diff mbox series

[net-next,1/3] dt-bindings: net: dsa: document additional Microchip KSZ9477 family switches

Message ID 1551224265-9304-2-git-send-email-Tristram.Ha@microchip.com
State Changes Requested
Delegated to: David Miller
Headers show
Series net: dsa: microchip: add KSZ9893 switch support | expand

Commit Message

Tristram.Ha@microchip.com Feb. 26, 2019, 11:37 p.m. UTC 
From: Tristram Ha <Tristram.Ha@microchip.com>

Document additional Microchip KSZ9477 family switches.

Show how KSZ8565 switch should be configured as the host port is port 7
instead of port 5.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
---
 Documentation/devicetree/bindings/net/dsa/ksz.txt | 43 +++++++++++++++++++++++
 1 file changed, 43 insertions(+)

Comments

Andrew Lunn Feb. 27, 2019, 12:41 p.m. UTC | #1 
On Tue, Feb 26, 2019 at 03:37:43PM -0800, Tristram.Ha@microchip.com wrote:
> +				port@3 {
> +					reg = <3>;
> +					label = "lan4";
> +				};
> +				port@4 {
> +					reg = <6>;

Hi Tristram

The number after the @ must be the same as the register. So this needs
to be port@6.

   Andrew

> +					label = "cpu";
> +					ethernet = <&eth0>;
> +					fixed-link {
> +						speed = <1000>;
> +						full-duplex;
> +					};
> +				};
> +			};
> +		};
>  	};
> -- 
> 1.9.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index 8d58c2a..b5fec1f 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -7,6 +7,11 @@  Required properties:
   of the following:
   - "microchip,ksz9477"
   - "microchip,ksz9897"
+  - "microchip,ksz9896"
+  - "microchip,ksz9567"
+  - "microchip,ksz8565"
+  - "microchip,ksz9893"
+  - "microchip,ksz9563"
 
 Optional properties:
 
@@ -73,4 +78,42 @@  Ethernet switch connected via SPI to the host, CPU port wired to eth0:
 				};
 			};
 		};
+		ksz8565: ksz8565@0 {
+			compatible = "microchip,ksz8565";
+			reg = <0>;
+
+			spi-max-frequency = <44000000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				port@4 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
 	};