@@ -258,6 +258,12 @@ config TEGRA210_QSPI
be used to access SPI chips on platforms embedding this
NVIDIA Tegra210 IP core.
+config TI_QSPI
+ bool "TI QSPI driver"
+ help
+ Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
+ This driver support spi flash single, quad and memory reads.
+
config XILINX_SPI
bool "Xilinx SPI driver"
help
@@ -345,12 +351,6 @@ config SH_QSPI
Enable the Renesas Quad SPI controller driver. This driver can be
used on Renesas SoCs.
-config TI_QSPI
- bool "TI QSPI driver"
- help
- Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
- This driver support spi flash single, quad and memory reads.
-
config KIRKWOOD_SPI
bool "Marvell Kirkwood SPI Driver"
help
@@ -9,6 +9,7 @@ obj-y += spi-uclass.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
obj-$(CONFIG_SPI_MEM) += spi-mem.o
+obj-$(CONFIG_TI_QSPI) += ti_qspi.o
else
obj-y += spi.o
obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
@@ -56,7 +57,6 @@ obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o
-obj-$(CONFIG_TI_QSPI) += ti_qspi.o
obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o
@@ -52,9 +52,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define MM_SWITCH 0x01
#define MEM_CS(cs) ((cs + 1) << 8)
#define MEM_CS_UNSELECT 0xfffff8ff
-#define MMAP_START_ADDR_DRA 0x5c000000
-#define MMAP_START_ADDR_AM43x 0x30000000
-#define CORE_CTRL_IO 0x4a002558
#define QSPI_CMD_READ (0x3 << 0)
#define QSPI_CMD_READ_DUAL (0x6b << 0)
@@ -98,13 +95,9 @@ struct ti_qspi_regs {
/* ti qspi priv */
struct ti_qspi_priv {
-#ifndef CONFIG_DM_SPI
- struct spi_slave slave;
-#else
void *memory_map;
uint max_hz;
u32 num_cs;
-#endif
struct ti_qspi_regs *base;
void *ctrl_mod_mmap;
ulong fclk;
@@ -113,8 +106,9 @@ struct ti_qspi_priv {
u32 dc;
};
-static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
+static int ti_qspi_set_speed(struct udevice *bus, uint hz)
{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
uint clk_div;
if (!hz)
@@ -133,6 +127,8 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
&priv->base->clk_ctrl);
/* enable SCLK and program the clk divider */
writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
+
+ return 0;
}
static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
@@ -142,38 +138,6 @@ static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
readl(&priv->base->cmd);
}
-static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
-{
- priv->dc = 0;
- if (mode & SPI_CPHA)
- priv->dc |= QSPI_CKPHA(0);
- if (mode & SPI_CPOL)
- priv->dc |= QSPI_CKPOL(0);
- if (mode & SPI_CS_HIGH)
- priv->dc |= QSPI_CSPOL(0);
-
- return 0;
-}
-
-static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
-{
- writel(priv->dc, &priv->base->dc);
- writel(0, &priv->base->cmd);
- writel(0, &priv->base->data);
-
- priv->dc <<= cs * 8;
- writel(priv->dc, &priv->base->dc);
-
- return 0;
-}
-
-static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
-{
- writel(0, &priv->base->dc);
- writel(0, &priv->base->cmd);
- writel(0, &priv->base->data);
-}
-
static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
{
u32 val;
@@ -186,15 +150,26 @@ static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
writel(val, ctrl_mod_mmap);
}
-static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags,
- u32 cs)
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
+ struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
uint words = bitlen >> 3; /* fixed 8-bit word length */
const uchar *txp = dout;
uchar *rxp = din;
uint status;
int timeout;
+ unsigned int cs = slave->cs;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ if (cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
+ }
/* Setup mmap flags */
if (flags & SPI_XFER_MMAP) {
@@ -316,126 +291,6 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len)
}
#endif
-#ifndef CONFIG_DM_SPI
-
-static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
-{
- return container_of(slave, struct ti_qspi_priv, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* CS handled in xfer */
- return;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- ti_qspi_cs_deactivate(priv);
-}
-
-void spi_init(void)
-{
- /* nothing to do */
-}
-
-static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
-{
- u32 memval = 0;
-
-#ifdef CONFIG_QSPI_QUAD_SUPPORT
- struct spi_slave *slave = &priv->slave;
- memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_8_BITS |
- QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS);
- slave->mode |= SPI_RX_QUAD;
-#else
- memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
- QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS;
-#endif
-
- writel(memval, &priv->base->setup0);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct ti_qspi_priv *priv;
-
-#ifdef CONFIG_AM43XX
- gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
- gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
-#endif
-
- priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
- if (!priv) {
- printf("SPI_error: Fail to allocate ti_qspi_priv\n");
- return NULL;
- }
-
- priv->base = (struct ti_qspi_regs *)QSPI_BASE;
- priv->mode = mode;
-#if defined(CONFIG_DRA7XX)
- priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
- priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
- priv->fclk = QSPI_DRA7XX_FCLK;
-#else
- priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
- priv->fclk = QSPI_FCLK;
-#endif
-
- ti_spi_set_speed(priv, max_hz);
-
-#ifdef CONFIG_TI_SPI_MMAP
- ti_spi_setup_spi_register(priv);
-#endif
-
- return &priv->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_set_mode(priv, priv->mode);
- return __ti_qspi_claim_bus(priv, priv->slave.cs);
-}
-void spi_release_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_release_bus(priv);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
- priv->slave.bus, priv->slave.cs, bitlen, flags);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
-}
-
-#else /* CONFIG_DM_SPI */
-
static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
struct spi_slave *slave,
bool enable)
@@ -472,22 +327,21 @@ static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
writel(memval, &priv->base->setup0);
}
-
-static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
+static int ti_qspi_set_mode(struct udevice *bus, uint mode)
{
struct ti_qspi_priv *priv = dev_get_priv(bus);
- ti_spi_set_speed(priv, max_hz);
+ priv->dc = 0;
+ if (mode & SPI_CPHA)
+ priv->dc |= QSPI_CKPHA(0);
+ if (mode & SPI_CPOL)
+ priv->dc |= QSPI_CKPOL(0);
+ if (mode & SPI_CS_HIGH)
+ priv->dc |= QSPI_CSPOL(0);
return 0;
}
-static int ti_qspi_set_mode(struct udevice *bus, uint mode)
-{
- struct ti_qspi_priv *priv = dev_get_priv(bus);
- return __ti_qspi_set_mode(priv, mode);
-}
-
static int ti_qspi_claim_bus(struct udevice *dev)
{
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
@@ -505,7 +359,14 @@ static int ti_qspi_claim_bus(struct udevice *dev)
__ti_qspi_setup_memorymap(priv, slave, true);
- return __ti_qspi_claim_bus(priv, slave_plat->cs);
+ writel(priv->dc, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
+
+ priv->dc <<= slave_plat->cs * 8;
+ writel(priv->dc, &priv->base->dc);
+
+ return 0;
}
static int ti_qspi_release_bus(struct udevice *dev)
@@ -518,27 +379,12 @@ static int ti_qspi_release_bus(struct udevice *dev)
priv = dev_get_priv(bus);
__ti_qspi_setup_memorymap(priv, slave, false);
- __ti_qspi_release_bus(priv);
-
- return 0;
-}
-static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
- struct ti_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- if (slave->cs > priv->num_cs) {
- debug("invalid qspi chip select\n");
- return -EINVAL;
- }
+ writel(0, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
+ return 0;
}
static int ti_qspi_probe(struct udevice *bus)
@@ -648,4 +494,3 @@ U_BOOT_DRIVER(ti_qspi) = {
.probe = ti_qspi_probe,
.child_pre_probe = ti_qspi_child_pre_probe,
};
-#endif /* CONFIG_DM_SPI */
@@ -122,11 +122,9 @@
#endif
/* SPI */
-#define CONFIG_TI_SPI_MMAP
#define CONFIG_QSPI_SEL_GPIO 48
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-#define CONFIG_QSPI_QUAD_SUPPORT
#define CONFIG_TI_EDMA3
#ifndef CONFIG_SPL_BUILD
@@ -85,9 +85,7 @@
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
/* SPI */
-#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED 76800000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_QSPI_QUAD_SUPPORT
#endif /* __CONFIG_AM57XX_EVM_H */
@@ -26,7 +26,6 @@
#define CONFIG_SYS_SPD_BUS_NUM 3
/* SPI Flash support */
-#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
@@ -54,7 +54,6 @@
#define CONFIG_AM437X_USB2PHY2_HOST
/* SPI Flash support */
-#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
@@ -73,10 +73,8 @@
#define CONFIG_PHY_TI
/* SPI */
-#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED 76800000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_QSPI_QUAD_SUPPORT
/*
* Default to using SPI for environment, etc.
@@ -1565,7 +1565,6 @@ CONFIG_QE
CONFIG_QEMU_MIPS
CONFIG_QIXIS_I2C_ACCESS
CONFIG_QSPI
-CONFIG_QSPI_QUAD_SUPPORT
CONFIG_QSPI_SEL_GPIO
CONFIG_QUOTA
CONFIG_R7780MP
@@ -4418,7 +4417,6 @@ CONFIG_TIMESTAMP
CONFIG_TIZEN
CONFIG_TI_KEYSTONE_SERDES
CONFIG_TI_KSNAV
-CONFIG_TI_SPI_MMAP
CONFIG_TMU_TIMER
CONFIG_TPL_PAD_TO
CONFIG_TPM_TIS_BASE_ADDRESS
Now that all boards using TI QSPI have moved to DM and DT, drop non DM code completely. Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/spi/Kconfig | 12 +- drivers/spi/Makefile | 2 +- drivers/spi/ti_qspi.c | 231 ++++++--------------------------- include/configs/am43xx_evm.h | 2 - include/configs/am57xx_evm.h | 2 - include/configs/cl-som-am57x.h | 1 - include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 2 - scripts/config_whitelist.txt | 2 - 9 files changed, 45 insertions(+), 210 deletions(-)