Message ID | 1547708191-8721-1-git-send-email-wangzqbj@inspur.com |
---|---|
State | Accepted, archived |
Headers | show |
Series | ARM:dts:aspeed Add Inspur on5263m5 BMC | expand |
On 2/12/19, 1:58 PM, "Linux-aspeed on behalf of John Wang" <linux-aspeed-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of wangzqbj@inspur.com> wrote:
Add initial version of device tree file for on5263m5 ast2500bmc
Signed-off-by: John Wang <wangzqbj@inspur.com>
---
arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 146 +++++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 0000000..064ae30
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "ON5263M5 BMC";
+ compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278@11 {
+ compatible = "adi,adm1278";
+ reg = <0x11>;
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
This pinctrl definition is not required as it is already defined in aspeed-g5.dtsi.
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+};
+
+&adc {
+ status = "okay";
+};
--
2.7.4
On Wed, Feb 13, 2019 at 6:11 AM Vijay Khemka <vijaykhemka@fb.com> wrote: > > > > On 2/12/19, 1:58 PM, "Linux-aspeed on behalf of John Wang" <linux-aspeed-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of wangzqbj@inspur.com> wrote: > > Add initial version of device tree file for on5263m5 ast2500bmc > > Signed-off-by: John Wang <wangzqbj@inspur.com> > --- > arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 146 +++++++++++++++++++++++ > 1 file changed, 146 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts > > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts > new file mode 100644 > index 0000000..064ae30 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts > @@ -0,0 +1,146 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018 Inspur Corporation > +/dts-v1/; > + > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "ON5263M5 BMC"; > + compatible = "inspur,on5263m5-bmc", "aspeed,ast2500"; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "earlyprintk"; > + }; > + > + memory { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + vga_memory: framebuffer@9f000000 { > + no-map; > + reg = <0x9f000000 0x01000000>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + bmc_alive { > + label = "bmc_alive"; > + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; > + linux,default-trigger = "timer"; > + }; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, > + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; > + }; > + > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > +#include "openbmc-flash-layout.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "pnor"; > + }; > +}; > + > +&uart5 { > + status = "okay"; > +}; > + > +&mac0 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii1_default>; > + use-ncsi; > +}; > + > +&mac1 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > +}; > + > +&i2c6 { > + status = "okay"; > + > + tmp421@4e { > + compatible = "ti,tmp421"; > + reg = <0x4e>; > + }; > + > + tmp112@48 { > + compatible = "ti,tmp112"; > + reg = <0x48>; > + }; > + > + eeprom@54 { > + compatible = "atmel,24c64"; > + reg = <0x54>; > + pagesize = <32>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + > + adm1278@11 { > + compatible = "adi,adm1278"; > + reg = <0x11>; > + }; > +}; > + > +&gfx { > + status = "okay"; > +}; > + > +&pinctrl { > + aspeed,external-nodes = <&gfx &lhc>; > +}; > This pinctrl definition is not required as it is already defined in aspeed-g5.dtsi. Thanks,Vijay. Next patch,I would drop the definition. > + > +&pwm_tacho { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; > + > + fan@0 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; > + }; > + > + fan@1 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; > + }; > +}; > + > +&adc { > + status = "okay"; > +}; > -- > 2.7.4 > > >
On Wed, 13 Feb 2019 at 08:40, Vijay Khemka <vijaykhemka@fb.com> wrote: > On 2/12/19, 1:58 PM, "Linux-aspeed on behalf of John Wang" <linux-aspeed-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of wangzqbj@inspur.com> wrote: > > Add initial version of device tree file for on5263m5 ast2500bmc > > Signed-off-by: John Wang <wangzqbj@inspur.com> > --- > arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 146 +++++++++++++++++++++++ > 1 file changed, 146 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts > +&pinctrl { > + aspeed,external-nodes = <&gfx &lhc>; > +}; > This pinctrl definition is not required as it is already defined in aspeed-g5.dtsi. I've already applied the patch and sent the pull request. Please follow up with a patch to clean this up. Cheers, Joel
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts new file mode 100644 index 0000000..064ae30 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Inspur Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "ON5263M5 BMC"; + compatible = "inspur,on5263m5-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c6 { + status = "okay"; + + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; +}; + +&adc { + status = "okay"; +};
Add initial version of device tree file for on5263m5 ast2500bmc Signed-off-by: John Wang <wangzqbj@inspur.com> --- arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 146 +++++++++++++++++++++++ 1 file changed, 146 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts