Message ID | 20190411183158.19935-1-bernd.kuhls@t-online.de |
---|---|
State | Changes Requested |
Headers | show |
Series | [RFC,1/1] package/mesa3d: switch build system to meson | expand |
On 11/04/2019 20:31, Bernd Kuhls wrote: > Remove all patches related to autotools. Good that you do that, however... > > Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> > --- > This patch is only slightly tested, expect breakages ;) > > ...vert-order-for-wayland-scanner-check.patch | 51 --------- > .../mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch | 37 ------ > package/mesa3d/Config.in | 3 - > package/mesa3d/mesa3d.mk | 108 ++++++++---------- > 4 files changed, 48 insertions(+), 151 deletions(-) > delete mode 100644 package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch > delete mode 100644 package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch > > diff --git a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch b/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch > deleted file mode 100644 > index 5135528795..0000000000 > --- a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch > +++ /dev/null > @@ -1,51 +0,0 @@ > -From ef96bac7cbbb11b98606864ead0f731dd5b71d5a Mon Sep 17 00:00:00 2001 > -From: Gustavo Zacarias <gustavo@zacarias.com.ar> > -Date: Thu, 17 Nov 2016 15:36:54 -0300 > -Subject: [PATCH] configure.ac: invert order for wayland-scanner check > - > -When cross-compiling the .pc file might point to the wrong > -wayland-scanner binary (target rather than host) resulting in a > -non-executable and wrong scanner. > -Try searching the PATH first, and if that fails fall back into > -pkg-config. AFAICS meson *only* looks at pkg-config for wayland-scanner. It does use dep_wl_scanner = dependency('wayland-scanner', native: true) so in theory it should look for the host wayland-scanner rather than the target one, but I'm not sure if we set up meson in a way that it would be able to make that distinction. [snip] > --- a/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch > +++ /dev/null > @@ -1,37 +0,0 @@ > -From 94bceeb621e36f3188c6246a763def8695526578 Mon Sep 17 00:00:00 2001 > -From: Valentin Korenblit <valentinkorenblit@gmail.com> > -Date: Sat, 20 Oct 2018 10:56:23 +0200 > -Subject: [PATCH] Set proper value for LIBCLC_INCLUDEDIR > - > -LIBCLC_INCLUDEDIR is the location where mesa3d OpenCL implementation > -will look for OpenCL "headers" on the target, when building the OpenCL > -kernels. > - > -The value returned by pkg-config for includedir is relevant when > -cross-compiling, on the build machine. But in this specific case, we > -really need a value that is valid on the target. > - > -Those headers are installed by the libclc package in /usr/share so > -that they are not removed by Buildroot target-finalize logic. The meson infrastructure uses '-DLIBCLC_INCLUDEDIR="@0@/"'.format(dep_clc.get_pkgconfig_variable('includedir')) which I expect will give no joy either. [snip] > diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in > index 3f44e94229..6070e5e039 100644 > --- a/package/mesa3d/Config.in > +++ b/package/mesa3d/Config.in > @@ -129,7 +129,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600 > select BR2_PACKAGE_LLVM_AMDGPU if BR2_PACKAGE_MESA3D_LLVM > select BR2_PACKAGE_ELFUTILS if BR2_PACKAGE_MESA3D_LLVM > select BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS if BR2_PACKAGE_MESA3D_LLVM > - select BR2_PACKAGE_MESA3D_NEEDS_XA Why does this get removed? > help > Driver for ATI/AMD Radeon R600/R700/HD5000/HD6000 GPUs. > > @@ -151,7 +150,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI > select BR2_PACKAGE_LLVM_AMDGPU > select BR2_PACKAGE_ELFUTILS > select BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS > - select BR2_PACKAGE_MESA3D_NEEDS_XA > help > Driver for ATI/AMD Radeon HD7000/HD8000/Rx200 GPUs. > > @@ -184,7 +182,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4 > select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER > select BR2_PACKAGE_MESA3D_GALLIUM_KMSRO > select BR2_PACKAGE_LIBDRM_VC4 > - select BR2_PACKAGE_MESA3D_NEEDS_XA > select BR2_PACKAGE_MESA3D_OPENGL_EGL > help > Driver for Broadcom VC4 (rpi2/3) GPUs. > diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk > index 02c8a8a57a..67edab89af 100644 > --- a/package/mesa3d/mesa3d.mk > +++ b/package/mesa3d/mesa3d.mk > @@ -21,31 +21,22 @@ MESA3D_PROVIDES = > MESA3D_DEPENDENCIES = \ > host-bison \ > host-flex \ > + host-python3-mako \ Why does this get added? > expat \ > libdrm \ > zlib > > -# Disable assembly usage. > -MESA3D_CONF_OPTS = --disable-asm > - > -# autotools are deprecated in favour of meson, for now force autotools > -MESA3D_CONF_OPTS += --enable-autotools > - > -# Disable static, otherwise configure will fail with: "Cannot enable both static > -# and shared." > -ifeq ($(BR2_SHARED_STATIC_LIBS),y) > -MESA3D_CONF_OPTS += --disable-static > -endif > +MESA3D_CONF_OPTS = \ > + -Dasm=false \ > + -Dgallium-omx=disabled Why does this get added? > > ifeq ($(BR2_PACKAGE_MESA3D_LLVM),y) > MESA3D_DEPENDENCIES += host-llvm llvm > -MESA3D_CONF_OPTS += \ > - --with-llvm-prefix=$(STAGING_DIR)/usr \ > - --enable-llvm-shared-libs \ > - --enable-llvm > +MESA3D_CONF_ENV += LLVM_CONFIG=$(STAGING_DIR)/usr/bin/llvm-config > +MESA3D_CONF_OPTS += -Dllvm=true > else > # Avoid automatic search of llvm-config > -MESA3D_CONF_OPTS += --disable-llvm > +MESA3D_CONF_OPTS += -Dllvm=false > endif > > # Disable opencl-icd: OpenCL lib will be named libOpenCL instead of > @@ -53,11 +44,9 @@ endif > ifeq ($(BR2_PACKAGE_MESA3D_OPENCL),y) > MESA3D_PROVIDES += libopencl > MESA3D_DEPENDENCIES += clang libclc > -MESA3D_CONF_OPTS += --enable-opencl \ > - --disable-opencl-icd \ No equivalent of this is needed? > - --with-clang-libdir=$(STAGING_DIR)/usr/lib > +MESA3D_CONF_OPTS += -Dgallium-opencl=standalone Can you explain what are the options, and why standalone is chosen? > else > -MESA3D_CONF_OPTS += --disable-opencl > +MESA3D_CONF_OPTS += -Dgallium-opencl=disabled > endif > > ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS),y) > @@ -82,17 +71,17 @@ MESA3D_DEPENDENCIES += \ > xlib_libXxf86vm \ > xorgproto \ > libxcb > -MESA3D_CONF_OPTS += --enable-glx --disable-mangling > +MESA3D_CONF_OPTS += -Dglx=auto > # quote from mesa3d configure "Building xa requires at least one non swrast gallium driver." > ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_XA),y) > -MESA3D_CONF_OPTS += --enable-xa > +MESA3D_CONF_OPTS += -Dgallium-xa=true > else > -MESA3D_CONF_OPTS += --disable-xa > +MESA3D_CONF_OPTS += -Dgallium-xa=false > endif > else > MESA3D_CONF_OPTS += \ > - --disable-glx \ > - --disable-xa > + -Dglx=disabled \ > + -Dgallium-xa=false > endif > > # Drivers > @@ -112,63 +101,62 @@ MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST) += swrast > MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I915) += i915 > MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I965) += i965 > MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU) += nouveau > -MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += radeon > +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += r100 Please explain this in the commit message. > # Vulkan Drivers > MESA3D_VULKAN_DRIVERS-$(BR2_PACKAGE_MESA3D_VULKAN_DRIVER_INTEL) += intel > > ifeq ($(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER),) > MESA3D_CONF_OPTS += \ > - --without-gallium-drivers \ > - --disable-gallium-extra-hud > + -Dgallium-drivers= \ > + -Dgallium-extra-hud=false > else > MESA3D_CONF_OPTS += \ > - --enable-shared-glapi \ > - --with-gallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ > - --enable-gallium-extra-hud > + -Dshared-glapi=true \ > + -Dgallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ > + -Dgallium-extra-hud=true > endif > > ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),) > MESA3D_CONF_OPTS += \ > - --without-dri-drivers --disable-dri3 > + -Ddri-drivers= -Ddri3=false > else > ifeq ($(BR2_PACKAGE_XLIB_LIBXSHMFENCE),y) > MESA3D_DEPENDENCIES += xlib_libxshmfence > -MESA3D_CONF_OPTS += --enable-dri3 > +MESA3D_CONF_OPTS += -Ddri3=true > else > -MESA3D_CONF_OPTS += --disable-dri3 > +MESA3D_CONF_OPTS += -Ddri3=false > endif > MESA3D_CONF_OPTS += \ > - --enable-shared-glapi \ > - --enable-driglx-direct \ > - --with-dri-driverdir=/usr/lib/dri \ No need to specify this anymore? Regards, Arnout > - --with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) > + -Dshared-glapi=true \ > + -Dglx-direct=true \ > + -Ddri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) > endif > > ifeq ($(BR2_PACKAGE_MESA3D_VULKAN_DRIVER),) > MESA3D_CONF_OPTS += \ > - --without-vulkan-drivers > + -Dvulkan-drivers= > else > MESA3D_DEPENDENCIES += xlib_libxshmfence > MESA3D_CONF_OPTS += \ > - --enable-dri3 \ > - --with-vulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) > + -Ddri3=true \ > + -Dvulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) > endif > > # APIs > > ifeq ($(BR2_PACKAGE_MESA3D_OSMESA),y) > -MESA3D_CONF_OPTS += --enable-osmesa > +MESA3D_CONF_OPTS += -Dosmesa=classic > else > -MESA3D_CONF_OPTS += --disable-osmesa > +MESA3D_CONF_OPTS += -Dosmesa=none > endif > > # Always enable OpenGL: > # - it is needed for GLES (mesa3d's ./configure is a bit weird) > -MESA3D_CONF_OPTS += --enable-opengl --enable-dri > +MESA3D_CONF_OPTS += -Dopengl=true -Dglx=dri > > # libva and mesa3d have a circular dependency > # we do not need libva support in mesa3d, therefore disable this option > -MESA3D_CONF_OPTS += --disable-va > +MESA3D_CONF_OPTS += -Dgallium-va=false > > # libGL is only provided for a full xorg stack > ifeq ($(BR2_PACKAGE_XORG7),y) > @@ -201,51 +189,51 @@ MESA3D_PLATFORMS += x11 > endif > > MESA3D_CONF_OPTS += \ > - --with-platforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) > + -Dplatforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) > > ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_EGL),y) > MESA3D_PROVIDES += libegl > MESA3D_CONF_OPTS += \ > - --enable-gbm \ > - --enable-egl > + -Dgbm=true \ > + -Degl=true > else > MESA3D_CONF_OPTS += \ > - --disable-egl > + -Degl=true=false > endif > > ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y) > MESA3D_PROVIDES += libgles > -MESA3D_CONF_OPTS += --enable-gles1 --enable-gles2 > +MESA3D_CONF_OPTS += -Dgles1=true -Dgles2=true > else > -MESA3D_CONF_OPTS += --disable-gles1 --disable-gles2 > +MESA3D_CONF_OPTS += -Dgles1=false -Dgles2=false > endif > > ifeq ($(BR2_PACKAGE_XLIB_LIBXVMC),y) > MESA3D_DEPENDENCIES += xlib_libXvMC > -MESA3D_CONF_OPTS += --enable-xvmc > +MESA3D_CONF_OPTS += -Dgallium-xvmc=true > else > -MESA3D_CONF_OPTS += --disable-xvmc > +MESA3D_CONF_OPTS += -Dgallium-xvmc=false > endif > > ifeq ($(BR2_PACKAGE_LIBUNWIND),y) > -MESA3D_CONF_OPTS += --enable-libunwind > +MESA3D_CONF_OPTS += -Dlibunwind=true > MESA3D_DEPENDENCIES += libunwind > else > -MESA3D_CONF_OPTS += --disable-libunwind > +MESA3D_CONF_OPTS += -Dlibunwind=false > endif > > ifeq ($(BR2_PACKAGE_LIBVDPAU),y) > MESA3D_DEPENDENCIES += libvdpau > -MESA3D_CONF_OPTS += --enable-vdpau > +MESA3D_CONF_OPTS += -Dgallium-vdpau=true > else > -MESA3D_CONF_OPTS += --disable-vdpau > +MESA3D_CONF_OPTS += -Dgallium-vdpau=false > endif > > ifeq ($(BR2_PACKAGE_LM_SENSORS),y) > -MESA3D_CONF_OPTS += --enable-lmsensors > +MESA3D_CONF_OPTS += -Dlmsensors=true > MESA3D_DEPENDENCIES += lm-sensors > else > -MESA3D_CONF_OPTS += --disable-lmsensors > +MESA3D_CONF_OPTS += -Dlmsensors=false > endif > > -$(eval $(autotools-package)) > +$(eval $(meson-package)) >
Hi Arnout, Bernd, All, Le 13/04/2019 à 14:50, Arnout Vandecappelle a écrit : > > > On 11/04/2019 20:31, Bernd Kuhls wrote: >> Remove all patches related to autotools. > > Good that you do that, however... I asked Bernd if he was working on a patch switching to meson build system [1]. He sent to the mailing list this patch which is a preliminary version. I guess the commit log was not ready ;-) I'm looking at it and I found already some issues. [1] http://lists.busybox.net/pipermail/buildroot/2019-April/247587.html Best regards, Romain > >> >> Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> >> --- >> This patch is only slightly tested, expect breakages ;) >> >> ...vert-order-for-wayland-scanner-check.patch | 51 --------- >> .../mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch | 37 ------ >> package/mesa3d/Config.in | 3 - >> package/mesa3d/mesa3d.mk | 108 ++++++++---------- >> 4 files changed, 48 insertions(+), 151 deletions(-) >> delete mode 100644 package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch >> delete mode 100644 package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch >> >> diff --git a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch b/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch >> deleted file mode 100644 >> index 5135528795..0000000000 >> --- a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch >> +++ /dev/null >> @@ -1,51 +0,0 @@ >> -From ef96bac7cbbb11b98606864ead0f731dd5b71d5a Mon Sep 17 00:00:00 2001 >> -From: Gustavo Zacarias <gustavo@zacarias.com.ar> >> -Date: Thu, 17 Nov 2016 15:36:54 -0300 >> -Subject: [PATCH] configure.ac: invert order for wayland-scanner check >> - >> -When cross-compiling the .pc file might point to the wrong >> -wayland-scanner binary (target rather than host) resulting in a >> -non-executable and wrong scanner. >> -Try searching the PATH first, and if that fails fall back into >> -pkg-config. > > AFAICS meson *only* looks at pkg-config for wayland-scanner. It does use > > dep_wl_scanner = dependency('wayland-scanner', native: true) > > so in theory it should look for the host wayland-scanner rather than the target > one, but I'm not sure if we set up meson in a way that it would be able to make > that distinction. > > [snip] >> --- a/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch >> +++ /dev/null >> @@ -1,37 +0,0 @@ >> -From 94bceeb621e36f3188c6246a763def8695526578 Mon Sep 17 00:00:00 2001 >> -From: Valentin Korenblit <valentinkorenblit@gmail.com> >> -Date: Sat, 20 Oct 2018 10:56:23 +0200 >> -Subject: [PATCH] Set proper value for LIBCLC_INCLUDEDIR >> - >> -LIBCLC_INCLUDEDIR is the location where mesa3d OpenCL implementation >> -will look for OpenCL "headers" on the target, when building the OpenCL >> -kernels. >> - >> -The value returned by pkg-config for includedir is relevant when >> -cross-compiling, on the build machine. But in this specific case, we >> -really need a value that is valid on the target. >> - >> -Those headers are installed by the libclc package in /usr/share so >> -that they are not removed by Buildroot target-finalize logic. > > The meson infrastructure uses > > '-DLIBCLC_INCLUDEDIR="@0@/"'.format(dep_clc.get_pkgconfig_variable('includedir')) > > which I expect will give no joy either. > > [snip] >> diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in >> index 3f44e94229..6070e5e039 100644 >> --- a/package/mesa3d/Config.in >> +++ b/package/mesa3d/Config.in >> @@ -129,7 +129,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600 >> select BR2_PACKAGE_LLVM_AMDGPU if BR2_PACKAGE_MESA3D_LLVM >> select BR2_PACKAGE_ELFUTILS if BR2_PACKAGE_MESA3D_LLVM >> select BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS if BR2_PACKAGE_MESA3D_LLVM >> - select BR2_PACKAGE_MESA3D_NEEDS_XA > > Why does this get removed? > >> help >> Driver for ATI/AMD Radeon R600/R700/HD5000/HD6000 GPUs. >> >> @@ -151,7 +150,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI >> select BR2_PACKAGE_LLVM_AMDGPU >> select BR2_PACKAGE_ELFUTILS >> select BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS >> - select BR2_PACKAGE_MESA3D_NEEDS_XA >> help >> Driver for ATI/AMD Radeon HD7000/HD8000/Rx200 GPUs. >> >> @@ -184,7 +182,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4 >> select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER >> select BR2_PACKAGE_MESA3D_GALLIUM_KMSRO >> select BR2_PACKAGE_LIBDRM_VC4 >> - select BR2_PACKAGE_MESA3D_NEEDS_XA >> select BR2_PACKAGE_MESA3D_OPENGL_EGL >> help >> Driver for Broadcom VC4 (rpi2/3) GPUs. >> diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk >> index 02c8a8a57a..67edab89af 100644 >> --- a/package/mesa3d/mesa3d.mk >> +++ b/package/mesa3d/mesa3d.mk >> @@ -21,31 +21,22 @@ MESA3D_PROVIDES = >> MESA3D_DEPENDENCIES = \ >> host-bison \ >> host-flex \ >> + host-python3-mako \ > > Why does this get added? > >> expat \ >> libdrm \ >> zlib >> >> -# Disable assembly usage. >> -MESA3D_CONF_OPTS = --disable-asm >> - >> -# autotools are deprecated in favour of meson, for now force autotools >> -MESA3D_CONF_OPTS += --enable-autotools >> - >> -# Disable static, otherwise configure will fail with: "Cannot enable both static >> -# and shared." >> -ifeq ($(BR2_SHARED_STATIC_LIBS),y) >> -MESA3D_CONF_OPTS += --disable-static >> -endif >> +MESA3D_CONF_OPTS = \ >> + -Dasm=false \ >> + -Dgallium-omx=disabled > > Why does this get added? > >> >> ifeq ($(BR2_PACKAGE_MESA3D_LLVM),y) >> MESA3D_DEPENDENCIES += host-llvm llvm >> -MESA3D_CONF_OPTS += \ >> - --with-llvm-prefix=$(STAGING_DIR)/usr \ >> - --enable-llvm-shared-libs \ >> - --enable-llvm >> +MESA3D_CONF_ENV += LLVM_CONFIG=$(STAGING_DIR)/usr/bin/llvm-config >> +MESA3D_CONF_OPTS += -Dllvm=true >> else >> # Avoid automatic search of llvm-config >> -MESA3D_CONF_OPTS += --disable-llvm >> +MESA3D_CONF_OPTS += -Dllvm=false >> endif >> >> # Disable opencl-icd: OpenCL lib will be named libOpenCL instead of >> @@ -53,11 +44,9 @@ endif >> ifeq ($(BR2_PACKAGE_MESA3D_OPENCL),y) >> MESA3D_PROVIDES += libopencl >> MESA3D_DEPENDENCIES += clang libclc >> -MESA3D_CONF_OPTS += --enable-opencl \ >> - --disable-opencl-icd \ > > No equivalent of this is needed? > >> - --with-clang-libdir=$(STAGING_DIR)/usr/lib >> +MESA3D_CONF_OPTS += -Dgallium-opencl=standalone > > Can you explain what are the options, and why standalone is chosen? > >> else >> -MESA3D_CONF_OPTS += --disable-opencl >> +MESA3D_CONF_OPTS += -Dgallium-opencl=disabled >> endif >> >> ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS),y) >> @@ -82,17 +71,17 @@ MESA3D_DEPENDENCIES += \ >> xlib_libXxf86vm \ >> xorgproto \ >> libxcb >> -MESA3D_CONF_OPTS += --enable-glx --disable-mangling >> +MESA3D_CONF_OPTS += -Dglx=auto >> # quote from mesa3d configure "Building xa requires at least one non swrast gallium driver." >> ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_XA),y) >> -MESA3D_CONF_OPTS += --enable-xa >> +MESA3D_CONF_OPTS += -Dgallium-xa=true >> else >> -MESA3D_CONF_OPTS += --disable-xa >> +MESA3D_CONF_OPTS += -Dgallium-xa=false >> endif >> else >> MESA3D_CONF_OPTS += \ >> - --disable-glx \ >> - --disable-xa >> + -Dglx=disabled \ >> + -Dgallium-xa=false >> endif >> >> # Drivers >> @@ -112,63 +101,62 @@ MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST) += swrast >> MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I915) += i915 >> MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I965) += i965 >> MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU) += nouveau >> -MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += radeon >> +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += r100 > > Please explain this in the commit message. > >> # Vulkan Drivers >> MESA3D_VULKAN_DRIVERS-$(BR2_PACKAGE_MESA3D_VULKAN_DRIVER_INTEL) += intel >> >> ifeq ($(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER),) >> MESA3D_CONF_OPTS += \ >> - --without-gallium-drivers \ >> - --disable-gallium-extra-hud >> + -Dgallium-drivers= \ >> + -Dgallium-extra-hud=false >> else >> MESA3D_CONF_OPTS += \ >> - --enable-shared-glapi \ >> - --with-gallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ >> - --enable-gallium-extra-hud >> + -Dshared-glapi=true \ >> + -Dgallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ >> + -Dgallium-extra-hud=true >> endif >> >> ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),) >> MESA3D_CONF_OPTS += \ >> - --without-dri-drivers --disable-dri3 >> + -Ddri-drivers= -Ddri3=false >> else >> ifeq ($(BR2_PACKAGE_XLIB_LIBXSHMFENCE),y) >> MESA3D_DEPENDENCIES += xlib_libxshmfence >> -MESA3D_CONF_OPTS += --enable-dri3 >> +MESA3D_CONF_OPTS += -Ddri3=true >> else >> -MESA3D_CONF_OPTS += --disable-dri3 >> +MESA3D_CONF_OPTS += -Ddri3=false >> endif >> MESA3D_CONF_OPTS += \ >> - --enable-shared-glapi \ >> - --enable-driglx-direct \ >> - --with-dri-driverdir=/usr/lib/dri \ > > No need to specify this anymore? > > > Regards, > Arnout > >> - --with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) >> + -Dshared-glapi=true \ >> + -Dglx-direct=true \ >> + -Ddri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) >> endif >> >> ifeq ($(BR2_PACKAGE_MESA3D_VULKAN_DRIVER),) >> MESA3D_CONF_OPTS += \ >> - --without-vulkan-drivers >> + -Dvulkan-drivers= >> else >> MESA3D_DEPENDENCIES += xlib_libxshmfence >> MESA3D_CONF_OPTS += \ >> - --enable-dri3 \ >> - --with-vulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) >> + -Ddri3=true \ >> + -Dvulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) >> endif >> >> # APIs >> >> ifeq ($(BR2_PACKAGE_MESA3D_OSMESA),y) >> -MESA3D_CONF_OPTS += --enable-osmesa >> +MESA3D_CONF_OPTS += -Dosmesa=classic >> else >> -MESA3D_CONF_OPTS += --disable-osmesa >> +MESA3D_CONF_OPTS += -Dosmesa=none >> endif >> >> # Always enable OpenGL: >> # - it is needed for GLES (mesa3d's ./configure is a bit weird) >> -MESA3D_CONF_OPTS += --enable-opengl --enable-dri >> +MESA3D_CONF_OPTS += -Dopengl=true -Dglx=dri >> >> # libva and mesa3d have a circular dependency >> # we do not need libva support in mesa3d, therefore disable this option >> -MESA3D_CONF_OPTS += --disable-va >> +MESA3D_CONF_OPTS += -Dgallium-va=false >> >> # libGL is only provided for a full xorg stack >> ifeq ($(BR2_PACKAGE_XORG7),y) >> @@ -201,51 +189,51 @@ MESA3D_PLATFORMS += x11 >> endif >> >> MESA3D_CONF_OPTS += \ >> - --with-platforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) >> + -Dplatforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) >> >> ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_EGL),y) >> MESA3D_PROVIDES += libegl >> MESA3D_CONF_OPTS += \ >> - --enable-gbm \ >> - --enable-egl >> + -Dgbm=true \ >> + -Degl=true >> else >> MESA3D_CONF_OPTS += \ >> - --disable-egl >> + -Degl=true=false >> endif >> >> ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y) >> MESA3D_PROVIDES += libgles >> -MESA3D_CONF_OPTS += --enable-gles1 --enable-gles2 >> +MESA3D_CONF_OPTS += -Dgles1=true -Dgles2=true >> else >> -MESA3D_CONF_OPTS += --disable-gles1 --disable-gles2 >> +MESA3D_CONF_OPTS += -Dgles1=false -Dgles2=false >> endif >> >> ifeq ($(BR2_PACKAGE_XLIB_LIBXVMC),y) >> MESA3D_DEPENDENCIES += xlib_libXvMC >> -MESA3D_CONF_OPTS += --enable-xvmc >> +MESA3D_CONF_OPTS += -Dgallium-xvmc=true >> else >> -MESA3D_CONF_OPTS += --disable-xvmc >> +MESA3D_CONF_OPTS += -Dgallium-xvmc=false >> endif >> >> ifeq ($(BR2_PACKAGE_LIBUNWIND),y) >> -MESA3D_CONF_OPTS += --enable-libunwind >> +MESA3D_CONF_OPTS += -Dlibunwind=true >> MESA3D_DEPENDENCIES += libunwind >> else >> -MESA3D_CONF_OPTS += --disable-libunwind >> +MESA3D_CONF_OPTS += -Dlibunwind=false >> endif >> >> ifeq ($(BR2_PACKAGE_LIBVDPAU),y) >> MESA3D_DEPENDENCIES += libvdpau >> -MESA3D_CONF_OPTS += --enable-vdpau >> +MESA3D_CONF_OPTS += -Dgallium-vdpau=true >> else >> -MESA3D_CONF_OPTS += --disable-vdpau >> +MESA3D_CONF_OPTS += -Dgallium-vdpau=false >> endif >> >> ifeq ($(BR2_PACKAGE_LM_SENSORS),y) >> -MESA3D_CONF_OPTS += --enable-lmsensors >> +MESA3D_CONF_OPTS += -Dlmsensors=true >> MESA3D_DEPENDENCIES += lm-sensors >> else >> -MESA3D_CONF_OPTS += --disable-lmsensors >> +MESA3D_CONF_OPTS += -Dlmsensors=false >> endif >> >> -$(eval $(autotools-package)) >> +$(eval $(meson-package)) >> > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot >
diff --git a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch b/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch deleted file mode 100644 index 5135528795..0000000000 --- a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch +++ /dev/null @@ -1,51 +0,0 @@ -From ef96bac7cbbb11b98606864ead0f731dd5b71d5a Mon Sep 17 00:00:00 2001 -From: Gustavo Zacarias <gustavo@zacarias.com.ar> -Date: Thu, 17 Nov 2016 15:36:54 -0300 -Subject: [PATCH] configure.ac: invert order for wayland-scanner check - -When cross-compiling the .pc file might point to the wrong -wayland-scanner binary (target rather than host) resulting in a -non-executable and wrong scanner. -Try searching the PATH first, and if that fails fall back into -pkg-config. - -[Vincent: tweak patch for 17.1.1 version] - -Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> -Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> -[Romain: rebase on 18.1] -Signed-off-by: Romain Naour <romain.naour@gmail.com> -[Bernd rebase on 18.3] -Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> ---- - configure.ac | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/configure.ac b/configure.ac -index f1fbdcc6c7..dcf87e7dd6 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1841,17 +1841,16 @@ - fi - WAYLAND_PROTOCOLS_DATADIR=`$PKG_CONFIG --variable=pkgdatadir wayland-protocols` - -- PKG_CHECK_MODULES([WAYLAND_SCANNER], [wayland-scanner], -+ AC_PATH_PROG([WAYLAND_SCANNER], [wayland-scanner], [:]) -+ if test "x$WAYLAND_SCANNER" = x; then -+ PKG_CHECK_MODULES([WAYLAND_SCANNER], [wayland-scanner], - WAYLAND_SCANNER=`$PKG_CONFIG --variable=wayland_scanner wayland-scanner`, - WAYLAND_SCANNER='') -+ fi - PKG_CHECK_EXISTS([wayland-scanner >= 1.15], - AC_SUBST(SCANNER_ARG, 'private-code'), - AC_SUBST(SCANNER_ARG, 'code')) - -- if test "x$WAYLAND_SCANNER" = x; then -- AC_PATH_PROG([WAYLAND_SCANNER], [wayland-scanner], [:]) -- fi -- - if test "x$WAYLAND_SCANNER" = "x:"; then - AC_MSG_ERROR([wayland-scanner is needed to compile the wayland platform]) - fi --- -2.14.3 diff --git a/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch deleted file mode 100644 index 42ae826a36..0000000000 --- a/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 94bceeb621e36f3188c6246a763def8695526578 Mon Sep 17 00:00:00 2001 -From: Valentin Korenblit <valentinkorenblit@gmail.com> -Date: Sat, 20 Oct 2018 10:56:23 +0200 -Subject: [PATCH] Set proper value for LIBCLC_INCLUDEDIR - -LIBCLC_INCLUDEDIR is the location where mesa3d OpenCL implementation -will look for OpenCL "headers" on the target, when building the OpenCL -kernels. - -The value returned by pkg-config for includedir is relevant when -cross-compiling, on the build machine. But in this specific case, we -really need a value that is valid on the target. - -Those headers are installed by the libclc package in /usr/share so -that they are not removed by Buildroot target-finalize logic. - -Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com> ---- - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 864dcae..cc2390b 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -2429,7 +2429,7 @@ if test "x$enable_opencl" = xyes; then - PKG_CONFIG_PATH environment variable. - By default libclc.pc is installed to /usr/local/share/pkgconfig/]) - else -- LIBCLC_INCLUDEDIR=`$PKG_CONFIG --variable=includedir libclc` -+ LIBCLC_INCLUDEDIR="/usr/share" - LIBCLC_LIBEXECDIR=`$PKG_CONFIG --variable=libexecdir libclc` - AC_SUBST([LIBCLC_INCLUDEDIR]) - AC_SUBST([LIBCLC_LIBEXECDIR]) --- -2.7.4 - diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in index 3f44e94229..6070e5e039 100644 --- a/package/mesa3d/Config.in +++ b/package/mesa3d/Config.in @@ -129,7 +129,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600 select BR2_PACKAGE_LLVM_AMDGPU if BR2_PACKAGE_MESA3D_LLVM select BR2_PACKAGE_ELFUTILS if BR2_PACKAGE_MESA3D_LLVM select BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS if BR2_PACKAGE_MESA3D_LLVM - select BR2_PACKAGE_MESA3D_NEEDS_XA help Driver for ATI/AMD Radeon R600/R700/HD5000/HD6000 GPUs. @@ -151,7 +150,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI select BR2_PACKAGE_LLVM_AMDGPU select BR2_PACKAGE_ELFUTILS select BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS - select BR2_PACKAGE_MESA3D_NEEDS_XA help Driver for ATI/AMD Radeon HD7000/HD8000/Rx200 GPUs. @@ -184,7 +182,6 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4 select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER select BR2_PACKAGE_MESA3D_GALLIUM_KMSRO select BR2_PACKAGE_LIBDRM_VC4 - select BR2_PACKAGE_MESA3D_NEEDS_XA select BR2_PACKAGE_MESA3D_OPENGL_EGL help Driver for Broadcom VC4 (rpi2/3) GPUs. diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index 02c8a8a57a..67edab89af 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -21,31 +21,22 @@ MESA3D_PROVIDES = MESA3D_DEPENDENCIES = \ host-bison \ host-flex \ + host-python3-mako \ expat \ libdrm \ zlib -# Disable assembly usage. -MESA3D_CONF_OPTS = --disable-asm - -# autotools are deprecated in favour of meson, for now force autotools -MESA3D_CONF_OPTS += --enable-autotools - -# Disable static, otherwise configure will fail with: "Cannot enable both static -# and shared." -ifeq ($(BR2_SHARED_STATIC_LIBS),y) -MESA3D_CONF_OPTS += --disable-static -endif +MESA3D_CONF_OPTS = \ + -Dasm=false \ + -Dgallium-omx=disabled ifeq ($(BR2_PACKAGE_MESA3D_LLVM),y) MESA3D_DEPENDENCIES += host-llvm llvm -MESA3D_CONF_OPTS += \ - --with-llvm-prefix=$(STAGING_DIR)/usr \ - --enable-llvm-shared-libs \ - --enable-llvm +MESA3D_CONF_ENV += LLVM_CONFIG=$(STAGING_DIR)/usr/bin/llvm-config +MESA3D_CONF_OPTS += -Dllvm=true else # Avoid automatic search of llvm-config -MESA3D_CONF_OPTS += --disable-llvm +MESA3D_CONF_OPTS += -Dllvm=false endif # Disable opencl-icd: OpenCL lib will be named libOpenCL instead of @@ -53,11 +44,9 @@ endif ifeq ($(BR2_PACKAGE_MESA3D_OPENCL),y) MESA3D_PROVIDES += libopencl MESA3D_DEPENDENCIES += clang libclc -MESA3D_CONF_OPTS += --enable-opencl \ - --disable-opencl-icd \ - --with-clang-libdir=$(STAGING_DIR)/usr/lib +MESA3D_CONF_OPTS += -Dgallium-opencl=standalone else -MESA3D_CONF_OPTS += --disable-opencl +MESA3D_CONF_OPTS += -Dgallium-opencl=disabled endif ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS),y) @@ -82,17 +71,17 @@ MESA3D_DEPENDENCIES += \ xlib_libXxf86vm \ xorgproto \ libxcb -MESA3D_CONF_OPTS += --enable-glx --disable-mangling +MESA3D_CONF_OPTS += -Dglx=auto # quote from mesa3d configure "Building xa requires at least one non swrast gallium driver." ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_XA),y) -MESA3D_CONF_OPTS += --enable-xa +MESA3D_CONF_OPTS += -Dgallium-xa=true else -MESA3D_CONF_OPTS += --disable-xa +MESA3D_CONF_OPTS += -Dgallium-xa=false endif else MESA3D_CONF_OPTS += \ - --disable-glx \ - --disable-xa + -Dglx=disabled \ + -Dgallium-xa=false endif # Drivers @@ -112,63 +101,62 @@ MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST) += swrast MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I915) += i915 MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I965) += i965 MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU) += nouveau -MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += radeon +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += r100 # Vulkan Drivers MESA3D_VULKAN_DRIVERS-$(BR2_PACKAGE_MESA3D_VULKAN_DRIVER_INTEL) += intel ifeq ($(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER),) MESA3D_CONF_OPTS += \ - --without-gallium-drivers \ - --disable-gallium-extra-hud + -Dgallium-drivers= \ + -Dgallium-extra-hud=false else MESA3D_CONF_OPTS += \ - --enable-shared-glapi \ - --with-gallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ - --enable-gallium-extra-hud + -Dshared-glapi=true \ + -Dgallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ + -Dgallium-extra-hud=true endif ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),) MESA3D_CONF_OPTS += \ - --without-dri-drivers --disable-dri3 + -Ddri-drivers= -Ddri3=false else ifeq ($(BR2_PACKAGE_XLIB_LIBXSHMFENCE),y) MESA3D_DEPENDENCIES += xlib_libxshmfence -MESA3D_CONF_OPTS += --enable-dri3 +MESA3D_CONF_OPTS += -Ddri3=true else -MESA3D_CONF_OPTS += --disable-dri3 +MESA3D_CONF_OPTS += -Ddri3=false endif MESA3D_CONF_OPTS += \ - --enable-shared-glapi \ - --enable-driglx-direct \ - --with-dri-driverdir=/usr/lib/dri \ - --with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) + -Dshared-glapi=true \ + -Dglx-direct=true \ + -Ddri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) endif ifeq ($(BR2_PACKAGE_MESA3D_VULKAN_DRIVER),) MESA3D_CONF_OPTS += \ - --without-vulkan-drivers + -Dvulkan-drivers= else MESA3D_DEPENDENCIES += xlib_libxshmfence MESA3D_CONF_OPTS += \ - --enable-dri3 \ - --with-vulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) + -Ddri3=true \ + -Dvulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) endif # APIs ifeq ($(BR2_PACKAGE_MESA3D_OSMESA),y) -MESA3D_CONF_OPTS += --enable-osmesa +MESA3D_CONF_OPTS += -Dosmesa=classic else -MESA3D_CONF_OPTS += --disable-osmesa +MESA3D_CONF_OPTS += -Dosmesa=none endif # Always enable OpenGL: # - it is needed for GLES (mesa3d's ./configure is a bit weird) -MESA3D_CONF_OPTS += --enable-opengl --enable-dri +MESA3D_CONF_OPTS += -Dopengl=true -Dglx=dri # libva and mesa3d have a circular dependency # we do not need libva support in mesa3d, therefore disable this option -MESA3D_CONF_OPTS += --disable-va +MESA3D_CONF_OPTS += -Dgallium-va=false # libGL is only provided for a full xorg stack ifeq ($(BR2_PACKAGE_XORG7),y) @@ -201,51 +189,51 @@ MESA3D_PLATFORMS += x11 endif MESA3D_CONF_OPTS += \ - --with-platforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) + -Dplatforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_EGL),y) MESA3D_PROVIDES += libegl MESA3D_CONF_OPTS += \ - --enable-gbm \ - --enable-egl + -Dgbm=true \ + -Degl=true else MESA3D_CONF_OPTS += \ - --disable-egl + -Degl=true=false endif ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y) MESA3D_PROVIDES += libgles -MESA3D_CONF_OPTS += --enable-gles1 --enable-gles2 +MESA3D_CONF_OPTS += -Dgles1=true -Dgles2=true else -MESA3D_CONF_OPTS += --disable-gles1 --disable-gles2 +MESA3D_CONF_OPTS += -Dgles1=false -Dgles2=false endif ifeq ($(BR2_PACKAGE_XLIB_LIBXVMC),y) MESA3D_DEPENDENCIES += xlib_libXvMC -MESA3D_CONF_OPTS += --enable-xvmc +MESA3D_CONF_OPTS += -Dgallium-xvmc=true else -MESA3D_CONF_OPTS += --disable-xvmc +MESA3D_CONF_OPTS += -Dgallium-xvmc=false endif ifeq ($(BR2_PACKAGE_LIBUNWIND),y) -MESA3D_CONF_OPTS += --enable-libunwind +MESA3D_CONF_OPTS += -Dlibunwind=true MESA3D_DEPENDENCIES += libunwind else -MESA3D_CONF_OPTS += --disable-libunwind +MESA3D_CONF_OPTS += -Dlibunwind=false endif ifeq ($(BR2_PACKAGE_LIBVDPAU),y) MESA3D_DEPENDENCIES += libvdpau -MESA3D_CONF_OPTS += --enable-vdpau +MESA3D_CONF_OPTS += -Dgallium-vdpau=true else -MESA3D_CONF_OPTS += --disable-vdpau +MESA3D_CONF_OPTS += -Dgallium-vdpau=false endif ifeq ($(BR2_PACKAGE_LM_SENSORS),y) -MESA3D_CONF_OPTS += --enable-lmsensors +MESA3D_CONF_OPTS += -Dlmsensors=true MESA3D_DEPENDENCIES += lm-sensors else -MESA3D_CONF_OPTS += --disable-lmsensors +MESA3D_CONF_OPTS += -Dlmsensors=false endif -$(eval $(autotools-package)) +$(eval $(meson-package))
Remove all patches related to autotools. Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> --- This patch is only slightly tested, expect breakages ;) ...vert-order-for-wayland-scanner-check.patch | 51 --------- .../mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch | 37 ------ package/mesa3d/Config.in | 3 - package/mesa3d/mesa3d.mk | 108 ++++++++---------- 4 files changed, 48 insertions(+), 151 deletions(-) delete mode 100644 package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch delete mode 100644 package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch