,12 +317,13 @@ static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) } } - hpp->t0 = &hpp->type0_data; - hpp->t0->revision = 1; - hpp->t0->cache_line_size = fields[0].integer.value; - hpp->t0->latency_timer = fields[1].integer.value; - hpp->t0->enable_serr = fields[2].integer.value; - hpp->t0->enable_perr = fields[3].integer.value; + hpp0.revision = 1; + hpp0.cache_line_size = fields[0].integer.value; + hpp0.latency_timer = fields[1].integer.value; + hpp0.enable_serr = fields[2].integer.value; + hpp0.enable_perr = fields[3].integer.value; + + hp_ops->program_type0(dev, &hpp0); exit: kfree(buffer.pointer); @@ -328,7 +335,8 @@ static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) * @dev - the pci_dev for which we want parameters * @hpp - allocated by the caller */ -int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp) +int pci_acpi_program_hp_params(struct pci_dev *dev, + const struct hotplug_program_ops *hp_ops) { acpi_status status; acpi_handle handle, phandle; @@ -351,10 +359,10 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp) * this pci dev. */ while (handle) { - status = acpi_run_hpx(handle, hpp); + status = acpi_run_hpx(dev, handle, hp_ops); if (ACPI_SUCCESS(status)) return 0; - status = acpi_run_hpp(handle, hpp); + status = acpi_run_hpp(dev, handle, hp_ops); if (ACPI_SUCCESS(status)) return 0; if (acpi_is_root_bridge(handle)) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 257b9f6f2ebb..527c209f0c94 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2131,8 +2131,11 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev) static void pci_configure_device(struct pci_dev *dev) { - struct hotplug_params hpp; - int ret; + static const struct hotplug_program_ops hp_ops = { + .program_type0 = program_hpp_type0, + .program_type1 = program_hpp_type1, + .program_type2 = program_hpp_type2, + }; pci_configure_mps(dev); pci_configure_extended_tags(dev, NULL); @@ -2140,14 +2143,7 @@ static void pci_configure_device(struct pci_dev *dev) pci_configure_ltr(dev); pci_configure_eetlp_prefix(dev); - memset(&hpp, 0, sizeof(hpp)); - ret = pci_get_hp_params(dev, &hpp); - if (ret) - return; - - program_hpp_type2(dev, hpp.t2); - program_hpp_type1(dev, hpp.t1); - program_hpp_type0(dev, hpp.t0); + pci_acpi_program_hp_params(dev, &hp_ops); } static void pci_release_capabilities(struct pci_dev *dev) diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 7acc9f91e72b..c85378edf235 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -124,26 +124,24 @@ struct hpp_type2 { u32 sec_unc_err_mask_or; }; -struct hotplug_params { - struct hpp_type0 *t0; /* Type0: NULL if not available */ - struct hpp_type1 *t1; /* Type1: NULL if not available */ - struct hpp_type2 *t2; /* Type2: NULL if not available */ - struct hpp_type0 type0_data; - struct hpp_type1 type1_data; - struct hpp_type2 type2_data; +struct hotplug_program_ops { + void (*program_type0)(struct pci_dev *dev, struct hpp_type0 *hpp); + void (*program_type1)(struct pci_dev *dev, struct hpp_type1 *hpp); + void (*program_type2)(struct pci_dev *dev, struct hpp_type2 *hpp); }; #ifdef CONFIG_ACPI #include <linux/acpi.h> -int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp); +int pci_acpi_program_hp_params(struct pci_dev *dev, + const struct hotplug_program_ops *hp_ops); bool pciehp_is_native(struct pci_dev *bridge); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *bridge); bool shpchp_is_native(struct pci_dev *bridge); int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); int acpi_pci_detect_ejectable(acpi_handle handle); #else -static inline int pci_get_hp_params(struct pci_dev *dev, - struct hotplug_params *hpp) +int pci_acpi_program_hp_params(struct pci_dev *dev, + const struct hotplug_program_ops *hp_ops); { return -ENODEV; }
We used to first parse all the _HPP and _HPX tables before using the information to program registers of PCIe devices. Up until HPX type 2, there was only one structure of each type, so we could cheat and store it on the stack. With HPX type 3 we get an arbitrary number of entries, so the above model doesn't scale that well. Instead of parsing all tables at once, parse and program each entry separately. For _HPP and _HPX 0 thru 2, this is functionally equivalent. The change enables the upcoming _HPX3 to integrate more easily. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> --- drivers/pci/pci-acpi.c | 108 +++++++++++++++++++----------------- drivers/pci/probe.c | 16 ++---- include/linux/pci_hotplug.h | 18 +++--- 3 files changed, 72 insertions(+), 70 deletions(-)