diff mbox series

[v2,07/15] ndings: clock: milbeaut: add Milbeaut clock description

Message ID 1549628823-31388-1-git-send-email-sugaya.taichi@socionext.com
State Changes Requested, archived
Headers show
Series Add basic support for Socionext Milbeaut M10V SoC | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Sugaya Taichi Feb. 8, 2019, 12:27 p.m. UTC
Add DT bindings document for Milbeaut clock.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
---
 .../devicetree/bindings/clock/milbeaut-clock.txt   | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/milbeaut-clock.txt

Comments

Stephen Boyd Feb. 13, 2019, 5:55 p.m. UTC | #1
The subject seems to have been cut off? "ndings"?

Quoting Sugaya Taichi (2019-02-08 04:27:03)
> diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.txt b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
> new file mode 100644
> index 0000000..bcfc5df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
> @@ -0,0 +1,49 @@
> +Milbeaut SoCs Clock Controller Binding
> +----------------------------------------
> +Milbeaut SoCs Clock controller is an integrated clock controller, which
> +generates and supplies to all modules.
> +
> +This binding uses common clock bindings
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "socionext,milbeaut-m10v-ccu" - for M10V SoC
> +- reg: shall contain base address and length of clock registers
> +- #clock-cells: shall be 1
> +- clocks: shall be an external clock
> +
> +Example: Clock controller node:
> +
> +       clk: m10v-clk-ctrl@1d021000 {
> +               compatible = "socionext,milbeaut-m10v-clk-ccu";

I thought there was some length limit on compatible string names. 32
bytes? Just barely under!
Stephen Boyd Feb. 13, 2019, 6:07 p.m. UTC | #2
Quoting Stephen Boyd (2019-02-13 09:55:34)
> The subject seems to have been cut off? "ndings"?
> 
> Quoting Sugaya Taichi (2019-02-08 04:27:03)
> > diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.txt b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
> > new file mode 100644
> > index 0000000..bcfc5df
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
> > @@ -0,0 +1,49 @@
> > +Milbeaut SoCs Clock Controller Binding
> > +----------------------------------------
> > +Milbeaut SoCs Clock controller is an integrated clock controller, which
> > +generates and supplies to all modules.
> > +
> > +This binding uses common clock bindings
> > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > +
> > +Required properties:
> > +- compatible: should be one of the following:
> > +    "socionext,milbeaut-m10v-ccu" - for M10V SoC
> > +- reg: shall contain base address and length of clock registers
> > +- #clock-cells: shall be 1
> > +- clocks: shall be an external clock
> > +
> > +Example: Clock controller node:
> > +
> > +       clk: m10v-clk-ctrl@1d021000 {
> > +               compatible = "socionext,milbeaut-m10v-clk-ccu";
> 
> I thought there was some length limit on compatible string names. 32
> bytes? Just barely under!
> 

Ah I'm wrong. Compatible is 128. Good.

Seems I was thinking of DT property names.
Sugaya Taichi Feb. 14, 2019, 12:43 a.m. UTC | #3
Hi,

On 2019/02/14 3:07, Stephen Boyd wrote:
> Quoting Stephen Boyd (2019-02-13 09:55:34)
>> The subject seems to have been cut off? "ndings"?
>>
>> Quoting Sugaya Taichi (2019-02-08 04:27:03)
>>> diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.txt b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
>>> new file mode 100644
>>> index 0000000..bcfc5df
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
>>> @@ -0,0 +1,49 @@
>>> +Milbeaut SoCs Clock Controller Binding
>>> +----------------------------------------
>>> +Milbeaut SoCs Clock controller is an integrated clock controller, which
>>> +generates and supplies to all modules.
>>> +
>>> +This binding uses common clock bindings
>>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>> +
>>> +Required properties:
>>> +- compatible: should be one of the following:
>>> +    "socionext,milbeaut-m10v-ccu" - for M10V SoC
>>> +- reg: shall contain base address and length of clock registers
>>> +- #clock-cells: shall be 1
>>> +- clocks: shall be an external clock
>>> +
>>> +Example: Clock controller node:
>>> +
>>> +       clk: m10v-clk-ctrl@1d021000 {
>>> +               compatible = "socionext,milbeaut-m10v-clk-ccu";
>>
>> I thought there was some length limit on compatible string names. 32
>> bytes? Just barely under!
>>
> 
> Ah I'm wrong. Compatible is 128. Good.
> 
> Seems I was thinking of DT property names.
> 

Sorry confusing you.
I accidently deleted "dt-bi" from subject when committing.
I repair the string in the next version.

Thanks,
Sugaya Taichi
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.txt b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
new file mode 100644
index 0000000..bcfc5df
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
@@ -0,0 +1,49 @@ 
+Milbeaut SoCs Clock Controller Binding
+----------------------------------------
+Milbeaut SoCs Clock controller is an integrated clock controller, which
+generates and supplies to all modules.
+
+This binding uses common clock bindings
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,milbeaut-m10v-ccu" - for M10V SoC
+- reg: shall contain base address and length of clock registers
+- #clock-cells: shall be 1
+- clocks: shall be an external clock
+
+Example: Clock controller node:
+
+	clk: m10v-clk-ctrl@1d021000 {
+		compatible = "socionext,milbeaut-m10v-clk-ccu";
+		reg = <0x1d021000 0x4000>;
+		#clock-cells = <1>
+		clocks = <&clki40mhz>
+	};
+
+Example: Required an external clock for Clock controller node:
+
+	clocks {
+		clki40mhz: clki40mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <40000000>;
+		};
+
+		/* other clocks */
+	};
+
+The clock consumer shall specify the desired clock-output of the clock
+controller as below by specifying output-id in its "clk" phandle cell.
+2: uart
+4: 32-bit timer
+
+Example: uart1 node:
+	uart1: serial@1e700010 {
+		compatible = "socionext,milbeaut-usio-uart";
+		reg = <0x1e700010 0x10>;
+		interrupts = <0 141 0x4>, <0 149 0x4>;
+		interrupt-names = "rx", "tx";
+		clocks = <&clk 2>;
+	};