Message ID | 1546839327-19845-1-git-send-email-ye.li@nxp.com |
---|---|
State | Rejected |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | [U-Boot] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array | expand |
+ Vignesh On Mon, Jan 7, 2019 at 11:05 AM Ye Li <ye.li@nxp.com> wrote: > > On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters > and IDs to flash parameter array. Otherwise, the flash probe will fails. > > Signed-off-by: Ye Li <ye.li@nxp.com> > --- > drivers/mtd/spi/spi_flash_ids.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c > index ad0a0c8..17f9893 100644 > --- a/drivers/mtd/spi/spi_flash_ids.c > +++ b/drivers/mtd/spi/spi_flash_ids.c > @@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = { > {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, > {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, > {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, > + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) }, Look like this would also support WR_QPP, how about updating the same?
On 14/02/19 10:39 PM, Jagan Teki wrote: > + Vignesh > > On Mon, Jan 7, 2019 at 11:05 AM Ye Li <ye.li@nxp.com> wrote: >> >> On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters >> and IDs to flash parameter array. Otherwise, the flash probe will fails. >> >> Signed-off-by: Ye Li <ye.li@nxp.com> >> --- >> drivers/mtd/spi/spi_flash_ids.c | 1 + This file no longer exists after recent SPI NOR migration. Could you rebase on the latest? The capabilities flags are now same as kernel. >> 1 file changed, 1 insertion(+) >> >> diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c >> index ad0a0c8..17f9893 100644 >> --- a/drivers/mtd/spi/spi_flash_ids.c >> +++ b/drivers/mtd/spi/spi_flash_ids.c >> @@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = { >> {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, >> {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, >> {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, >> + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) }, > > Look like this would also support WR_QPP, how about updating the same? >
diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c index ad0a0c8..17f9893 100644 --- a/drivers/mtd/spi/spi_flash_ids.c +++ b/drivers/mtd/spi/spi_flash_ids.c @@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = { {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) }, #endif #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ {"s25fl008a", INFO(0x010213, 0x0, 64 * 1024, 16, 0) },
On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails. Signed-off-by: Ye Li <ye.li@nxp.com> --- drivers/mtd/spi/spi_flash_ids.c | 1 + 1 file changed, 1 insertion(+)