| Message ID | 20190211045059.11821-1-jitao.shi@mediatek.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/mediatek: add mt8183 dpi support | expand |
Hi, Jitao: On Mon, 2019-02-11 at 12:50 +0800, Jitao Shi wrote: > MT8183 sample on rising and falling edge. It can reduce half data io. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index 62a9d47df948..610c23334047 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -117,6 +117,7 @@ struct mtk_dpi_conf { > unsigned int (*cal_factor)(int clock); > u32 reg_h_fre_con; > bool edge_sel_en; > + bool dual_edge; > }; > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > } > > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) > +{ > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > + DDR_EN | DDR_4PHASE); > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > +} All these register exist in MT8173, if you do the same setting in MT8173, could it also sample on rising edge and falling edge? Regards, CK > + > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > enum mtk_dpi_out_color_format format) > { > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > mtk_dpi_config_color_format(dpi, dpi->color_format); > mtk_dpi_config_2n_h_fre(dpi); > mtk_dpi_config_disable_edge(dpi); > + if (dpi->conf->dual_edge) > + mtk_dpi_enable_dual_edge(dpi); > mtk_dpi_sw_reset(dpi, false); > > return 0; > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) > return 2; > } > > +static unsigned int mt8183_calculate_factor(int clock) > +{ > + if (clock <= 27000) > + return 8; > + else if (clock <= 167000) > + return 4; > + else > + return 2; > +} > + > static const struct mtk_dpi_conf mt8173_conf = { > .cal_factor = mt8173_calculate_factor, > .reg_h_fre_con = 0xe0, > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { > .edge_sel_en = true, > }; > > +static const struct mtk_dpi_conf mt8183_conf = { > + .cal_factor = mt8183_calculate_factor, > + .reg_h_fre_con = 0xe0, > + .dual_edge = true, > +}; > + > static int mtk_dpi_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { > { .compatible = "mediatek,mt8173-dpi", > .data = &mt8173_conf, > }, > + { .compatible = "mediatek,mt8183-dpi", > + .data = &mt8183_conf, > + }, > { }, > }; >
On Mon, Feb 11, 2019 at 12:50:59PM +0800, Jitao Shi wrote: > MT8183 sample on rising and falling edge. It can reduce half data io. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index 62a9d47df948..610c23334047 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -117,6 +117,7 @@ struct mtk_dpi_conf { > unsigned int (*cal_factor)(int clock); > u32 reg_h_fre_con; > bool edge_sel_en; > + bool dual_edge; > }; > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > } > > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) > +{ > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > + DDR_EN | DDR_4PHASE); > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > +} > + > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > enum mtk_dpi_out_color_format format) > { > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > mtk_dpi_config_color_format(dpi, dpi->color_format); > mtk_dpi_config_2n_h_fre(dpi); > mtk_dpi_config_disable_edge(dpi); > + if (dpi->conf->dual_edge) > + mtk_dpi_enable_dual_edge(dpi); > mtk_dpi_sw_reset(dpi, false); > > return 0; > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) > return 2; > } > > +static unsigned int mt8183_calculate_factor(int clock) > +{ > + if (clock <= 27000) > + return 8; > + else if (clock <= 167000) > + return 4; > + else > + return 2; > +} > + > static const struct mtk_dpi_conf mt8173_conf = { > .cal_factor = mt8173_calculate_factor, > .reg_h_fre_con = 0xe0, > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { > .edge_sel_en = true, > }; > > +static const struct mtk_dpi_conf mt8183_conf = { > + .cal_factor = mt8183_calculate_factor, > + .reg_h_fre_con = 0xe0, > + .dual_edge = true, > +}; > + > static int mtk_dpi_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { > { .compatible = "mediatek,mt8173-dpi", > .data = &mt8173_conf, > }, > + { .compatible = "mediatek,mt8183-dpi", Do you need to add this compatible value to the dt binding? If you can do as CK suggested, maybe you don't need this at all (and mt8183 can use the mt8173 compatible string in the dt). Sean > + .data = &mt8183_conf, > + }, > { }, > }; > > -- > 2.12.5 >
On Thu, 2019-02-14 at 15:41 -0500, Sean Paul wrote: > On Mon, Feb 11, 2019 at 12:50:59PM +0800, Jitao Shi wrote: > > MT8183 sample on rising and falling edge. It can reduce half data io. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index 62a9d47df948..610c23334047 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -117,6 +117,7 @@ struct mtk_dpi_conf { > > unsigned int (*cal_factor)(int clock); > > u32 reg_h_fre_con; > > bool edge_sel_en; > > + bool dual_edge; > > }; > > > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > > } > > > > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) > > +{ > > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > > + DDR_EN | DDR_4PHASE); > > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > > +} > > + > > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > > enum mtk_dpi_out_color_format format) > > { > > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > mtk_dpi_config_color_format(dpi, dpi->color_format); > > mtk_dpi_config_2n_h_fre(dpi); > > mtk_dpi_config_disable_edge(dpi); > > + if (dpi->conf->dual_edge) > > + mtk_dpi_enable_dual_edge(dpi); > > mtk_dpi_sw_reset(dpi, false); > > > > return 0; > > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) > > return 2; > > } > > > > +static unsigned int mt8183_calculate_factor(int clock) > > +{ > > + if (clock <= 27000) > > + return 8; > > + else if (clock <= 167000) > > + return 4; > > + else > > + return 2; > > +} > > + > > static const struct mtk_dpi_conf mt8173_conf = { > > .cal_factor = mt8173_calculate_factor, > > .reg_h_fre_con = 0xe0, > > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { > > .edge_sel_en = true, > > }; > > > > +static const struct mtk_dpi_conf mt8183_conf = { > > + .cal_factor = mt8183_calculate_factor, > > + .reg_h_fre_con = 0xe0, > > + .dual_edge = true, > > +}; > > + > > static int mtk_dpi_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { > > { .compatible = "mediatek,mt8173-dpi", > > .data = &mt8173_conf, > > }, > > + { .compatible = "mediatek,mt8183-dpi", > > Do you need to add this compatible value to the dt binding? If you can do as CK > suggested, maybe you don't need this at all (and mt8183 can use the mt8173 > compatible string in the dt). > > Sean > Yes, CK is right. I'll move it to mt8173. > > + .data = &mt8183_conf, > > + }, > > { }, > > }; > > > > -- > > 2.12.5 > > >
On Fri, 2019-02-15 at 00:13 +0800, CK Hu wrote: > Hi, Jitao: > > On Mon, 2019-02-11 at 12:50 +0800, Jitao Shi wrote: > > MT8183 sample on rising and falling edge. It can reduce half data io. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index 62a9d47df948..610c23334047 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -117,6 +117,7 @@ struct mtk_dpi_conf { > > unsigned int (*cal_factor)(int clock); > > u32 reg_h_fre_con; > > bool edge_sel_en; > > + bool dual_edge; > > }; > > > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > > } > > > > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) > > +{ > > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > > + DDR_EN | DDR_4PHASE); > > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > > +} > > All these register exist in MT8173, if you do the same setting in > MT8173, could it also sample on rising edge and falling edge? > > Regards, > CK > I'll fix is next version. Thanks for your review. Best Regards. Jitao > > + > > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > > enum mtk_dpi_out_color_format format) > > { > > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > mtk_dpi_config_color_format(dpi, dpi->color_format); > > mtk_dpi_config_2n_h_fre(dpi); > > mtk_dpi_config_disable_edge(dpi); > > + if (dpi->conf->dual_edge) > > + mtk_dpi_enable_dual_edge(dpi); > > mtk_dpi_sw_reset(dpi, false); > > > > return 0; > > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) > > return 2; > > } > > > > +static unsigned int mt8183_calculate_factor(int clock) > > +{ > > + if (clock <= 27000) > > + return 8; > > + else if (clock <= 167000) > > + return 4; > > + else > > + return 2; > > +} > > + > > static const struct mtk_dpi_conf mt8173_conf = { > > .cal_factor = mt8173_calculate_factor, > > .reg_h_fre_con = 0xe0, > > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { > > .edge_sel_en = true, > > }; > > > > +static const struct mtk_dpi_conf mt8183_conf = { > > + .cal_factor = mt8183_calculate_factor, > > + .reg_h_fre_con = 0xe0, > > + .dual_edge = true, > > +}; > > + > > static int mtk_dpi_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { > > { .compatible = "mediatek,mt8173-dpi", > > .data = &mt8173_conf, > > }, > > + { .compatible = "mediatek,mt8183-dpi", > > + .data = &mt8183_conf, > > + }, > > { }, > > }; > > > >
On Fri, 2019-02-15 at 00:13 +0800, CK Hu wrote: > Hi, Jitao: > > On Mon, 2019-02-11 at 12:50 +0800, Jitao Shi wrote: > > MT8183 sample on rising and falling edge. It can reduce half data io. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index 62a9d47df948..610c23334047 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -117,6 +117,7 @@ struct mtk_dpi_conf { > > unsigned int (*cal_factor)(int clock); > > u32 reg_h_fre_con; > > bool edge_sel_en; > > + bool dual_edge; > > }; > > > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > > } > > > > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) > > +{ > > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > > + DDR_EN | DDR_4PHASE); > > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > > +} > > All these register exist in MT8173, if you do the same setting in > MT8173, could it also sample on rising edge and falling edge? > > Regards, > CK Hi CK, MT8173 has those registers. But the hw function is removed. So MT8173 doesn't support DPI dual edge sample. Best Regards Jitao > > > + > > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > > enum mtk_dpi_out_color_format format) > > { > > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > mtk_dpi_config_color_format(dpi, dpi->color_format); > > mtk_dpi_config_2n_h_fre(dpi); > > mtk_dpi_config_disable_edge(dpi); > > + if (dpi->conf->dual_edge) > > + mtk_dpi_enable_dual_edge(dpi); > > mtk_dpi_sw_reset(dpi, false); > > > > return 0; > > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) > > return 2; > > } > > > > +static unsigned int mt8183_calculate_factor(int clock) > > +{ > > + if (clock <= 27000) > > + return 8; > > + else if (clock <= 167000) > > + return 4; > > + else > > + return 2; > > +} > > + > > static const struct mtk_dpi_conf mt8173_conf = { > > .cal_factor = mt8173_calculate_factor, > > .reg_h_fre_con = 0xe0, > > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { > > .edge_sel_en = true, > > }; > > > > +static const struct mtk_dpi_conf mt8183_conf = { > > + .cal_factor = mt8183_calculate_factor, > > + .reg_h_fre_con = 0xe0, > > + .dual_edge = true, > > +}; > > + > > static int mtk_dpi_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { > > { .compatible = "mediatek,mt8173-dpi", > > .data = &mt8173_conf, > > }, > > + { .compatible = "mediatek,mt8183-dpi", > > + .data = &mt8183_conf, > > + }, > > { }, > > }; > > > >
Hi, Jitao: On Tue, 2019-02-19 at 09:53 +0800, Jitao Shi wrote: > On Fri, 2019-02-15 at 00:13 +0800, CK Hu wrote: > > Hi, Jitao: > > > > On Mon, 2019-02-11 at 12:50 +0800, Jitao Shi wrote: > > > MT8183 sample on rising and falling edge. It can reduce half data io. > > > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > > --- > > > drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ > > > 1 file changed, 29 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > > index 62a9d47df948..610c23334047 100644 > > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > > @@ -117,6 +117,7 @@ struct mtk_dpi_conf { > > > unsigned int (*cal_factor)(int clock); > > > u32 reg_h_fre_con; > > > bool edge_sel_en; > > > + bool dual_edge; > > > }; > > > > > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > > > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > > > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > > > } > > > > > > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) > > > +{ > > > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > > > + DDR_EN | DDR_4PHASE); > > > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > > > +} > > > > All these register exist in MT8173, if you do the same setting in > > MT8173, could it also sample on rising edge and falling edge? > > > > Regards, > > CK > > Hi CK, > > MT8173 has those registers. But the hw function is removed. > So MT8173 doesn't support DPI dual edge sample. OK, please add this information in commit message. Regards, CK > > Best Regards > Jitao > > > > > > + > > > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > > > enum mtk_dpi_out_color_format format) > > > { > > > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > > mtk_dpi_config_color_format(dpi, dpi->color_format); > > > mtk_dpi_config_2n_h_fre(dpi); > > > mtk_dpi_config_disable_edge(dpi); > > > + if (dpi->conf->dual_edge) > > > + mtk_dpi_enable_dual_edge(dpi); > > > mtk_dpi_sw_reset(dpi, false); > > > > > > return 0; > > > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) > > > return 2; > > > } > > > > > > +static unsigned int mt8183_calculate_factor(int clock) > > > +{ > > > + if (clock <= 27000) > > > + return 8; > > > + else if (clock <= 167000) > > > + return 4; > > > + else > > > + return 2; > > > +} > > > + > > > static const struct mtk_dpi_conf mt8173_conf = { > > > .cal_factor = mt8173_calculate_factor, > > > .reg_h_fre_con = 0xe0, > > > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { > > > .edge_sel_en = true, > > > }; > > > > > > +static const struct mtk_dpi_conf mt8183_conf = { > > > + .cal_factor = mt8183_calculate_factor, > > > + .reg_h_fre_con = 0xe0, > > > + .dual_edge = true, > > > +}; > > > + > > > static int mtk_dpi_probe(struct platform_device *pdev) > > > { > > > struct device *dev = &pdev->dev; > > > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { > > > { .compatible = "mediatek,mt8173-dpi", > > > .data = &mt8173_conf, > > > }, > > > + { .compatible = "mediatek,mt8183-dpi", > > > + .data = &mt8183_conf, > > > + }, > > > { }, > > > }; > > > > > > > > >
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index 62a9d47df948..610c23334047 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -117,6 +117,7 @@ struct mtk_dpi_conf { unsigned int (*cal_factor)(int clock); u32 reg_h_fre_con; bool edge_sel_en; + bool dual_edge; }; static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); } +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi) +{ + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, + DDR_EN | DDR_4PHASE); + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); +} + static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, enum mtk_dpi_out_color_format format) { @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, mtk_dpi_config_color_format(dpi, dpi->color_format); mtk_dpi_config_2n_h_fre(dpi); mtk_dpi_config_disable_edge(dpi); + if (dpi->conf->dual_edge) + mtk_dpi_enable_dual_edge(dpi); mtk_dpi_sw_reset(dpi, false); return 0; @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock) return 2; } +static unsigned int mt8183_calculate_factor(int clock) +{ + if (clock <= 27000) + return 8; + else if (clock <= 167000) + return 4; + else + return 2; +} + static const struct mtk_dpi_conf mt8173_conf = { .cal_factor = mt8173_calculate_factor, .reg_h_fre_con = 0xe0, @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = { .edge_sel_en = true, }; +static const struct mtk_dpi_conf mt8183_conf = { + .cal_factor = mt8183_calculate_factor, + .reg_h_fre_con = 0xe0, + .dual_edge = true, +}; + static int mtk_dpi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = { { .compatible = "mediatek,mt8173-dpi", .data = &mt8173_conf, }, + { .compatible = "mediatek,mt8183-dpi", + .data = &mt8183_conf, + }, { }, };
MT8183 sample on rising and falling edge. It can reduce half data io. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)